1016 lines
46 KiB
C
1016 lines
46 KiB
C
|
/**
|
||
|
|
******************************************************************************
|
||
|
|
* @file stm32f7xx_hal_rtc_ex.h
|
||
|
|
* @author MCD Application Team
|
||
|
|
* @brief Header file of RTC HAL Extension module.
|
||
|
|
******************************************************************************
|
||
|
|
* @attention
|
||
|
|
*
|
||
|
|
* Copyright (c) 2017 STMicroelectronics.
|
||
|
|
* All rights reserved.
|
||
|
|
*
|
||
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
||
|
|
* in the root directory of this software component.
|
||
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||
|
|
*
|
||
|
|
******************************************************************************
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
||
|
|
#ifndef __STM32F7xx_HAL_RTC_EX_H
|
||
|
|
#define __STM32F7xx_HAL_RTC_EX_H
|
||
|
|
|
||
|
|
#ifdef __cplusplus
|
||
|
|
extern "C" {
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/* Includes ------------------------------------------------------------------*/
|
||
|
|
#include "stm32f7xx_hal_def.h"
|
||
|
|
|
||
|
|
/** @addtogroup STM32F7xx_HAL_Driver
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup RTCEx
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Exported types ------------------------------------------------------------*/
|
||
|
|
/** @defgroup RTCEx_Exported_Types RTCEx Exported Types
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief RTC Tamper structure definition
|
||
|
|
*/
|
||
|
|
typedef struct
|
||
|
|
{
|
||
|
|
uint32_t Tamper; /*!< Specifies the Tamper Pin.
|
||
|
|
This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions */
|
||
|
|
|
||
|
|
uint32_t Interrupt; /*!< Specifies the Tamper Interrupt.
|
||
|
|
This parameter can be a value of @ref RTCEx_Tamper_Interrupt_Definitions */
|
||
|
|
|
||
|
|
uint32_t Trigger; /*!< Specifies the Tamper Trigger.
|
||
|
|
This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */
|
||
|
|
|
||
|
|
uint32_t NoErase; /*!< Specifies the Tamper no erase mode.
|
||
|
|
This parameter can be a value of @ref RTCEx_Tamper_EraseBackUp_Definitions */
|
||
|
|
|
||
|
|
uint32_t MaskFlag; /*!< Specifies the Tamper Flag masking.
|
||
|
|
This parameter can be a value of @ref RTCEx_Tamper_MaskFlag_Definitions */
|
||
|
|
|
||
|
|
uint32_t Filter; /*!< Specifies the RTC Filter Tamper.
|
||
|
|
This parameter can be a value of @ref RTCEx_Tamper_Filter_Definitions */
|
||
|
|
|
||
|
|
uint32_t SamplingFrequency; /*!< Specifies the sampling frequency.
|
||
|
|
This parameter can be a value of @ref RTCEx_Tamper_Sampling_Frequencies_Definitions */
|
||
|
|
|
||
|
|
uint32_t PrechargeDuration; /*!< Specifies the Precharge Duration .
|
||
|
|
This parameter can be a value of @ref RTCEx_Tamper_Pin_Precharge_Duration_Definitions */
|
||
|
|
|
||
|
|
uint32_t TamperPullUp; /*!< Specifies the Tamper PullUp .
|
||
|
|
This parameter can be a value of @ref RTCEx_Tamper_Pull_UP_Definitions */
|
||
|
|
|
||
|
|
uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection.
|
||
|
|
This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */
|
||
|
|
}RTC_TamperTypeDef;
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Exported constants --------------------------------------------------------*/
|
||
|
|
/** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup RTCEx_Output_selection_Definitions RTCEx Output selection Definitions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define RTC_OUTPUT_DISABLE ((uint32_t)0x00000000U)
|
||
|
|
#define RTC_OUTPUT_ALARMA ((uint32_t)0x00200000U)
|
||
|
|
#define RTC_OUTPUT_ALARMB ((uint32_t)0x00400000U)
|
||
|
|
#define RTC_OUTPUT_WAKEUP ((uint32_t)0x00600000U)
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup RTCEx_Backup_Registers_Definitions RTC Backup Registers Definitions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define RTC_BKP_DR0 ((uint32_t)0x00000000U)
|
||
|
|
#define RTC_BKP_DR1 ((uint32_t)0x00000001U)
|
||
|
|
#define RTC_BKP_DR2 ((uint32_t)0x00000002U)
|
||
|
|
#define RTC_BKP_DR3 ((uint32_t)0x00000003U)
|
||
|
|
#define RTC_BKP_DR4 ((uint32_t)0x00000004U)
|
||
|
|
#define RTC_BKP_DR5 ((uint32_t)0x00000005U)
|
||
|
|
#define RTC_BKP_DR6 ((uint32_t)0x00000006U)
|
||
|
|
#define RTC_BKP_DR7 ((uint32_t)0x00000007U)
|
||
|
|
#define RTC_BKP_DR8 ((uint32_t)0x00000008U)
|
||
|
|
#define RTC_BKP_DR9 ((uint32_t)0x00000009U)
|
||
|
|
#define RTC_BKP_DR10 ((uint32_t)0x0000000AU)
|
||
|
|
#define RTC_BKP_DR11 ((uint32_t)0x0000000BU)
|
||
|
|
#define RTC_BKP_DR12 ((uint32_t)0x0000000CU)
|
||
|
|
#define RTC_BKP_DR13 ((uint32_t)0x0000000DU)
|
||
|
|
#define RTC_BKP_DR14 ((uint32_t)0x0000000EU)
|
||
|
|
#define RTC_BKP_DR15 ((uint32_t)0x0000000FU)
|
||
|
|
#define RTC_BKP_DR16 ((uint32_t)0x00000010U)
|
||
|
|
#define RTC_BKP_DR17 ((uint32_t)0x00000011U)
|
||
|
|
#define RTC_BKP_DR18 ((uint32_t)0x00000012U)
|
||
|
|
#define RTC_BKP_DR19 ((uint32_t)0x00000013U)
|
||
|
|
#define RTC_BKP_DR20 ((uint32_t)0x00000014U)
|
||
|
|
#define RTC_BKP_DR21 ((uint32_t)0x00000015U)
|
||
|
|
#define RTC_BKP_DR22 ((uint32_t)0x00000016U)
|
||
|
|
#define RTC_BKP_DR23 ((uint32_t)0x00000017U)
|
||
|
|
#define RTC_BKP_DR24 ((uint32_t)0x00000018U)
|
||
|
|
#define RTC_BKP_DR25 ((uint32_t)0x00000019U)
|
||
|
|
#define RTC_BKP_DR26 ((uint32_t)0x0000001AU)
|
||
|
|
#define RTC_BKP_DR27 ((uint32_t)0x0000001BU)
|
||
|
|
#define RTC_BKP_DR28 ((uint32_t)0x0000001CU)
|
||
|
|
#define RTC_BKP_DR29 ((uint32_t)0x0000001DU)
|
||
|
|
#define RTC_BKP_DR30 ((uint32_t)0x0000001EU)
|
||
|
|
#define RTC_BKP_DR31 ((uint32_t)0x0000001FU)
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup RTCEx_Time_Stamp_Edges_definitions RTCEx Time Stamp Edges definitions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define RTC_TIMESTAMPEDGE_RISING ((uint32_t)0x00000000U)
|
||
|
|
#define RTC_TIMESTAMPEDGE_FALLING ((uint32_t)0x00000008U)
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup RTCEx_Tamper_Pins_Definitions RTCEx Tamper Pins Definitions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define RTC_TAMPER_1 RTC_TAMPCR_TAMP1E
|
||
|
|
#define RTC_TAMPER_2 RTC_TAMPCR_TAMP2E
|
||
|
|
#define RTC_TAMPER_3 RTC_TAMPCR_TAMP3E
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup RTCEx_Tamper_Interrupt_Definitions RTCEx Tamper Interrupt Definitions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define RTC_TAMPER1_INTERRUPT RTC_TAMPCR_TAMP1IE
|
||
|
|
#define RTC_TAMPER2_INTERRUPT RTC_TAMPCR_TAMP2IE
|
||
|
|
#define RTC_TAMPER3_INTERRUPT RTC_TAMPCR_TAMP3IE
|
||
|
|
#define RTC_ALL_TAMPER_INTERRUPT RTC_TAMPCR_TAMPIE
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup RTCEx_TimeStamp_Pin_Selection RTCEx TimeStamp Pin Selection
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define RTC_TIMESTAMPPIN_DEFAULT ((uint32_t)0x00000000U)
|
||
|
|
#define RTC_TIMESTAMPPIN_POS1 ((uint32_t)0x00000002U)
|
||
|
|
#define RTC_TIMESTAMPPIN_POS2 ((uint32_t)0x00000004U)
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup RTCEx_Tamper_Trigger_Definitions RTCEx Tamper Trigger Definitions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define RTC_TAMPERTRIGGER_RISINGEDGE ((uint32_t)0x00000000U)
|
||
|
|
#define RTC_TAMPERTRIGGER_FALLINGEDGE ((uint32_t)0x00000002U)
|
||
|
|
#define RTC_TAMPERTRIGGER_LOWLEVEL RTC_TAMPERTRIGGER_RISINGEDGE
|
||
|
|
#define RTC_TAMPERTRIGGER_HIGHLEVEL RTC_TAMPERTRIGGER_FALLINGEDGE
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup RTCEx_Tamper_EraseBackUp_Definitions RTCEx Tamper EraseBackUp Definitions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define RTC_TAMPER_ERASE_BACKUP_ENABLE ((uint32_t)0x00000000U)
|
||
|
|
#define RTC_TAMPER_ERASE_BACKUP_DISABLE ((uint32_t)0x00020000U)
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup RTCEx_Tamper_MaskFlag_Definitions RTCEx Tamper MaskFlag Definitions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define RTC_TAMPERMASK_FLAG_DISABLE ((uint32_t)0x00000000U)
|
||
|
|
#define RTC_TAMPERMASK_FLAG_ENABLE ((uint32_t)0x00040000U)
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup RTCEx_Tamper_Filter_Definitions RTCEx Tamper Filter Definitions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define RTC_TAMPERFILTER_DISABLE ((uint32_t)0x00000000U) /*!< Tamper filter is disabled */
|
||
|
|
|
||
|
|
#define RTC_TAMPERFILTER_2SAMPLE ((uint32_t)0x00000800U) /*!< Tamper is activated after 2
|
||
|
|
consecutive samples at the active level */
|
||
|
|
#define RTC_TAMPERFILTER_4SAMPLE ((uint32_t)0x00001000U) /*!< Tamper is activated after 4
|
||
|
|
consecutive samples at the active level */
|
||
|
|
#define RTC_TAMPERFILTER_8SAMPLE ((uint32_t)0x00001800U) /*!< Tamper is activated after 8
|
||
|
|
consecutive samples at the active leve. */
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup RTCEx_Tamper_Sampling_Frequencies_Definitions RTCEx Tamper Sampling Frequencies Definitions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768 ((uint32_t)0x00000000U) /*!< Each of the tamper inputs are sampled
|
||
|
|
with a frequency = RTCCLK / 32768 */
|
||
|
|
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384 ((uint32_t)0x00000100U) /*!< Each of the tamper inputs are sampled
|
||
|
|
with a frequency = RTCCLK / 16384 */
|
||
|
|
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192 ((uint32_t)0x00000200U) /*!< Each of the tamper inputs are sampled
|
||
|
|
with a frequency = RTCCLK / 8192 */
|
||
|
|
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096 ((uint32_t)0x00000300U) /*!< Each of the tamper inputs are sampled
|
||
|
|
with a frequency = RTCCLK / 4096 */
|
||
|
|
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048 ((uint32_t)0x00000400U) /*!< Each of the tamper inputs are sampled
|
||
|
|
with a frequency = RTCCLK / 2048 */
|
||
|
|
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024 ((uint32_t)0x00000500U) /*!< Each of the tamper inputs are sampled
|
||
|
|
with a frequency = RTCCLK / 1024 */
|
||
|
|
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512 ((uint32_t)0x00000600U) /*!< Each of the tamper inputs are sampled
|
||
|
|
with a frequency = RTCCLK / 512 */
|
||
|
|
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256 ((uint32_t)0x00000700U) /*!< Each of the tamper inputs are sampled
|
||
|
|
with a frequency = RTCCLK / 256 */
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup RTCEx_Tamper_Pin_Precharge_Duration_Definitions RTCEx Tamper Pin Precharge Duration Definitions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define RTC_TAMPERPRECHARGEDURATION_1RTCCLK ((uint32_t)0x00000000U) /*!< Tamper pins are pre-charged before
|
||
|
|
sampling during 1 RTCCLK cycle */
|
||
|
|
#define RTC_TAMPERPRECHARGEDURATION_2RTCCLK ((uint32_t)0x00002000U) /*!< Tamper pins are pre-charged before
|
||
|
|
sampling during 2 RTCCLK cycles */
|
||
|
|
#define RTC_TAMPERPRECHARGEDURATION_4RTCCLK ((uint32_t)0x00004000U) /*!< Tamper pins are pre-charged before
|
||
|
|
sampling during 4 RTCCLK cycles */
|
||
|
|
#define RTC_TAMPERPRECHARGEDURATION_8RTCCLK ((uint32_t)0x00006000U) /*!< Tamper pins are pre-charged before
|
||
|
|
sampling during 8 RTCCLK cycles */
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions RTCEx Tamper TimeStampOnTamperDetection Definitions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE ((uint32_t)RTC_TAMPCR_TAMPTS) /*!< TimeStamp on Tamper Detection event saved */
|
||
|
|
#define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE ((uint32_t)0x00000000U) /*!< TimeStamp on Tamper Detection event is not saved */
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup RTCEx_Tamper_Pull_UP_Definitions RTCEx Tamper Pull UP Definitions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define RTC_TAMPER_PULLUP_ENABLE ((uint32_t)0x00000000U) /*!< TimeStamp on Tamper Detection event saved */
|
||
|
|
#define RTC_TAMPER_PULLUP_DISABLE ((uint32_t)RTC_TAMPCR_TAMPPUDIS) /*!< TimeStamp on Tamper Detection event is not saved */
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup RTCEx_Wakeup_Timer_Definitions RTCEx Wakeup Timer Definitions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define RTC_WAKEUPCLOCK_RTCCLK_DIV16 ((uint32_t)0x00000000U)
|
||
|
|
#define RTC_WAKEUPCLOCK_RTCCLK_DIV8 ((uint32_t)0x00000001U)
|
||
|
|
#define RTC_WAKEUPCLOCK_RTCCLK_DIV4 ((uint32_t)0x00000002U)
|
||
|
|
#define RTC_WAKEUPCLOCK_RTCCLK_DIV2 ((uint32_t)0x00000003U)
|
||
|
|
#define RTC_WAKEUPCLOCK_CK_SPRE_16BITS ((uint32_t)0x00000004U)
|
||
|
|
#define RTC_WAKEUPCLOCK_CK_SPRE_17BITS ((uint32_t)0x00000006U)
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup RTCEx_Smooth_calib_period_Definitions RTCEx Smooth calib period Definitions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define RTC_SMOOTHCALIB_PERIOD_32SEC ((uint32_t)0x00000000U) /*!< If RTCCLK = 32768 Hz, Smooth calibration
|
||
|
|
period is 32s, else 2exp20 RTCCLK seconds */
|
||
|
|
#define RTC_SMOOTHCALIB_PERIOD_16SEC ((uint32_t)0x00002000U) /*!< If RTCCLK = 32768 Hz, Smooth calibration
|
||
|
|
period is 16s, else 2exp19 RTCCLK seconds */
|
||
|
|
#define RTC_SMOOTHCALIB_PERIOD_8SEC ((uint32_t)0x00004000U) /*!< If RTCCLK = 32768 Hz, Smooth calibration
|
||
|
|
period is 8s, else 2exp18 RTCCLK seconds */
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTCEx Smooth calib Plus pulses Definitions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define RTC_SMOOTHCALIB_PLUSPULSES_SET ((uint32_t)0x00008000U) /*!< The number of RTCCLK pulses added
|
||
|
|
during a X -second window = Y - CALM[8:0]
|
||
|
|
with Y = 512, 256, 128 when X = 32, 16, 8 */
|
||
|
|
#define RTC_SMOOTHCALIB_PLUSPULSES_RESET ((uint32_t)0x00000000U) /*!< The number of RTCCLK pulses subbstited
|
||
|
|
during a 32-second window = CALM[8:0] */
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup RTCEx_Add_1_Second_Parameter_Definitions RTCEx Add 1 Second Parameter Definitions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define RTC_SHIFTADD1S_RESET ((uint32_t)0x00000000U)
|
||
|
|
#define RTC_SHIFTADD1S_SET ((uint32_t)0x80000000U)
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup RTCEx_Calib_Output_selection_Definitions RTCEx Calib Output selection Definitions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define RTC_CALIBOUTPUT_512HZ ((uint32_t)0x00000000U)
|
||
|
|
#define RTC_CALIBOUTPUT_1HZ ((uint32_t)0x00080000U)
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Exported macros -----------------------------------------------------------*/
|
||
|
|
/** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable the RTC WakeUp Timer peripheral.
|
||
|
|
* @param __HANDLE__ specifies the RTC handle.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable the RTC WakeUp Timer peripheral.
|
||
|
|
* @param __HANDLE__ specifies the RTC handle.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable the RTC WakeUpTimer interrupt.
|
||
|
|
* @param __HANDLE__ specifies the RTC handle.
|
||
|
|
* @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
|
||
|
|
* This parameter can be:
|
||
|
|
* @arg RTC_IT_WUT: WakeUpTimer interrupt
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable the RTC WakeUpTimer interrupt.
|
||
|
|
* @param __HANDLE__ specifies the RTC handle.
|
||
|
|
* @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
|
||
|
|
* This parameter can be:
|
||
|
|
* @arg RTC_IT_WUT: WakeUpTimer interrupt
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not.
|
||
|
|
* @param __HANDLE__ specifies the RTC handle.
|
||
|
|
* @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt sources to check.
|
||
|
|
* This parameter can be:
|
||
|
|
* @arg RTC_IT_WUT: WakeUpTimer interrupt
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET) ? SET : RESET)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Check whether the specified RTC Wake Up timer interrupt has been enabled or not.
|
||
|
|
* @param __HANDLE__ specifies the RTC handle.
|
||
|
|
* @param __INTERRUPT__ specifies the RTC Wake Up timer interrupt sources to check.
|
||
|
|
* This parameter can be:
|
||
|
|
* @arg RTC_IT_WUT: WakeUpTimer interrupt
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Get the selected RTC WakeUpTimer's flag status.
|
||
|
|
* @param __HANDLE__ specifies the RTC handle.
|
||
|
|
* @param __FLAG__ specifies the RTC WakeUpTimer Flag is pending or not.
|
||
|
|
* This parameter can be:
|
||
|
|
* @arg RTC_FLAG_WUTF
|
||
|
|
* @arg RTC_FLAG_WUTWF
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Clear the RTC Wake Up timer's pending flags.
|
||
|
|
* @param __HANDLE__ specifies the RTC handle.
|
||
|
|
* @param __FLAG__ specifies the RTC WakeUpTimer Flag to clear.
|
||
|
|
* This parameter can be:
|
||
|
|
* @arg RTC_FLAG_WUTF
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable the RTC Tamper1 input detection.
|
||
|
|
* @param __HANDLE__ specifies the RTC handle.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_TAMPER1_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR |= (RTC_TAMPCR_TAMP1E))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable the RTC Tamper1 input detection.
|
||
|
|
* @param __HANDLE__ specifies the RTC handle.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_TAMPER1_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR &= ~(RTC_TAMPCR_TAMP1E))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable the RTC Tamper2 input detection.
|
||
|
|
* @param __HANDLE__ specifies the RTC handle.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_TAMPER2_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR |= (RTC_TAMPCR_TAMP2E))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable the RTC Tamper2 input detection.
|
||
|
|
* @param __HANDLE__ specifies the RTC handle.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_TAMPER2_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR &= ~(RTC_TAMPCR_TAMP2E))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable the RTC Tamper3 input detection.
|
||
|
|
* @param __HANDLE__ specifies the RTC handle.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_TAMPER3_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR |= (RTC_TAMPCR_TAMP3E))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable the RTC Tamper3 input detection.
|
||
|
|
* @param __HANDLE__ specifies the RTC handle.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_TAMPER3_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR &= ~(RTC_TAMPCR_TAMP3E))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Check whether the specified RTC Tamper interrupt has occurred or not.
|
||
|
|
* @param __HANDLE__ specifies the RTC handle.
|
||
|
|
* @param __INTERRUPT__ specifies the RTC Tamper interrupt to check.
|
||
|
|
* This parameter can be:
|
||
|
|
* @arg RTC_IT_TAMP: All tampers interrupts
|
||
|
|
* @arg RTC_IT_TAMP1: Tamper1 interrupt
|
||
|
|
* @arg RTC_IT_TAMP2: Tamper2 interrupt
|
||
|
|
* @arg RTC_IT_TAMP3: Tamper3 interrupt
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) == RTC_IT_TAMP1) ? (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 3)) != RESET) ? SET : RESET) : \
|
||
|
|
((__INTERRUPT__) == RTC_IT_TAMP2) ? (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 5)) != RESET) ? SET : RESET) : \
|
||
|
|
(((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 7)) != RESET) ? SET : RESET))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Check whether the specified RTC Tamper interrupt has been enabled or not.
|
||
|
|
* @param __HANDLE__ specifies the RTC handle.
|
||
|
|
* @param __INTERRUPT__ specifies the RTC Tamper interrupt source to check.
|
||
|
|
* This parameter can be:
|
||
|
|
* @arg RTC_IT_TAMP: All tampers interrupts
|
||
|
|
* @arg RTC_IT_TAMP1: Tamper1 interrupt
|
||
|
|
* @arg RTC_IT_TAMP2: Tamper2 interrupt
|
||
|
|
* @arg RTC_IT_TAMP3: Tamper3 interrupt
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->TAMPCR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Get the selected RTC Tamper's flag status.
|
||
|
|
* @param __HANDLE__ specifies the RTC handle.
|
||
|
|
* @param __FLAG__ specifies the RTC Tamper Flag is pending or not.
|
||
|
|
* This parameter can be:
|
||
|
|
* @arg RTC_FLAG_TAMP1F: Tamper1 flag
|
||
|
|
* @arg RTC_FLAG_TAMP2F: Tamper2 flag
|
||
|
|
* @arg RTC_FLAG_TAMP3F: Tamper3 flag
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Clear the RTC Tamper's pending flags.
|
||
|
|
* @param __HANDLE__ specifies the RTC handle.
|
||
|
|
* @param __FLAG__ specifies the RTC Tamper Flag sources to clear.
|
||
|
|
* This parameter can be:
|
||
|
|
* @arg RTC_FLAG_TAMP1F: Tamper1 flag
|
||
|
|
* @arg RTC_FLAG_TAMP2F: Tamper2 flag
|
||
|
|
* @arg RTC_FLAG_TAMP3F: Tamper3 flag
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable the RTC TimeStamp peripheral.
|
||
|
|
* @param __HANDLE__ specifies the RTC handle.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable the RTC TimeStamp peripheral.
|
||
|
|
* @param __HANDLE__ specifies the RTC handle.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable the RTC TimeStamp interrupt.
|
||
|
|
* @param __HANDLE__ specifies the RTC handle.
|
||
|
|
* @param __INTERRUPT__ specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
|
||
|
|
* This parameter can be:
|
||
|
|
* @arg RTC_IT_TS: TimeStamp interrupt
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable the RTC TimeStamp interrupt.
|
||
|
|
* @param __HANDLE__ specifies the RTC handle.
|
||
|
|
* @param __INTERRUPT__ specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
|
||
|
|
* This parameter can be:
|
||
|
|
* @arg RTC_IT_TS: TimeStamp interrupt
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Check whether the specified RTC TimeStamp interrupt has occurred or not.
|
||
|
|
* @param __HANDLE__ specifies the RTC handle.
|
||
|
|
* @param __INTERRUPT__ specifies the RTC TimeStamp interrupt sources to check.
|
||
|
|
* This parameter can be:
|
||
|
|
* @arg RTC_IT_TS: TimeStamp interrupt
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET) ? SET : RESET)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Check whether the specified RTC Time Stamp interrupt has been enabled or not.
|
||
|
|
* @param __HANDLE__ specifies the RTC handle.
|
||
|
|
* @param __INTERRUPT__ specifies the RTC Time Stamp interrupt source to check.
|
||
|
|
* This parameter can be:
|
||
|
|
* @arg RTC_IT_TS: TimeStamp interrupt
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Get the selected RTC TimeStamp's flag status.
|
||
|
|
* @param __HANDLE__ specifies the RTC handle.
|
||
|
|
* @param __FLAG__ specifies the RTC TimeStamp Flag is pending or not.
|
||
|
|
* This parameter can be:
|
||
|
|
* @arg RTC_FLAG_TSF
|
||
|
|
* @arg RTC_FLAG_TSOVF
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Clear the RTC Time Stamp's pending flags.
|
||
|
|
* @param __HANDLE__ specifies the RTC handle.
|
||
|
|
* @param __FLAG__ specifies the RTC Alarm Flag sources to clear.
|
||
|
|
* This parameter can be:
|
||
|
|
* @arg RTC_FLAG_TSF
|
||
|
|
* @arg RTC_FLAG_TSOVF
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable the RTC internal TimeStamp peripheral.
|
||
|
|
* @param __HANDLE__ specifies the RTC handle.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_INTERNAL_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ITSE))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable the RTC internal TimeStamp peripheral.
|
||
|
|
* @param __HANDLE__ specifies the RTC handle.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_INTERNAL_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ITSE))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Get the selected RTC Internal Time Stamp's flag status.
|
||
|
|
* @param __HANDLE__ specifies the RTC handle.
|
||
|
|
* @param __FLAG__ specifies the RTC Internal Time Stamp Flag is pending or not.
|
||
|
|
* This parameter can be:
|
||
|
|
* @arg RTC_FLAG_ITSF
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_INTERNAL_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Clear the RTC Internal Time Stamp's pending flags.
|
||
|
|
* @param __HANDLE__ specifies the RTC handle.
|
||
|
|
* @param __FLAG__ specifies the RTC Internal Time Stamp Flag source to clear.
|
||
|
|
* This parameter can be:
|
||
|
|
* @arg RTC_FLAG_ITSF
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_INTERNAL_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0003FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable the RTC calibration output.
|
||
|
|
* @param __HANDLE__ specifies the RTC handle.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_COE))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable the calibration output.
|
||
|
|
* @param __HANDLE__ specifies the RTC handle.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable the clock reference detection.
|
||
|
|
* @param __HANDLE__ specifies the RTC handle.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable the clock reference detection.
|
||
|
|
* @param __HANDLE__ specifies the RTC handle.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Get the selected RTC shift operation's flag status.
|
||
|
|
* @param __HANDLE__ specifies the RTC handle.
|
||
|
|
* @param __FLAG__ specifies the RTC shift operation Flag is pending or not.
|
||
|
|
* This parameter can be:
|
||
|
|
* @arg RTC_FLAG_SHPF
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable interrupt on the RTC WakeUp Timer associated Exti line.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable interrupt on the RTC WakeUp Timer associated Exti line.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable event on the RTC WakeUp Timer associated Exti line.
|
||
|
|
* @retval None.
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable event on the RTC WakeUp Timer associated Exti line.
|
||
|
|
* @retval None.
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable falling edge trigger on the RTC WakeUp Timer associated Exti line.
|
||
|
|
* @retval None.
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable falling edge trigger on the RTC WakeUp Timer associated Exti line.
|
||
|
|
* @retval None.
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable rising edge trigger on the RTC WakeUp Timer associated Exti line.
|
||
|
|
* @retval None.
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable rising edge trigger on the RTC WakeUp Timer associated Exti line.
|
||
|
|
* @retval None.
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line.
|
||
|
|
* @retval None.
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE();
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line.
|
||
|
|
* This parameter can be:
|
||
|
|
* @retval None.
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE();
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Check whether the RTC WakeUp Timer associated Exti line interrupt flag is set or not.
|
||
|
|
* @retval Line Status.
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Clear the RTC WakeUp Timer associated Exti line flag.
|
||
|
|
* @retval None.
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Generate a Software interrupt on the RTC WakeUp Timer associated Exti line.
|
||
|
|
* @retval None.
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable interrupt on the RTC Tamper and Timestamp associated Exti line.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable interrupt on the RTC Tamper and Timestamp associated Exti line.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable event on the RTC Tamper and Timestamp associated Exti line.
|
||
|
|
* @retval None.
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable event on the RTC Tamper and Timestamp associated Exti line.
|
||
|
|
* @retval None.
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
|
||
|
|
* @retval None.
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
|
||
|
|
* @retval None.
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.
|
||
|
|
* @retval None.
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.
|
||
|
|
* @retval None.
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
|
||
|
|
* @retval None.
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE();
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
|
||
|
|
* This parameter can be:
|
||
|
|
* @retval None.
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE();
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Check whether the RTC Tamper and Timestamp associated Exti line interrupt flag is set or not.
|
||
|
|
* @retval Line Status.
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Clear the RTC Tamper and Timestamp associated Exti line flag.
|
||
|
|
* @retval None.
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Generate a Software interrupt on the RTC Tamper and Timestamp associated Exti line
|
||
|
|
* @retval None.
|
||
|
|
*/
|
||
|
|
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Exported functions --------------------------------------------------------*/
|
||
|
|
/** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup RTCEx_Exported_Functions_Group1
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* RTC TimeStamp and Tamper functions *****************************************/
|
||
|
|
HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
|
||
|
|
HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
|
||
|
|
HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc);
|
||
|
|
HAL_StatusTypeDef HAL_RTCEx_SetInternalTimeStamp(RTC_HandleTypeDef *hrtc);
|
||
|
|
HAL_StatusTypeDef HAL_RTCEx_DeactivateInternalTimeStamp(RTC_HandleTypeDef *hrtc);
|
||
|
|
HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format);
|
||
|
|
|
||
|
|
HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
|
||
|
|
HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
|
||
|
|
HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper);
|
||
|
|
void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc);
|
||
|
|
|
||
|
|
void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc);
|
||
|
|
void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc);
|
||
|
|
void HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc);
|
||
|
|
void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc);
|
||
|
|
HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
|
||
|
|
HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
|
||
|
|
HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
|
||
|
|
HAL_StatusTypeDef HAL_RTCEx_PollForTamper3Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup RTCEx_Exported_Functions_Group2
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
/* RTC Wake-up functions ******************************************************/
|
||
|
|
HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
|
||
|
|
HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
|
||
|
|
uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc);
|
||
|
|
uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc);
|
||
|
|
void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc);
|
||
|
|
void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc);
|
||
|
|
HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup RTCEx_Exported_Functions_Group3
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
/* Extension Control functions ************************************************/
|
||
|
|
void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data);
|
||
|
|
uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister);
|
||
|
|
|
||
|
|
HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue);
|
||
|
|
HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS);
|
||
|
|
HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput);
|
||
|
|
HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc);
|
||
|
|
HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc);
|
||
|
|
HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc);
|
||
|
|
HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc);
|
||
|
|
HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc);
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup RTCEx_Exported_Functions_Group4
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
/* Extension RTC features functions *******************************************/
|
||
|
|
void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc);
|
||
|
|
HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
/* Private types -------------------------------------------------------------*/
|
||
|
|
/* Private variables ---------------------------------------------------------*/
|
||
|
|
/* Private constants ---------------------------------------------------------*/
|
||
|
|
/** @defgroup RTCEx_Private_Constants RTCEx Private Constants
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT ((uint32_t)EXTI_IMR_IM21) /*!< External interrupt line 21 Connected to the RTC Tamper and Time Stamp events */
|
||
|
|
#define RTC_EXTI_LINE_WAKEUPTIMER_EVENT ((uint32_t)EXTI_IMR_IM22) /*!< External interrupt line 22 Connected to the RTC Wake-up event */
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Private constants ---------------------------------------------------------*/
|
||
|
|
/** @defgroup RTCEx_Private_Constants RTCEx Private Constants
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
/* Masks Definition */
|
||
|
|
#define RTC_TAMPCR_TAMPXE ((uint32_t) (RTC_TAMPCR_TAMP3E | RTC_TAMPCR_TAMP2E | RTC_TAMPCR_TAMP1E))
|
||
|
|
#define RTC_TAMPCR_TAMPXIE ((uint32_t) (RTC_TAMPER1_INTERRUPT | RTC_TAMPER2_INTERRUPT | RTC_TAMPER3_INTERRUPT | RTC_ALL_TAMPER_INTERRUPT))
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Private macros ------------------------------------------------------------*/
|
||
|
|
/** @defgroup RTCEx_Private_Macros RTCEx Private Macros
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define IS_RTC_OUTPUT(__OUTPUT__) (((__OUTPUT__) == RTC_OUTPUT_DISABLE) || \
|
||
|
|
((__OUTPUT__) == RTC_OUTPUT_ALARMA) || \
|
||
|
|
((__OUTPUT__) == RTC_OUTPUT_ALARMB) || \
|
||
|
|
((__OUTPUT__) == RTC_OUTPUT_WAKEUP))
|
||
|
|
#define IS_RTC_BKP(__BKP__) ((__BKP__) < (uint32_t) RTC_BKP_NUMBER)
|
||
|
|
#define IS_TIMESTAMP_EDGE(__EDGE__) (((__EDGE__) == RTC_TIMESTAMPEDGE_RISING) || \
|
||
|
|
((__EDGE__) == RTC_TIMESTAMPEDGE_FALLING))
|
||
|
|
#define IS_RTC_TAMPER(__TAMPER__) ((((__TAMPER__) & ((uint32_t)(0xFFFFFFFFU ^ RTC_TAMPCR_TAMPXE))) == 0x00U) && ((__TAMPER__) != (uint32_t)RESET))
|
||
|
|
|
||
|
|
#define IS_RTC_TAMPER_INTERRUPT(__INTERRUPT__) ((((__INTERRUPT__) & (uint32_t)(0xFFFFFFFFU ^ RTC_TAMPCR_TAMPXIE)) == 0x00U) && ((__INTERRUPT__) != (uint32_t)RESET))
|
||
|
|
|
||
|
|
#define IS_RTC_TIMESTAMP_PIN(__PIN__) (((__PIN__) == RTC_TIMESTAMPPIN_DEFAULT) || \
|
||
|
|
((__PIN__) == RTC_TIMESTAMPPIN_POS1) || \
|
||
|
|
((__PIN__) == RTC_TIMESTAMPPIN_POS2))
|
||
|
|
#define IS_RTC_TAMPER_TRIGGER(__TRIGGER__) (((__TRIGGER__) == RTC_TAMPERTRIGGER_RISINGEDGE) || \
|
||
|
|
((__TRIGGER__) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \
|
||
|
|
((__TRIGGER__) == RTC_TAMPERTRIGGER_LOWLEVEL) || \
|
||
|
|
((__TRIGGER__) == RTC_TAMPERTRIGGER_HIGHLEVEL))
|
||
|
|
#define IS_RTC_TAMPER_ERASE_MODE(__MODE__) (((__MODE__) == RTC_TAMPER_ERASE_BACKUP_ENABLE) || \
|
||
|
|
((__MODE__) == RTC_TAMPER_ERASE_BACKUP_DISABLE))
|
||
|
|
#define IS_RTC_TAMPER_MASKFLAG_STATE(__STATE__) (((__STATE__) == RTC_TAMPERMASK_FLAG_ENABLE) || \
|
||
|
|
((__STATE__) == RTC_TAMPERMASK_FLAG_DISABLE))
|
||
|
|
#define IS_RTC_TAMPER_FILTER(__FILTER__) (((__FILTER__) == RTC_TAMPERFILTER_DISABLE) || \
|
||
|
|
((__FILTER__) == RTC_TAMPERFILTER_2SAMPLE) || \
|
||
|
|
((__FILTER__) == RTC_TAMPERFILTER_4SAMPLE) || \
|
||
|
|
((__FILTER__) == RTC_TAMPERFILTER_8SAMPLE))
|
||
|
|
#define IS_RTC_TAMPER_SAMPLING_FREQ(__FREQ__) (((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \
|
||
|
|
((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \
|
||
|
|
((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \
|
||
|
|
((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \
|
||
|
|
((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \
|
||
|
|
((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \
|
||
|
|
((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512) || \
|
||
|
|
((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256))
|
||
|
|
#define IS_RTC_TAMPER_PRECHARGE_DURATION(__DURATION__) (((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \
|
||
|
|
((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \
|
||
|
|
((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \
|
||
|
|
((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK))
|
||
|
|
#define IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(__DETECTION__) (((__DETECTION__) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \
|
||
|
|
((__DETECTION__) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE))
|
||
|
|
#define IS_RTC_TAMPER_PULLUP_STATE(__STATE__) (((__STATE__) == RTC_TAMPER_PULLUP_ENABLE) || \
|
||
|
|
((__STATE__) == RTC_TAMPER_PULLUP_DISABLE))
|
||
|
|
#define IS_RTC_WAKEUP_CLOCK(__CLOCK__) (((__CLOCK__) == RTC_WAKEUPCLOCK_RTCCLK_DIV16) || \
|
||
|
|
((__CLOCK__) == RTC_WAKEUPCLOCK_RTCCLK_DIV8) || \
|
||
|
|
((__CLOCK__) == RTC_WAKEUPCLOCK_RTCCLK_DIV4) || \
|
||
|
|
((__CLOCK__) == RTC_WAKEUPCLOCK_RTCCLK_DIV2) || \
|
||
|
|
((__CLOCK__) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \
|
||
|
|
((__CLOCK__) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS))
|
||
|
|
|
||
|
|
#define IS_RTC_WAKEUP_COUNTER(__COUNTER__) ((__COUNTER__) <= 0xFFFF)
|
||
|
|
#define IS_RTC_SMOOTH_CALIB_PERIOD(__PERIOD__) (((__PERIOD__) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \
|
||
|
|
((__PERIOD__) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \
|
||
|
|
((__PERIOD__) == RTC_SMOOTHCALIB_PERIOD_8SEC))
|
||
|
|
#define IS_RTC_SMOOTH_CALIB_PLUS(__PLUS__) (((__PLUS__) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \
|
||
|
|
((__PLUS__) == RTC_SMOOTHCALIB_PLUSPULSES_RESET))
|
||
|
|
#define IS_RTC_SMOOTH_CALIB_MINUS(__VALUE__) ((__VALUE__) <= 0x000001FF)
|
||
|
|
#define IS_RTC_SHIFT_ADD1S(__SEL__) (((__SEL__) == RTC_SHIFTADD1S_RESET) || \
|
||
|
|
((__SEL__) == RTC_SHIFTADD1S_SET))
|
||
|
|
#define IS_RTC_SHIFT_SUBFS(__FS__) ((__FS__) <= 0x00007FFF)
|
||
|
|
#define IS_RTC_CALIB_OUTPUT(__OUTPUT__) (((__OUTPUT__) == RTC_CALIBOUTPUT_512HZ) || \
|
||
|
|
((__OUTPUT__) == RTC_CALIBOUTPUT_1HZ))
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
#ifdef __cplusplus
|
||
|
|
}
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#endif /* __STM32F7xx_HAL_RTC_EX_H */
|
||
|
|
|