355 lines
22 KiB
C
355 lines
22 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32f7xx_hal_adc.h
|
|
* @author MCD Application Team
|
|
* @brief Header file of ADC HAL module.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* Copyright (c) 2017 STMicroelectronics.
|
|
* All rights reserved.
|
|
*
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
|
* in the root directory of this software component.
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef STM32F7xx_ADC_EX_H
|
|
#define STM32F7xx_ADC_EX_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f7xx_hal_def.h"
|
|
|
|
/** @addtogroup STM32F7xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup ADCEx
|
|
* @{
|
|
*/
|
|
|
|
/* Exported types ------------------------------------------------------------*/
|
|
/** @defgroup ADCEx_Exported_Types ADC Exported Types
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief ADC Configuration injected Channel structure definition
|
|
* @note Parameters of this structure are shared within 2 scopes:
|
|
* - Scope channel: InjectedChannel, InjectedRank, InjectedSamplingTime, InjectedOffset
|
|
* - Scope injected group (affects all channels of injected group): InjectedNbrOfConversion, InjectedDiscontinuousConvMode,
|
|
* AutoInjectedConv, ExternalTrigInjecConvEdge, ExternalTrigInjecConv.
|
|
* @note The setting of these parameters with function HAL_ADCEx_InjectedConfigChannel() is conditioned to ADC state.
|
|
* ADC state can be either:
|
|
* - For all parameters: ADC disabled
|
|
* - For all except parameters 'InjectedDiscontinuousConvMode' and 'AutoInjectedConv': ADC enabled without conversion on going on injected group.
|
|
* - For parameters 'ExternalTrigInjecConv' and 'ExternalTrigInjecConvEdge': ADC enabled, even with conversion on going on injected group.
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t InjectedChannel; /*!< Selection of ADC channel to configure
|
|
This parameter can be a value of @ref ADC_channels
|
|
Note: Depending on devices, some channels may not be available on package pins. Refer to device datasheet for channels availability. */
|
|
uint32_t InjectedRank; /*!< Rank in the injected group sequencer
|
|
This parameter must be a value of @ref ADCEx_injected_rank
|
|
Note: In case of need to disable a channel or change order of conversion sequencer, rank containing a previous channel setting can be overwritten by the new channel setting (or parameter number of conversions can be adjusted) */
|
|
uint32_t InjectedSamplingTime; /*!< Sampling time value to be set for the selected channel.
|
|
Unit: ADC clock cycles
|
|
Conversion time is the addition of sampling time and processing time (12 ADC clock cycles at ADC resolution 12 bits, 11 cycles at 10 bits, 9 cycles at 8 bits, 7 cycles at 6 bits).
|
|
This parameter can be a value of @ref ADC_sampling_times
|
|
Caution: This parameter updates the parameter property of the channel, that can be used into regular and/or injected groups.
|
|
If this same channel has been previously configured in the other group (regular/injected), it will be updated to last setting.
|
|
Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor),
|
|
sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting)
|
|
Refer to device datasheet for timings values, parameters TS_vrefint, TS_temp (values rough order: 4us min). */
|
|
uint32_t InjectedOffset; /*!< Defines the offset to be subtracted from the raw converted data (for channels set on injected group only).
|
|
Offset value must be a positive number.
|
|
Depending of ADC resolution selected (12, 10, 8 or 6 bits),
|
|
this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. */
|
|
uint32_t InjectedNbrOfConversion; /*!< Specifies the number of ranks that will be converted within the injected group sequencer.
|
|
To use the injected group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled.
|
|
This parameter must be a number between Min_Data = 1 and Max_Data = 4.
|
|
Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
|
|
configure a channel on injected group can impact the configuration of other channels previously set. */
|
|
FunctionalState InjectedDiscontinuousConvMode; /*!< Specifies whether the conversions sequence of injected group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts).
|
|
Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded.
|
|
Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded.
|
|
This parameter can be set to ENABLE or DISABLE.
|
|
Note: For injected group, number of discontinuous ranks increment is fixed to one-by-one.
|
|
Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
|
|
configure a channel on injected group can impact the configuration of other channels previously set. */
|
|
FunctionalState AutoInjectedConv; /*!< Enables or disables the selected ADC automatic injected group conversion after regular one
|
|
This parameter can be set to ENABLE or DISABLE.
|
|
Note: To use Automatic injected conversion, discontinuous mode must be disabled ('DiscontinuousConvMode' and 'InjectedDiscontinuousConvMode' set to DISABLE)
|
|
Note: To use Automatic injected conversion, injected group external triggers must be disabled ('ExternalTrigInjecConv' set to ADC_SOFTWARE_START)
|
|
Note: In case of DMA used with regular group: if DMA configured in normal mode (single shot) JAUTO will be stopped upon DMA transfer complete.
|
|
To maintain JAUTO always enabled, DMA must be configured in circular mode.
|
|
Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
|
|
configure a channel on injected group can impact the configuration of other channels previously set. */
|
|
uint32_t ExternalTrigInjecConv; /*!< Selects the external event used to trigger the conversion start of injected group.
|
|
If set to ADC_INJECTED_SOFTWARE_START, external triggers are disabled.
|
|
If set to external trigger source, triggering is on event rising edge.
|
|
This parameter can be a value of @ref ADCEx_External_trigger_Source_Injected
|
|
Note: This parameter must be modified when ADC is disabled (before ADC start conversion or after ADC stop conversion).
|
|
If ADC is enabled, this parameter setting is bypassed without error reporting (as it can be the expected behaviour in case of another parameter update on the fly)
|
|
Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
|
|
configure a channel on injected group can impact the configuration of other channels previously set. */
|
|
uint32_t ExternalTrigInjecConvEdge; /*!< Selects the external trigger edge of injected group.
|
|
This parameter can be a value of @ref ADCEx_External_trigger_edge_Injected.
|
|
If trigger is set to ADC_INJECTED_SOFTWARE_START, this parameter is discarded.
|
|
Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
|
|
configure a channel on injected group can impact the configuration of other channels previously set. */
|
|
}ADC_InjectionConfTypeDef;
|
|
|
|
/**
|
|
* @brief ADC Configuration multi-mode structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t Mode; /*!< Configures the ADC to operate in independent or multi mode.
|
|
This parameter can be a value of @ref ADCEx_Common_mode */
|
|
uint32_t DMAAccessMode; /*!< Configures the Direct memory access mode for multi ADC mode.
|
|
This parameter can be a value of @ref ADCEx_Direct_memory_access_mode_for_multi_mode */
|
|
uint32_t TwoSamplingDelay; /*!< Configures the Delay between 2 sampling phases.
|
|
This parameter can be a value of @ref ADC_delay_between_2_sampling_phases */
|
|
}ADC_MultiModeTypeDef;
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported constants --------------------------------------------------------*/
|
|
/** @defgroup ADCEx_Exported_Constants ADC Exported Constants
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup ADCEx_Common_mode ADC Common Mode
|
|
* @{
|
|
*/
|
|
#define ADC_MODE_INDEPENDENT ((uint32_t)0x00000000U)
|
|
#define ADC_DUALMODE_REGSIMULT_INJECSIMULT ((uint32_t)ADC_CCR_MULTI_0)
|
|
#define ADC_DUALMODE_REGSIMULT_ALTERTRIG ((uint32_t)ADC_CCR_MULTI_1)
|
|
#define ADC_DUALMODE_INJECSIMULT ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_0))
|
|
#define ADC_DUALMODE_REGSIMULT ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1))
|
|
#define ADC_DUALMODE_INTERL ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1 | ADC_CCR_MULTI_0))
|
|
#define ADC_DUALMODE_ALTERTRIG ((uint32_t)(ADC_CCR_MULTI_3 | ADC_CCR_MULTI_0))
|
|
#define ADC_TRIPLEMODE_REGSIMULT_INJECSIMULT ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_0))
|
|
#define ADC_TRIPLEMODE_REGSIMULT_AlterTrig ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_1))
|
|
#define ADC_TRIPLEMODE_INJECSIMULT ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_0))
|
|
#define ADC_TRIPLEMODE_REGSIMULT ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1))
|
|
#define ADC_TRIPLEMODE_INTERL ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1 | ADC_CCR_MULTI_0))
|
|
#define ADC_TRIPLEMODE_ALTERTRIG ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_3 | ADC_CCR_MULTI_0))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup ADCEx_Direct_memory_access_mode_for_multi_mode ADC Direct Memory Access Mode For Multi Mode
|
|
* @{
|
|
*/
|
|
#define ADC_DMAACCESSMODE_DISABLED ((uint32_t)0x00000000U) /*!< DMA mode disabled */
|
|
#define ADC_DMAACCESSMODE_1 ((uint32_t)ADC_CCR_DMA_0) /*!< DMA mode 1 enabled (2 / 3 half-words one by one - 1 then 2 then 3)*/
|
|
#define ADC_DMAACCESSMODE_2 ((uint32_t)ADC_CCR_DMA_1) /*!< DMA mode 2 enabled (2 / 3 half-words by pairs - 2&1 then 1&3 then 3&2)*/
|
|
#define ADC_DMAACCESSMODE_3 ((uint32_t)ADC_CCR_DMA) /*!< DMA mode 3 enabled (2 / 3 bytes by pairs - 2&1 then 1&3 then 3&2) */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup ADCEx_External_trigger_edge_Injected ADC External Trigger Edge Injected
|
|
* @{
|
|
*/
|
|
#define ADC_EXTERNALTRIGINJECCONVEDGE_NONE ((uint32_t)0x00000000U)
|
|
#define ADC_EXTERNALTRIGINJECCONVEDGE_RISING ((uint32_t)ADC_CR2_JEXTEN_0)
|
|
#define ADC_EXTERNALTRIGINJECCONVEDGE_FALLING ((uint32_t)ADC_CR2_JEXTEN_1)
|
|
#define ADC_EXTERNALTRIGINJECCONVEDGE_RISINGFALLING ((uint32_t)ADC_CR2_JEXTEN)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup ADCEx_External_trigger_Source_Injected ADC External Trigger Source Injected
|
|
* @{
|
|
*/
|
|
#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO ((uint32_t)0x00000000U)
|
|
#define ADC_EXTERNALTRIGINJECCONV_T1_CC4 ((uint32_t)ADC_CR2_JEXTSEL_0)
|
|
#define ADC_EXTERNALTRIGINJECCONV_T2_TRGO ((uint32_t)ADC_CR2_JEXTSEL_1)
|
|
#define ADC_EXTERNALTRIGINJECCONV_T2_CC1 ((uint32_t)(ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
|
|
#define ADC_EXTERNALTRIGINJECCONV_T3_CC4 ((uint32_t)ADC_CR2_JEXTSEL_2)
|
|
#define ADC_EXTERNALTRIGINJECCONV_T4_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0))
|
|
|
|
#define ADC_EXTERNALTRIGINJECCONV_T8_CC4 ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
|
|
#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO2 ((uint32_t)ADC_CR2_JEXTSEL_3)
|
|
#define ADC_EXTERNALTRIGINJECCONV_T8_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_0))
|
|
#define ADC_EXTERNALTRIGINJECCONV_T8_TRGO2 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_1))
|
|
#define ADC_EXTERNALTRIGINJECCONV_T3_CC3 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
|
|
#define ADC_EXTERNALTRIGINJECCONV_T5_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2))
|
|
#define ADC_EXTERNALTRIGINJECCONV_T3_CC1 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0))
|
|
#define ADC_EXTERNALTRIGINJECCONV_T6_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1))
|
|
#define ADC_INJECTED_SOFTWARE_START ((uint32_t)ADC_CR2_JEXTSEL + 1)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup ADCEx_injected_rank ADC Injected Channel Rank
|
|
* @{
|
|
*/
|
|
#define ADC_INJECTED_RANK_1 ((uint32_t)0x00000001U)
|
|
#define ADC_INJECTED_RANK_2 ((uint32_t)0x00000002U)
|
|
#define ADC_INJECTED_RANK_3 ((uint32_t)0x00000003U)
|
|
#define ADC_INJECTED_RANK_4 ((uint32_t)0x00000004U)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup ADCEx_channels ADC Specific Channels
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported macro ------------------------------------------------------------*/
|
|
/** @defgroup ADC_Exported_Macros ADC Exported Macros
|
|
* @{
|
|
*/
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
/** @addtogroup ADCEx_Exported_Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup ADCEx_Exported_Functions_Group1
|
|
* @{
|
|
*/
|
|
|
|
/* I/O operation functions ******************************************************/
|
|
HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef* hadc);
|
|
HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef* hadc);
|
|
HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout);
|
|
HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef* hadc);
|
|
HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef* hadc);
|
|
uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef* hadc, uint32_t InjectedRank);
|
|
HAL_StatusTypeDef HAL_ADCEx_MultiModeStart_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length);
|
|
HAL_StatusTypeDef HAL_ADCEx_MultiModeStop_DMA(ADC_HandleTypeDef* hadc);
|
|
uint32_t HAL_ADCEx_MultiModeGetValue(ADC_HandleTypeDef* hadc);
|
|
void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef* hadc);
|
|
|
|
/* Peripheral Control functions *************************************************/
|
|
HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc,ADC_InjectionConfTypeDef* sConfigInjected);
|
|
HAL_StatusTypeDef HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef* hadc, ADC_MultiModeTypeDef* multimode);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
/* Private types -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* Private constants ---------------------------------------------------------*/
|
|
/** @defgroup ADCEx_Private_Constants ADC Private Constants
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private macros ------------------------------------------------------------*/
|
|
/** @defgroup ADCEx_Private_Macros ADC Private Macros
|
|
* @{
|
|
*/
|
|
|
|
#define IS_ADC_MODE(__MODE__) (((__MODE__) == ADC_MODE_INDEPENDENT) || \
|
|
((__MODE__) == ADC_DUALMODE_REGSIMULT_INJECSIMULT) || \
|
|
((__MODE__) == ADC_DUALMODE_REGSIMULT_ALTERTRIG) || \
|
|
((__MODE__) == ADC_DUALMODE_INJECSIMULT) || \
|
|
((__MODE__) == ADC_DUALMODE_REGSIMULT) || \
|
|
((__MODE__) == ADC_DUALMODE_INTERL) || \
|
|
((__MODE__) == ADC_DUALMODE_ALTERTRIG) || \
|
|
((__MODE__) == ADC_TRIPLEMODE_REGSIMULT_INJECSIMULT) || \
|
|
((__MODE__) == ADC_TRIPLEMODE_REGSIMULT_AlterTrig) || \
|
|
((__MODE__) == ADC_TRIPLEMODE_INJECSIMULT) || \
|
|
((__MODE__) == ADC_TRIPLEMODE_REGSIMULT) || \
|
|
((__MODE__) == ADC_TRIPLEMODE_INTERL) || \
|
|
((__MODE__) == ADC_TRIPLEMODE_ALTERTRIG))
|
|
#define IS_ADC_DMA_ACCESS_MODE(__MODE__) (((__MODE__) == ADC_DMAACCESSMODE_DISABLED) || \
|
|
((__MODE__) == ADC_DMAACCESSMODE_1) || \
|
|
((__MODE__) == ADC_DMAACCESSMODE_2) || \
|
|
((__MODE__) == ADC_DMAACCESSMODE_3))
|
|
#define IS_ADC_EXT_INJEC_TRIG_EDGE(__EDGE__) (((__EDGE__) == ADC_EXTERNALTRIGINJECCONVEDGE_NONE) || \
|
|
((__EDGE__) == ADC_EXTERNALTRIGINJECCONVEDGE_RISING) || \
|
|
((__EDGE__) == ADC_EXTERNALTRIGINJECCONVEDGE_FALLING) || \
|
|
((__EDGE__) == ADC_EXTERNALTRIGINJECCONVEDGE_RISINGFALLING))
|
|
#define IS_ADC_EXT_INJEC_TRIG(__INJTRIG__) (((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \
|
|
((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T1_CC4) || \
|
|
((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \
|
|
((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \
|
|
((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \
|
|
((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \
|
|
((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T8_CC4) || \
|
|
((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO2) || \
|
|
((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T8_TRGO) || \
|
|
((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T8_TRGO2) || \
|
|
((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T3_CC3) || \
|
|
((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T5_TRGO) || \
|
|
((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T3_CC1) || \
|
|
((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T6_TRGO) || \
|
|
((__INJTRIG__) == ADC_INJECTED_SOFTWARE_START))
|
|
#define IS_ADC_INJECTED_RANK(__RANK__) (((__RANK__) == ADC_INJECTED_RANK_1) || \
|
|
((__RANK__) == ADC_INJECTED_RANK_2) || \
|
|
((__RANK__) == ADC_INJECTED_RANK_3) || \
|
|
((__RANK__) == ADC_INJECTED_RANK_4))
|
|
#define IS_ADC_INJECTED_LENGTH(__LENGTH__) (((__LENGTH__) >= ((uint32_t)1)) && ((__LENGTH__) <= ((uint32_t)4)))
|
|
|
|
/**
|
|
* @brief Set the selected injected Channel rank.
|
|
* @param _CHANNELNB_ Channel number.
|
|
* @param _RANKNB_ Rank number.
|
|
* @param _JSQR_JL_ Sequence length.
|
|
* @retval None
|
|
*/
|
|
#define ADC_JSQR(_CHANNELNB_, _RANKNB_,_JSQR_JL_) (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5 * (uint8_t)(((_RANKNB_) + 3) - (_JSQR_JL_))))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private functions ---------------------------------------------------------*/
|
|
/** @defgroup ADCEx_Private_Functions ADC Private Functions
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* STM32F7xx_ADC_EX_H */
|
|
|
|
|