SEm-Labos/Libs/RiscV_test/NEORV32_test

Simulation Source Folder

simple

Simple testbench for the NEORV32 Processor and script for simulation using GHDL.

• ghdl.setup.sh
• ghdl.run.sh
• ghdl.sh
• neorv32_tb.simple.vhd
• neorv32_imem.simple.vhd: memory component optimized for simulation.
• neorv32_imem.iram.simple.vhd
• uart_rx.simple.vhd

VUnit testbench

VUnit testbench for the NEORV32 Processor.

• run.py
• neorv32_tb.vhd
• uart_rx_pkg.vhd
• uart_rx.vhd

run_riscv_arch_test.sh: NEORV32 RISC-V Architecture Test Framework

This script tests the NEORV32 Processor for RISC-V compatibility using the official RISC-V architecture test suite v2+. The core's HDL sources are simulated using GHDL to provide a virtual execution platform for the test framework:

• rv32i_m/C - compressed instructions
• rv32i_m/I - base ISA
• rv32i_m/M - hardware integer multiplication and division
• rv32i_m/privilege - privileged architecture
• rv32i_m/Zifencei - instruction stream synchronization (for example for self-modifying code)

⚠️ The RISC-V GCC toolchain (riscv{32|64}-unknown-elf) is required for program compilation, and the simulation depends on simple/ghdl_sim.sh.

To execute all the supported tests open a terminal and run ./sim/run_riscv_arch_test.sh, which does the following:

• Make a local copy of the NEORV32 rtl folder in work/, to keep the project's core files clean.
• Clone (as git submodule) the riscv-arch-test repository into sw/isa-test/riscv-arch-test.
• Install (copy) the custom neorv32 test target from sw/isa-test/port-neorv32 to the test suite's target folder work/riscv-arch-test/riscv-target/neorv32.
• Run the actual tests.

⚠️ Simulating all the test cases takes quite some time. Some tests use an optimised description of IMEM (neorv32_imem.simple.vhd), but others require the original because they execute self-modifying code.

⚠️ If the simulation of a test does not generate any signature output at all or if the signature is truncated, try increasing the simulation time by modiying the SIM_TIME variable when calling the test makefiles in run_riscv_arch_test.sh.

More datails regarding the actual simulation process can be found in the target's README.