/** Copyright (C) SEGGER Microcontroller GmbH */ /* << EST */ /********************************************************************* * SEGGER Microcontroller GmbH * * The Embedded Experts * ********************************************************************** * * * (c) 1995 - 2024 SEGGER Microcontroller GmbH * * * * www.segger.com Support: support@segger.com * * * ********************************************************************** * * * SEGGER SystemView * Real-time application analysis * * * ********************************************************************** * * * All rights reserved. * * * * SEGGER strongly recommends to not make any changes * * to or modify the source code of this software in order to stay * * compatible with the SystemView and RTT protocol, and J-Link. * * * * Redistribution and use in source and binary forms, with or * * without modification, are permitted provided that the following * * condition is met: * * * * o Redistributions of source code must retain the above copyright * * notice, this condition and the following disclaimer. * * * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND * * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * * DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR * * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * * DAMAGE. * * * ********************************************************************** * * * SystemView version: 3.56 * * * ********************************************************************** -------------------------- END-OF-HEADER ----------------------------- File : SEGGER_SYSVIEW_Conf.h Purpose : SEGGER SystemView configuration file. Set defines which deviate from the defaults (see SEGGER_SYSVIEW_ConfDefaults.h) here. Revision: $Rev: 21292 $ Additional information: Required defines which must be set are: SEGGER_SYSVIEW_GET_TIMESTAMP SEGGER_SYSVIEW_GET_INTERRUPT_ID For known compilers and cores, these might be set to good defaults in SEGGER_SYSVIEW_ConfDefaults.h. SystemView needs a (nestable) locking mechanism. If not defined, the RTT locking mechanism is used, which then needs to be properly configured. */ #ifndef SEGGER_SYSVIEW_CONF_H #define SEGGER_SYSVIEW_CONF_H #include "SEGGER_RTT_Conf.h" /* << EST */ #include "McuSystemViewconfig.h" /* << EST configuration */ /********************************************************************* * * Defines, configurable * ********************************************************************** */ // // Constants for known core configuration // #define SEGGER_SYSVIEW_CORE_OTHER 0 #define SEGGER_SYSVIEW_CORE_CM0 1 // Cortex-M0/M0+/M1 #define SEGGER_SYSVIEW_CORE_CM3 2 // Cortex-M3/M4/M7 #define SEGGER_SYSVIEW_CORE_RX 3 // Renesas RX #if (defined __SES_ARM) || (defined __CROSSWORKS_ARM) || (defined __GNUC__) || (defined __clang__) #if (defined __ARM_ARCH_6M__) || (defined __ARM_ARCH_8M_BASE__) #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM0 #elif (defined(__ARM_ARCH_7M__) || defined(__ARM_ARCH_7EM__) || defined(__ARM_ARCH_8M_MAIN__)) #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM3 #endif #elif defined(__ICCARM__) #if (defined (__ARM6M__) && (__CORE__ == __ARM6M__)) \ || (defined (__ARM8M_BASELINE__) && (__CORE__ == __ARM8M_BASELINE__)) #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM0 #elif (defined (__ARM7EM__) && (__CORE__ == __ARM7EM__)) \ || (defined (__ARM7M__) && (__CORE__ == __ARM7M__)) \ || (defined (__ARM8M_MAINLINE__) && (__CORE__ == __ARM8M_MAINLINE__)) \ || (defined (__ARM8M_MAINLINE__) && (__CORE__ == __ARM8M_MAINLINE__)) #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM3 #endif #elif defined(__CC_ARM) #if (defined(__TARGET_ARCH_6S_M)) #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM0 #elif (defined(__TARGET_ARCH_7_M) || defined(__TARGET_ARCH_7E_M)) #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM3 #endif #elif defined(__TI_ARM__) #ifdef __TI_ARM_V6M0__ #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM0 #elif (defined(__TI_ARM_V7M3__) || defined(__TI_ARM_V7M4__)) #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM3 #endif #elif defined(__ICCRX__) #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_RX #elif defined(__RX) #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_RX #endif #ifndef SEGGER_SYSVIEW_CORE #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_OTHER #endif #ifndef SEGGER_SYSVIEW_ON_EVENT_RECORDED #define SEGGER_SYSVIEW_ON_EVENT_RECORDED(NumBytes) // Needed for SystemView via non-J-Link Recorder. Macro to enable the UART or notify IP task. #endif /********************************************************************* * * Defines, configurable * ********************************************************************** */ /********************************************************************* * * SystemView buffer configuration */ #ifndef SEGGER_SYSVIEW_RTT_BUFFER_SIZE //#define SEGGER_SYSVIEW_RTT_BUFFER_SIZE 1024 // Number of bytes that SystemView uses for the buffer. #define SEGGER_SYSVIEW_RTT_BUFFER_SIZE McuSystemView_CONFIG_RTT_BUFFER_SIZE // << EST: Number of bytes that SystemView uses for the buffer. #endif #ifndef SEGGER_SYSVIEW_RTT_CHANNEL //#define SEGGER_SYSVIEW_RTT_CHANNEL 1 // The RTT channel that SystemView will use. 0: Auto selection #define SEGGER_SYSVIEW_RTT_CHANNEL McuSystemView_CONFIG_RTT_CHANNEL // << EST: The RTT channel that SystemView will use. 0: Auto selection #if configUSE_SEGGER_SYSTEM_VIEWER_HOOKS && SEGGER_SYSVIEW_RTT_CHANNEL>=SEGGER_RTT_MAX_NUM_UP_BUFFERS /* << EST */ #error "Not enough RTT buffers allocated in SEGGER_RTT_Conf.h!" #endif #endif #ifndef SEGGER_SYSVIEW_USE_STATIC_BUFFER // #define SEGGER_SYSVIEW_USE_STATIC_BUFFER 1 // Use a static buffer to generate events instead of a buffer on the stack #define SEGGER_SYSVIEW_USE_STATIC_BUFFER McuSystemView_CONFIG_USE_STATIC_BUFFER // << EST: 1: Use a static buffer to generate events instead of a buffer on the stack #endif #ifndef SEGGER_SYSVIEW_POST_MORTEM_MODE //#define SEGGER_SYSVIEW_POST_MORTEM_MODE 0 // 1: Enable post mortem analysis mode #define SEGGER_SYSVIEW_POST_MORTEM_MODE McuSystemView_CONFIG_POST_MORTEM_MODE // << EST: 1: Enable post mortem analysis mode #endif #ifndef SEGGER_SYSVIEW_CAN_RESTART #define SEGGER_SYSVIEW_CAN_RESTART 1 // 1: Send the SystemView start sequence on every start command, not just on the first. Enables restart when SystemView Application disconnected unexpectedly. #endif /********************************************************************* * * SystemView timestamp configuration */ #if !defined(SEGGER_SYSVIEW_GET_TIMESTAMP) && !defined(SEGGER_SYSVIEW_TIMESTAMP_BITS) #if SEGGER_SYSVIEW_CORE == SEGGER_SYSVIEW_CORE_CM3 #define SEGGER_SYSVIEW_TIMESTAMP_SHIFT 4 /* << EST */ //#define SEGGER_SYSVIEW_GET_TIMESTAMP() (*(U32 *)(0xE0001004)) // Retrieve a system timestamp. Cortex-M cycle counter. #define SEGGER_SYSVIEW_GET_TIMESTAMP() ((*(U32 *)(0xE0001004))>>SEGGER_SYSVIEW_TIMESTAMP_SHIFT) // << EST: Retrieve a system timestamp. Cortex-M cycle counter. Shifted by 4 to save bandwith. #define SEGGER_SYSVIEW_TIMESTAMP_BITS 32 // Define number of valid bits low-order delivered by clock source #else #define SEGGER_SYSVIEW_TIMESTAMP_SHIFT 0 /* << EST */ #define SEGGER_SYSVIEW_GET_TIMESTAMP() SEGGER_SYSVIEW_X_GetTimestamp() // Retrieve a system timestamp via user-defined function #define SEGGER_SYSVIEW_TIMESTAMP_BITS 32 // Define number of valid bits low-order delivered by SEGGER_SYSVIEW_X_GetTimestamp() #endif #endif /********************************************************************* * * SystemView Id configuration */ #ifndef SEGGER_SYSVIEW_ID_BASE //#define SEGGER_SYSVIEW_ID_BASE 0x10000000 // Default value for the lowest Id reported by the application. Can be overridden by the application via SEGGER_SYSVIEW_SetRAMBase(). (i.e. 0x20000000 when all Ids are an address in this RAM) #define SEGGER_SYSVIEW_ID_BASE (0x10000000) // << EST: Default value for the lowest Id reported by the application. Can be overridden by the application via SEGGER_SYSVIEW_SetRAMBase(). (i.e. 0x20000000 when all Ids are an address in this RAM) #endif #ifndef SEGGER_SYSVIEW_ID_SHIFT //#define SEGGER_SYSVIEW_ID_SHIFT 2 // Number of bits to shift the Id to save bandwidth. (i.e. 2 when Ids are 4 byte aligned) #define SEGGER_SYSVIEW_ID_SHIFT (2) // << EST: Number of bits to shift the Id to save bandwidth. (i.e. 2 when Ids are 4 byte aligned) #endif /********************************************************************* * * SystemView interrupt configuration */ #ifndef SEGGER_SYSVIEW_GET_INTERRUPT_ID #if SEGGER_SYSVIEW_CORE == SEGGER_SYSVIEW_CORE_CM3 #define SEGGER_SYSVIEW_GET_INTERRUPT_ID() ((*(U32*)(0xE000ED04)) & 0x1FF) // Get the currently active interrupt Id. (i.e. read Cortex-M ICSR[8:0] = active vector) #elif SEGGER_SYSVIEW_CORE == SEGGER_SYSVIEW_CORE_CM0 #if defined(__ICCARM__) #if (__VER__ > 6010000) #define SEGGER_SYSVIEW_GET_INTERRUPT_ID() (__get_IPSR()) // Workaround for IAR, which might do a byte-access to 0xE000ED04. Read IPSR instead. #else #define SEGGER_SYSVIEW_GET_INTERRUPT_ID() ((*(U32*)(0xE000ED04)) & 0x3F) // Older versions of IAR do not include __get_IPSR, but might also not optimize to byte-access. #endif #else #define SEGGER_SYSVIEW_GET_INTERRUPT_ID() ((*(U32*)(0xE000ED04)) & 0x3F) // Get the currently active interrupt Id. (i.e. read Cortex-M ICSR[5:0] = active vector) #endif #else #define SEGGER_SYSVIEW_GET_INTERRUPT_ID() SEGGER_SYSVIEW_X_GetInterruptId() // Get the currently active interrupt Id from the user-provided function. #endif #endif #if 1 /* << EST */ uint32_t SEGGER_uxGetTickCounterValue(void); #define SEGGER_SYSVIEW_PRINTF_IMPLICIT_FORMAT 0 #endif /* << EST */ #endif // SEGGER_SYSVIEW_CONF_H /*************************** End of file ****************************/