Klagarge/PTR-Events
Archived
1
0
Fork 0
Code Issues Pull Requests Releases Activity

Initial commit

Browse Source
This commit is contained in:
Rémi Heredero
2024-04-08 12:52:52 +02:00
commit 26880f9bb8
17 changed files with 6532 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

64
RTE/CMSIS/RTX_Config.c Normal file
View File

@ -0,0 +1,64 @@
/*
* Copyright (c) 2013-2021 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* -----------------------------------------------------------------------------
*
* $Revision: V5.1.1
*
* Project: CMSIS-RTOS RTX
* Title: RTX Configuration
*
* -----------------------------------------------------------------------------
*/
#include "cmsis_compiler.h"
#include "rtx_os.h"
// OS Idle Thread
__WEAK __NO_RETURN void osRtxIdleThread (void *argument) {
(void)argument;
for (;;) {}
}
// OS Error Callback function
__WEAK uint32_t osRtxErrorNotify (uint32_t code, void *object_id) {
(void)object_id;
switch (code) {
case osRtxErrorStackOverflow:
// Stack overflow detected for thread (thread_id=object_id)
break;
case osRtxErrorISRQueueOverflow:
// ISR Queue overflow detected when inserting object (object_id)
break;
case osRtxErrorTimerQueueOverflow:
// User Timer Callback Queue overflow detected for timer (timer_id=object_id)
break;
case osRtxErrorClibSpace:
// Standard C/C++ library libspace not available: increase OS_THREAD_LIBSPACE_NUM
break;
case osRtxErrorClibMutex:
// Standard C/C++ library mutex initialization failed
break;
default:
// Reserved
break;
}
for (;;) {}
//return 0U;
}

580
RTE/CMSIS/RTX_Config.h Normal file
View File

@ -0,0 +1,580 @@
/*
* Copyright (c) 2013-2021 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* -----------------------------------------------------------------------------
*
* $Revision: V5.5.2
*
* Project: CMSIS-RTOS RTX
* Title: RTX Configuration definitions
*
* -----------------------------------------------------------------------------
*/
#ifndef RTX_CONFIG_H_
#define RTX_CONFIG_H_
#ifdef _RTE_
#include "RTE_Components.h"
#ifdef RTE_RTX_CONFIG_H
#include RTE_RTX_CONFIG_H
#endif
#endif
//-------- <<< Use Configuration Wizard in Context Menu >>> --------------------
// <h>System Configuration
// =======================
// <o>Global Dynamic Memory size [bytes] <0-1073741824:8>
// <i> Defines the combined global dynamic memory size.
// <i> Default: 32768
#ifndef OS_DYNAMIC_MEM_SIZE
#define OS_DYNAMIC_MEM_SIZE 32768
#endif
// <o>Kernel Tick Frequency [Hz] <1-1000000>
// <i> Defines base time unit for delays and timeouts.
// <i> Default: 1000 (1ms tick)
#ifndef OS_TICK_FREQ
#define OS_TICK_FREQ 1000
#endif
// <e>Round-Robin Thread switching
// <i> Enables Round-Robin Thread switching.
#ifndef OS_ROBIN_ENABLE
#define OS_ROBIN_ENABLE 1
#endif
// <o>Round-Robin Timeout <1-1000>
// <i> Defines how many ticks a thread will execute before a thread switch.
// <i> Default: 5
#ifndef OS_ROBIN_TIMEOUT
#define OS_ROBIN_TIMEOUT 5
#endif
// </e>
// <o>ISR FIFO Queue
// <4=> 4 entries <8=> 8 entries <12=> 12 entries <16=> 16 entries
// <24=> 24 entries <32=> 32 entries <48=> 48 entries <64=> 64 entries
// <96=> 96 entries <128=> 128 entries <196=> 196 entries <256=> 256 entries
// <i> RTOS Functions called from ISR store requests to this buffer.
// <i> Default: 16 entries
#ifndef OS_ISR_FIFO_QUEUE
#define OS_ISR_FIFO_QUEUE 16
#endif
// <q>Object Memory usage counters
// <i> Enables object memory usage counters (requires RTX source variant).
#ifndef OS_OBJ_MEM_USAGE
#define OS_OBJ_MEM_USAGE 0
#endif
// </h>
// <h>Thread Configuration
// =======================
// <e>Object specific Memory allocation
// <i> Enables object specific memory allocation.
#ifndef OS_THREAD_OBJ_MEM
#define OS_THREAD_OBJ_MEM 0
#endif
// <o>Number of user Threads <1-1000>
// <i> Defines maximum number of user threads that can be active at the same time.
// <i> Applies to user threads with system provided memory for control blocks.
#ifndef OS_THREAD_NUM
#define OS_THREAD_NUM 1
#endif
// <o>Number of user Threads with default Stack size <0-1000>
// <i> Defines maximum number of user threads with default stack size.
// <i> Applies to user threads with zero stack size specified.
#ifndef OS_THREAD_DEF_STACK_NUM
#define OS_THREAD_DEF_STACK_NUM 0
#endif
// <o>Total Stack size [bytes] for user Threads with user-provided Stack size <0-1073741824:8>
// <i> Defines the combined stack size for user threads with user-provided stack size.
// <i> Applies to user threads with user-provided stack size and system provided memory for stack.
// <i> Default: 0
#ifndef OS_THREAD_USER_STACK_SIZE
#define OS_THREAD_USER_STACK_SIZE 0
#endif
// </e>
// <o>Default Thread Stack size [bytes] <96-1073741824:8>
// <i> Defines stack size for threads with zero stack size specified.
// <i> Default: 3072
#ifndef OS_STACK_SIZE
#define OS_STACK_SIZE 3072
#endif
// <o>Idle Thread Stack size [bytes] <72-1073741824:8>
// <i> Defines stack size for Idle thread.
// <i> Default: 512
#ifndef OS_IDLE_THREAD_STACK_SIZE
#define OS_IDLE_THREAD_STACK_SIZE 512
#endif
// <o>Idle Thread TrustZone Module Identifier
// <i> Defines TrustZone Thread Context Management Identifier.
// <i> Applies only to cores with TrustZone technology.
// <i> Default: 0 (not used)
#ifndef OS_IDLE_THREAD_TZ_MOD_ID
#define OS_IDLE_THREAD_TZ_MOD_ID 0
#endif
// <q>Stack overrun checking
// <i> Enables stack overrun check at thread switch (requires RTX source variant).
// <i> Enabling this option increases slightly the execution time of a thread switch.
#ifndef OS_STACK_CHECK
#define OS_STACK_CHECK 0
#endif
// <q>Stack usage watermark
// <i> Initializes thread stack with watermark pattern for analyzing stack usage.
// <i> Enabling this option increases significantly the execution time of thread creation.
#ifndef OS_STACK_WATERMARK
#define OS_STACK_WATERMARK 0
#endif
// <o>Processor mode for Thread execution
// <0=> Unprivileged mode
// <1=> Privileged mode
// <i> Default: Privileged mode
#ifndef OS_PRIVILEGE_MODE
#define OS_PRIVILEGE_MODE 1
#endif
// </h>
// <h>Timer Configuration
// ======================
// <e>Object specific Memory allocation
// <i> Enables object specific memory allocation.
#ifndef OS_TIMER_OBJ_MEM
#define OS_TIMER_OBJ_MEM 0
#endif
// <o>Number of Timer objects <1-1000>
// <i> Defines maximum number of objects that can be active at the same time.
// <i> Applies to objects with system provided memory for control blocks.
#ifndef OS_TIMER_NUM
#define OS_TIMER_NUM 1
#endif
// </e>
// <o>Timer Thread Priority
// <8=> Low
// <16=> Below Normal <24=> Normal <32=> Above Normal
// <40=> High
// <48=> Realtime
// <i> Defines priority for timer thread
// <i> Default: High
#ifndef OS_TIMER_THREAD_PRIO
#define OS_TIMER_THREAD_PRIO 40
#endif
// <o>Timer Thread Stack size [bytes] <0-1073741824:8>
// <i> Defines stack size for Timer thread.
// <i> May be set to 0 when timers are not used.
// <i> Default: 512
#ifndef OS_TIMER_THREAD_STACK_SIZE
#define OS_TIMER_THREAD_STACK_SIZE 512
#endif
// <o>Timer Thread TrustZone Module Identifier
// <i> Defines TrustZone Thread Context Management Identifier.
// <i> Applies only to cores with TrustZone technology.
// <i> Default: 0 (not used)
#ifndef OS_TIMER_THREAD_TZ_MOD_ID
#define OS_TIMER_THREAD_TZ_MOD_ID 0
#endif
// <o>Timer Callback Queue entries <0-256>
// <i> Number of concurrent active timer callback functions.
// <i> May be set to 0 when timers are not used.
// <i> Default: 4
#ifndef OS_TIMER_CB_QUEUE
#define OS_TIMER_CB_QUEUE 4
#endif
// </h>
// <h>Event Flags Configuration
// ============================
// <e>Object specific Memory allocation
// <i> Enables object specific memory allocation.
#ifndef OS_EVFLAGS_OBJ_MEM
#define OS_EVFLAGS_OBJ_MEM 0
#endif
// <o>Number of Event Flags objects <1-1000>
// <i> Defines maximum number of objects that can be active at the same time.
// <i> Applies to objects with system provided memory for control blocks.
#ifndef OS_EVFLAGS_NUM
#define OS_EVFLAGS_NUM 1
#endif
// </e>
// </h>
// <h>Mutex Configuration
// ======================
// <e>Object specific Memory allocation
// <i> Enables object specific memory allocation.
#ifndef OS_MUTEX_OBJ_MEM
#define OS_MUTEX_OBJ_MEM 0
#endif
// <o>Number of Mutex objects <1-1000>
// <i> Defines maximum number of objects that can be active at the same time.
// <i> Applies to objects with system provided memory for control blocks.
#ifndef OS_MUTEX_NUM
#define OS_MUTEX_NUM 1
#endif
// </e>
// </h>
// <h>Semaphore Configuration
// ==========================
// <e>Object specific Memory allocation
// <i> Enables object specific memory allocation.
#ifndef OS_SEMAPHORE_OBJ_MEM
#define OS_SEMAPHORE_OBJ_MEM 0
#endif
// <o>Number of Semaphore objects <1-1000>
// <i> Defines maximum number of objects that can be active at the same time.
// <i> Applies to objects with system provided memory for control blocks.
#ifndef OS_SEMAPHORE_NUM
#define OS_SEMAPHORE_NUM 1
#endif
// </e>
// </h>
// <h>Memory Pool Configuration
// ============================
// <e>Object specific Memory allocation
// <i> Enables object specific memory allocation.
#ifndef OS_MEMPOOL_OBJ_MEM
#define OS_MEMPOOL_OBJ_MEM 0
#endif
// <o>Number of Memory Pool objects <1-1000>
// <i> Defines maximum number of objects that can be active at the same time.
// <i> Applies to objects with system provided memory for control blocks.
#ifndef OS_MEMPOOL_NUM
#define OS_MEMPOOL_NUM 1
#endif
// <o>Data Storage Memory size [bytes] <0-1073741824:8>
// <i> Defines the combined data storage memory size.
// <i> Applies to objects with system provided memory for data storage.
// <i> Default: 0
#ifndef OS_MEMPOOL_DATA_SIZE
#define OS_MEMPOOL_DATA_SIZE 0
#endif
// </e>
// </h>
// <h>Message Queue Configuration
// ==============================
// <e>Object specific Memory allocation
// <i> Enables object specific memory allocation.
#ifndef OS_MSGQUEUE_OBJ_MEM
#define OS_MSGQUEUE_OBJ_MEM 0
#endif
// <o>Number of Message Queue objects <1-1000>
// <i> Defines maximum number of objects that can be active at the same time.
// <i> Applies to objects with system provided memory for control blocks.
#ifndef OS_MSGQUEUE_NUM
#define OS_MSGQUEUE_NUM 1
#endif
// <o>Data Storage Memory size [bytes] <0-1073741824:8>
// <i> Defines the combined data storage memory size.
// <i> Applies to objects with system provided memory for data storage.
// <i> Default: 0
#ifndef OS_MSGQUEUE_DATA_SIZE
#define OS_MSGQUEUE_DATA_SIZE 0
#endif
// </e>
// </h>
// <h>Event Recorder Configuration
// ===============================
// <e>Global Initialization
// <i> Initialize Event Recorder during 'osKernelInitialize'.
#ifndef OS_EVR_INIT
#define OS_EVR_INIT 0
#endif
// <q>Start recording
// <i> Start event recording after initialization.
#ifndef OS_EVR_START
#define OS_EVR_START 1
#endif
// <h>Global Event Filter Setup
// <i> Initial recording level applied to all components.
// <o.0>Error events
// <o.1>API function call events
// <o.2>Operation events
// <o.3>Detailed operation events
// </h>
#ifndef OS_EVR_LEVEL
#define OS_EVR_LEVEL 0x00U
#endif
// <h>RTOS Event Filter Setup
// <i> Recording levels for RTX components.
// <i> Only applicable if events for the respective component are generated.
// <e.7>Memory Management
// <i> Recording level for Memory Management events.
// <o.0>Error events
// <o.1>API function call events
// <o.2>Operation events
// <o.3>Detailed operation events
// </e>
#ifndef OS_EVR_MEMORY_LEVEL
#define OS_EVR_MEMORY_LEVEL 0x81U
#endif
// <e.7>Kernel
// <i> Recording level for Kernel events.
// <o.0>Error events
// <o.1>API function call events
// <o.2>Operation events
// <o.3>Detailed operation events
// </e>
#ifndef OS_EVR_KERNEL_LEVEL
#define OS_EVR_KERNEL_LEVEL 0x81U
#endif
// <e.7>Thread
// <i> Recording level for Thread events.
// <o.0>Error events
// <o.1>API function call events
// <o.2>Operation events
// <o.3>Detailed operation events
// </e>
#ifndef OS_EVR_THREAD_LEVEL
#define OS_EVR_THREAD_LEVEL 0x85U
#endif
// <e.7>Generic Wait
// <i> Recording level for Generic Wait events.
// <o.0>Error events
// <o.1>API function call events
// <o.2>Operation events
// <o.3>Detailed operation events
// </e>
#ifndef OS_EVR_WAIT_LEVEL
#define OS_EVR_WAIT_LEVEL 0x81U
#endif
// <e.7>Thread Flags
// <i> Recording level for Thread Flags events.
// <o.0>Error events
// <o.1>API function call events
// <o.2>Operation events
// <o.3>Detailed operation events
// </e>
#ifndef OS_EVR_THFLAGS_LEVEL
#define OS_EVR_THFLAGS_LEVEL 0x81U
#endif
// <e.7>Event Flags
// <i> Recording level for Event Flags events.
// <o.0>Error events
// <o.1>API function call events
// <o.2>Operation events
// <o.3>Detailed operation events
// </e>
#ifndef OS_EVR_EVFLAGS_LEVEL
#define OS_EVR_EVFLAGS_LEVEL 0x81U
#endif
// <e.7>Timer
// <i> Recording level for Timer events.
// <o.0>Error events
// <o.1>API function call events
// <o.2>Operation events
// <o.3>Detailed operation events
// </e>
#ifndef OS_EVR_TIMER_LEVEL
#define OS_EVR_TIMER_LEVEL 0x81U
#endif
// <e.7>Mutex
// <i> Recording level for Mutex events.
// <o.0>Error events
// <o.1>API function call events
// <o.2>Operation events
// <o.3>Detailed operation events
// </e>
#ifndef OS_EVR_MUTEX_LEVEL
#define OS_EVR_MUTEX_LEVEL 0x81U
#endif
// <e.7>Semaphore
// <i> Recording level for Semaphore events.
// <o.0>Error events
// <o.1>API function call events
// <o.2>Operation events
// <o.3>Detailed operation events
// </e>
#ifndef OS_EVR_SEMAPHORE_LEVEL
#define OS_EVR_SEMAPHORE_LEVEL 0x81U
#endif
// <e.7>Memory Pool
// <i> Recording level for Memory Pool events.
// <o.0>Error events
// <o.1>API function call events
// <o.2>Operation events
// <o.3>Detailed operation events
// </e>
#ifndef OS_EVR_MEMPOOL_LEVEL
#define OS_EVR_MEMPOOL_LEVEL 0x81U
#endif
// <e.7>Message Queue
// <i> Recording level for Message Queue events.
// <o.0>Error events
// <o.1>API function call events
// <o.2>Operation events
// <o.3>Detailed operation events
// </e>
#ifndef OS_EVR_MSGQUEUE_LEVEL
#define OS_EVR_MSGQUEUE_LEVEL 0x81U
#endif
// </h>
// </e>
// <h>RTOS Event Generation
// <i> Enables event generation for RTX components (requires RTX source variant).
// <q>Memory Management
// <i> Enables Memory Management event generation.
#ifndef OS_EVR_MEMORY
#define OS_EVR_MEMORY 1
#endif
// <q>Kernel
// <i> Enables Kernel event generation.
#ifndef OS_EVR_KERNEL
#define OS_EVR_KERNEL 1
#endif
// <q>Thread
// <i> Enables Thread event generation.
#ifndef OS_EVR_THREAD
#define OS_EVR_THREAD 1
#endif
// <q>Generic Wait
// <i> Enables Generic Wait event generation.
#ifndef OS_EVR_WAIT
#define OS_EVR_WAIT 1
#endif
// <q>Thread Flags
// <i> Enables Thread Flags event generation.
#ifndef OS_EVR_THFLAGS
#define OS_EVR_THFLAGS 1
#endif
// <q>Event Flags
// <i> Enables Event Flags event generation.
#ifndef OS_EVR_EVFLAGS
#define OS_EVR_EVFLAGS 1
#endif
// <q>Timer
// <i> Enables Timer event generation.
#ifndef OS_EVR_TIMER
#define OS_EVR_TIMER 1
#endif
// <q>Mutex
// <i> Enables Mutex event generation.
#ifndef OS_EVR_MUTEX
#define OS_EVR_MUTEX 1
#endif
// <q>Semaphore
// <i> Enables Semaphore event generation.
#ifndef OS_EVR_SEMAPHORE
#define OS_EVR_SEMAPHORE 1
#endif
// <q>Memory Pool
// <i> Enables Memory Pool event generation.
#ifndef OS_EVR_MEMPOOL
#define OS_EVR_MEMPOOL 1
#endif
// <q>Message Queue
// <i> Enables Message Queue event generation.
#ifndef OS_EVR_MSGQUEUE
#define OS_EVR_MSGQUEUE 1
#endif
// </h>
// </h>
// Number of Threads which use standard C/C++ library libspace
// (when thread specific memory allocation is not used).
#if (OS_THREAD_OBJ_MEM == 0)
#ifndef OS_THREAD_LIBSPACE_NUM
#define OS_THREAD_LIBSPACE_NUM 4
#endif
#else
#define OS_THREAD_LIBSPACE_NUM OS_THREAD_NUM
#endif
//------------- <<< end of configuration section >>> ---------------------------
#endif // RTX_CONFIG_H_

34
RTE/Compiler/EventRecorderConf.h Normal file
View File

@ -0,0 +1,34 @@
/*------------------------------------------------------------------------------
* MDK - Component ::Event Recorder
* Copyright (c) 2016-2018 ARM Germany GmbH. All rights reserved.
*------------------------------------------------------------------------------
* Name: EventRecorderConf.h
* Purpose: Event Recorder Configuration
* Rev.: V1.1.0
*----------------------------------------------------------------------------*/
//-------- <<< Use Configuration Wizard in Context Menu >>> --------------------
// <h>Event Recorder
// <o>Number of Records
// <8=>8 <16=>16 <32=>32 <64=>64 <128=>128 <256=>256 <512=>512 <1024=>1024
// <2048=>2048 <4096=>4096 <8192=>8192 <16384=>16384 <32768=>32768
// <65536=>65536
// <i>Configures size of Event Record Buffer (each record is 16 bytes)
// <i>Must be 2^n (min=8, max=65536)
#define EVENT_RECORD_COUNT 1024U
// <o>Time Stamp Source
// <0=> DWT Cycle Counter <1=> SysTick <2=> CMSIS-RTOS2 System Timer
// <3=> User Timer (Normal Reset) <4=> User Timer (Power-On Reset)
// <i>Selects source for 32-bit time stamp
#define EVENT_TIMESTAMP_SOURCE 0
// <o>Time Stamp Clock Frequency [Hz] <0-1000000000>
// <i>Defines initial time stamp clock frequency (0 when not used)
#define EVENT_TIMESTAMP_FREQ 0U
// </h>
//------------- <<< end of configuration section >>> ---------------------------

3261
RTE/Device/STM32F746NGHx/RTE_Device.h Normal file
View File

File diff suppressed because it is too large Load Diff

483
RTE/Device/STM32F746NGHx/startup_stm32f746xx.s Normal file
View File

@ -0,0 +1,483 @@
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f746xx.s
;* Author : MCD Application Team
;* Description : STM32F746xx devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM7 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;* <<< Use Configuration Wizard in Context Menu >>>
;*******************************************************************************
;
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x00000400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x00000200
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window WatchDog
DCD PVD_IRQHandler ; PVD through EXTI Line detection
DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_IRQHandler ; RCC
DCD EXTI0_IRQHandler ; EXTI Line0
DCD EXTI1_IRQHandler ; EXTI Line1
DCD EXTI2_IRQHandler ; EXTI Line2
DCD EXTI3_IRQHandler ; EXTI Line3
DCD EXTI4_IRQHandler ; EXTI Line4
DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0
DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1
DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2
DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3
DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4
DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5
DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6
DCD ADC_IRQHandler ; ADC1, ADC2 and ADC3s
DCD CAN1_TX_IRQHandler ; CAN1 TX
DCD CAN1_RX0_IRQHandler ; CAN1 RX0
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
DCD EXTI9_5_IRQHandler ; External Line[9:5]s
DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9
DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10
DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM4_IRQHandler ; TIM4
DCD I2C1_EV_IRQHandler ; I2C1 Event
DCD I2C1_ER_IRQHandler ; I2C1 Error
DCD I2C2_EV_IRQHandler ; I2C2 Event
DCD I2C2_ER_IRQHandler ; I2C2 Error
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_IRQHandler ; USART3
DCD EXTI15_10_IRQHandler ; External Line[15:10]s
DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line
DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break and TIM12
DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update and TIM13
DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation and TIM14
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare
DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7
DCD FMC_IRQHandler ; FMC
DCD SDMMC1_IRQHandler ; SDMMC1
DCD TIM5_IRQHandler ; TIM5
DCD SPI3_IRQHandler ; SPI3
DCD UART4_IRQHandler ; UART4
DCD UART5_IRQHandler ; UART5
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
DCD TIM7_IRQHandler ; TIM7
DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0
DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1
DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2
DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3
DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4
DCD ETH_IRQHandler ; Ethernet
DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line
DCD CAN2_TX_IRQHandler ; CAN2 TX
DCD CAN2_RX0_IRQHandler ; CAN2 RX0
DCD CAN2_RX1_IRQHandler ; CAN2 RX1
DCD CAN2_SCE_IRQHandler ; CAN2 SCE
DCD OTG_FS_IRQHandler ; USB OTG FS
DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5
DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6
DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7
DCD USART6_IRQHandler ; USART6
DCD I2C3_EV_IRQHandler ; I2C3 event
DCD I2C3_ER_IRQHandler ; I2C3 error
DCD OTG_HS_EP1_OUT_IRQHandler ; USB OTG HS End Point 1 Out
DCD OTG_HS_EP1_IN_IRQHandler ; USB OTG HS End Point 1 In
DCD OTG_HS_WKUP_IRQHandler ; USB OTG HS Wakeup through EXTI
DCD OTG_HS_IRQHandler ; USB OTG HS
DCD DCMI_IRQHandler ; DCMI
DCD 0 ; Reserved
DCD RNG_IRQHandler ; Rng
DCD FPU_IRQHandler ; FPU
DCD UART7_IRQHandler ; UART7
DCD UART8_IRQHandler ; UART8
DCD SPI4_IRQHandler ; SPI4
DCD SPI5_IRQHandler ; SPI5
DCD SPI6_IRQHandler ; SPI6
DCD SAI1_IRQHandler ; SAI1
DCD LTDC_IRQHandler ; LTDC
DCD LTDC_ER_IRQHandler ; LTDC error
DCD DMA2D_IRQHandler ; DMA2D
DCD SAI2_IRQHandler ; SAI2
DCD QUADSPI_IRQHandler ; QUADSPI
DCD LPTIM1_IRQHandler ; LPTIM1
DCD CEC_IRQHandler ; HDMI_CEC
DCD I2C4_EV_IRQHandler ; I2C4 Event
DCD I2C4_ER_IRQHandler ; I2C4 Error
DCD SPDIF_RX_IRQHandler ; SPDIF_RX
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT SystemInit
IMPORT __main
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
MemManage_Handler\
PROC
EXPORT MemManage_Handler [WEAK]
B .
ENDP
BusFault_Handler\
PROC
EXPORT BusFault_Handler [WEAK]
B .
ENDP
UsageFault_Handler\
PROC
EXPORT UsageFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
DebugMon_Handler\
PROC
EXPORT DebugMon_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_IRQHandler [WEAK]
EXPORT TAMP_STAMP_IRQHandler [WEAK]
EXPORT RTC_WKUP_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_IRQHandler [WEAK]
EXPORT EXTI0_IRQHandler [WEAK]
EXPORT EXTI1_IRQHandler [WEAK]
EXPORT EXTI2_IRQHandler [WEAK]
EXPORT EXTI3_IRQHandler [WEAK]
EXPORT EXTI4_IRQHandler [WEAK]
EXPORT DMA1_Stream0_IRQHandler [WEAK]
EXPORT DMA1_Stream1_IRQHandler [WEAK]
EXPORT DMA1_Stream2_IRQHandler [WEAK]
EXPORT DMA1_Stream3_IRQHandler [WEAK]
EXPORT DMA1_Stream4_IRQHandler [WEAK]
EXPORT DMA1_Stream5_IRQHandler [WEAK]
EXPORT DMA1_Stream6_IRQHandler [WEAK]
EXPORT ADC_IRQHandler [WEAK]
EXPORT CAN1_TX_IRQHandler [WEAK]
EXPORT CAN1_RX0_IRQHandler [WEAK]
EXPORT CAN1_RX1_IRQHandler [WEAK]
EXPORT CAN1_SCE_IRQHandler [WEAK]
EXPORT EXTI9_5_IRQHandler [WEAK]
EXPORT TIM1_BRK_TIM9_IRQHandler [WEAK]
EXPORT TIM1_UP_TIM10_IRQHandler [WEAK]
EXPORT TIM1_TRG_COM_TIM11_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM4_IRQHandler [WEAK]
EXPORT I2C1_EV_IRQHandler [WEAK]
EXPORT I2C1_ER_IRQHandler [WEAK]
EXPORT I2C2_EV_IRQHandler [WEAK]
EXPORT I2C2_ER_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_IRQHandler [WEAK]
EXPORT EXTI15_10_IRQHandler [WEAK]
EXPORT RTC_Alarm_IRQHandler [WEAK]
EXPORT OTG_FS_WKUP_IRQHandler [WEAK]
EXPORT TIM8_BRK_TIM12_IRQHandler [WEAK]
EXPORT TIM8_UP_TIM13_IRQHandler [WEAK]
EXPORT TIM8_TRG_COM_TIM14_IRQHandler [WEAK]
EXPORT TIM8_CC_IRQHandler [WEAK]
EXPORT DMA1_Stream7_IRQHandler [WEAK]
EXPORT FMC_IRQHandler [WEAK]
EXPORT SDMMC1_IRQHandler [WEAK]
EXPORT TIM5_IRQHandler [WEAK]
EXPORT SPI3_IRQHandler [WEAK]
EXPORT UART4_IRQHandler [WEAK]
EXPORT UART5_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT DMA2_Stream0_IRQHandler [WEAK]
EXPORT DMA2_Stream1_IRQHandler [WEAK]
EXPORT DMA2_Stream2_IRQHandler [WEAK]
EXPORT DMA2_Stream3_IRQHandler [WEAK]
EXPORT DMA2_Stream4_IRQHandler [WEAK]
EXPORT ETH_IRQHandler [WEAK]
EXPORT ETH_WKUP_IRQHandler [WEAK]
EXPORT CAN2_TX_IRQHandler [WEAK]
EXPORT CAN2_RX0_IRQHandler [WEAK]
EXPORT CAN2_RX1_IRQHandler [WEAK]
EXPORT CAN2_SCE_IRQHandler [WEAK]
EXPORT OTG_FS_IRQHandler [WEAK]
EXPORT DMA2_Stream5_IRQHandler [WEAK]
EXPORT DMA2_Stream6_IRQHandler [WEAK]
EXPORT DMA2_Stream7_IRQHandler [WEAK]
EXPORT USART6_IRQHandler [WEAK]
EXPORT I2C3_EV_IRQHandler [WEAK]
EXPORT I2C3_ER_IRQHandler [WEAK]
EXPORT OTG_HS_EP1_OUT_IRQHandler [WEAK]
EXPORT OTG_HS_EP1_IN_IRQHandler [WEAK]
EXPORT OTG_HS_WKUP_IRQHandler [WEAK]
EXPORT OTG_HS_IRQHandler [WEAK]
EXPORT DCMI_IRQHandler [WEAK]
EXPORT RNG_IRQHandler [WEAK]
EXPORT FPU_IRQHandler [WEAK]
EXPORT UART7_IRQHandler [WEAK]
EXPORT UART8_IRQHandler [WEAK]
EXPORT SPI4_IRQHandler [WEAK]
EXPORT SPI5_IRQHandler [WEAK]
EXPORT SPI6_IRQHandler [WEAK]
EXPORT SAI1_IRQHandler [WEAK]
EXPORT LTDC_IRQHandler [WEAK]
EXPORT LTDC_ER_IRQHandler [WEAK]
EXPORT DMA2D_IRQHandler [WEAK]
EXPORT SAI2_IRQHandler [WEAK]
EXPORT QUADSPI_IRQHandler [WEAK]
EXPORT LPTIM1_IRQHandler [WEAK]
EXPORT CEC_IRQHandler [WEAK]
EXPORT I2C4_EV_IRQHandler [WEAK]
EXPORT I2C4_ER_IRQHandler [WEAK]
EXPORT SPDIF_RX_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_IRQHandler
TAMP_STAMP_IRQHandler
RTC_WKUP_IRQHandler
FLASH_IRQHandler
RCC_IRQHandler
EXTI0_IRQHandler
EXTI1_IRQHandler
EXTI2_IRQHandler
EXTI3_IRQHandler
EXTI4_IRQHandler
DMA1_Stream0_IRQHandler
DMA1_Stream1_IRQHandler
DMA1_Stream2_IRQHandler
DMA1_Stream3_IRQHandler
DMA1_Stream4_IRQHandler
DMA1_Stream5_IRQHandler
DMA1_Stream6_IRQHandler
ADC_IRQHandler
CAN1_TX_IRQHandler
CAN1_RX0_IRQHandler
CAN1_RX1_IRQHandler
CAN1_SCE_IRQHandler
EXTI9_5_IRQHandler
TIM1_BRK_TIM9_IRQHandler
TIM1_UP_TIM10_IRQHandler
TIM1_TRG_COM_TIM11_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM4_IRQHandler
I2C1_EV_IRQHandler
I2C1_ER_IRQHandler
I2C2_EV_IRQHandler
I2C2_ER_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_IRQHandler
EXTI15_10_IRQHandler
RTC_Alarm_IRQHandler
OTG_FS_WKUP_IRQHandler
TIM8_BRK_TIM12_IRQHandler
TIM8_UP_TIM13_IRQHandler
TIM8_TRG_COM_TIM14_IRQHandler
TIM8_CC_IRQHandler
DMA1_Stream7_IRQHandler
FMC_IRQHandler
SDMMC1_IRQHandler
TIM5_IRQHandler
SPI3_IRQHandler
UART4_IRQHandler
UART5_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
DMA2_Stream0_IRQHandler
DMA2_Stream1_IRQHandler
DMA2_Stream2_IRQHandler
DMA2_Stream3_IRQHandler
DMA2_Stream4_IRQHandler
ETH_IRQHandler
ETH_WKUP_IRQHandler
CAN2_TX_IRQHandler
CAN2_RX0_IRQHandler
CAN2_RX1_IRQHandler
CAN2_SCE_IRQHandler
OTG_FS_IRQHandler
DMA2_Stream5_IRQHandler
DMA2_Stream6_IRQHandler
DMA2_Stream7_IRQHandler
USART6_IRQHandler
I2C3_EV_IRQHandler
I2C3_ER_IRQHandler
OTG_HS_EP1_OUT_IRQHandler
OTG_HS_EP1_IN_IRQHandler
OTG_HS_WKUP_IRQHandler
OTG_HS_IRQHandler
DCMI_IRQHandler
RNG_IRQHandler
FPU_IRQHandler
UART7_IRQHandler
UART8_IRQHandler
SPI4_IRQHandler
SPI5_IRQHandler
SPI6_IRQHandler
SAI1_IRQHandler
LTDC_IRQHandler
LTDC_ER_IRQHandler
DMA2D_IRQHandler
SAI2_IRQHandler
QUADSPI_IRQHandler
LPTIM1_IRQHandler
CEC_IRQHandler
I2C4_EV_IRQHandler
I2C4_ER_IRQHandler
SPDIF_RX_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

596
RTE/Device/STM32F746NGHx/stm32f7xx_hal_conf.h Normal file
View File

@ -0,0 +1,596 @@
/**
******************************************************************************
* @file stm32f7xx_hal_conf.h
* @author MCD Application Team
* @brief HAL configuration file
*
* @note modified by ARM
* The modifications allow to use this file as User Code Template
* within the Device Family Pack.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F7xx_HAL_CONF_H
#define __STM32F7xx_HAL_CONF_H
#ifdef _RTE_
#include "RTE_Components.h" // Component selection
#endif
#ifdef __cplusplus
extern "C" {
#endif
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* ########################## Module Selection ############################## */
/**
* @brief This is the list of modules to be used in the HAL driver
*/
#ifdef RTE_DEVICE_HAL_COMMON
#define HAL_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_ADC
#define HAL_ADC_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_CAN
#define HAL_CAN_MODULE_ENABLED
/* #define HAL_CAN_LEGACY_MODULE_ENABLED */
#endif
#ifdef RTE_DEVICE_HAL_CEC
#define HAL_CEC_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_CRC
#define HAL_CRC_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_CRYP
#define HAL_CRYP_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_DAC
#define HAL_DAC_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_DCMI
#define HAL_DCMI_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_DMA
#define HAL_DMA_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_DMA2D
#define HAL_DMA2D_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_ETH
#define HAL_ETH_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_EXTI
#define HAL_EXTI_MODULE_ENABLED
#endif
#if defined (RTE_DEVICE_HAL_FLASH) || defined (RTE_DEVICE_HAL_COMMON)
#define HAL_FLASH_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_NAND
#define HAL_NAND_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_NOR
#define HAL_NOR_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_SRAM
#define HAL_SRAM_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_SDRAM
#define HAL_SDRAM_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_HASH
#define HAL_HASH_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_GPIO
#define HAL_GPIO_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_I2C
#define HAL_I2C_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_I2S
#define HAL_I2S_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_IWDG
#define HAL_IWDG_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_LPTIM
#define HAL_LPTIM_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_LTDC
#define HAL_LTDC_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_PWR
#define HAL_PWR_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_QSPI
#define HAL_QSPI_MODULE_ENABLED
#endif
#if defined RTE_DEVICE_HAL_RCC
#define HAL_RCC_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_RNG
#define HAL_RNG_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_RTC
#define HAL_RTC_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_SAI
#define HAL_SAI_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_SD
#define HAL_SD_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_SPDIFRX
#define HAL_SPDIFRX_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_SPI
#define HAL_SPI_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_TIM
#define HAL_TIM_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_UART
#define HAL_UART_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_USART
#define HAL_USART_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_IRDA
#define HAL_IRDA_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_SMARTCARD
#define HAL_SMARTCARD_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_WWDG
#define HAL_WWDG_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_CORTEX
#define HAL_CORTEX_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_PCD
#define HAL_PCD_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_HCD
#define HAL_HCD_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_DFSDM
#define HAL_DFSDM_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_DSI
#define HAL_DSI_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_JPEG
#define HAL_JPEG_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_MDIOS
#define HAL_MDIOS_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_SMBUS
#define HAL_SMBUS_MODULE_ENABLED
#endif
#ifdef RTE_DEVICE_HAL_MMC
#define HAL_MMC_MODULE_ENABLED
#endif
/* ########################## HSE/HSI Values adaptation ##################### */
/**
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
* This value is used by the RCC HAL module to compute the system frequency
* (when HSE is used as system clock source, directly or through the PLL).
*/
#if !defined (HSE_VALUE)
#define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */
#endif /* HSE_VALUE */
#if !defined (HSE_STARTUP_TIMEOUT)
#define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */
#endif /* HSE_STARTUP_TIMEOUT */
/**
* @brief Internal High Speed oscillator (HSI) value.
* This value is used by the RCC HAL module to compute the system frequency
* (when HSI is used as system clock source, directly or through the PLL).
*/
#if !defined (HSI_VALUE)
#define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
#endif /* HSI_VALUE */
/**
* @brief Internal Low Speed oscillator (LSI) value.
*/
#if !defined (LSI_VALUE)
#define LSI_VALUE ((uint32_t)32000) /*!< LSI Typical Value in Hz*/
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
The real value may vary depending on the variations
in voltage and temperature. */
/**
* @brief External Low Speed oscillator (LSE) value.
*/
#if !defined (LSE_VALUE)
#define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */
#endif /* LSE_VALUE */
#if !defined (LSE_STARTUP_TIMEOUT)
#define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */
#endif /* LSE_STARTUP_TIMEOUT */
/**
* @brief External clock source for I2S peripheral
* This value is used by the I2S HAL module to compute the I2S clock source
* frequency, this source is inserted directly through I2S_CKIN pad.
*/
#if !defined (EXTERNAL_CLOCK_VALUE)
#define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000) /*!< Value of the Internal oscillator in Hz*/
#endif /* EXTERNAL_CLOCK_VALUE */
/* Tip: To avoid modifying this file each time you need to use different HSE,
=== you can define the HSE value in your toolchain compiler preprocessor. */
/* ########################### System Configuration ######################### */
/**
* @brief This is the HAL system configuration section
*/
#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */
#define TICK_INT_PRIORITY ((uint32_t)0x0FU) /*!< tick interrupt priority */
#define USE_RTOS 0U
#define PREFETCH_ENABLE 1U
#define ART_ACCLERATOR_ENABLE 1U /* To enable instruction cache and prefetch */
#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */
#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */
#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */
#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */
#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */
#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */
#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */
#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */
#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */
#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */
#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */
#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */
#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */
#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */
#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */
#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */
#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */
#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */
#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIOS register callback disabled */
#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */
#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */
#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */
#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */
#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */
#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */
#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */
#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */
#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */
#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */
#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */
#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */
#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */
#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */
#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */
#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */
#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */
#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */
/* ########################## Assert Selection ############################## */
/**
* @brief Uncomment the line below to expanse the "assert_param" macro in the
* HAL drivers code
*/
/* #define USE_FULL_ASSERT 1 */
/* ################## Ethernet peripheral configuration ##################### */
/* Section 1 : Ethernet peripheral configuration */
/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
#define MAC_ADDR0 2U
#define MAC_ADDR1 0U
#define MAC_ADDR2 0U
#define MAC_ADDR3 0U
#define MAC_ADDR4 0U
#define MAC_ADDR5 0U
/* Definition of the Ethernet driver buffers size and count */
#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
#define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
#define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
/* Section 2: PHY configuration section */
/* DP83848 PHY Address*/
#define DP83848_PHY_ADDRESS 0x01U
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
#define PHY_RESET_DELAY ((uint32_t)0x000000FFU)
/* PHY Configuration delay */
#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU)
#define PHY_READ_TO ((uint32_t)0x0000FFFFU)
#define PHY_WRITE_TO ((uint32_t)0x0000FFFFU)
/* Section 3: Common PHY Registers */
#define PHY_BCR ((uint16_t)0x00U) /*!< Transceiver Basic Control Register */
#define PHY_BSR ((uint16_t)0x01U) /*!< Transceiver Basic Status Register */
#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */
#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */
#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */
#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */
#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */
#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */
#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */
#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */
#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */
#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */
#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */
#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */
#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */
/* Section 4: Extended PHY Registers */
#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */
#define PHY_MICR ((uint16_t)0x11U) /*!< MII Interrupt Control Register */
#define PHY_MISR ((uint16_t)0x12U) /*!< MII Interrupt Status and Misc. Control Register */
#define PHY_LINK_STATUS ((uint16_t)0x0001U) /*!< PHY Link mask */
#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */
#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */
#define PHY_MICR_INT_EN ((uint16_t)0x0002U) /*!< PHY Enable interrupts */
#define PHY_MICR_INT_OE ((uint16_t)0x0001U) /*!< PHY Enable output interrupt events */
#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020U) /*!< Enable Interrupt on change of link status */
#define PHY_LINK_INTERRUPT ((uint16_t)0x2000U) /*!< PHY link status interrupt mask */
/* ################## SPI peripheral configuration ########################## */
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
* Activated: CRC code is present inside driver
* Deactivated: CRC code cleaned from driver
*/
#define USE_SPI_CRC 1U
/* Includes ------------------------------------------------------------------*/
/**
* @brief Include module's header file
*/
#ifdef HAL_RCC_MODULE_ENABLED
#include "stm32f7xx_hal_rcc.h"
#endif /* HAL_RCC_MODULE_ENABLED */
#ifdef HAL_EXTI_MODULE_ENABLED
#include "stm32f7xx_hal_exti.h"
#endif /* HAL_EXTI_MODULE_ENABLED */
#ifdef HAL_GPIO_MODULE_ENABLED
#include "stm32f7xx_hal_gpio.h"
#endif /* HAL_GPIO_MODULE_ENABLED */
#ifdef HAL_DMA_MODULE_ENABLED
#include "stm32f7xx_hal_dma.h"
#endif /* HAL_DMA_MODULE_ENABLED */
#ifdef HAL_CORTEX_MODULE_ENABLED
#include "stm32f7xx_hal_cortex.h"
#endif /* HAL_CORTEX_MODULE_ENABLED */
#ifdef HAL_ADC_MODULE_ENABLED
#include "stm32f7xx_hal_adc.h"
#endif /* HAL_ADC_MODULE_ENABLED */
#ifdef HAL_CAN_MODULE_ENABLED
#include "stm32f7xx_hal_can.h"
#endif /* HAL_CAN_MODULE_ENABLED */
#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
#include "stm32f7xx_hal_can_legacy.h"
#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
#ifdef HAL_CEC_MODULE_ENABLED
#include "stm32f7xx_hal_cec.h"
#endif /* HAL_CEC_MODULE_ENABLED */
#ifdef HAL_CRC_MODULE_ENABLED
#include "stm32f7xx_hal_crc.h"
#endif /* HAL_CRC_MODULE_ENABLED */
#ifdef HAL_CRYP_MODULE_ENABLED
#include "stm32f7xx_hal_cryp.h"
#endif /* HAL_CRYP_MODULE_ENABLED */
#ifdef HAL_DMA2D_MODULE_ENABLED
#include "stm32f7xx_hal_dma2d.h"
#endif /* HAL_DMA2D_MODULE_ENABLED */
#ifdef HAL_DAC_MODULE_ENABLED
#include "stm32f7xx_hal_dac.h"
#endif /* HAL_DAC_MODULE_ENABLED */
#ifdef HAL_DCMI_MODULE_ENABLED
#include "stm32f7xx_hal_dcmi.h"
#endif /* HAL_DCMI_MODULE_ENABLED */
#ifdef HAL_ETH_MODULE_ENABLED
#include "stm32f7xx_hal_eth.h"
#endif /* HAL_ETH_MODULE_ENABLED */
#ifdef HAL_FLASH_MODULE_ENABLED
#include "stm32f7xx_hal_flash.h"
#endif /* HAL_FLASH_MODULE_ENABLED */
#ifdef HAL_SRAM_MODULE_ENABLED
#include "stm32f7xx_hal_sram.h"
#endif /* HAL_SRAM_MODULE_ENABLED */
#ifdef HAL_NOR_MODULE_ENABLED
#include "stm32f7xx_hal_nor.h"
#endif /* HAL_NOR_MODULE_ENABLED */
#ifdef HAL_NAND_MODULE_ENABLED
#include "stm32f7xx_hal_nand.h"
#endif /* HAL_NAND_MODULE_ENABLED */
#ifdef HAL_SDRAM_MODULE_ENABLED
#include "stm32f7xx_hal_sdram.h"
#endif /* HAL_SDRAM_MODULE_ENABLED */
#ifdef HAL_HASH_MODULE_ENABLED
#include "stm32f7xx_hal_hash.h"
#endif /* HAL_HASH_MODULE_ENABLED */
#ifdef HAL_I2C_MODULE_ENABLED
#include "stm32f7xx_hal_i2c.h"
#endif /* HAL_I2C_MODULE_ENABLED */
#ifdef HAL_I2S_MODULE_ENABLED
#include "stm32f7xx_hal_i2s.h"
#endif /* HAL_I2S_MODULE_ENABLED */
#ifdef HAL_IWDG_MODULE_ENABLED
#include "stm32f7xx_hal_iwdg.h"
#endif /* HAL_IWDG_MODULE_ENABLED */
#ifdef HAL_LPTIM_MODULE_ENABLED
#include "stm32f7xx_hal_lptim.h"
#endif /* HAL_LPTIM_MODULE_ENABLED */
#ifdef HAL_LTDC_MODULE_ENABLED
#include "stm32f7xx_hal_ltdc.h"
#endif /* HAL_LTDC_MODULE_ENABLED */
#ifdef HAL_PWR_MODULE_ENABLED
#include "stm32f7xx_hal_pwr.h"
#endif /* HAL_PWR_MODULE_ENABLED */
#ifdef HAL_QSPI_MODULE_ENABLED
#include "stm32f7xx_hal_qspi.h"
#endif /* HAL_QSPI_MODULE_ENABLED */
#ifdef HAL_RNG_MODULE_ENABLED
#include "stm32f7xx_hal_rng.h"
#endif /* HAL_RNG_MODULE_ENABLED */
#ifdef HAL_RTC_MODULE_ENABLED
#include "stm32f7xx_hal_rtc.h"
#endif /* HAL_RTC_MODULE_ENABLED */
#ifdef HAL_SAI_MODULE_ENABLED
#include "stm32f7xx_hal_sai.h"
#endif /* HAL_SAI_MODULE_ENABLED */
#ifdef HAL_SD_MODULE_ENABLED
#include "stm32f7xx_hal_sd.h"
#endif /* HAL_SD_MODULE_ENABLED */
#ifdef HAL_SPDIFRX_MODULE_ENABLED
#include "stm32f7xx_hal_spdifrx.h"
#endif /* HAL_SPDIFRX_MODULE_ENABLED */
#ifdef HAL_SPI_MODULE_ENABLED
#include "stm32f7xx_hal_spi.h"
#endif /* HAL_SPI_MODULE_ENABLED */
#ifdef HAL_TIM_MODULE_ENABLED
#include "stm32f7xx_hal_tim.h"
#endif /* HAL_TIM_MODULE_ENABLED */
#ifdef HAL_UART_MODULE_ENABLED
#include "stm32f7xx_hal_uart.h"
#endif /* HAL_UART_MODULE_ENABLED */
#ifdef HAL_USART_MODULE_ENABLED
#include "stm32f7xx_hal_usart.h"
#endif /* HAL_USART_MODULE_ENABLED */
#ifdef HAL_IRDA_MODULE_ENABLED
#include "stm32f7xx_hal_irda.h"
#endif /* HAL_IRDA_MODULE_ENABLED */
#ifdef HAL_SMARTCARD_MODULE_ENABLED
#include "stm32f7xx_hal_smartcard.h"
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
#ifdef HAL_WWDG_MODULE_ENABLED
#include "stm32f7xx_hal_wwdg.h"
#endif /* HAL_WWDG_MODULE_ENABLED */
#ifdef HAL_PCD_MODULE_ENABLED
#include "stm32f7xx_hal_pcd.h"
#endif /* HAL_PCD_MODULE_ENABLED */
#ifdef HAL_HCD_MODULE_ENABLED
#include "stm32f7xx_hal_hcd.h"
#endif /* HAL_HCD_MODULE_ENABLED */
#ifdef HAL_DFSDM_MODULE_ENABLED
#include "stm32f7xx_hal_dfsdm.h"
#endif /* HAL_DFSDM_MODULE_ENABLED */
#ifdef HAL_DSI_MODULE_ENABLED
#include "stm32f7xx_hal_dsi.h"
#endif /* HAL_DSI_MODULE_ENABLED */
#ifdef HAL_JPEG_MODULE_ENABLED
#include "stm32f7xx_hal_jpeg.h"
#endif /* HAL_JPEG_MODULE_ENABLED */
#ifdef HAL_MDIOS_MODULE_ENABLED
#include "stm32f7xx_hal_mdios.h"
#endif /* HAL_MDIOS_MODULE_ENABLED */
#ifdef HAL_SMBUS_MODULE_ENABLED
#include "stm32f7xx_hal_smbus.h"
#endif /* HAL_SMBUS_MODULE_ENABLED */
#ifdef HAL_MMC_MODULE_ENABLED
#include "stm32f7xx_hal_mmc.h"
#endif /* HAL_MMC_MODULE_ENABLED */
/* Exported macro ------------------------------------------------------------*/
#ifdef USE_FULL_ASSERT
/**
* @brief The assert_param macro is used for function's parameters check.
* @param expr: If expr is false, it calls assert_failed function
* which reports the name of the source file and the source
* line number of the call that failed.
* If expr is true, it returns no value.
* @retval None
*/
#define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
/* Exported functions ------------------------------------------------------- */
void assert_failed(uint8_t* file, uint32_t line);
#else
#define assert_param(expr) ((void)0U)
#endif /* USE_FULL_ASSERT */
#ifdef __cplusplus
}
#endif
#endif /* __STM32F7xx_HAL_CONF_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

278
RTE/Device/STM32F746NGHx/system_stm32f7xx.c Normal file
View File

@ -0,0 +1,278 @@
/**
******************************************************************************
* @file system_stm32f7xx.c
* @author MCD Application Team
* @brief CMSIS Cortex-M7 Device Peripheral Access Layer System Source File.
*
* This file provides two functions and one global variable to be called from
* user application:
* - SystemInit(): This function is called at startup just after reset and
* before branch to main program. This call is made inside
* the "startup_stm32f7xx.s" file.
*
* - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
* by the user application to setup the SysTick
* timer or configure other parameters.
*
* - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
* be called whenever the core clock is changed
* during program execution.
*
*
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2016 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/** @addtogroup CMSIS
* @{
*/
/** @addtogroup stm32f7xx_system
* @{
*/
/** @addtogroup STM32F7xx_System_Private_Includes
* @{
*/
#include "stm32f7xx.h"
#if !defined (HSE_VALUE)
#define HSE_VALUE ((uint32_t)25000000) /*!< Default value of the External oscillator in Hz */
#endif /* HSE_VALUE */
#if !defined (HSI_VALUE)
#define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
#endif /* HSI_VALUE */
/**
* @}
*/
/** @addtogroup STM32F7xx_System_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @addtogroup STM32F7xx_System_Private_Defines
* @{
*/
/************************* Miscellaneous Configuration ************************/
/*!< Uncomment the following line if you need to relocate your vector Table in
Internal SRAM. */
/* #define VECT_TAB_SRAM */
#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
This value must be a multiple of 0x200. */
/******************************************************************************/
/**
* @}
*/
/** @addtogroup STM32F7xx_System_Private_Macros
* @{
*/
/**
* @}
*/
/** @addtogroup STM32F7xx_System_Private_Variables
* @{
*/
/* This variable is updated in three ways:
1) by calling CMSIS function SystemCoreClockUpdate()
2) by calling HAL API function HAL_RCC_GetHCLKFreq()
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
Note: If you use this function to configure the system clock; then there
is no need to call the 2 first functions listed above, since SystemCoreClock
variable is updated automatically.
*/
uint32_t SystemCoreClock = 16000000;
const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4};
/**
* @}
*/
/** @addtogroup STM32F7xx_System_Private_FunctionPrototypes
* @{
*/
/**
* @}
*/
/** @addtogroup STM32F7xx_System_Private_Functions
* @{
*/
/**
* @brief Setup the microcontroller system
* Initialize the Embedded Flash Interface, the PLL and update the
* SystemFrequency variable.
* @param None
* @retval None
*/
void SystemInit(void)
{
/* FPU settings ------------------------------------------------------------*/
#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */
#endif
/* Reset the RCC clock configuration to the default reset state ------------*/
/* Set HSION bit */
RCC->CR |= (uint32_t)0x00000001;
/* Reset CFGR register */
RCC->CFGR = 0x00000000;
/* Reset HSEON, CSSON and PLLON bits */
RCC->CR &= (uint32_t)0xFEF6FFFF;
/* Reset PLLCFGR register */
RCC->PLLCFGR = 0x24003010;
/* Reset HSEBYP bit */
RCC->CR &= (uint32_t)0xFFFBFFFF;
/* Disable all interrupts */
RCC->CIR = 0x00000000;
/* Configure the Vector Table location add offset address ------------------*/
#ifdef VECT_TAB_SRAM
SCB->VTOR = RAMDTCM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
#else
SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
#endif
}
/**
* @brief Update SystemCoreClock variable according to Clock Register Values.
* The SystemCoreClock variable contains the core clock (HCLK), it can
* be used by the user application to setup the SysTick timer or configure
* other parameters.
*
* @note Each time the core clock (HCLK) changes, this function must be called
* to update SystemCoreClock variable value. Otherwise, any configuration
* based on this variable will be incorrect.
*
* @note - The system frequency computed by this function is not the real
* frequency in the chip. It is calculated based on the predefined
* constant and the selected clock source:
*
* - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
*
* - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
*
* - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
* or HSI_VALUE(*) multiplied/divided by the PLL factors.
*
* (*) HSI_VALUE is a constant defined in stm32f7xx_hal_conf.h file (default value
* 16 MHz) but the real value may vary depending on the variations
* in voltage and temperature.
*
* (**) HSE_VALUE is a constant defined in stm32f7xx_hal_conf.h file (default value
* 25 MHz), user has to ensure that HSE_VALUE is same as the real
* frequency of the crystal used. Otherwise, this function may
* have wrong result.
*
* - The result of this function could be not correct when using fractional
* value for HSE crystal.
*
* @param None
* @retval None
*/
void SystemCoreClockUpdate(void)
{
uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2;
/* Get SYSCLK source -------------------------------------------------------*/
tmp = RCC->CFGR & RCC_CFGR_SWS;
switch (tmp)
{
case 0x00: /* HSI used as system clock source */
SystemCoreClock = HSI_VALUE;
break;
case 0x04: /* HSE used as system clock source */
SystemCoreClock = HSE_VALUE;
break;
case 0x08: /* PLL used as system clock source */
/* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N
SYSCLK = PLL_VCO / PLL_P
*/
pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;
pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
if (pllsource != 0)
{
/* HSE used as PLL clock source */
pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
}
else
{
/* HSI used as PLL clock source */
pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
}
pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;
SystemCoreClock = pllvco/pllp;
break;
default:
SystemCoreClock = HSI_VALUE;
break;
}
/* Compute HCLK frequency --------------------------------------------------*/
/* Get HCLK prescaler */
tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
/* HCLK frequency */
SystemCoreClock >>= tmp;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

224
RTE/Hesso_pack/ext_led.c Normal file
View File

@ -0,0 +1,224 @@
#include "stm32f7xx_hal.h"
#include "ext_led.h"
#include <stdint.h>
//------------------------------------------------------------------------------
static const uint8_t cie1931[101] =
{
0, 0, 1, 1, 1, 1, 2, 2, 2, 3,
3, 3, 4, 4, 4, 5, 5, 6, 6, 7,
8, 8, 9, 10, 10, 11, 12, 13, 14, 15,
16, 17, 18, 19, 20, 22, 23, 24, 26, 27,
29, 30, 32, 34, 35, 37, 39, 41, 43, 45,
47, 49, 51, 54, 56, 58, 61, 64, 66, 69,
72, 75, 78, 81, 84, 87, 90, 93, 97, 100,
104, 108, 111, 115, 119, 123, 127, 131, 136, 140,
145, 149, 154, 159, 163, 168, 173, 179, 184, 189,
195, 200, 206, 212, 217, 223, 230, 236, 242, 248,
255,
};
#if LIGHTNESS_PWM_STEP != 100
#error this cie1931 array supports only 100 steps, feel free to implement your own
#endif
//------------------------------------------------------------------------------
uint8_t lightness_to_pwm(uint8_t percentage)
{
if(percentage > (LIGHTNESS_PWM_STEP-1))
percentage = (LIGHTNESS_PWM_STEP-1);
return cie1931[percentage];
}
//------------------------------------------------------------------------------
//------------------------------------------------------------------------------
int32_t Ext_LED_Init(void) {
GPIO_InitTypeDef GPIO_InitStruct;
//----------------------------------------------------------------------------
// Configure GPIO pin: PA15 (LED0)
__HAL_RCC_GPIOA_CLK_ENABLE(); // enable GPIO timer
__HAL_RCC_TIM2_CLK_ENABLE(); // enable timer 2 clock
GPIO_InitStruct.Pin = GPIO_PIN_15; // used pin is PA15
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; // alternate function use
GPIO_InitStruct.Pull = GPIO_NOPULL; // no pullup
GPIO_InitStruct.Alternate = GPIO_AF1_TIM2;// timer 2 is used
GPIO_InitStruct.Speed = GPIO_SPEED_FAST; // speed is fast
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
TIM2->CCER = TIM_CCER_CC1E; // compare for PWM usage
TIM2->PSC = 16; // timer prescaler
TIM2->ARR = 255; // max count value
TIM2->CCR1 = lightness_to_pwm(0); // duty cycle
TIM2->CCMR1 = TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1PE;
TIM2->EGR |= TIM_EGR_UG; // update register now
TIM2->CR1 = TIM_CR1_ARPE | TIM_CR1_CEN; // start the timer
//----------------------------------------------------------------------------
// Configure GPIO pin: PH6 (LED1)
__HAL_RCC_GPIOH_CLK_ENABLE(); // enable GPIO timer
__HAL_RCC_TIM12_CLK_ENABLE(); // enable timer 12 clock
GPIO_InitStruct.Pin = GPIO_PIN_6; // used pin is PH6
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; // alternate function use
GPIO_InitStruct.Pull = GPIO_NOPULL; // no pullup
GPIO_InitStruct.Alternate = GPIO_AF9_TIM12;// timer 12 is used
GPIO_InitStruct.Speed = GPIO_SPEED_FAST; // speed is fast
HAL_GPIO_Init(GPIOH, &GPIO_InitStruct);
TIM12->CCER = TIM_CCER_CC1E; // compare for PWM usage
TIM12->PSC = 16; // timer prescaler
TIM12->ARR = 255; // max count value
TIM12->CCR1 = lightness_to_pwm(0); // duty cycle
TIM12->CCMR1 = TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1PE;
TIM12->EGR |= TIM_EGR_UG; // update register now
TIM12->CR1 = TIM_CR1_ARPE | TIM_CR1_CEN; // start the timer
//----------------------------------------------------------------------------
// Configure GPIO pin: PA8 (LED2)
__HAL_RCC_GPIOA_CLK_ENABLE(); // enable GPIO timer
__HAL_RCC_TIM1_CLK_ENABLE(); // enable timer 1 clock
GPIO_InitStruct.Pin = GPIO_PIN_8; // used pin is PA8
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; // alternate function use
GPIO_InitStruct.Pull = GPIO_NOPULL; // no pullup
GPIO_InitStruct.Alternate = GPIO_AF1_TIM1;// timer 5 is used
GPIO_InitStruct.Speed = GPIO_SPEED_FAST; // speed is fast
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
TIM1->CCER = TIM_CCER_CC1E; // compare for PWM usage
TIM1->PSC = 16; // timer prescaler
TIM1->ARR = 255; // max count value
TIM1->CCR1 = lightness_to_pwm(0); // duty cycle
TIM1->CCMR1 = TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1PE;
TIM1->EGR |= TIM_EGR_UG; // update register now
TIM1->CR1 = TIM_CR1_ARPE | TIM_CR1_CEN; // start the timer
TIM1->BDTR = TIM_BDTR_MOE; // master output enable
//----------------------------------------------------------------------------
// Configure GPIO pin: PB4 (LED3)
__HAL_RCC_GPIOB_CLK_ENABLE(); // enable GPIO timer
__HAL_RCC_TIM3_CLK_ENABLE(); // enable timer 3 clock
GPIO_InitStruct.Pin = GPIO_PIN_4; // used pin is PB4
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; // alternate function use
GPIO_InitStruct.Pull = GPIO_NOPULL; // no pullup
GPIO_InitStruct.Alternate = GPIO_AF2_TIM3;// timer 3 is used
GPIO_InitStruct.Speed = GPIO_SPEED_FAST; // speed is fast
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
TIM3->CCER = TIM_CCER_CC1E; // compare for PWM usage
TIM3->PSC = 16; // timer prescaler
TIM3->ARR = 255; // max count value
TIM3->CCR1 = lightness_to_pwm(0); // duty cycle
TIM3->CCMR1 = TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1PE;
TIM3->EGR |= TIM_EGR_UG; // update register now
TIM3->CR1 = TIM_CR1_ARPE | TIM_CR1_CEN; // start the timer
return 0;
}
//------------------------------------------------------------------------------
//------------------------------------------------------------------------------
int32_t Ext_LED_On (uint32_t num) {
if((num & 1) != 0)
{
TIM2->CCR1 = lightness_to_pwm(LIGHTNESS_PWM_STEP);
}
if((num & 2) != 0)
{
TIM12->CCR1 = lightness_to_pwm(LIGHTNESS_PWM_STEP);
}
if((num & 4) != 0)
{
TIM1->CCR1 = lightness_to_pwm(LIGHTNESS_PWM_STEP);
}
if((num & 8) != 0)
{
TIM3->CCR1 = lightness_to_pwm(LIGHTNESS_PWM_STEP);
}
return 0;
}
//------------------------------------------------------------------------------
//------------------------------------------------------------------------------
int32_t Ext_LED_Off (uint32_t num) {
if((num & 1) != 0)
{
TIM2->CCR1 = lightness_to_pwm(0);
}
if((num & 2) != 0)
{
TIM12->CCR1 = lightness_to_pwm(0);
}
if((num & 4) != 0)
{
TIM1->CCR1 = lightness_to_pwm(0);
}
if((num & 8) != 0)
{
TIM3->CCR1 = lightness_to_pwm(0);
}
return 0;
}
//------------------------------------------------------------------------------
//------------------------------------------------------------------------------
int32_t Ext_LED_PWM (uint32_t num, uint32_t duty) {
if((num & 1) != 0)
{
TIM2->CCR1 = lightness_to_pwm(duty);
}
if((num & 2) != 0)
{
TIM12->CCR1 = lightness_to_pwm(duty);
}
if((num & 4) != 0)
{
TIM1->CCR1 = lightness_to_pwm(duty);
}
if((num & 8) != 0)
{
TIM3->CCR1 = lightness_to_pwm(duty);
}
return 0;
}
//------------------------------------------------------------------------------
//------------------------------------------------------------------------------
int32_t Ext_LEDs(uint32_t num) {
if((num & 1) != 0)
{
TIM2->CCR1 = lightness_to_pwm(LIGHTNESS_PWM_STEP);
}
else
{
TIM2->CCR1 = lightness_to_pwm(0);
}
if((num & 2) != 0)
{
TIM12->CCR1 = lightness_to_pwm(LIGHTNESS_PWM_STEP);
}
else
{
TIM12->CCR1 = lightness_to_pwm(0);
}
if((num & 4) != 0)
{
TIM1->CCR1 = lightness_to_pwm(LIGHTNESS_PWM_STEP);
}
else
{
TIM1->CCR1 = lightness_to_pwm(0);
}
if((num & 8) != 0)
{
TIM3->CCR1 = lightness_to_pwm(LIGHTNESS_PWM_STEP);
}
else
{
TIM3->CCR1 = lightness_to_pwm(0);
}
return 0;
}

51
RTE/Hesso_pack/ext_led.h Normal file
View File

@ -0,0 +1,51 @@
/************************************************************************//**
* \file ext_led.h
* \brief Function to use the extension LEDs
* \author pascal (dot) sartoretti (at) hevs (dot) ch
***************************************************************************/
#ifndef __EXT_LED_H
#define __EXT_LED_H
#include <stdint.h>
#define LIGHTNESS_PWM_STEP 100
/************************************************************************//**
* \brief Inits the external Leds usage.
* \return Always #0
***************************************************************************/
extern int32_t Ext_LED_Init (void);
/************************************************************************//**
* \brief Turn on one led.
* \param num The led to turn on (1,2,4,8)
* \return Always 0
***************************************************************************/
extern int32_t Ext_LED_On (uint32_t num);
/************************************************************************//**
* \brief Turn off one led.
* \param num The led to turn off (1,2,4,8)
* \return Always 0
***************************************************************************/
extern int32_t Ext_LED_Off (uint32_t num);
/************************************************************************//**
* \brief Set a power on a led.
* \param num The led to turn set the power (1,2,4,8)
* \param duty The power of the led (0 to 255)
* \return Always 0
***************************************************************************/
extern int32_t Ext_LED_PWM (uint32_t num, uint32_t duty);
/************************************************************************//**
* \brief Set the state on all leds.
* \param val The binary state of the four leds (example 0b1101).
* \return Always 0
***************************************************************************/
extern int32_t Ext_LEDs(uint32_t val);
#endif /* __BOARD_LED_H */

57
RTE/Hesso_pack/ext_uart.c Normal file
View File

@ -0,0 +1,57 @@
#include "stm32f7xx_hal.h"
#include "ext_uart.h"
UART_HandleTypeDef ext_uart; // extension uart handler
//------------------------------------------------------------------------------
//------------------------------------------------------------------------------
void HAL_UART_MspInit(UART_HandleTypeDef* huart)
{
GPIO_InitTypeDef GPIO_InitStruct;
if(huart->Instance==USART6)
{
__HAL_RCC_GPIOC_CLK_ENABLE();
__HAL_RCC_USART6_CLK_ENABLE();
/**USART6 GPIO Configuration
PC7 ------> USART6_RX
PC6 ------> USART6_TX
*/
GPIO_InitStruct.Pin = GPIO_PIN_7|GPIO_PIN_6;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_PULLUP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF8_USART6;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
}
}
//------------------------------------------------------------------------------
//------------------------------------------------------------------------------
void Ext_UART_Init(uint32_t speed)
{
ext_uart.Instance = USART6;
ext_uart.Init.BaudRate = speed;
ext_uart.Init.WordLength = UART_WORDLENGTH_8B;
ext_uart.Init.StopBits = UART_STOPBITS_1;
ext_uart.Init.Parity = UART_PARITY_NONE;
ext_uart.Init.Mode = UART_MODE_TX_RX;
ext_uart.Init.HwFlowCtl = UART_HWCONTROL_NONE;
ext_uart.Init.OverSampling = UART_OVERSAMPLING_16;
ext_uart.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
ext_uart.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
HAL_UART_Init(&ext_uart);
/* USART6 interrupt Init */
HAL_NVIC_SetPriority(USART6_IRQn, 0, 0);
HAL_NVIC_EnableIRQ(USART6_IRQn);
}
//------------------------------------------------------------------------------
//------------------------------------------------------------------------------
void USART6_IRQHandler(void)
{
HAL_UART_IRQHandler(&ext_uart);
}

44
RTE/Hesso_pack/ext_uart.h Normal file
View File

@ -0,0 +1,44 @@
/************************************************************************//**
* \file ext_uart.h
* \brief Function to use the extension uart
* \author pascal (dot) sartoretti (at) hevs (dot) ch
***************************************************************************/
#ifndef __EXT_UART_H
#define __EXT_UART_H
#include <stdint.h>
#include "stm32f7xx_hal.h"
extern UART_HandleTypeDef ext_uart; // extension uart handle
/************************************************************************//**
* \brief Inits the extension uart
* \param speed This si the uart speed selected for example 115200.
* The extension uart could be use with or without interrupts.
*
* Without interrupts:
* -------------------
* To send something on the uart, you have to use HAL_UART_Transmit function
* as the example below.
* error = HAL_UART_Transmit(&ext_uart, msg, sizeof(msg),50);
* To receive you have to use HAL_UART_Receive as example below.
* error = HAL_UART_Receive(&ext_uart, msg, sizeof(msg),HAL_MAX_DELAY);
* The HAL_MAX_DELAY waits until receive is finished.
*
* With interrupts:
* ----------------
* The functions below have to be used:
* HAL_UART_Transmit_IT(&ext_uart," Welcome\n\r", 10);
* HAL_UART_Receive_IT(&ext_uart,data,8);
*
* The callback functions above could be implemented for usage on interrupt
* mode when the full size is transmitted (or received).
* void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart)
* void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart)
*
***************************************************************************/
extern void Ext_UART_Init(uint32_t speed);
#endif /* __BOARD_LED_H */

54
RTE/_Target_1/RTE_Components.h Normal file
View File

@ -0,0 +1,54 @@
/*
* Auto generated Run-Time-Environment Configuration File
* *** Do not modify ! ***
*
* Project: 'lab06-evt'
* Target: 'Target 1'
*/
#ifndef RTE_COMPONENTS_H
#define RTE_COMPONENTS_H
/*
* Define the Device Header File:
*/
#define CMSIS_device_header "stm32f7xx.h"
/* ARM::CMSIS:RTOS2:Keil RTX5:Source:5.5.4 */
#define RTE_CMSIS_RTOS2 /* CMSIS-RTOS2 */
#define RTE_CMSIS_RTOS2_RTX5 /* CMSIS-RTOS2 Keil RTX5 */
#define RTE_CMSIS_RTOS2_RTX5_SOURCE /* CMSIS-RTOS2 Keil RTX5 Source */
/* Keil.ARM Compiler::Compiler:Event Recorder:DAP:1.5.1 */
#define RTE_Compiler_EventRecorder
#define RTE_Compiler_EventRecorder_DAP
/* Keil.ARM Compiler::Compiler:I/O:STDIN:User:1.2.0 */
#define RTE_Compiler_IO_STDIN /* Compiler I/O: STDIN */
#define RTE_Compiler_IO_STDIN_User /* Compiler I/O: STDIN User */
/* Keil.ARM Compiler::Compiler:I/O:STDOUT:User:1.2.0 */
#define RTE_Compiler_IO_STDOUT /* Compiler I/O: STDOUT */
#define RTE_Compiler_IO_STDOUT_User /* Compiler I/O: STDOUT User */
/* Keil::Device:STM32Cube Framework:Classic:1.2.7 */
#define RTE_DEVICE_FRAMEWORK_CLASSIC
/* Keil::Device:STM32Cube HAL:CRC:1.2.7 */
#define RTE_DEVICE_HAL_CRC
/* Keil::Device:STM32Cube HAL:Common:1.2.7 */
#define RTE_DEVICE_HAL_COMMON
/* Keil::Device:STM32Cube HAL:Cortex:1.2.7 */
#define RTE_DEVICE_HAL_CORTEX
/* Keil::Device:STM32Cube HAL:DMA:1.2.7 */
#define RTE_DEVICE_HAL_DMA
/* Keil::Device:STM32Cube HAL:GPIO:1.2.7 */
#define RTE_DEVICE_HAL_GPIO
/* Keil::Device:STM32Cube HAL:PWR:1.2.7 */
#define RTE_DEVICE_HAL_PWR
/* Keil::Device:STM32Cube HAL:RCC:1.2.7 */
#define RTE_DEVICE_HAL_RCC
/* Keil::Device:STM32Cube HAL:UART:1.2.7 */
#define RTE_DEVICE_HAL_UART
/* Keil::Device:Startup:1.2.4 */
#define RTE_DEVICE_STARTUP_STM32F7XX /* Device Startup for STM32F7 */
#endif /* RTE_COMPONENTS_H */