/** ****************************************************************************** * @file stm32f7xx_hal_mmc.h * @author MCD Application Team * @brief Header file of MMC HAL module. ****************************************************************************** * @attention * * Copyright (c) 2017 STMicroelectronics. * All rights reserved. * * This software is licensed under terms that can be found in the LICENSE file * in the root directory of this software component. * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef STM32F7xx_HAL_MMC_H #define STM32F7xx_HAL_MMC_H #if defined(SDMMC1) #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32f7xx_ll_sdmmc.h" /** @addtogroup STM32F7xx_HAL_Driver * @{ */ /** @addtogroup MMC * @{ */ /* Exported types ------------------------------------------------------------*/ /** @defgroup MMC_Exported_Types MMC Exported Types * @{ */ /** @defgroup MMC_Exported_Types_Group1 MMC State enumeration structure * @{ */ typedef enum { HAL_MMC_STATE_RESET = 0x00000000U, /*!< MMC not yet initialized or disabled */ HAL_MMC_STATE_READY = 0x00000001U, /*!< MMC initialized and ready for use */ HAL_MMC_STATE_TIMEOUT = 0x00000002U, /*!< MMC Timeout state */ HAL_MMC_STATE_BUSY = 0x00000003U, /*!< MMC process ongoing */ HAL_MMC_STATE_PROGRAMMING = 0x00000004U, /*!< MMC Programming State */ HAL_MMC_STATE_RECEIVING = 0x00000005U, /*!< MMC Receinving State */ HAL_MMC_STATE_TRANSFER = 0x00000006U, /*!< MMC Transfer State */ HAL_MMC_STATE_ERROR = 0x0000000FU /*!< MMC is in error state */ }HAL_MMC_StateTypeDef; /** * @} */ /** @defgroup MMC_Exported_Types_Group2 MMC Card State enumeration structure * @{ */ typedef uint32_t HAL_MMC_CardStateTypeDef; #define HAL_MMC_CARD_READY 0x00000001U /*!< Card state is ready */ #define HAL_MMC_CARD_IDENTIFICATION 0x00000002U /*!< Card is in identification state */ #define HAL_MMC_CARD_STANDBY 0x00000003U /*!< Card is in standby state */ #define HAL_MMC_CARD_TRANSFER 0x00000004U /*!< Card is in transfer state */ #define HAL_MMC_CARD_SENDING 0x00000005U /*!< Card is sending an operation */ #define HAL_MMC_CARD_RECEIVING 0x00000006U /*!< Card is receiving operation information */ #define HAL_MMC_CARD_PROGRAMMING 0x00000007U /*!< Card is in programming state */ #define HAL_MMC_CARD_DISCONNECTED 0x00000008U /*!< Card is disconnected */ #define HAL_MMC_CARD_ERROR 0x000000FFU /*!< Card response Error */ /** * @} */ /** @defgroup MMC_Exported_Types_Group3 MMC Handle Structure definition * @{ */ #define MMC_InitTypeDef SDMMC_InitTypeDef #define MMC_TypeDef SDMMC_TypeDef /** * @brief MMC Card Information Structure definition */ typedef struct { uint32_t CardType; /*!< Specifies the card Type */ uint32_t Class; /*!< Specifies the class of the card class */ uint32_t RelCardAdd; /*!< Specifies the Relative Card Address */ uint32_t BlockNbr; /*!< Specifies the Card Capacity in blocks */ uint32_t BlockSize; /*!< Specifies one block size in bytes */ uint32_t LogBlockNbr; /*!< Specifies the Card logical Capacity in blocks */ uint32_t LogBlockSize; /*!< Specifies logical block size in bytes */ }HAL_MMC_CardInfoTypeDef; /** * @brief MMC handle Structure definition */ #if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) typedef struct __MMC_HandleTypeDef #else typedef struct #endif /* USE_HAL_MMC_REGISTER_CALLBACKS */ { MMC_TypeDef *Instance; /*!< MMC registers base address */ MMC_InitTypeDef Init; /*!< MMC required parameters */ HAL_LockTypeDef Lock; /*!< MMC locking object */ uint8_t *pTxBuffPtr; /*!< Pointer to MMC Tx transfer Buffer */ uint32_t TxXferSize; /*!< MMC Tx Transfer size */ uint8_t *pRxBuffPtr; /*!< Pointer to MMC Rx transfer Buffer */ uint32_t RxXferSize; /*!< MMC Rx Transfer size */ __IO uint32_t Context; /*!< MMC transfer context */ __IO HAL_MMC_StateTypeDef State; /*!< MMC card State */ __IO uint32_t ErrorCode; /*!< MMC Card Error codes */ DMA_HandleTypeDef *hdmarx; /*!< MMC Rx DMA handle parameters */ DMA_HandleTypeDef *hdmatx; /*!< MMC Tx DMA handle parameters */ HAL_MMC_CardInfoTypeDef MmcCard; /*!< MMC Card information */ uint32_t CSD[4U]; /*!< MMC card specific data table */ uint32_t CID[4U]; /*!< MMC card identification number table */ uint32_t Ext_CSD[128]; #if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) void (* TxCpltCallback) (struct __MMC_HandleTypeDef *hmmc); void (* RxCpltCallback) (struct __MMC_HandleTypeDef *hmmc); void (* ErrorCallback) (struct __MMC_HandleTypeDef *hmmc); void (* AbortCpltCallback) (struct __MMC_HandleTypeDef *hmmc); void (* MspInitCallback) (struct __MMC_HandleTypeDef *hmmc); void (* MspDeInitCallback) (struct __MMC_HandleTypeDef *hmmc); #endif }MMC_HandleTypeDef; /** * @} */ /** @defgroup MMC_Exported_Types_Group4 Card Specific Data: CSD Register * @{ */ typedef struct { __IO uint8_t CSDStruct; /*!< CSD structure */ __IO uint8_t SysSpecVersion; /*!< System specification version */ __IO uint8_t Reserved1; /*!< Reserved */ __IO uint8_t TAAC; /*!< Data read access time 1 */ __IO uint8_t NSAC; /*!< Data read access time 2 in CLK cycles */ __IO uint8_t MaxBusClkFrec; /*!< Max. bus clock frequency */ __IO uint16_t CardComdClasses; /*!< Card command classes */ __IO uint8_t RdBlockLen; /*!< Max. read data block length */ __IO uint8_t PartBlockRead; /*!< Partial blocks for read allowed */ __IO uint8_t WrBlockMisalign; /*!< Write block misalignment */ __IO uint8_t RdBlockMisalign; /*!< Read block misalignment */ __IO uint8_t DSRImpl; /*!< DSR implemented */ __IO uint8_t Reserved2; /*!< Reserved */ __IO uint32_t DeviceSize; /*!< Device Size */ __IO uint8_t MaxRdCurrentVDDMin; /*!< Max. read current @ VDD min */ __IO uint8_t MaxRdCurrentVDDMax; /*!< Max. read current @ VDD max */ __IO uint8_t MaxWrCurrentVDDMin; /*!< Max. write current @ VDD min */ __IO uint8_t MaxWrCurrentVDDMax; /*!< Max. write current @ VDD max */ __IO uint8_t DeviceSizeMul; /*!< Device size multiplier */ __IO uint8_t EraseGrSize; /*!< Erase group size */ __IO uint8_t EraseGrMul; /*!< Erase group size multiplier */ __IO uint8_t WrProtectGrSize; /*!< Write protect group size */ __IO uint8_t WrProtectGrEnable; /*!< Write protect group enable */ __IO uint8_t ManDeflECC; /*!< Manufacturer default ECC */ __IO uint8_t WrSpeedFact; /*!< Write speed factor */ __IO uint8_t MaxWrBlockLen; /*!< Max. write data block length */ __IO uint8_t WriteBlockPaPartial; /*!< Partial blocks for write allowed */ __IO uint8_t Reserved3; /*!< Reserved */ __IO uint8_t ContentProtectAppli; /*!< Content protection application */ __IO uint8_t FileFormatGroup; /*!< File format group */ __IO uint8_t CopyFlag; /*!< Copy flag (OTP) */ __IO uint8_t PermWrProtect; /*!< Permanent write protection */ __IO uint8_t TempWrProtect; /*!< Temporary write protection */ __IO uint8_t FileFormat; /*!< File format */ __IO uint8_t ECC; /*!< ECC code */ __IO uint8_t CSD_CRC; /*!< CSD CRC */ __IO uint8_t Reserved4; /*!< Always 1 */ }HAL_MMC_CardCSDTypeDef; /** * @} */ /** @defgroup MMC_Exported_Types_Group5 Card Identification Data: CID Register * @{ */ typedef struct { __IO uint8_t ManufacturerID; /*!< Manufacturer ID */ __IO uint16_t OEM_AppliID; /*!< OEM/Application ID */ __IO uint32_t ProdName1; /*!< Product Name part1 */ __IO uint8_t ProdName2; /*!< Product Name part2 */ __IO uint8_t ProdRev; /*!< Product Revision */ __IO uint32_t ProdSN; /*!< Product Serial Number */ __IO uint8_t Reserved1; /*!< Reserved1 */ __IO uint16_t ManufactDate; /*!< Manufacturing Date */ __IO uint8_t CID_CRC; /*!< CID CRC */ __IO uint8_t Reserved2; /*!< Always 1 */ }HAL_MMC_CardCIDTypeDef; /** * @} */ #if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) /** @defgroup MMC_Exported_Types_Group6 MMC Callback ID enumeration definition * @{ */ typedef enum { HAL_MMC_TX_CPLT_CB_ID = 0x00U, /*!< MMC Tx Complete Callback ID */ HAL_MMC_RX_CPLT_CB_ID = 0x01U, /*!< MMC Rx Complete Callback ID */ HAL_MMC_ERROR_CB_ID = 0x02U, /*!< MMC Error Callback ID */ HAL_MMC_ABORT_CB_ID = 0x03U, /*!< MMC Abort Callback ID */ HAL_MMC_MSP_INIT_CB_ID = 0x10U, /*!< MMC MspInit Callback ID */ HAL_MMC_MSP_DEINIT_CB_ID = 0x11U /*!< MMC MspDeInit Callback ID */ }HAL_MMC_CallbackIDTypeDef; /** * @} */ /** @defgroup MMC_Exported_Types_Group7 MMC Callback pointer definition * @{ */ typedef void (*pMMC_CallbackTypeDef) (MMC_HandleTypeDef *hmmc); /** * @} */ #endif /** * @} */ /* Exported constants --------------------------------------------------------*/ /** @defgroup MMC_Exported_Constants Exported Constants * @{ */ #define MMC_BLOCKSIZE 512U /*!< Block size is 512 bytes */ /** @defgroup MMC_Exported_Constansts_Group1 MMC Error status enumeration Structure definition * @{ */ #define HAL_MMC_ERROR_NONE SDMMC_ERROR_NONE /*!< No error */ #define HAL_MMC_ERROR_CMD_CRC_FAIL SDMMC_ERROR_CMD_CRC_FAIL /*!< Command response received (but CRC check failed) */ #define HAL_MMC_ERROR_DATA_CRC_FAIL SDMMC_ERROR_DATA_CRC_FAIL /*!< Data block sent/received (CRC check failed) */ #define HAL_MMC_ERROR_CMD_RSP_TIMEOUT SDMMC_ERROR_CMD_RSP_TIMEOUT /*!< Command response timeout */ #define HAL_MMC_ERROR_DATA_TIMEOUT SDMMC_ERROR_DATA_TIMEOUT /*!< Data timeout */ #define HAL_MMC_ERROR_TX_UNDERRUN SDMMC_ERROR_TX_UNDERRUN /*!< Transmit FIFO underrun */ #define HAL_MMC_ERROR_RX_OVERRUN SDMMC_ERROR_RX_OVERRUN /*!< Receive FIFO overrun */ #define HAL_MMC_ERROR_ADDR_MISALIGNED SDMMC_ERROR_ADDR_MISALIGNED /*!< Misaligned address */ #define HAL_MMC_ERROR_BLOCK_LEN_ERR SDMMC_ERROR_BLOCK_LEN_ERR /*!< Transferred block length is not allowed for the card or the number of transferred bytes does not match the block length */ #define HAL_MMC_ERROR_ERASE_SEQ_ERR SDMMC_ERROR_ERASE_SEQ_ERR /*!< An error in the sequence of erase command occurs */ #define HAL_MMC_ERROR_BAD_ERASE_PARAM SDMMC_ERROR_BAD_ERASE_PARAM /*!< An invalid selection for erase groups */ #define HAL_MMC_ERROR_WRITE_PROT_VIOLATION SDMMC_ERROR_WRITE_PROT_VIOLATION /*!< Attempt to program a write protect block */ #define HAL_MMC_ERROR_LOCK_UNLOCK_FAILED SDMMC_ERROR_LOCK_UNLOCK_FAILED /*!< Sequence or password error has been detected in unlock command or if there was an attempt to access a locked card */ #define HAL_MMC_ERROR_COM_CRC_FAILED SDMMC_ERROR_COM_CRC_FAILED /*!< CRC check of the previous command failed */ #define HAL_MMC_ERROR_ILLEGAL_CMD SDMMC_ERROR_ILLEGAL_CMD /*!< Command is not legal for the card state */ #define HAL_MMC_ERROR_CARD_ECC_FAILED SDMMC_ERROR_CARD_ECC_FAILED /*!< Card internal ECC was applied but failed to correct the data */ #define HAL_MMC_ERROR_CC_ERR SDMMC_ERROR_CC_ERR /*!< Internal card controller error */ #define HAL_MMC_ERROR_GENERAL_UNKNOWN_ERR SDMMC_ERROR_GENERAL_UNKNOWN_ERR /*!< General or unknown error */ #define HAL_MMC_ERROR_STREAM_READ_UNDERRUN SDMMC_ERROR_STREAM_READ_UNDERRUN /*!< The card could not sustain data reading in stream rmode */ #define HAL_MMC_ERROR_STREAM_WRITE_OVERRUN SDMMC_ERROR_STREAM_WRITE_OVERRUN /*!< The card could not sustain data programming in stream mode */ #define HAL_MMC_ERROR_CID_CSD_OVERWRITE SDMMC_ERROR_CID_CSD_OVERWRITE /*!< CID/CSD overwrite error */ #define HAL_MMC_ERROR_WP_ERASE_SKIP SDMMC_ERROR_WP_ERASE_SKIP /*!< Only partial address space was erased */ #define HAL_MMC_ERROR_CARD_ECC_DISABLED SDMMC_ERROR_CARD_ECC_DISABLED /*!< Command has been executed without using internal ECC */ #define HAL_MMC_ERROR_ERASE_RESET SDMMC_ERROR_ERASE_RESET /*!< Erase sequence was cleared before executing because an out of erase sequence command was received */ #define HAL_MMC_ERROR_AKE_SEQ_ERR SDMMC_ERROR_AKE_SEQ_ERR /*!< Error in sequence of authentication */ #define HAL_MMC_ERROR_INVALID_VOLTRANGE SDMMC_ERROR_INVALID_VOLTRANGE /*!< Error in case of invalid voltage range */ #define HAL_MMC_ERROR_ADDR_OUT_OF_RANGE SDMMC_ERROR_ADDR_OUT_OF_RANGE /*!< Error when addressed block is out of range */ #define HAL_MMC_ERROR_REQUEST_NOT_APPLICABLE SDMMC_ERROR_REQUEST_NOT_APPLICABLE /*!< Error when command request is not applicable */ #define HAL_MMC_ERROR_PARAM SDMMC_ERROR_INVALID_PARAMETER /*!< the used parameter is not valid */ #define HAL_MMC_ERROR_UNSUPPORTED_FEATURE SDMMC_ERROR_UNSUPPORTED_FEATURE /*!< Error when feature is not insupported */ #define HAL_MMC_ERROR_BUSY SDMMC_ERROR_BUSY /*!< Error when transfer process is busy */ #define HAL_MMC_ERROR_DMA SDMMC_ERROR_DMA /*!< Error while DMA transfer */ #define HAL_MMC_ERROR_TIMEOUT SDMMC_ERROR_TIMEOUT /*!< Timeout error */ #if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) #define HAL_MMC_ERROR_INVALID_CALLBACK SDMMC_ERROR_INVALID_PARAMETER /*!< Invalid callback error */ #endif /** * @} */ /** @defgroup MMC_Exported_Constansts_Group2 MMC context enumeration * @{ */ #define MMC_CONTEXT_NONE 0x00000000U /*!< None */ #define MMC_CONTEXT_READ_SINGLE_BLOCK 0x00000001U /*!< Read single block operation */ #define MMC_CONTEXT_READ_MULTIPLE_BLOCK 0x00000002U /*!< Read multiple blocks operation */ #define MMC_CONTEXT_WRITE_SINGLE_BLOCK 0x00000010U /*!< Write single block operation */ #define MMC_CONTEXT_WRITE_MULTIPLE_BLOCK 0x00000020U /*!< Write multiple blocks operation */ #define MMC_CONTEXT_IT 0x00000008U /*!< Process in Interrupt mode */ #define MMC_CONTEXT_DMA 0x00000080U /*!< Process in DMA mode */ /** * @} */ /** @defgroup MMC_Exported_Constansts_Group3 MMC Voltage mode * @{ */ /** * @brief */ #define MMC_HIGH_VOLTAGE_RANGE 0x80FF8000U /*!< High voltage in byte mode */ #define MMC_DUAL_VOLTAGE_RANGE 0x80FF8080U /*!< Dual voltage in byte mode */ #define MMC_LOW_VOLTAGE_RANGE 0x80000080U /*!< Low voltage in byte mode */ #define EMMC_HIGH_VOLTAGE_RANGE 0xC0FF8000U /*!< High voltage in sector mode */ #define EMMC_DUAL_VOLTAGE_RANGE 0xC0FF8080U /*!< Dual voltage in sector mode */ #define EMMC_LOW_VOLTAGE_RANGE 0xC0000080U /*!< Low voltage in sector mode */ #define MMC_INVALID_VOLTAGE_RANGE 0x0001FF01U /** * @} */ /** @defgroup MMC_Exported_Constansts_Group4 MMC Memory Cards * @{ */ #define MMC_LOW_CAPACITY_CARD 0x00000000U /*!< MMC Card Capacity <=2Gbytes */ #define MMC_HIGH_CAPACITY_CARD 0x00000001U /*!< MMC Card Capacity >2Gbytes and <2Tbytes */ /** * @} */ /** * @} */ /* Exported macro ------------------------------------------------------------*/ /** @defgroup MMC_Exported_macros MMC Exported Macros * @brief macros to handle interrupts and specific clock configurations * @{ */ /** @brief Reset MMC handle state. * @param __HANDLE__ : MMC handle. * @retval None */ #if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) #define __HAL_MMC_RESET_HANDLE_STATE(__HANDLE__) do { \ (__HANDLE__)->State = HAL_MMC_STATE_RESET; \ (__HANDLE__)->MspInitCallback = NULL; \ (__HANDLE__)->MspDeInitCallback = NULL; \ } while(0) #else #define __HAL_MMC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_MMC_STATE_RESET) #endif /** * @brief Enable the MMC device. * @retval None */ #define __HAL_MMC_ENABLE(__HANDLE__) __SDMMC_ENABLE((__HANDLE__)->Instance) /** * @brief Disable the MMC device. * @retval None */ #define __HAL_MMC_DISABLE(__HANDLE__) __SDMMC_DISABLE((__HANDLE__)->Instance) /** * @brief Enable the SDMMC DMA transfer. * @retval None */ #define __HAL_MMC_DMA_ENABLE(__HANDLE__) __SDMMC_DMA_ENABLE((__HANDLE__)->Instance) /** * @brief Disable the SDMMC DMA transfer. * @retval None */ #define __HAL_MMC_DMA_DISABLE(__HANDLE__) __SDMMC_DMA_DISABLE((__HANDLE__)->Instance) /** * @brief Enable the MMC device interrupt. * @param __HANDLE__: MMC Handle * @param __INTERRUPT__: specifies the SDMMC interrupt sources to be enabled. * This parameter can be one or a combination of the following values: * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt * @arg SDMMC_IT_CMDACT: Command transfer in progress interrupt * @arg SDMMC_IT_TXACT: Data transmit in progress interrupt * @arg SDMMC_IT_RXACT: Data receive in progress interrupt * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt * @arg SDMMC_IT_TXFIFOF: Transmit FIFO full interrupt * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt * @arg SDMMC_IT_RXFIFOE: Receive FIFO empty interrupt * @arg SDMMC_IT_TXDAVL: Data available in transmit FIFO interrupt * @arg SDMMC_IT_RXDAVL: Data available in receive FIFO interrupt * @arg SDMMC_IT_SDIOIT: SD I/O interrupt received interrupt * @retval None */ #define __HAL_MMC_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDMMC_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__)) /** * @brief Disable the MMC device interrupt. * @param __HANDLE__: MMC Handle * @param __INTERRUPT__: specifies the SDMMC interrupt sources to be disabled. * This parameter can be one or a combination of the following values: * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt * @arg SDMMC_IT_CMDACT: Command transfer in progress interrupt * @arg SDMMC_IT_TXACT: Data transmit in progress interrupt * @arg SDMMC_IT_RXACT: Data receive in progress interrupt * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt * @arg SDMMC_IT_TXFIFOF: Transmit FIFO full interrupt * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt * @arg SDMMC_IT_RXFIFOE: Receive FIFO empty interrupt * @arg SDMMC_IT_TXDAVL: Data available in transmit FIFO interrupt * @arg SDMMC_IT_RXDAVL: Data available in receive FIFO interrupt * @arg SDMMC_IT_SDIOIT: SD I/O interrupt received interrupt * @retval None */ #define __HAL_MMC_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDMMC_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__)) /** * @brief Check whether the specified MMC flag is set or not. * @param __HANDLE__: MMC Handle * @param __FLAG__: specifies the flag to check. * This parameter can be one of the following values: * @arg SDMMC_FLAG_CCRCFAIL: Command response received (CRC check failed) * @arg SDMMC_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) * @arg SDMMC_FLAG_CTIMEOUT: Command response timeout * @arg SDMMC_FLAG_DTIMEOUT: Data timeout * @arg SDMMC_FLAG_TXUNDERR: Transmit FIFO underrun error * @arg SDMMC_FLAG_RXOVERR: Received FIFO overrun error * @arg SDMMC_FLAG_CMDREND: Command response received (CRC check passed) * @arg SDMMC_FLAG_CMDSENT: Command sent (no response required) * @arg SDMMC_FLAG_DATAEND: Data end (data counter, DATACOUNT, is zero) * @arg SDMMC_FLAG_DBCKEND: Data block sent/received (CRC check passed) * @arg SDMMC_FLAG_CMDACT: Command transfer in progress * @arg SDMMC_FLAG_TXACT: Data transmit in progress * @arg SDMMC_FLAG_RXACT: Data receive in progress * @arg SDMMC_FLAG_TXFIFOHE: Transmit FIFO Half Empty * @arg SDMMC_FLAG_RXFIFOHF: Receive FIFO Half Full * @arg SDMMC_FLAG_TXFIFOF: Transmit FIFO full * @arg SDMMC_FLAG_RXFIFOF: Receive FIFO full * @arg SDMMC_FLAG_TXFIFOE: Transmit FIFO empty * @arg SDMMC_FLAG_RXFIFOE: Receive FIFO empty * @arg SDMMC_FLAG_TXDAVL: Data available in transmit FIFO * @arg SDMMC_FLAG_RXDAVL: Data available in receive FIFO * @arg SDMMC_FLAG_SDIOIT: SD I/O interrupt received * @retval The new state of MMC FLAG (SET or RESET). */ #define __HAL_MMC_GET_FLAG(__HANDLE__, __FLAG__) __SDMMC_GET_FLAG((__HANDLE__)->Instance, (__FLAG__)) /** * @brief Clear the MMC's pending flags. * @param __HANDLE__: MMC Handle * @param __FLAG__: specifies the flag to clear. * This parameter can be one or a combination of the following values: * @arg SDMMC_FLAG_CCRCFAIL: Command response received (CRC check failed) * @arg SDMMC_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) * @arg SDMMC_FLAG_CTIMEOUT: Command response timeout * @arg SDMMC_FLAG_DTIMEOUT: Data timeout * @arg SDMMC_FLAG_TXUNDERR: Transmit FIFO underrun error * @arg SDMMC_FLAG_RXOVERR: Received FIFO overrun error * @arg SDMMC_FLAG_CMDREND: Command response received (CRC check passed) * @arg SDMMC_FLAG_CMDSENT: Command sent (no response required) * @arg SDMMC_FLAG_DATAEND: Data end (data counter, DATACOUNT, is zero) * @arg SDMMC_FLAG_DBCKEND: Data block sent/received (CRC check passed) * @arg SDMMC_FLAG_SDIOIT: SD I/O interrupt received * @retval None */ #define __HAL_MMC_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDMMC_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__)) /** * @brief Check whether the specified MMC interrupt has occurred or not. * @param __HANDLE__: MMC Handle * @param __INTERRUPT__: specifies the SDMMC interrupt source to check. * This parameter can be one of the following values: * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt * @arg SDMMC_IT_CMDACT: Command transfer in progress interrupt * @arg SDMMC_IT_TXACT: Data transmit in progress interrupt * @arg SDMMC_IT_RXACT: Data receive in progress interrupt * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt * @arg SDMMC_IT_TXFIFOF: Transmit FIFO full interrupt * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt * @arg SDMMC_IT_RXFIFOE: Receive FIFO empty interrupt * @arg SDMMC_IT_TXDAVL: Data available in transmit FIFO interrupt * @arg SDMMC_IT_RXDAVL: Data available in receive FIFO interrupt * @arg SDMMC_IT_SDIOIT: SD I/O interrupt received interrupt * @retval The new state of MMC IT (SET or RESET). */ #define __HAL_MMC_GET_IT(__HANDLE__, __INTERRUPT__) __SDMMC_GET_IT((__HANDLE__)->Instance, (__INTERRUPT__)) /** * @brief Clear the MMC's interrupt pending bits. * @param __HANDLE__: MMC Handle * @param __INTERRUPT__: specifies the interrupt pending bit to clear. * This parameter can be one or a combination of the following values: * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt * @arg SDMMC_IT_SDIOIT: SD I/O interrupt received interrupt * @retval None */ #define __HAL_MMC_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDMMC_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__)) /** * @} */ /* Exported functions --------------------------------------------------------*/ /** @defgroup MMC_Exported_Functions MMC Exported Functions * @{ */ /** @defgroup MMC_Exported_Functions_Group1 Initialization and de-initialization functions * @{ */ HAL_StatusTypeDef HAL_MMC_Init(MMC_HandleTypeDef *hmmc); HAL_StatusTypeDef HAL_MMC_InitCard(MMC_HandleTypeDef *hmmc); HAL_StatusTypeDef HAL_MMC_DeInit (MMC_HandleTypeDef *hmmc); void HAL_MMC_MspInit(MMC_HandleTypeDef *hmmc); void HAL_MMC_MspDeInit(MMC_HandleTypeDef *hmmc); /** * @} */ /** @defgroup MMC_Exported_Functions_Group2 Input and Output operation functions * @{ */ /* Blocking mode: Polling */ HAL_StatusTypeDef HAL_MMC_ReadBlocks(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout); HAL_StatusTypeDef HAL_MMC_WriteBlocks(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout); HAL_StatusTypeDef HAL_MMC_Erase(MMC_HandleTypeDef *hmmc, uint32_t BlockStartAdd, uint32_t BlockEndAdd); /* Non-Blocking mode: IT */ HAL_StatusTypeDef HAL_MMC_ReadBlocks_IT(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks); HAL_StatusTypeDef HAL_MMC_WriteBlocks_IT(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks); /* Non-Blocking mode: DMA */ HAL_StatusTypeDef HAL_MMC_ReadBlocks_DMA(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks); HAL_StatusTypeDef HAL_MMC_WriteBlocks_DMA(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks); void HAL_MMC_IRQHandler(MMC_HandleTypeDef *hmmc); /* Callback in non blocking modes (DMA) */ void HAL_MMC_TxCpltCallback(MMC_HandleTypeDef *hmmc); void HAL_MMC_RxCpltCallback(MMC_HandleTypeDef *hmmc); void HAL_MMC_ErrorCallback(MMC_HandleTypeDef *hmmc); void HAL_MMC_AbortCallback(MMC_HandleTypeDef *hmmc); #if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) /* MMC callback registering/unregistering */ HAL_StatusTypeDef HAL_MMC_RegisterCallback (MMC_HandleTypeDef *hmmc, HAL_MMC_CallbackIDTypeDef CallbackId, pMMC_CallbackTypeDef pCallback); HAL_StatusTypeDef HAL_MMC_UnRegisterCallback(MMC_HandleTypeDef *hmmc, HAL_MMC_CallbackIDTypeDef CallbackId); #endif /** * @} */ /** @defgroup MMC_Exported_Functions_Group3 Peripheral Control functions * @{ */ HAL_StatusTypeDef HAL_MMC_ConfigWideBusOperation(MMC_HandleTypeDef *hmmc, uint32_t WideMode); /** * @} */ /** @defgroup MMC_Exported_Functions_Group4 MMC card related functions * @{ */ HAL_MMC_CardStateTypeDef HAL_MMC_GetCardState(MMC_HandleTypeDef *hmmc); HAL_StatusTypeDef HAL_MMC_GetCardCID(MMC_HandleTypeDef *hmmc, HAL_MMC_CardCIDTypeDef *pCID); HAL_StatusTypeDef HAL_MMC_GetCardCSD(MMC_HandleTypeDef *hmmc, HAL_MMC_CardCSDTypeDef *pCSD); HAL_StatusTypeDef HAL_MMC_GetCardInfo(MMC_HandleTypeDef *hmmc, HAL_MMC_CardInfoTypeDef *pCardInfo); HAL_StatusTypeDef HAL_MMC_GetCardExtCSD(MMC_HandleTypeDef *hmmc, uint32_t *pExtCSD, uint32_t Timeout); /** * @} */ /** @defgroup MMC_Exported_Functions_Group5 Peripheral State and Errors functions * @{ */ HAL_MMC_StateTypeDef HAL_MMC_GetState(MMC_HandleTypeDef *hmmc); uint32_t HAL_MMC_GetError(MMC_HandleTypeDef *hmmc); /** * @} */ /** @defgroup MMC_Exported_Functions_Group6 Peripheral Abort management * @{ */ HAL_StatusTypeDef HAL_MMC_Abort(MMC_HandleTypeDef *hmmc); HAL_StatusTypeDef HAL_MMC_Abort_IT(MMC_HandleTypeDef *hmmc); /** * @} */ /* Private types -------------------------------------------------------------*/ /** @defgroup MMC_Private_Types MMC Private Types * @{ */ /** * @} */ /* Private defines -----------------------------------------------------------*/ /** @defgroup MMC_Private_Defines MMC Private Defines * @{ */ /** * @} */ /* Private variables ---------------------------------------------------------*/ /** @defgroup MMC_Private_Variables MMC Private Variables * @{ */ /** * @} */ /* Private constants ---------------------------------------------------------*/ /** @defgroup MMC_Private_Constants MMC Private Constants * @{ */ /** * @} */ /* Private macros ------------------------------------------------------------*/ /** @defgroup MMC_Private_Macros MMC Private Macros * @{ */ /** * @} */ /* Private functions prototypes ----------------------------------------------*/ /** @defgroup MMC_Private_Functions_Prototypes MMC Private Functions Prototypes * @{ */ /** * @} */ /* Private functions ---------------------------------------------------------*/ /** @defgroup MMC_Private_Functions MMC Private Functions * @{ */ /** * @} */ /** * @} */ /** * @} */ /** * @} */ #ifdef __cplusplus } #endif #endif /* SDMMC1 */ #endif /* STM32F7xx_HAL_MMC_H */