1
0
SEm-Labos/06-07-08-09-SystemOnChip/Board/concat/systemOnChip.lpf

335 lines
11 KiB
Plaintext
Raw Permalink Normal View History

2024-02-23 13:01:05 +00:00
### For reference, see TN1262 / FPGA-TN-02032
# .lpf file format is not really documented by Lattice, normally generated through Diamond
################
#### sysCONFIG
################
# The BLOCK commands disable tracing of paths within clock domains (impacting overall timing score)
# It can also be used on paths if the TRACE should not consider the clock domain crossing
# like : BLOCK PATH FROM CLKNET "CLK_A" TO CLKNET "CLK_B" ;
BLOCK RESETPATHS ;
BLOCK ASYNCPATHS ;
BLOCK JTAGPATHS ;
BLOCK RD_DURING_WR_PATHS ;
# Not comprehensive
# dflt : CONFIG_IOVOLTAGE 1.2, 1.5, 1.8, 2.5(dflt), 3.3 voltage is 3.3V
# dflt : COMPRESS_CONFIG OFF (dflt), ON no bitstream compression
# mod : MCCLK_FREQ 2.4, 4.8, 9.7, 19.4, 38.8, 62 NOR program read @ 62MHz
# mod : MASTER_SPI_PORT DISABLE (dflt), ENABLE master SPI port stays SPI and not GPIOs, other mods disabled by dflt
# dflt : BACKGROUND_RECONFIG - no soft ERC when hot-loading bitstream (due to cosmic rays)
# dflt : DONE_PULL ON (dflt), OFF IPU on DONE pin
# dflt : DONE_EX OFF (dflt), ON not delaying end of the configuration (used for daisy chaining FPGAs)
# mod : DONE_OD OFF (dflt), ON DONE pin as open-drain instead of push-pull
# dflt : CONFIG_SECURE OFF (dflt), ON allows external access to current program
# mod : CONFIG_MODE JTAG (dflt), SSPI, SPI_SERIAL, SPI_DUAL, SPI_QUAD, SLAVE_PARALLEL, SLAVE_SERIAL
# which bus and mode is used to load configuration (for the Lattic IDE)
# dflt : TRANSFR OFF (dflt), ON if using TransFR tool from Lattice
# dflt : WAKE_UP 4 (set DONE=1 before starting user code, dflt for DONE_EX=ON)
# 21 (set DONE=1 once FPGA is already running user code, dflt for DONE_EX=OFF)
# mod : INBUF ON, OFF disable unused input buffers (not sure it impacts the ECP5 family)
SYSCONFIG MCCLK_FREQ=62 MASTER_SPI_PORT=ENABLE DONE_OD=ON CONFIG_MODE=SPI_QUAD INBUF=OFF CONFIG_IOVOLTAGE=3.3 ;
IOBUF ALLPORTS IO_TYPE=LVCMOS33 ;
################
#### Labs DB
################
### Clock and reset ###
#INPUT_SETUP ALLPORTS 50.000000 ns HOLD 10.000000 ns CLKPORT "CLK" ;
#INPUT_SETUP PORT "nRST" 50.000000 ns CLKPORT "CLK" ;
FREQUENCY PORT "clock" 100.000000 MHz ;
LOCATE COMP "clock" SITE "K16" ;
IOBUF PORT "clock" PULLMODE=NONE ;
LOCATE COMP "reset_n" SITE "E13" ;
GSR_NET NET "resetSynch_n";
### LEDs ###
LOCATE COMP "LED1" SITE "T14" ;# red
LOCATE COMP "LED2" SITE "R14" ;# green
LOCATE COMP "LED3" SITE "T15" ;# blue
################
#### SODIMM-200
################
### PP2 ###
LOCATE COMP "xOut" SITE "G3" ;
LOCATE COMP "yOut" SITE "E1" ;
LOCATE COMP "ampOut" SITE "F3" ;
#LOCATE COMP "" SITE "D1" ;
#LOCATE COMP "" SITE "F4" ;
#LOCATE COMP "" SITE "C1" ;
LOCATE COMP "morseIn" SITE "D7" ;
#LOCATE COMP "" SITE "B6" ;
LOCATE COMP "morseEnvelope" SITE "C7" ;
#LOCATE COMP "" SITE "A6" ; # PP2 11
#LOCATE COMP "" SITE "D8" ; # PP2 13
#LOCATE COMP "" SITE "B7" ; # PP2 15
#LOCATE COMP "" SITE "C8" ; # PP2 17
#LOCATE COMP "" SITE "A7" ; # PP2 19
#LOCATE COMP "" SITE "E9" ; # PP2 21
LOCATE COMP "RxD_synch" SITE "A8" ; # PP2 23
LOCATE COMP "morseOut" SITE "D9" ; # PP2 25
### PP1 ###
#LOCATE COMP "" SITE "A9" ;
#LOCATE COMP "" SITE "D10" ;
#LOCATE COMP "" SITE "A10" ;
#LOCATE COMP "" SITE "C10" ;
#LOCATE COMP "" SITE "B10" ;
#LOCATE COMP "" SITE "C12" ;
#LOCATE COMP "" SITE "B12" ;
#LOCATE COMP "" SITE "D13" ;
#LOCATE COMP "" SITE "A13" ;
#LOCATE COMP "" SITE "M5" ; # PP1 11
#LOCATE COMP "" SITE "L5" ; # PP1 13
#LOCATE COMP "" SITE "K5" ; # PP1 15
#LOCATE COMP "" SITE "H5" ; # PP1 17
#LOCATE COMP "" SITE "E8" ; # PP1 19
#LOCATE COMP "" SITE "E5" ; # PP1 21
LOCATE COMP "selSinCos_n" SITE "E6" ; # PP1 23
#LOCATE COMP "" SITE "E7" ; # PP1 25
### USB (FTDI2232HL located on the daughterboard) ###
LOCATE COMP "TxD" SITE "A14" ;
IOBUF PORT "TxD" SLEWRATE=FAST ;
LOCATE COMP "RxD" SITE "B14" ;
IOBUF PORT "RxD" PULLMODE=UP ;
#LOCATE COMP "USB_DB_RTS" SITE "B13" ;
#IOBUF PORT "USB_DB_RTS" SLEWRATE=FAST ;
#LOCATE COMP "USB_DB_CTS" SITE "C13" ;
#IOBUF PORT "USB_DB_CTS" PULLMODE=UP ;
################
#### Extras
################
### SD Flash (External SD card) ###
#LOCATE COMP "SD_DETECT" SITE "G12" ;
#IOBUF PORT "SD_DETECT" PULLMODE=UP ;
#LOCATE COMP "SD_CMD" SITE "C15" ;
#IOBUF PORT "SD_CMD" SLEWRATE=FAST ;
#LOCATE COMP "SD_CLK" SITE "B15" ;
#IOBUF PORT "SD_CLK" SLEWRATE=FAST ;
#LOCATE COMP "SD_DTA[0]" SITE "B16" ;
##IOBUF PORT "SD_DTA[0]" SLEWRATE=FAST ;
#LOCATE COMP "SD_DTA[1]" SITE "C16" ;
##IOBUF PORT "SD_DTA[1]" SLEWRATE=FAST ;
#LOCATE COMP "SD_DTA[2]" SITE "F12" ;
##IOBUF PORT "SD_DTA[2]" SLEWRATE=FAST ;
#LOCATE COMP "SD_DTA[3]" SITE "C14" ;
##IOBUF PORT "SD_DTA[3]" SLEWRATE=FAST ;
### DRAM ###
#LOCATE COMP "DRAM_ADDR[0]" SITE "J15" ;
#IOBUF PORT "DRAM_ADDR[0]" SLEWRATE=FAST ;
#LOCATE COMP "DRAM_ADDR[1]" SITE "L16" ;
#IOBUF PORT "DRAM_ADDR[1]" SLEWRATE=FAST ;
#LOCATE COMP "DRAM_ADDR[2]" SITE "L15" ;
#IOBUF PORT "DRAM_ADDR[2]" SLEWRATE=FAST ;
#LOCATE COMP "DRAM_ADDR[3]" SITE "K15" ;
#IOBUF PORT "DRAM_ADDR[3]" SLEWRATE=FAST ;
#LOCATE COMP "DRAM_ADDR[4]" SITE "G15" ;
#IOBUF PORT "DRAM_ADDR[4]" SLEWRATE=FAST ;
#LOCATE COMP "DRAM_ADDR[5]" SITE "F15" ;
#IOBUF PORT "DRAM_ADDR[5]" SLEWRATE=FAST ;
#LOCATE COMP "DRAM_ADDR[6]" SITE "F16" ;
#IOBUF PORT "DRAM_ADDR[6]" SLEWRATE=FAST ;
#LOCATE COMP "DRAM_ADDR[7]" SITE "E16" ;
#IOBUF PORT "DRAM_ADDR[7]" SLEWRATE=FAST ;
#LOCATE COMP "DRAM_ADDR[8]" SITE "E15" ;
#IOBUF PORT "DRAM_ADDR[8]" SLEWRATE=FAST ;
#LOCATE COMP "DRAM_ADDR[9]" SITE "G13" ;
#IOBUF PORT "DRAM_ADDR[9]" SLEWRATE=FAST ;
#LOCATE COMP "DRAM_ADDR[10]" SITE "M16" ;
#IOBUF PORT "DRAM_ADDR[10]" SLEWRATE=FAST ;
#LOCATE COMP "DRAM_ADDR[11]" SITE "F13" ;
#IOBUF PORT "DRAM_ADDR[11]" SLEWRATE=FAST ;
#LOCATE COMP "DRAM_ADDR[12]" SITE "D16" ;
#IOBUF PORT "DRAM_ADDR[12]" SLEWRATE=FAST ;
#LOCATE COMP "DRAM_BA[0]" SITE "L14" ;
#IOBUF PORT "DRAM_BA[0]" SLEWRATE=FAST ;
#LOCATE COMP "DRAM_BA[1]" SITE "L13" ;
#IOBUF PORT "DRAM_BA[1]" SLEWRATE=FAST ;
#LOCATE COMP "DRAM_CLK" SITE "G14" ;
#IOBUF PORT "DRAM_CLK" SLEWRATE=FAST ;
#LOCATE COMP "DRAM_CKE" SITE "G16" ;
#IOBUF PORT "DRAM_CKE" SLEWRATE=FAST ;
#LOCATE COMP "DRAM_nRAS" SITE "M14" ;
#IOBUF PORT "DRAM_nRAS" SLEWRATE=FAST ;
#LOCATE COMP "DRAM_nCAS" SITE "K13" ;
#IOBUF PORT "DRAM_nCAS" SLEWRATE=FAST ;
#LOCATE COMP "DRAM_nWE" SITE "N16" ;
#IOBUF PORT "DRAM_nWE" SLEWRATE=FAST ;
#LOCATE COMP "DRAM_nCS" SITE "M15" ;
#LOCATE COMP "DRAM_DQ[0]" SITE "P14" ;
#LOCATE COMP "DRAM_DQ[1]" SITE "R15" ;
#LOCATE COMP "DRAM_DQ[2]" SITE "N14" ;
#LOCATE COMP "DRAM_DQ[3]" SITE "R16" ;
#LOCATE COMP "DRAM_DQ[4]" SITE "J14" ;
#LOCATE COMP "DRAM_DQ[5]" SITE "P15" ;
#LOCATE COMP "DRAM_DQ[6]" SITE "K14" ;
#LOCATE COMP "DRAM_DQ[7]" SITE "P16" ;
#LOCATE COMP "DRAM_DQ[8]" SITE "D14" ;
#LOCATE COMP "DRAM_DQ[9]" SITE "H14" ;
#LOCATE COMP "DRAM_DQ[10]" SITE "H12" ;
#LOCATE COMP "DRAM_DQ[11]" SITE "H13" ;
#LOCATE COMP "DRAM_DQ[12]" SITE "E14" ;
#LOCATE COMP "DRAM_DQ[13]" SITE "H15" ;
#LOCATE COMP "DRAM_DQ[14]" SITE "J13" ;
#LOCATE COMP "DRAM_DQ[15]" SITE "J16" ;
#LOCATE COMP "DRAM_DQM[0]" SITE "M13" ;
#IOBUF PORT "DRAM_DQM[0]" SLEWRATE=FAST ;
#LOCATE COMP "DRAM_DQM[1]" SITE "F14" ;
#IOBUF PORT "DRAM_DQM[1]" SLEWRATE=FAST ;
### USB (chip located on the motherboard) ###
#LOCATE COMP "USB_MB_TX" SITE "M11" ;
#IOBUF PORT "USB_MB_TX" SLEWRATE=FAST ;
#LOCATE COMP "USB_MB_RX" SITE "N12" ;
#IOBUF PORT "USB_MB_RX" PULLMODE=UP ;
#LOCATE COMP "USB_MB_RTS" SITE "N11" ;
#IOBUF PORT "USB_MB_RTS" SLEWRATE=FAST ;
#LOCATE COMP "USB_MB_CTS" SITE "M12" ;
#IOBUF PORT "USB_MB_CTS" PULLMODE=UP ;
### PMOD1 ###
#LOCATE COMP "dbg_leds[16]" SITE "P1" ;
#LOCATE COMP "dbg_leds[17]" SITE "N4" ;
#LOCATE COMP "dbg_leds[18]" SITE "P2" ;
#LOCATE COMP "dbg_leds[19]" SITE "P5" ;
#LOCATE COMP "dbg_leds[20]" SITE "R1" ;
#LOCATE COMP "dbg_leds[21]" SITE "N5" ;
#LOCATE COMP "dbg_leds[22]" SITE "R2" ;
#LOCATE COMP "dbg_leds[23]" SITE "N6" ;
### PMOD2 ###
#LOCATE COMP "dbg_leds[24]" SITE "R3" ;
#LOCATE COMP "dbg_leds[25]" SITE "P11" ;
#LOCATE COMP "dbg_leds[26]" SITE "P12" ;
#LOCATE COMP "dbg_leds[27]" SITE "T3" ;
#LOCATE COMP "dbg_leds[28]" SITE "R4" ;
#LOCATE COMP "dbg_leds[29]" SITE "R12" ;
#LOCATE COMP "dbg_leds[30]" SITE "T13" ;
#LOCATE COMP "dbg_leds[31]" SITE "R5" ;
### PMOD3 ###
#LOCATE COMP "dbg_leds[8]" SITE "B2" ;
#LOCATE COMP "dbg_leds[9]" SITE "B3" ;
#LOCATE COMP "dbg_leds[10]" SITE "A4" ;
#LOCATE COMP "dbg_leds[11]" SITE "D4" ;
#LOCATE COMP "dbg_leds[12]" SITE "A2" ;
#LOCATE COMP "dbg_leds[13]" SITE "B4" ;
#LOCATE COMP "dbg_leds[14]" SITE "C3" ;
#LOCATE COMP "dbg_leds[15]" SITE "C4" ;
### PMOD4 ###
#LOCATE COMP "dbg_leds[0]" SITE "J4" ;
#LOCATE COMP "dbg_leds[1]" SITE "J5" ;
#LOCATE COMP "dbg_leds[2]" SITE "H4" ;
#LOCATE COMP "dbg_leds[3]" SITE "E4" ;
#LOCATE COMP "dbg_leds[4]" SITE "J3" ;
#LOCATE COMP "dbg_leds[5]" SITE "H3" ;
#LOCATE COMP "dbg_leds[6]" SITE "E3" ;
#LOCATE COMP "dbg_leds[7]" SITE "D3" ;
### Ethernet ###
#LOCATE COMP "ETH_CLK_EN" SITE "B1" ;
#LOCATE COMP "ETH_nRESET" SITE "C2" ;
#LOCATE COMP "ETH_nLED_Y" SITE "F1" ;
#LOCATE COMP "ETH_nLED_G" SITE "G2" ;
#LOCATE COMP "ETH_MDC" SITE "J1" ;
#LOCATE COMP "ETH_MDIO" SITE "H2" ;
#IOBUF PORT "ETH_MDIO" OPENDRAIN=ON SLEWRATE=FAST ;
#LOCATE COMP "ETH_MDINT" SITE "G1" ;
#IOBUF PORT "ETH_MDINT" SLEWRATE=FAST ;
#LOCATE COMP "ETH_REF_CLK" SITE "P3" ;
#LOCATE COMP "ETH_TX_CLK" SITE "M4" ;
#IOBUF PORT "ETH_TX_CLK" SLEWRATE=FAST ;
#LOCATE COMP "ETH_TX_CTL" SITE "N3" ;
#IOBUF PORT "ETH_TX_CTL" SLEWRATE=FAST ;
#LOCATE COMP "ETH_TXD[0]" SITE "M3" ;
#IOBUF PORT "ETH_TXD[0]" SLEWRATE=FAST ;
#LOCATE COMP "ETH_TXD[1]" SITE "L4" ;
#IOBUF PORT "ETH_TXD[1]" SLEWRATE=FAST ;
#LOCATE COMP "ETH_TXD[2]" SITE "K4" ;
#IOBUF PORT "ETH_TXD[2]" SLEWRATE=FAST ;
#LOCATE COMP "ETH_TXD[3]" SITE "K3" ;
#IOBUF PORT "ETH_TXD[3]" SLEWRATE=FAST ;
#LOCATE COMP "ETH_RX_CLK" SITE "K1" ;
#LOCATE COMP "ETH_RX_CTL" SITE "K2" ;
#LOCATE COMP "ETH_RXD[0]" SITE "L1" ;
#LOCATE COMP "ETH_RXD[1]" SITE "L2" ;
#LOCATE COMP "ETH_RXD[2]" SITE "M1" ;
#LOCATE COMP "ETH_RXD[3]" SITE "M2" ;
### Extras ###
#LOCATE COMP "EXT[1]" SITE "P13" ;
#LOCATE COMP "EXT[2]" SITE "R13" ;
#LOCATE COMP "EXT[3]" SITE "A3" ;
#LOCATE COMP "EXT[4]" SITE "A5" ;
#LOCATE COMP "EXT[5]" SITE "B5" ;
#LOCATE COMP "EXT[6]" SITE "C5" ;
#LOCATE COMP "EXT[7]" SITE "C6" ;
#LOCATE COMP "EXT[8]" SITE "D5" ;
#LOCATE COMP "EXT[9]" SITE "D6" ;
#LOCATE COMP "EXT[10]" SITE "A11" ;
#LOCATE COMP "EXT[11]" SITE "A12" ;
#LOCATE COMP "EXT[12]" SITE "B8" ;
#LOCATE COMP "EXT[13]" SITE "B9" ;
#LOCATE COMP "EXT[14]" SITE "B11" ;
#LOCATE COMP "EXT[15]" SITE "C9" ;
#LOCATE COMP "EXT[16]" SITE "C11" ;
#LOCATE COMP "EXT[17]" SITE "D11" ;
#LOCATE COMP "EXT[18]" SITE "D12" ;
#LOCATE COMP "EXT[19]" SITE "E10" ;
#LOCATE COMP "EXT[20]" SITE "E11" ;
#LOCATE COMP "EXT[21]" SITE "E12" ;
#LOCATE COMP "EXT[22]" SITE "L3" ;
#LOCATE COMP "EXT[23]" SITE "M6" ;
#LOCATE COMP "EXT[24]" SITE "N1" ;
#LOCATE COMP "EXT[25]" SITE "P4" ;
#LOCATE COMP "EXT[26]" SITE "P6" ;
#LOCATE COMP "EXT[27]" SITE "T2" ;
#LOCATE COMP "EXT[28]" SITE "T4" ;
#LOCATE COMP "EXT[29]" SITE "E2" ;
#LOCATE COMP "EXT[30]" SITE "F2" ;
#LOCATE COMP "EXT[31]" SITE "F5" ;
#LOCATE COMP "EXT[32]" SITE "G4" ;
#LOCATE COMP "EXT[33]" SITE "G5" ;
#LOCATE COMP "EXT[34]" SITE "J2" ;