51 lines
2.3 KiB
Markdown
51 lines
2.3 KiB
Markdown
|
# NEORV32 Test Setup using the NEORV32 as a Nios II drop-in replacement
|
||
|
|
|
||
|
|
This setup provides a very simple "demo setup" that uses the NEORV32 Qsys/Platform Designer component
|
||
|
|
so that the NEORV32 can be used as a drop-in replacement of the Nios II soft CPU from Intel.
|
||
|
|
The demo is running on the Terasic DE0-Nano FPGA Board.
|
||
|
|
|
||
|
|
The design is based on the de0-nano-test-setup, but the NEORV32 cpu is added as a QSys/Platform Designer
|
||
|
|
component. As an example the DMEM is "external" and uses an Platform Designer SRAM block.
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
For details about the design and use of the NEORV32 as a Qsys/Platform Designer component please
|
||
|
|
look at the Qsys component files and documentation here [`NEORV32 Qsys Component`](../neorv32_qsys_component)
|
||
|
|
|
||
|
|
It uses the simplified simple example top entity that provides a minimalistic interface (clock, reset, UART and 8 LEDs).
|
||
|
|
|
||
|
|
* FPGA Board: :books: [Terasic DE0-Nano FPGA Board](https://www.terasic.com.tw/cgi-bin/page/archive.pl?Language=English&CategoryNo=139&No=593)
|
||
|
|
* FPGA: Intel Cyclone-IV `EP4CE22F17C6N`
|
||
|
|
* Toolchain: Intel Quartus Prime (tested with Quartus Prime 18.1.1 - Lite Edition)
|
||
|
|
|
||
|
|
|
||
|
|
### NEORV32 Configuration
|
||
|
|
|
||
|
|
For NEORV32 configuration the default values of the neorv32_top in version 1.6.0 are used
|
||
|
|
with a few exceptions:
|
||
|
|
|
||
|
|
* Memory: 16kB instruction memory (internal IMEM), 8kB data memory (external DMEM), No bootloader
|
||
|
|
* Tested with version [`1.6.0`](https://github.com/stnolting/neorv32/blob/master/CHANGELOG.md)
|
||
|
|
* Clock: 50MHz from on-board oscillator
|
||
|
|
* Reset: via on-board button "KEY0"
|
||
|
|
* GPIO output port `gpio_o` (8-bit) connected to the 8 green user LEDs ("LED7" - "LED0")
|
||
|
|
* UART0 signals `uart0_txd_o` and `uart0_rxd_i` are connected to the 40-pin **GPIO_0** header
|
||
|
|
* `uart0_txd_o:` output, connected to FPGA pin `C3` - header pin `GPIO_01` (pin number "4")
|
||
|
|
* `uart0_rxd_i:` input, connected to FPGA pin `A3` - header pin `GPIO_03` (pin number "6")
|
||
|
|
|
||
|
|
### FPGA Utilization
|
||
|
|
|
||
|
|
```
|
||
|
|
Total logic elements 4,064 / 22,320 ( 18 % )
|
||
|
|
Total registers 1932
|
||
|
|
Total pins 12 / 154 ( 8 % )
|
||
|
|
Total virtual pins 0
|
||
|
|
Total memory bits 230,400 / 608,256 ( 38 % )
|
||
|
|
Embedded Multiplier 9-bit elements 0 / 132 ( 0 % )
|
||
|
|
Total PLLs 0 / 4 ( 0 % )
|
||
|
|
```
|
||
|
|
|
||
|
|
|
||
|
|
## How To Run
|
||
|
|
|
||
|
|
Open the Quartus project file, compile and upload to FPGA.
|