1128 lines
32 KiB
C
1128 lines
32 KiB
C
/* USER CODE BEGIN Header */
|
|
/**
|
|
******************************************************************************
|
|
* @file : main.c
|
|
* @brief : Main program body
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
|
* All rights reserved.</center></h2>
|
|
*
|
|
* This software component is licensed by ST under Ultimate Liberty license
|
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
|
* the License. You may obtain a copy of the License at:
|
|
* www.st.com/SLA0044
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
/* USER CODE END Header */
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "main.h"
|
|
#include "cmsis_os.h"
|
|
#include "app_touchgfx.h"
|
|
|
|
/* Private includes ----------------------------------------------------------*/
|
|
/* USER CODE BEGIN Includes */
|
|
#include <stm32746g_discovery_qspi.h>
|
|
/* USER CODE END Includes */
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* USER CODE BEGIN PTD */
|
|
|
|
/* USER CODE END PTD */
|
|
|
|
/* Private define ------------------------------------------------------------*/
|
|
/* USER CODE BEGIN PD */
|
|
|
|
#define REFRESH_COUNT 1835
|
|
|
|
#define SDRAM_TIMEOUT ((uint32_t)0xFFFF)
|
|
#define SDRAM_MODEREG_BURST_LENGTH_1 ((uint16_t)0x0000)
|
|
#define SDRAM_MODEREG_BURST_LENGTH_2 ((uint16_t)0x0001)
|
|
#define SDRAM_MODEREG_BURST_LENGTH_4 ((uint16_t)0x0002)
|
|
#define SDRAM_MODEREG_BURST_LENGTH_8 ((uint16_t)0x0004)
|
|
#define SDRAM_MODEREG_BURST_TYPE_SEQUENTIAL ((uint16_t)0x0000)
|
|
#define SDRAM_MODEREG_BURST_TYPE_INTERLEAVED ((uint16_t)0x0008)
|
|
#define SDRAM_MODEREG_CAS_LATENCY_2 ((uint16_t)0x0020)
|
|
#define SDRAM_MODEREG_CAS_LATENCY_3 ((uint16_t)0x0030)
|
|
#define SDRAM_MODEREG_OPERATING_MODE_STANDARD ((uint16_t)0x0000)
|
|
#define SDRAM_MODEREG_WRITEBURST_MODE_PROGRAMMED ((uint16_t)0x0000)
|
|
#define SDRAM_MODEREG_WRITEBURST_MODE_SINGLE ((uint16_t)0x0200)
|
|
|
|
/* USER CODE END PD */
|
|
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/* USER CODE BEGIN PM */
|
|
|
|
/* USER CODE END PM */
|
|
|
|
/* Private variables ---------------------------------------------------------*/
|
|
ADC_HandleTypeDef hadc3;
|
|
|
|
CRC_HandleTypeDef hcrc;
|
|
|
|
DMA2D_HandleTypeDef hdma2d;
|
|
|
|
I2C_HandleTypeDef hi2c3;
|
|
|
|
LTDC_HandleTypeDef hltdc;
|
|
|
|
QSPI_HandleTypeDef hqspi;
|
|
|
|
RTC_HandleTypeDef hrtc;
|
|
|
|
TIM_HandleTypeDef htim1;
|
|
TIM_HandleTypeDef htim10;
|
|
|
|
UART_HandleTypeDef huart1;
|
|
|
|
SDRAM_HandleTypeDef hsdram1;
|
|
|
|
/* Definitions for TouchGFXTask */
|
|
osThreadId_t TouchGFXTaskHandle;
|
|
const osThreadAttr_t TouchGFXTask_attributes = {
|
|
.name = "TouchGFXTask",
|
|
.priority = (osPriority_t) osPriorityNormal,
|
|
.stack_size = 4096 * 4
|
|
};
|
|
/* USER CODE BEGIN PV */
|
|
static FMC_SDRAM_CommandTypeDef Command;
|
|
/* USER CODE END PV */
|
|
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
void SystemClock_Config(void);
|
|
static void MPU_Config(void);
|
|
static void MX_GPIO_Init(void);
|
|
static void MX_CRC_Init(void);
|
|
static void MX_DMA2D_Init(void);
|
|
static void MX_FMC_Init(void);
|
|
static void MX_I2C3_Init(void);
|
|
static void MX_LTDC_Init(void);
|
|
static void MX_QUADSPI_Init(void);
|
|
static void MX_ADC3_Init(void);
|
|
static void MX_RTC_Init(void);
|
|
static void MX_TIM1_Init(void);
|
|
static void MX_TIM10_Init(void);
|
|
static void MX_USART1_UART_Init(void);
|
|
void TouchGFX_Task(void *argument);
|
|
|
|
/* USER CODE BEGIN PFP */
|
|
|
|
/* USER CODE END PFP */
|
|
|
|
/* Private user code ---------------------------------------------------------*/
|
|
/* USER CODE BEGIN 0 */
|
|
|
|
/* USER CODE END 0 */
|
|
|
|
/**
|
|
* @brief The application entry point.
|
|
* @retval int
|
|
*/
|
|
int main(void)
|
|
{
|
|
/* USER CODE BEGIN 1 */
|
|
|
|
/* USER CODE END 1 */
|
|
|
|
/* MPU Configuration--------------------------------------------------------*/
|
|
MPU_Config();
|
|
|
|
/* Enable I-Cache---------------------------------------------------------*/
|
|
SCB_EnableICache();
|
|
|
|
/* Enable D-Cache---------------------------------------------------------*/
|
|
SCB_EnableDCache();
|
|
|
|
/* MCU Configuration--------------------------------------------------------*/
|
|
|
|
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
|
|
HAL_Init();
|
|
|
|
/* USER CODE BEGIN Init */
|
|
|
|
/* USER CODE END Init */
|
|
|
|
/* Configure the system clock */
|
|
SystemClock_Config();
|
|
|
|
/* USER CODE BEGIN SysInit */
|
|
|
|
/* USER CODE END SysInit */
|
|
|
|
/* Initialize all configured peripherals */
|
|
MX_GPIO_Init();
|
|
MX_CRC_Init();
|
|
MX_DMA2D_Init();
|
|
MX_FMC_Init();
|
|
MX_I2C3_Init();
|
|
MX_LTDC_Init();
|
|
MX_QUADSPI_Init();
|
|
MX_ADC3_Init();
|
|
MX_RTC_Init();
|
|
MX_TIM1_Init();
|
|
MX_TIM10_Init();
|
|
MX_USART1_UART_Init();
|
|
MX_TouchGFX_Init();
|
|
/* USER CODE BEGIN 2 */
|
|
|
|
/* USER CODE END 2 */
|
|
|
|
/* Init scheduler */
|
|
osKernelInitialize();
|
|
|
|
/* USER CODE BEGIN RTOS_MUTEX */
|
|
/* add mutexes, ... */
|
|
/* USER CODE END RTOS_MUTEX */
|
|
|
|
/* USER CODE BEGIN RTOS_SEMAPHORES */
|
|
/* add semaphores, ... */
|
|
/* USER CODE END RTOS_SEMAPHORES */
|
|
|
|
/* USER CODE BEGIN RTOS_TIMERS */
|
|
/* start timers, add new ones, ... */
|
|
/* USER CODE END RTOS_TIMERS */
|
|
|
|
/* USER CODE BEGIN RTOS_QUEUES */
|
|
/* add queues, ... */
|
|
/* USER CODE END RTOS_QUEUES */
|
|
|
|
/* Create the thread(s) */
|
|
/* creation of TouchGFXTask */
|
|
TouchGFXTaskHandle = osThreadNew(TouchGFX_Task, NULL, &TouchGFXTask_attributes);
|
|
|
|
/* USER CODE BEGIN RTOS_THREADS */
|
|
/* add threads, ... */
|
|
/* USER CODE END RTOS_THREADS */
|
|
|
|
/* USER CODE BEGIN RTOS_EVENTS */
|
|
/* add events, ... */
|
|
/* USER CODE END RTOS_EVENTS */
|
|
|
|
/* Start scheduler */
|
|
osKernelStart();
|
|
|
|
/* We should never get here as control is now taken by the scheduler */
|
|
/* Infinite loop */
|
|
/* USER CODE BEGIN WHILE */
|
|
while (1)
|
|
{
|
|
/* USER CODE END WHILE */
|
|
|
|
/* USER CODE BEGIN 3 */
|
|
}
|
|
/* USER CODE END 3 */
|
|
}
|
|
|
|
/**
|
|
* @brief System Clock Configuration
|
|
* @retval None
|
|
*/
|
|
void SystemClock_Config(void)
|
|
{
|
|
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
|
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
|
RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
|
|
|
|
/** Configure LSE Drive Capability
|
|
*/
|
|
HAL_PWR_EnableBkUpAccess();
|
|
/** Configure the main internal regulator output voltage
|
|
*/
|
|
__HAL_RCC_PWR_CLK_ENABLE();
|
|
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
|
/** Initializes the RCC Oscillators according to the specified parameters
|
|
* in the RCC_OscInitTypeDef structure.
|
|
*/
|
|
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI|RCC_OSCILLATORTYPE_HSE;
|
|
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
|
RCC_OscInitStruct.LSIState = RCC_LSI_ON;
|
|
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
|
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
|
RCC_OscInitStruct.PLL.PLLM = 25;
|
|
RCC_OscInitStruct.PLL.PLLN = 400;
|
|
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
|
|
RCC_OscInitStruct.PLL.PLLQ = 2;
|
|
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
/** Activate the Over-Drive mode
|
|
*/
|
|
if (HAL_PWREx_EnableOverDrive() != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
/** Initializes the CPU, AHB and APB buses clocks
|
|
*/
|
|
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|
|
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
|
|
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
|
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
|
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
|
|
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
|
|
|
|
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_6) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_LTDC|RCC_PERIPHCLK_RTC
|
|
|RCC_PERIPHCLK_USART1|RCC_PERIPHCLK_I2C3;
|
|
PeriphClkInitStruct.PLLSAI.PLLSAIN = 384;
|
|
PeriphClkInitStruct.PLLSAI.PLLSAIR = 5;
|
|
PeriphClkInitStruct.PLLSAI.PLLSAIQ = 2;
|
|
PeriphClkInitStruct.PLLSAI.PLLSAIP = RCC_PLLSAIP_DIV2;
|
|
PeriphClkInitStruct.PLLSAIDivQ = 1;
|
|
PeriphClkInitStruct.PLLSAIDivR = RCC_PLLSAIDIVR_8;
|
|
PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSI;
|
|
PeriphClkInitStruct.Usart1ClockSelection = RCC_USART1CLKSOURCE_PCLK2;
|
|
PeriphClkInitStruct.I2c3ClockSelection = RCC_I2C3CLKSOURCE_PCLK1;
|
|
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief ADC3 Initialization Function
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void MX_ADC3_Init(void)
|
|
{
|
|
|
|
/* USER CODE BEGIN ADC3_Init 0 */
|
|
|
|
/* USER CODE END ADC3_Init 0 */
|
|
|
|
ADC_ChannelConfTypeDef sConfig = {0};
|
|
|
|
/* USER CODE BEGIN ADC3_Init 1 */
|
|
|
|
/* USER CODE END ADC3_Init 1 */
|
|
/** Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion)
|
|
*/
|
|
hadc3.Instance = ADC3;
|
|
hadc3.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4;
|
|
hadc3.Init.Resolution = ADC_RESOLUTION_12B;
|
|
hadc3.Init.ScanConvMode = ADC_SCAN_DISABLE;
|
|
hadc3.Init.ContinuousConvMode = DISABLE;
|
|
hadc3.Init.DiscontinuousConvMode = DISABLE;
|
|
hadc3.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_RISING;
|
|
hadc3.Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T1_CC1;
|
|
hadc3.Init.DataAlign = ADC_DATAALIGN_RIGHT;
|
|
hadc3.Init.NbrOfConversion = 1;
|
|
hadc3.Init.DMAContinuousRequests = DISABLE;
|
|
hadc3.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
|
|
if (HAL_ADC_Init(&hadc3) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
/** Configure for the selected ADC regular channel its corresponding rank in the sequencer and its sample time.
|
|
*/
|
|
sConfig.Channel = ADC_CHANNEL_0;
|
|
sConfig.Rank = ADC_REGULAR_RANK_1;
|
|
sConfig.SamplingTime = ADC_SAMPLETIME_3CYCLES;
|
|
if (HAL_ADC_ConfigChannel(&hadc3, &sConfig) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
/* USER CODE BEGIN ADC3_Init 2 */
|
|
|
|
/* USER CODE END ADC3_Init 2 */
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief CRC Initialization Function
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void MX_CRC_Init(void)
|
|
{
|
|
|
|
/* USER CODE BEGIN CRC_Init 0 */
|
|
|
|
/* USER CODE END CRC_Init 0 */
|
|
|
|
/* USER CODE BEGIN CRC_Init 1 */
|
|
|
|
/* USER CODE END CRC_Init 1 */
|
|
hcrc.Instance = CRC;
|
|
hcrc.Init.DefaultPolynomialUse = DEFAULT_POLYNOMIAL_ENABLE;
|
|
hcrc.Init.DefaultInitValueUse = DEFAULT_INIT_VALUE_ENABLE;
|
|
hcrc.Init.InputDataInversionMode = CRC_INPUTDATA_INVERSION_NONE;
|
|
hcrc.Init.OutputDataInversionMode = CRC_OUTPUTDATA_INVERSION_DISABLE;
|
|
hcrc.InputDataFormat = CRC_INPUTDATA_FORMAT_BYTES;
|
|
if (HAL_CRC_Init(&hcrc) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
/* USER CODE BEGIN CRC_Init 2 */
|
|
|
|
/* USER CODE END CRC_Init 2 */
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief DMA2D Initialization Function
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void MX_DMA2D_Init(void)
|
|
{
|
|
|
|
/* USER CODE BEGIN DMA2D_Init 0 */
|
|
|
|
/* USER CODE END DMA2D_Init 0 */
|
|
|
|
/* USER CODE BEGIN DMA2D_Init 1 */
|
|
|
|
/* USER CODE END DMA2D_Init 1 */
|
|
hdma2d.Instance = DMA2D;
|
|
hdma2d.Init.Mode = DMA2D_M2M;
|
|
hdma2d.Init.ColorMode = DMA2D_OUTPUT_ARGB8888;
|
|
hdma2d.Init.OutputOffset = 0;
|
|
hdma2d.LayerCfg[1].InputOffset = 0;
|
|
hdma2d.LayerCfg[1].InputColorMode = DMA2D_INPUT_ARGB8888;
|
|
hdma2d.LayerCfg[1].AlphaMode = DMA2D_NO_MODIF_ALPHA;
|
|
hdma2d.LayerCfg[1].InputAlpha = 0;
|
|
if (HAL_DMA2D_Init(&hdma2d) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
if (HAL_DMA2D_ConfigLayer(&hdma2d, 1) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
/* USER CODE BEGIN DMA2D_Init 2 */
|
|
|
|
/* USER CODE END DMA2D_Init 2 */
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief I2C3 Initialization Function
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void MX_I2C3_Init(void)
|
|
{
|
|
|
|
/* USER CODE BEGIN I2C3_Init 0 */
|
|
|
|
/* USER CODE END I2C3_Init 0 */
|
|
|
|
/* USER CODE BEGIN I2C3_Init 1 */
|
|
|
|
/* USER CODE END I2C3_Init 1 */
|
|
hi2c3.Instance = I2C3;
|
|
hi2c3.Init.Timing = 0x00C0EAFF;
|
|
hi2c3.Init.OwnAddress1 = 0;
|
|
hi2c3.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
|
|
hi2c3.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE;
|
|
hi2c3.Init.OwnAddress2 = 0;
|
|
hi2c3.Init.OwnAddress2Masks = I2C_OA2_NOMASK;
|
|
hi2c3.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE;
|
|
hi2c3.Init.NoStretchMode = I2C_NOSTRETCH_DISABLE;
|
|
if (HAL_I2C_Init(&hi2c3) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
/** Configure Analogue filter
|
|
*/
|
|
if (HAL_I2CEx_ConfigAnalogFilter(&hi2c3, I2C_ANALOGFILTER_ENABLE) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
/** Configure Digital filter
|
|
*/
|
|
if (HAL_I2CEx_ConfigDigitalFilter(&hi2c3, 0) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
/* USER CODE BEGIN I2C3_Init 2 */
|
|
|
|
/* USER CODE END I2C3_Init 2 */
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief LTDC Initialization Function
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void MX_LTDC_Init(void)
|
|
{
|
|
|
|
/* USER CODE BEGIN LTDC_Init 0 */
|
|
|
|
/* USER CODE END LTDC_Init 0 */
|
|
|
|
LTDC_LayerCfgTypeDef pLayerCfg = {0};
|
|
|
|
/* USER CODE BEGIN LTDC_Init 1 */
|
|
|
|
/* USER CODE END LTDC_Init 1 */
|
|
hltdc.Instance = LTDC;
|
|
hltdc.Init.HSPolarity = LTDC_HSPOLARITY_AL;
|
|
hltdc.Init.VSPolarity = LTDC_VSPOLARITY_AL;
|
|
hltdc.Init.DEPolarity = LTDC_DEPOLARITY_AL;
|
|
hltdc.Init.PCPolarity = LTDC_PCPOLARITY_IPC;
|
|
hltdc.Init.HorizontalSync = 40;
|
|
hltdc.Init.VerticalSync = 9;
|
|
hltdc.Init.AccumulatedHBP = 53;
|
|
hltdc.Init.AccumulatedVBP = 11;
|
|
hltdc.Init.AccumulatedActiveW = 533;
|
|
hltdc.Init.AccumulatedActiveH = 283;
|
|
hltdc.Init.TotalWidth = 565;
|
|
hltdc.Init.TotalHeigh = 285;
|
|
hltdc.Init.Backcolor.Blue = 0;
|
|
hltdc.Init.Backcolor.Green = 0;
|
|
hltdc.Init.Backcolor.Red = 0;
|
|
if (HAL_LTDC_Init(&hltdc) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
pLayerCfg.WindowX0 = 0;
|
|
pLayerCfg.WindowX1 = 480;
|
|
pLayerCfg.WindowY0 = 0;
|
|
pLayerCfg.WindowY1 = 272;
|
|
pLayerCfg.PixelFormat = LTDC_PIXEL_FORMAT_RGB565;
|
|
pLayerCfg.Alpha = 255;
|
|
pLayerCfg.Alpha0 = 0;
|
|
pLayerCfg.BlendingFactor1 = LTDC_BLENDING_FACTOR1_CA;
|
|
pLayerCfg.BlendingFactor2 = LTDC_BLENDING_FACTOR2_CA;
|
|
pLayerCfg.FBStartAdress = 0xC0000000;
|
|
pLayerCfg.ImageWidth = 480;
|
|
pLayerCfg.ImageHeight = 272;
|
|
pLayerCfg.Backcolor.Blue = 0;
|
|
pLayerCfg.Backcolor.Green = 0;
|
|
pLayerCfg.Backcolor.Red = 0;
|
|
if (HAL_LTDC_ConfigLayer(&hltdc, &pLayerCfg, 0) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
/* USER CODE BEGIN LTDC_Init 2 */
|
|
|
|
/* USER CODE END LTDC_Init 2 */
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief QUADSPI Initialization Function
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void MX_QUADSPI_Init(void)
|
|
{
|
|
|
|
/* USER CODE BEGIN QUADSPI_Init 0 */
|
|
|
|
/* USER CODE END QUADSPI_Init 0 */
|
|
|
|
/* USER CODE BEGIN QUADSPI_Init 1 */
|
|
|
|
/* USER CODE END QUADSPI_Init 1 */
|
|
/* QUADSPI parameter configuration*/
|
|
hqspi.Instance = QUADSPI;
|
|
hqspi.Init.ClockPrescaler = 1;
|
|
hqspi.Init.FifoThreshold = 4;
|
|
hqspi.Init.SampleShifting = QSPI_SAMPLE_SHIFTING_HALFCYCLE;
|
|
hqspi.Init.FlashSize = 24;
|
|
hqspi.Init.ChipSelectHighTime = QSPI_CS_HIGH_TIME_6_CYCLE;
|
|
hqspi.Init.ClockMode = QSPI_CLOCK_MODE_0;
|
|
hqspi.Init.FlashID = QSPI_FLASH_ID_1;
|
|
hqspi.Init.DualFlash = QSPI_DUALFLASH_DISABLE;
|
|
if (HAL_QSPI_Init(&hqspi) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
/* USER CODE BEGIN QUADSPI_Init 2 */
|
|
BSP_QSPI_Init();
|
|
|
|
BSP_QSPI_MemoryMappedMode();
|
|
HAL_NVIC_DisableIRQ(QUADSPI_IRQn);
|
|
/* USER CODE END QUADSPI_Init 2 */
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief RTC Initialization Function
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void MX_RTC_Init(void)
|
|
{
|
|
|
|
/* USER CODE BEGIN RTC_Init 0 */
|
|
|
|
/* USER CODE END RTC_Init 0 */
|
|
|
|
RTC_TimeTypeDef sTime = {0};
|
|
RTC_DateTypeDef sDate = {0};
|
|
RTC_AlarmTypeDef sAlarm = {0};
|
|
|
|
/* USER CODE BEGIN RTC_Init 1 */
|
|
|
|
/* USER CODE END RTC_Init 1 */
|
|
/** Initialize RTC Only
|
|
*/
|
|
hrtc.Instance = RTC;
|
|
hrtc.Init.HourFormat = RTC_HOURFORMAT_24;
|
|
hrtc.Init.AsynchPrediv = 127;
|
|
hrtc.Init.SynchPrediv = 255;
|
|
hrtc.Init.OutPut = RTC_OUTPUT_DISABLE;
|
|
hrtc.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
|
|
hrtc.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
|
|
if (HAL_RTC_Init(&hrtc) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
|
|
/* USER CODE BEGIN Check_RTC_BKUP */
|
|
|
|
/* USER CODE END Check_RTC_BKUP */
|
|
|
|
/** Initialize RTC and set the Time and Date
|
|
*/
|
|
sTime.Hours = 0x0;
|
|
sTime.Minutes = 0x0;
|
|
sTime.Seconds = 0x0;
|
|
sTime.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
|
|
sTime.StoreOperation = RTC_STOREOPERATION_RESET;
|
|
if (HAL_RTC_SetTime(&hrtc, &sTime, RTC_FORMAT_BCD) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
sDate.WeekDay = RTC_WEEKDAY_MONDAY;
|
|
sDate.Month = RTC_MONTH_JANUARY;
|
|
sDate.Date = 0x1;
|
|
sDate.Year = 0x0;
|
|
if (HAL_RTC_SetDate(&hrtc, &sDate, RTC_FORMAT_BCD) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
/** Enable the Alarm A
|
|
*/
|
|
sAlarm.AlarmTime.Hours = 0x0;
|
|
sAlarm.AlarmTime.Minutes = 0x0;
|
|
sAlarm.AlarmTime.Seconds = 0x0;
|
|
sAlarm.AlarmTime.SubSeconds = 0x0;
|
|
sAlarm.AlarmTime.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
|
|
sAlarm.AlarmTime.StoreOperation = RTC_STOREOPERATION_RESET;
|
|
sAlarm.AlarmMask = RTC_ALARMMASK_NONE;
|
|
sAlarm.AlarmSubSecondMask = RTC_ALARMSUBSECONDMASK_ALL;
|
|
sAlarm.AlarmDateWeekDaySel = RTC_ALARMDATEWEEKDAYSEL_DATE;
|
|
sAlarm.AlarmDateWeekDay = 0x1;
|
|
sAlarm.Alarm = RTC_ALARM_A;
|
|
if (HAL_RTC_SetAlarm(&hrtc, &sAlarm, RTC_FORMAT_BCD) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
/** Enable the Alarm B
|
|
*/
|
|
sAlarm.Alarm = RTC_ALARM_B;
|
|
if (HAL_RTC_SetAlarm(&hrtc, &sAlarm, RTC_FORMAT_BCD) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
/** Enable the TimeStamp
|
|
*/
|
|
if (HAL_RTCEx_SetTimeStamp(&hrtc, RTC_TIMESTAMPEDGE_RISING, RTC_TIMESTAMPPIN_POS1) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
/* USER CODE BEGIN RTC_Init 2 */
|
|
|
|
/* USER CODE END RTC_Init 2 */
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief TIM1 Initialization Function
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void MX_TIM1_Init(void)
|
|
{
|
|
|
|
/* USER CODE BEGIN TIM1_Init 0 */
|
|
|
|
/* USER CODE END TIM1_Init 0 */
|
|
|
|
TIM_SlaveConfigTypeDef sSlaveConfig = {0};
|
|
TIM_MasterConfigTypeDef sMasterConfig = {0};
|
|
TIM_OC_InitTypeDef sConfigOC = {0};
|
|
TIM_BreakDeadTimeConfigTypeDef sBreakDeadTimeConfig = {0};
|
|
|
|
/* USER CODE BEGIN TIM1_Init 1 */
|
|
|
|
/* USER CODE END TIM1_Init 1 */
|
|
htim1.Instance = TIM1;
|
|
htim1.Init.Prescaler = 168;
|
|
htim1.Init.CounterMode = TIM_COUNTERMODE_UP;
|
|
htim1.Init.Period = ADC_SAMPLE_PERIOD_IN_US - 1;
|
|
htim1.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
|
|
htim1.Init.RepetitionCounter = 0;
|
|
htim1.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
|
|
if (HAL_TIM_Base_Init(&htim1) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
if (HAL_TIM_OC_Init(&htim1) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
sSlaveConfig.SlaveMode = TIM_SLAVEMODE_DISABLE;
|
|
sSlaveConfig.InputTrigger = TIM_TS_ITR0;
|
|
if (HAL_TIM_SlaveConfigSynchro(&htim1, &sSlaveConfig) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
|
|
sMasterConfig.MasterOutputTrigger2 = TIM_TRGO2_RESET;
|
|
sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
|
|
if (HAL_TIMEx_MasterConfigSynchronization(&htim1, &sMasterConfig) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
sConfigOC.OCMode = TIM_OCMODE_TOGGLE;
|
|
sConfigOC.Pulse = 0;
|
|
sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
|
|
sConfigOC.OCNPolarity = TIM_OCNPOLARITY_HIGH;
|
|
sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
|
|
sConfigOC.OCIdleState = TIM_OCIDLESTATE_RESET;
|
|
sConfigOC.OCNIdleState = TIM_OCNIDLESTATE_RESET;
|
|
if (HAL_TIM_OC_ConfigChannel(&htim1, &sConfigOC, TIM_CHANNEL_1) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
sBreakDeadTimeConfig.OffStateRunMode = TIM_OSSR_DISABLE;
|
|
sBreakDeadTimeConfig.OffStateIDLEMode = TIM_OSSI_DISABLE;
|
|
sBreakDeadTimeConfig.LockLevel = TIM_LOCKLEVEL_OFF;
|
|
sBreakDeadTimeConfig.DeadTime = 0;
|
|
sBreakDeadTimeConfig.BreakState = TIM_BREAK_DISABLE;
|
|
sBreakDeadTimeConfig.BreakPolarity = TIM_BREAKPOLARITY_HIGH;
|
|
sBreakDeadTimeConfig.BreakFilter = 0;
|
|
sBreakDeadTimeConfig.Break2State = TIM_BREAK2_DISABLE;
|
|
sBreakDeadTimeConfig.Break2Polarity = TIM_BREAK2POLARITY_HIGH;
|
|
sBreakDeadTimeConfig.Break2Filter = 0;
|
|
sBreakDeadTimeConfig.AutomaticOutput = TIM_AUTOMATICOUTPUT_DISABLE;
|
|
if (HAL_TIMEx_ConfigBreakDeadTime(&htim1, &sBreakDeadTimeConfig) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
/* USER CODE BEGIN TIM1_Init 2 */
|
|
|
|
/* USER CODE END TIM1_Init 2 */
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief TIM10 Initialization Function
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void MX_TIM10_Init(void)
|
|
{
|
|
|
|
/* USER CODE BEGIN TIM10_Init 0 */
|
|
|
|
/* USER CODE END TIM10_Init 0 */
|
|
|
|
TIM_OC_InitTypeDef sConfigOC = {0};
|
|
|
|
/* USER CODE BEGIN TIM10_Init 1 */
|
|
|
|
/* USER CODE END TIM10_Init 1 */
|
|
htim10.Instance = TIM10;
|
|
htim10.Init.Prescaler = 168;
|
|
htim10.Init.CounterMode = TIM_COUNTERMODE_UP;
|
|
htim10.Init.Period = 20000;
|
|
htim10.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
|
|
htim10.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
|
|
if (HAL_TIM_Base_Init(&htim10) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
if (HAL_TIM_PWM_Init(&htim10) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
sConfigOC.OCMode = TIM_OCMODE_PWM1;
|
|
sConfigOC.Pulse = 10000;
|
|
sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
|
|
sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
|
|
if (HAL_TIM_PWM_ConfigChannel(&htim10, &sConfigOC, TIM_CHANNEL_1) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
/* USER CODE BEGIN TIM10_Init 2 */
|
|
|
|
/* USER CODE END TIM10_Init 2 */
|
|
HAL_TIM_MspPostInit(&htim10);
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief USART1 Initialization Function
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void MX_USART1_UART_Init(void)
|
|
{
|
|
|
|
/* USER CODE BEGIN USART1_Init 0 */
|
|
|
|
/* USER CODE END USART1_Init 0 */
|
|
|
|
/* USER CODE BEGIN USART1_Init 1 */
|
|
|
|
/* USER CODE END USART1_Init 1 */
|
|
huart1.Instance = USART1;
|
|
huart1.Init.BaudRate = 115200;
|
|
huart1.Init.WordLength = UART_WORDLENGTH_8B;
|
|
huart1.Init.StopBits = UART_STOPBITS_1;
|
|
huart1.Init.Parity = UART_PARITY_NONE;
|
|
huart1.Init.Mode = UART_MODE_TX_RX;
|
|
huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
|
huart1.Init.OverSampling = UART_OVERSAMPLING_16;
|
|
huart1.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
|
|
huart1.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
|
|
if (HAL_UART_Init(&huart1) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
/* USER CODE BEGIN USART1_Init 2 */
|
|
|
|
/* USER CODE END USART1_Init 2 */
|
|
|
|
}
|
|
|
|
/* FMC initialization function */
|
|
static void MX_FMC_Init(void)
|
|
{
|
|
|
|
/* USER CODE BEGIN FMC_Init 0 */
|
|
|
|
/* USER CODE END FMC_Init 0 */
|
|
|
|
FMC_SDRAM_TimingTypeDef SdramTiming = {0};
|
|
|
|
/* USER CODE BEGIN FMC_Init 1 */
|
|
|
|
/* USER CODE END FMC_Init 1 */
|
|
|
|
/** Perform the SDRAM1 memory initialization sequence
|
|
*/
|
|
hsdram1.Instance = FMC_SDRAM_DEVICE;
|
|
/* hsdram1.Init */
|
|
hsdram1.Init.SDBank = FMC_SDRAM_BANK1;
|
|
hsdram1.Init.ColumnBitsNumber = FMC_SDRAM_COLUMN_BITS_NUM_8;
|
|
hsdram1.Init.RowBitsNumber = FMC_SDRAM_ROW_BITS_NUM_12;
|
|
hsdram1.Init.MemoryDataWidth = FMC_SDRAM_MEM_BUS_WIDTH_16;
|
|
hsdram1.Init.InternalBankNumber = FMC_SDRAM_INTERN_BANKS_NUM_4;
|
|
hsdram1.Init.CASLatency = FMC_SDRAM_CAS_LATENCY_3;
|
|
hsdram1.Init.WriteProtection = FMC_SDRAM_WRITE_PROTECTION_DISABLE;
|
|
hsdram1.Init.SDClockPeriod = FMC_SDRAM_CLOCK_PERIOD_2;
|
|
hsdram1.Init.ReadBurst = FMC_SDRAM_RBURST_ENABLE;
|
|
hsdram1.Init.ReadPipeDelay = FMC_SDRAM_RPIPE_DELAY_0;
|
|
/* SdramTiming */
|
|
SdramTiming.LoadToActiveDelay = 2;
|
|
SdramTiming.ExitSelfRefreshDelay = 7;
|
|
SdramTiming.SelfRefreshTime = 4;
|
|
SdramTiming.RowCycleDelay = 7;
|
|
SdramTiming.WriteRecoveryTime = 3;
|
|
SdramTiming.RPDelay = 2;
|
|
SdramTiming.RCDDelay = 2;
|
|
|
|
if (HAL_SDRAM_Init(&hsdram1, &SdramTiming) != HAL_OK)
|
|
{
|
|
Error_Handler( );
|
|
}
|
|
|
|
/* USER CODE BEGIN FMC_Init 2 */
|
|
__IO uint32_t tmpmrd = 0;
|
|
|
|
/* Step 1: Configure a clock configuration enable command */
|
|
Command.CommandMode = FMC_SDRAM_CMD_CLK_ENABLE;
|
|
Command.CommandTarget = FMC_SDRAM_CMD_TARGET_BANK1;
|
|
Command.AutoRefreshNumber = 1;
|
|
Command.ModeRegisterDefinition = 0;
|
|
|
|
/* Send the command */
|
|
HAL_SDRAM_SendCommand(&hsdram1, &Command, SDRAM_TIMEOUT);
|
|
|
|
/* Step 2: Insert 100 us minimum delay */
|
|
/* Inserted delay is equal to 1 ms due to systick time base unit (ms) */
|
|
HAL_Delay(1);
|
|
|
|
/* Step 3: Configure a PALL (precharge all) command */
|
|
Command.CommandMode = FMC_SDRAM_CMD_PALL;
|
|
Command.CommandTarget = FMC_SDRAM_CMD_TARGET_BANK1;
|
|
Command.AutoRefreshNumber = 1;
|
|
Command.ModeRegisterDefinition = 0;
|
|
|
|
/* Send the command */
|
|
HAL_SDRAM_SendCommand(&hsdram1, &Command, SDRAM_TIMEOUT);
|
|
|
|
/* Step 4: Configure an Auto Refresh command */
|
|
Command.CommandMode = FMC_SDRAM_CMD_AUTOREFRESH_MODE;
|
|
Command.CommandTarget = FMC_SDRAM_CMD_TARGET_BANK1;
|
|
Command.AutoRefreshNumber = 8;
|
|
Command.ModeRegisterDefinition = 0;
|
|
|
|
/* Send the command */
|
|
HAL_SDRAM_SendCommand(&hsdram1, &Command, SDRAM_TIMEOUT);
|
|
|
|
/* Step 5: Program the external memory mode register */
|
|
tmpmrd = (uint32_t)SDRAM_MODEREG_BURST_LENGTH_1 | \
|
|
SDRAM_MODEREG_BURST_TYPE_SEQUENTIAL | \
|
|
SDRAM_MODEREG_CAS_LATENCY_3 | \
|
|
SDRAM_MODEREG_OPERATING_MODE_STANDARD | \
|
|
SDRAM_MODEREG_WRITEBURST_MODE_SINGLE;
|
|
|
|
Command.CommandMode = FMC_SDRAM_CMD_LOAD_MODE;
|
|
Command.CommandTarget = FMC_SDRAM_CMD_TARGET_BANK1;
|
|
Command.AutoRefreshNumber = 1;
|
|
Command.ModeRegisterDefinition = tmpmrd;
|
|
|
|
/* Send the command */
|
|
HAL_SDRAM_SendCommand(&hsdram1, &Command, SDRAM_TIMEOUT);
|
|
|
|
/* Step 6: Set the refresh rate counter */
|
|
/* Set the device refresh rate */
|
|
HAL_SDRAM_ProgramRefreshRate(&hsdram1, REFRESH_COUNT);
|
|
|
|
//Deactivate speculative/cache access to first FMC Bank to save FMC bandwidth
|
|
FMC_Bank1->BTCR[0] = 0x000030D2;
|
|
/* USER CODE END FMC_Init 2 */
|
|
}
|
|
|
|
/**
|
|
* @brief GPIO Initialization Function
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void MX_GPIO_Init(void)
|
|
{
|
|
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
|
|
|
/* GPIO Ports Clock Enable */
|
|
__HAL_RCC_GPIOE_CLK_ENABLE();
|
|
__HAL_RCC_GPIOB_CLK_ENABLE();
|
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
|
__HAL_RCC_GPIOG_CLK_ENABLE();
|
|
__HAL_RCC_GPIOJ_CLK_ENABLE();
|
|
__HAL_RCC_GPIOD_CLK_ENABLE();
|
|
__HAL_RCC_GPIOI_CLK_ENABLE();
|
|
__HAL_RCC_GPIOK_CLK_ENABLE();
|
|
__HAL_RCC_GPIOC_CLK_ENABLE();
|
|
__HAL_RCC_GPIOF_CLK_ENABLE();
|
|
__HAL_RCC_GPIOH_CLK_ENABLE();
|
|
|
|
/*Configure GPIO pin Output Level */
|
|
HAL_GPIO_WritePin(GPIOB, GPIO_PIN_4, GPIO_PIN_RESET);
|
|
|
|
/*Configure GPIO pin Output Level */
|
|
HAL_GPIO_WritePin(LED0_GPIO_Port, LED0_Pin, GPIO_PIN_RESET);
|
|
|
|
/*Configure GPIO pin Output Level */
|
|
HAL_GPIO_WritePin(GPIOD, GPIO_PIN_5, GPIO_PIN_RESET);
|
|
|
|
/*Configure GPIO pin Output Level */
|
|
HAL_GPIO_WritePin(LCD_BL_CTRL_GPIO_Port, LCD_BL_CTRL_Pin, GPIO_PIN_SET);
|
|
|
|
/*Configure GPIO pin Output Level */
|
|
HAL_GPIO_WritePin(LCD_DISP_GPIO_Port, LCD_DISP_Pin, GPIO_PIN_SET);
|
|
|
|
/*Configure GPIO pin Output Level */
|
|
HAL_GPIO_WritePin(GPIOH, GPIO_PIN_13, GPIO_PIN_RESET);
|
|
|
|
/*Configure GPIO pin : PE3 */
|
|
GPIO_InitStruct.Pin = GPIO_PIN_3;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
|
|
|
|
/*Configure GPIO pin : PB4 */
|
|
GPIO_InitStruct.Pin = GPIO_PIN_4;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
|
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
|
|
|
/*Configure GPIO pin : LED0_Pin */
|
|
GPIO_InitStruct.Pin = LED0_Pin;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
|
HAL_GPIO_Init(LED0_GPIO_Port, &GPIO_InitStruct);
|
|
|
|
/*Configure GPIO pin : PJ12 */
|
|
GPIO_InitStruct.Pin = GPIO_PIN_12;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
HAL_GPIO_Init(GPIOJ, &GPIO_InitStruct);
|
|
|
|
/*Configure GPIO pin : PD5 */
|
|
GPIO_InitStruct.Pin = GPIO_PIN_5;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
|
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
|
|
|
|
/*Configure GPIO pins : BUTTON1_Pin BUTTON0_Pin */
|
|
GPIO_InitStruct.Pin = BUTTON1_Pin|BUTTON0_Pin;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
HAL_GPIO_Init(GPIOI, &GPIO_InitStruct);
|
|
|
|
/*Configure GPIO pin : PC13 */
|
|
GPIO_InitStruct.Pin = GPIO_PIN_13;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
|
|
|
/*Configure GPIO pin : LCD_BL_CTRL_Pin */
|
|
GPIO_InitStruct.Pin = LCD_BL_CTRL_Pin;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
|
HAL_GPIO_Init(LCD_BL_CTRL_GPIO_Port, &GPIO_InitStruct);
|
|
|
|
/*Configure GPIO pin : PD4 */
|
|
GPIO_InitStruct.Pin = GPIO_PIN_4;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
|
|
|
|
/*Configure GPIO pin : PH15 */
|
|
GPIO_InitStruct.Pin = GPIO_PIN_15;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
HAL_GPIO_Init(GPIOH, &GPIO_InitStruct);
|
|
|
|
/*Configure GPIO pin : PI1 */
|
|
GPIO_InitStruct.Pin = GPIO_PIN_1;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
|
|
HAL_GPIO_Init(GPIOI, &GPIO_InitStruct);
|
|
|
|
/*Configure GPIO pin : LCD_DISP_Pin */
|
|
GPIO_InitStruct.Pin = LCD_DISP_Pin;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
|
HAL_GPIO_Init(LCD_DISP_GPIO_Port, &GPIO_InitStruct);
|
|
|
|
/*Configure GPIO pin : PH13 */
|
|
GPIO_InitStruct.Pin = GPIO_PIN_13;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
|
HAL_GPIO_Init(GPIOH, &GPIO_InitStruct);
|
|
|
|
}
|
|
|
|
/* USER CODE BEGIN 4 */
|
|
|
|
/* USER CODE END 4 */
|
|
|
|
/* USER CODE BEGIN Header_TouchGFX_Task */
|
|
/**
|
|
* @brief Function implementing the TouchGFXTask thread.
|
|
* @param argument: Not used
|
|
* @retval None
|
|
*/
|
|
/* USER CODE END Header_TouchGFX_Task */
|
|
__weak void TouchGFX_Task(void *argument)
|
|
{
|
|
/* USER CODE BEGIN 5 */
|
|
MX_TouchGFX_Process();
|
|
/* Infinite loop */
|
|
for(;;)
|
|
{
|
|
osDelay(1);
|
|
}
|
|
/* USER CODE END 5 */
|
|
}
|
|
|
|
/* MPU Configuration */
|
|
|
|
void MPU_Config(void)
|
|
{
|
|
MPU_Region_InitTypeDef MPU_InitStruct = {0};
|
|
|
|
/* Disables the MPU */
|
|
HAL_MPU_Disable();
|
|
/** Initializes and configures the Region and the memory to be protected
|
|
*/
|
|
MPU_InitStruct.Enable = MPU_REGION_ENABLE;
|
|
MPU_InitStruct.Number = MPU_REGION_NUMBER0;
|
|
MPU_InitStruct.BaseAddress = 0x90000000;
|
|
MPU_InitStruct.Size = MPU_REGION_SIZE_256MB;
|
|
MPU_InitStruct.SubRegionDisable = 0x0;
|
|
MPU_InitStruct.TypeExtField = MPU_TEX_LEVEL0;
|
|
MPU_InitStruct.AccessPermission = MPU_REGION_FULL_ACCESS;
|
|
MPU_InitStruct.DisableExec = MPU_INSTRUCTION_ACCESS_ENABLE;
|
|
MPU_InitStruct.IsShareable = MPU_ACCESS_NOT_SHAREABLE;
|
|
MPU_InitStruct.IsCacheable = MPU_ACCESS_NOT_CACHEABLE;
|
|
MPU_InitStruct.IsBufferable = MPU_ACCESS_NOT_BUFFERABLE;
|
|
|
|
HAL_MPU_ConfigRegion(&MPU_InitStruct);
|
|
/** Initializes and configures the Region and the memory to be protected
|
|
*/
|
|
MPU_InitStruct.Enable = MPU_REGION_ENABLE;
|
|
MPU_InitStruct.Number = MPU_REGION_NUMBER1;
|
|
MPU_InitStruct.BaseAddress = 0x90000000;
|
|
MPU_InitStruct.Size = MPU_REGION_SIZE_16MB;
|
|
MPU_InitStruct.SubRegionDisable = 0x0;
|
|
MPU_InitStruct.TypeExtField = MPU_TEX_LEVEL0;
|
|
MPU_InitStruct.AccessPermission = MPU_REGION_FULL_ACCESS;
|
|
MPU_InitStruct.DisableExec = MPU_INSTRUCTION_ACCESS_ENABLE;
|
|
MPU_InitStruct.IsShareable = MPU_ACCESS_NOT_SHAREABLE;
|
|
MPU_InitStruct.IsCacheable = MPU_ACCESS_CACHEABLE;
|
|
MPU_InitStruct.IsBufferable = MPU_ACCESS_NOT_BUFFERABLE;
|
|
|
|
HAL_MPU_ConfigRegion(&MPU_InitStruct);
|
|
/* Enables the MPU */
|
|
HAL_MPU_Enable(MPU_PRIVILEGED_DEFAULT);
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief This function is executed in case of error occurrence.
|
|
* @retval None
|
|
*/
|
|
void Error_Handler(void)
|
|
{
|
|
/* USER CODE BEGIN Error_Handler_Debug */
|
|
/* User can add his own implementation to report the HAL error return state */
|
|
|
|
/* USER CODE END Error_Handler_Debug */
|
|
}
|
|
|
|
#ifdef USE_FULL_ASSERT
|
|
/**
|
|
* @brief Reports the name of the source file and the source line number
|
|
* where the assert_param error has occurred.
|
|
* @param file: pointer to the source file name
|
|
* @param line: assert_param error line source number
|
|
* @retval None
|
|
*/
|
|
void assert_failed(uint8_t *file, uint32_t line)
|
|
{
|
|
/* USER CODE BEGIN 6 */
|
|
/* User can add his own implementation to report the file name and line number,
|
|
tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
|
/* USER CODE END 6 */
|
|
}
|
|
#endif /* USE_FULL_ASSERT */
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|