SEm-Labos/Libs/RiscV/NEORV32/sw/isa-test/port-neorv32

NEORV32 Port for running the RISC-V Architecture Tests

The following tasks are executed by the device makefiles:

• replace the original processor's IMEM rtl file by a simulation-optimized IMEM (ROM!)
• sed command is used to modify the default testbench (neorv32/sim/neorv32_tb.simple.vhd):
  • enable/disable the required CPU_EXTENSION_RISCV_xxx VHDL configuration generics in the testbench (neorv32/sim/neorv32_tb.simple.vhd)
  • set the processor memory configuration
• compile test code and install application image to processor's rtl/core folder
  • compilation uses the link.imem_rom.ld linker script as default; code (the test code) is executed from simulation-optimized IMEM (which is read-only); data including signature is stored to DMEM
  • certain areas in the DMEM are initialized using port code in model_test.h (RVTEST = 0xbabecafe and SIGNATURE = 0xdeadbeef); can be disabled using RISCV_TARGET_FLAGS=-DNEORV32_NO_DATA_INIT
• the processor is simulated using the default testbench
• the results are dumped via the SIM_MODE feature of UART0
  • the according code can be found in the RVMODEL_HALT macro in model_test.h
  • data output (the "signature") is zero-padded to be always a multiple of 16 bytes

Notes

⚠️ The Zifencei test requires the r/w/e capabilities of the original IMEM rtl file. Hence, the original file is restored for this test. Also, this test uses link.imem_ram.ld as linker script since the IMEM is used as RAM to allow self-modifying code.

ℹ️ The RVMODEL_BOOT macro in model_test.h provides a simple "dummy trap handler" that just advances to the next instruction. This trap handler is required for some C tests as the NEORV32 will raise an illegal instruction exception for all unimplemented instructions. The trap handler can be overriden (by changing mtval CSR) if a test uses the defualt trap handler of the test framework.