478 lines
10 KiB
C
478 lines
10 KiB
C
/**
|
|
EUSART1 Generated Driver API Header File
|
|
|
|
@Company
|
|
Microchip Technology Inc.
|
|
|
|
@File Name
|
|
eusart1.h
|
|
|
|
@Summary
|
|
This is the generated header file for the EUSART1 driver using PIC10 / PIC12 / PIC16 / PIC18 MCUs
|
|
|
|
@Description
|
|
This header file provides APIs for driver for EUSART1.
|
|
Generation Information :
|
|
Product Revision : PIC10 / PIC12 / PIC16 / PIC18 MCUs - 1.81.8
|
|
Device : PIC18F97J60
|
|
Driver Version : 2.1.1
|
|
The generated drivers are tested against the following:
|
|
Compiler : XC8 2.36 and above
|
|
MPLAB : MPLAB X 6.00
|
|
*/
|
|
|
|
/*
|
|
(c) 2018 Microchip Technology Inc. and its subsidiaries.
|
|
|
|
Subject to your compliance with these terms, you may use Microchip software and any
|
|
derivatives exclusively with Microchip products. It is your responsibility to comply with third party
|
|
license terms applicable to your use of third party software (including open source software) that
|
|
may accompany Microchip software.
|
|
|
|
THIS SOFTWARE IS SUPPLIED BY MICROCHIP "AS IS". NO WARRANTIES, WHETHER
|
|
EXPRESS, IMPLIED OR STATUTORY, APPLY TO THIS SOFTWARE, INCLUDING ANY
|
|
IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, AND FITNESS
|
|
FOR A PARTICULAR PURPOSE.
|
|
|
|
IN NO EVENT WILL MICROCHIP BE LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE,
|
|
INCIDENTAL OR CONSEQUENTIAL LOSS, DAMAGE, COST OR EXPENSE OF ANY KIND
|
|
WHATSOEVER RELATED TO THE SOFTWARE, HOWEVER CAUSED, EVEN IF MICROCHIP
|
|
HAS BEEN ADVISED OF THE POSSIBILITY OR THE DAMAGES ARE FORESEEABLE. TO
|
|
THE FULLEST EXTENT ALLOWED BY LAW, MICROCHIP'S TOTAL LIABILITY ON ALL
|
|
CLAIMS IN ANY WAY RELATED TO THIS SOFTWARE WILL NOT EXCEED THE AMOUNT
|
|
OF FEES, IF ANY, THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THIS
|
|
SOFTWARE.
|
|
*/
|
|
|
|
#ifndef EUSART1_H
|
|
#define EUSART1_H
|
|
|
|
/**
|
|
Section: Included Files
|
|
*/
|
|
|
|
#include <xc.h>
|
|
#include <stdbool.h>
|
|
#include <stdint.h>
|
|
|
|
#ifdef __cplusplus // Provide C++ Compatibility
|
|
|
|
extern "C" {
|
|
|
|
#endif
|
|
|
|
|
|
/**
|
|
Section: Macro Declarations
|
|
*/
|
|
|
|
#define EUSART1_DataReady (EUSART1_is_rx_ready())
|
|
|
|
/**
|
|
Section: Data Type Definitions
|
|
*/
|
|
|
|
typedef union {
|
|
struct {
|
|
unsigned perr : 1;
|
|
unsigned ferr : 1;
|
|
unsigned oerr : 1;
|
|
unsigned reserved : 5;
|
|
};
|
|
uint8_t status;
|
|
}eusart1_status_t;
|
|
|
|
/**
|
|
Section: Global variables
|
|
*/
|
|
extern volatile uint8_t eusart1TxBufferRemaining;
|
|
extern volatile uint8_t eusart1RxCount;
|
|
|
|
/**
|
|
Section: EUSART1 APIs
|
|
*/
|
|
|
|
void (*EUSART1_RxDefaultInterruptHandler)(void);
|
|
|
|
/**
|
|
@Summary
|
|
Initialization routine that takes inputs from the EUSART1 GUI.
|
|
|
|
@Description
|
|
This routine initializes the EUSART1 driver.
|
|
This routine must be called before any other EUSART1 routine is called.
|
|
|
|
@Preconditions
|
|
None
|
|
|
|
@Param
|
|
None
|
|
|
|
@Returns
|
|
None
|
|
|
|
@Comment
|
|
|
|
*/
|
|
void EUSART1_Initialize(void);
|
|
|
|
/**
|
|
@Summary
|
|
Checks if the EUSART1 transmitter is ready to transmit data
|
|
|
|
@Description
|
|
This routine checks if EUSART1 transmitter is ready
|
|
to accept and transmit data byte
|
|
|
|
@Preconditions
|
|
EUSART1_Initialize() function should have been called
|
|
before calling this function.
|
|
EUSART1 transmitter should be enabled before calling
|
|
this function
|
|
|
|
@Param
|
|
None
|
|
|
|
@Returns
|
|
Status of EUSART1 transmitter
|
|
TRUE: EUSART1 transmitter is ready
|
|
FALSE: EUSART1 transmitter is not ready
|
|
|
|
@Example
|
|
<code>
|
|
void main(void)
|
|
{
|
|
volatile uint8_t rxData;
|
|
|
|
// Initialize the device
|
|
SYSTEM_Initialize();
|
|
|
|
while(1)
|
|
{
|
|
// Logic to echo received data
|
|
if(EUSART1_is_rx_ready())
|
|
{
|
|
rxData = UART1_Read();
|
|
if(EUSART1_is_tx_ready())
|
|
{
|
|
EUSART1Write(rxData);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
</code>
|
|
*/
|
|
bool EUSART1_is_tx_ready(void);
|
|
|
|
/**
|
|
@Summary
|
|
Checks if the EUSART1 receiver ready for reading
|
|
|
|
@Description
|
|
This routine checks if EUSART1 receiver has received data
|
|
and ready to be read
|
|
|
|
@Preconditions
|
|
EUSART1_Initialize() function should be called
|
|
before calling this function
|
|
EUSART1 receiver should be enabled before calling this
|
|
function
|
|
|
|
@Param
|
|
None
|
|
|
|
@Returns
|
|
Status of EUSART1 receiver
|
|
TRUE: EUSART1 receiver is ready for reading
|
|
FALSE: EUSART1 receiver is not ready for reading
|
|
|
|
@Example
|
|
<code>
|
|
void main(void)
|
|
{
|
|
volatile uint8_t rxData;
|
|
|
|
// Initialize the device
|
|
SYSTEM_Initialize();
|
|
|
|
while(1)
|
|
{
|
|
// Logic to echo received data
|
|
if(EUSART1_is_rx_ready())
|
|
{
|
|
rxData = UART1_Read();
|
|
if(EUSART1_is_tx_ready())
|
|
{
|
|
EUSART1_Write(rxData);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
</code>
|
|
*/
|
|
bool EUSART1_is_rx_ready(void);
|
|
|
|
/**
|
|
@Summary
|
|
Checks if EUSART1 data is transmitted
|
|
|
|
@Description
|
|
This function return the status of transmit shift register
|
|
|
|
@Preconditions
|
|
EUSART1_Initialize() function should be called
|
|
before calling this function
|
|
EUSART1 transmitter should be enabled and EUSART1_Write
|
|
should be called before calling this function
|
|
|
|
@Param
|
|
None
|
|
|
|
@Returns
|
|
Status of EUSART1 receiver
|
|
TRUE: Data completely shifted out if the USART shift register
|
|
FALSE: Data is not completely shifted out of the shift register
|
|
|
|
@Example
|
|
<code>
|
|
void main(void)
|
|
{
|
|
volatile uint8_t rxData;
|
|
|
|
// Initialize the device
|
|
SYSTEM_Initialize();
|
|
|
|
while(1)
|
|
{
|
|
if(EUSART1_is_tx_ready())
|
|
{
|
|
LED_0_SetHigh();
|
|
EUSART1Write(rxData);
|
|
}
|
|
if(EUSART1_is_tx_done()
|
|
{
|
|
LED_0_SetLow();
|
|
}
|
|
}
|
|
}
|
|
</code>
|
|
*/
|
|
bool EUSART1_is_tx_done(void);
|
|
|
|
/**
|
|
@Summary
|
|
Gets the error status of the last read byte.
|
|
|
|
@Description
|
|
This routine gets the error status of the last read byte.
|
|
|
|
@Preconditions
|
|
EUSART1_Initialize() function should have been called
|
|
before calling this function. The returned value is only
|
|
updated after a read is called.
|
|
|
|
@Param
|
|
None
|
|
|
|
@Returns
|
|
the status of the last read byte
|
|
|
|
@Example
|
|
<code>
|
|
void main(void)
|
|
{
|
|
volatile uint8_t rxData;
|
|
volatile eusart1_status_t rxStatus;
|
|
|
|
// Initialize the device
|
|
SYSTEM_Initialize();
|
|
|
|
// Enable the Global Interrupts
|
|
INTERRUPT_GlobalInterruptEnable();
|
|
|
|
while(1)
|
|
{
|
|
// Logic to echo received data
|
|
if(EUSART1_is_rx_ready())
|
|
{
|
|
rxData = EUSART1_Read();
|
|
rxStatus = EUSART1_get_last_status();
|
|
if(rxStatus.ferr){
|
|
LED_0_SetHigh();
|
|
}
|
|
}
|
|
}
|
|
}
|
|
</code>
|
|
*/
|
|
eusart1_status_t EUSART1_get_last_status(void);
|
|
|
|
/**
|
|
@Summary
|
|
Read a byte of data from the EUSART1.
|
|
|
|
@Description
|
|
This routine reads a byte of data from the EUSART1.
|
|
|
|
@Preconditions
|
|
EUSART1_Initialize() function should have been called
|
|
before calling this function. The transfer status should be checked to see
|
|
if the receiver is not empty before calling this function.
|
|
|
|
@Param
|
|
None
|
|
|
|
@Returns
|
|
A data byte received by the driver.
|
|
*/
|
|
uint8_t EUSART1_Read(void);
|
|
|
|
/**
|
|
@Summary
|
|
Writes a byte of data to the EUSART1.
|
|
|
|
@Description
|
|
This routine writes a byte of data to the EUSART1.
|
|
|
|
@Preconditions
|
|
EUSART1_Initialize() function should have been called
|
|
before calling this function. The transfer status should be checked to see
|
|
if transmitter is not busy before calling this function.
|
|
|
|
@Param
|
|
txData - Data byte to write to the EUSART1
|
|
|
|
@Returns
|
|
None
|
|
*/
|
|
void EUSART1_Write(uint8_t txData);
|
|
|
|
|
|
/**
|
|
@Summary
|
|
Maintains the driver's receiver state machine and implements its ISR
|
|
|
|
@Description
|
|
This routine is used to maintain the driver's internal receiver state
|
|
machine.This interrupt service routine is called when the state of the
|
|
receiver needs to be maintained in a non polled manner.
|
|
|
|
@Preconditions
|
|
EUSART1_Initialize() function should have been called
|
|
for the ISR to execute correctly.
|
|
|
|
@Param
|
|
None
|
|
|
|
@Returns
|
|
None
|
|
*/
|
|
void EUSART1_Receive_ISR(void);
|
|
|
|
/**
|
|
@Summary
|
|
Maintains the driver's receiver state machine
|
|
|
|
@Description
|
|
This routine is called by the receive state routine and is used to maintain
|
|
the driver's internal receiver state machine. It should be called by a custom
|
|
ISR to maintain normal behavior
|
|
|
|
@Preconditions
|
|
EUSART1_Initialize() function should have been called
|
|
for the ISR to execute correctly.
|
|
|
|
@Param
|
|
None
|
|
|
|
@Returns
|
|
None
|
|
*/
|
|
void EUSART1_RxDataHandler(void);
|
|
|
|
/**
|
|
@Summary
|
|
Set EUSART1 Framing Error Handler
|
|
|
|
@Description
|
|
This API sets the function to be called upon EUSART1 framing error
|
|
|
|
@Preconditions
|
|
Initialize the EUSART1 before calling this API
|
|
|
|
@Param
|
|
Address of function to be set as framing error handler
|
|
|
|
@Returns
|
|
None
|
|
*/
|
|
void EUSART1_SetFramingErrorHandler(void (* interruptHandler)(void));
|
|
|
|
/**
|
|
@Summary
|
|
Set EUSART1 Overrun Error Handler
|
|
|
|
@Description
|
|
This API sets the function to be called upon EUSART1 overrun error
|
|
|
|
@Preconditions
|
|
Initialize the EUSART1 module before calling this API
|
|
|
|
@Param
|
|
Address of function to be set as overrun error handler
|
|
|
|
@Returns
|
|
None
|
|
*/
|
|
void EUSART1_SetOverrunErrorHandler(void (* interruptHandler)(void));
|
|
|
|
/**
|
|
@Summary
|
|
Set EUSART1 Error Handler
|
|
|
|
@Description
|
|
This API sets the function to be called upon EUSART1 error
|
|
|
|
@Preconditions
|
|
Initialize the EUSART1 module before calling this API
|
|
|
|
@Param
|
|
Address of function to be set as error handler
|
|
|
|
@Returns
|
|
None
|
|
*/
|
|
void EUSART1_SetErrorHandler(void (* interruptHandler)(void));
|
|
|
|
|
|
/**
|
|
@Summary
|
|
Sets the receive handler function to be called by the interrupt service
|
|
|
|
@Description
|
|
Calling this function will set a new custom function that will be
|
|
called when the receive interrupt needs servicing.
|
|
|
|
@Preconditions
|
|
EUSART1_Initialize() function should have been called
|
|
for the ISR to execute correctly.
|
|
|
|
@Param
|
|
A pointer to the new function
|
|
|
|
@Returns
|
|
None
|
|
*/
|
|
void EUSART1_SetRxInterruptHandler(void (* interruptHandler)(void));
|
|
|
|
#ifdef __cplusplus // Provide C++ Compatibility
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
#endif // EUSART1_H
|
|
/**
|
|
End of File
|
|
*/
|