/**
  TMR2 Generated Driver API Header File

  @Company
    Microchip Technology Inc.

  @File Name
    tmr2.h

  @Summary
    This is the generated header file for the TMR2 driver using PIC10 / PIC12 / PIC16 / PIC18 MCUs

  @Description
    This header file provides APIs for TMR2.
    Generation Information :
        Product Revision  :  PIC10 / PIC12 / PIC16 / PIC18 MCUs - 1.81.8
        Device            :  PIC18F97J60
        Driver Version    :  2.01
    The generated drivers are tested against the following:
        Compiler          :  XC8 2.36 and above
        MPLAB 	          :  MPLAB X 6.00
*/

/*
    (c) 2018 Microchip Technology Inc. and its subsidiaries. 
    
    Subject to your compliance with these terms, you may use Microchip software and any 
    derivatives exclusively with Microchip products. It is your responsibility to comply with third party 
    license terms applicable to your use of third party software (including open source software) that 
    may accompany Microchip software.
    
    THIS SOFTWARE IS SUPPLIED BY MICROCHIP "AS IS". NO WARRANTIES, WHETHER 
    EXPRESS, IMPLIED OR STATUTORY, APPLY TO THIS SOFTWARE, INCLUDING ANY 
    IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, AND FITNESS 
    FOR A PARTICULAR PURPOSE.
    
    IN NO EVENT WILL MICROCHIP BE LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE, 
    INCIDENTAL OR CONSEQUENTIAL LOSS, DAMAGE, COST OR EXPENSE OF ANY KIND 
    WHATSOEVER RELATED TO THE SOFTWARE, HOWEVER CAUSED, EVEN IF MICROCHIP 
    HAS BEEN ADVISED OF THE POSSIBILITY OR THE DAMAGES ARE FORESEEABLE. TO 
    THE FULLEST EXTENT ALLOWED BY LAW, MICROCHIP'S TOTAL LIABILITY ON ALL 
    CLAIMS IN ANY WAY RELATED TO THIS SOFTWARE WILL NOT EXCEED THE AMOUNT 
    OF FEES, IF ANY, THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THIS 
    SOFTWARE.
*/

#ifndef TMR2_H
#define TMR2_H

/**
  Section: Included Files
*/

#include <stdint.h>
#include <stdbool.h>

#ifdef __cplusplus  // Provide C++ Compatibility

    extern "C" {

#endif


/**
  Section: Macro Declarations
*/

/**
  Section: TMR2 APIs
*/

/**
  @Summary
    Initializes the TMR2 module.

  @Description
    This function initializes the TMR2 Registers.
    This function must be called before any other TMR2 function is called.

  @Preconditions
    None

  @Param
    None

  @Returns
    None

  @Comment
    

  @Example
    <code>
    main()
    {
        // Initialize TMR2 module
        TMR2_Initialize();

        // Do something else...
    }
    </code>
*/
void TMR2_Initialize(void);

/**
  @Summary
    This function starts the TMR2.

  @Description
    This function starts the TMR2 operation.
    This function must be called after the initialization of TMR2.

  @Preconditions
    Initialize  the TMR2 before calling this function.

  @Param
    None

  @Returns
    None

  @Example
    <code>
    // Initialize TMR2 module

    // Start TMR2
    TMR2_StartTimer();

    // Do something else...
    </code>
*/
void TMR2_StartTimer(void);

/**
  @Summary
    This function stops the TMR2.

  @Description
    This function stops the TMR2 operation.
    This function must be called after the start of TMR2.

  @Preconditions
    Initialize  the TMR2 before calling this function.

  @Param
    None

  @Returns
    None

  @Example
    <code>
    // Initialize TMR2 module

    // Start TMR2
    TMR2_StartTimer();

    // Do something else...

    // Stop TMR2;
    TMR2_StopTimer();
    </code>
*/
void TMR2_StopTimer(void);

/**
  @Summary
    Reads the TMR2 register.

  @Description
    This function reads the TMR2 register value and return it.

  @Preconditions
    Initialize  the TMR2 before calling this function.

  @Param
    None

  @Returns
    This function returns the current value of TMR2 register.

  @Example
    <code>
    // Initialize TMR2 module

    // Start TMR2
    TMR2_StartTimer();

    // Read the current value of TMR2
    if(0 == TMR2_ReadTimer())
    {
        // Do something else...

        // Reload the TMR value
        TMR2_Reload();
    }
    </code>
*/
uint8_t TMR2_ReadTimer(void);

/**
  @Summary
    Writes the TMR2 register.

  @Description
    This function writes the TMR2 register.
    This function must be called after the initialization of TMR2.

  @Preconditions
    Initialize  the TMR2 before calling this function.

  @Param
    timerVal - Value to write into TMR2 register.

  @Returns
    None

  @Example
    <code>
    #define PERIOD 0x80
    #define ZERO   0x00

    while(1)
    {
        // Read the TMR2 register
        if(ZERO == TMR2_ReadTimer())
        {
            // Do something else...

            // Write the TMR2 register
            TMR2_WriteTimer(PERIOD);
        }

        // Do something else...
    }
    </code>
*/
void TMR2_WriteTimer(uint8_t timerVal);

/**
  @Summary
    Load value to Period Register.

  @Description
    This function writes the value to PR2 register.
    This function must be called after the initialization of TMR2.

  @Preconditions
    Initialize  the TMR2 before calling this function.

  @Param
    periodVal - Value to load into TMR2 register.

  @Returns
    None

  @Example
    <code>
    #define PERIOD1 0x80
    #define PERIOD2 0x40
    #define ZERO    0x00

    while(1)
    {
        // Read the TMR2 register
        if(ZERO == TMR2_ReadTimer())
        {
            // Do something else...

            if(flag)
            {
                flag = 0;

                // Load Period 1 value
                TMR2_LoadPeriodRegister(PERIOD1);
            }
            else
            {
                 flag = 1;

                // Load Period 2 value
                TMR2_LoadPeriodRegister(PERIOD2);
            }
        }

        // Do something else...
    }
    </code>
*/
void TMR2_LoadPeriodRegister(uint8_t periodVal);

/**
  @Summary
    Boolean routine to poll or to check for the match flag on the fly.

  @Description
    This function is called to check for the timer match flag.
    This function is used in timer polling method.

  @Preconditions
    Initialize  the TMR2 module before calling this routine.

  @Param
    None

  @Returns
    true - timer match has occurred.
    false - timer match has not occurred.

  @Example
    <code>
    while(1)
    {
        // check the match flag
        if(TMR2_HasOverflowOccured())
        {
            // Do something else...

            // Reload the TMR2 value
            TMR2_Reload();
        }
    }
    </code>
*/
bool TMR2_HasOverflowOccured(void);

 #ifdef __cplusplus  // Provide C++ Compatibility

    }

#endif

#endif // TMR2_H
/**
 End of File
*/