documentation about measure

main.c

@@ -1,108 +1,67 @@
-/**
+/*!
-  Generated Main Source File
+ * @file main.c
+ * @authors Simon Donnet-Monay & Remi Heredero
+ * @date 14 march 2023
+ * @brief Main is in two part.
+ * First for setup everything
+ * Second for loop on measure and set duty cycle for PWM
+ */
 
-  Company:
-    Microchip Technology Inc.
-
-  File Name:
-    main.c
-
-  Summary:
-    This is the main file generated using PIC10 / PIC12 / PIC16 / PIC18 MCUs
-
-  Description:
-    This header file provides implementations for driver APIs for all modules selected in the GUI.
-    Generation Information :
-        Product Revision  :  PIC10 / PIC12 / PIC16 / PIC18 MCUs - 1.81.8
-        Device            :  PIC18F97J60
-        Driver Version    :  2.00
-*/
-
-/*
-    (c) 2018 Microchip Technology Inc. and its subsidiaries. 
-    
-    Subject to your compliance with these terms, you may use Microchip software and any 
-    derivatives exclusively with Microchip products. It is your responsibility to comply with third party 
-    license terms applicable to your use of third party software (including open source software) that 
-    may accompany Microchip software.
-    
-    THIS SOFTWARE IS SUPPLIED BY MICROCHIP "AS IS". NO WARRANTIES, WHETHER 
-    EXPRESS, IMPLIED OR STATUTORY, APPLY TO THIS SOFTWARE, INCLUDING ANY 
-    IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, AND FITNESS 
-    FOR A PARTICULAR PURPOSE.
-    
-    IN NO EVENT WILL MICROCHIP BE LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE, 
-    INCIDENTAL OR CONSEQUENTIAL LOSS, DAMAGE, COST OR EXPENSE OF ANY KIND 
-    WHATSOEVER RELATED TO THE SOFTWARE, HOWEVER CAUSED, EVEN IF MICROCHIP 
-    HAS BEEN ADVISED OF THE POSSIBILITY OR THE DAMAGES ARE FORESEEABLE. TO 
-    THE FULLEST EXTENT ALLOWED BY LAW, MICROCHIP'S TOTAL LIABILITY ON ALL 
-    CLAIMS IN ANY WAY RELATED TO THIS SOFTWARE WILL NOT EXCEED THE AMOUNT 
-    OF FEES, IF ANY, THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THIS 
-    SOFTWARE.
-*/
 
 #include "mcc_generated_files/mcc.h"
 #include "lcd/lcd.h"
 #include "measure.h"
 #include "modbus.h"
 
-#define MAX_COL 16
+#define MAX_COL 16 //!< columns for lcd screen (and 2 rows)
-/*
-                         Main application
- */
 
-extern uint16_t input_registers[2];
+void main(void) {
-void main(void)
+    
-{
+/* SETUP FUNCTIONS: */
-    // Initialize the device
+    
+    // Initialize the system with all mcc default configs
     SYSTEM_Initialize();
-    EPWM1_LoadDutyValue(0);
     
-    Lcd_Init(); 
+    Lcd_Init();         // Initialize lcd screen
-    adc_init();
+    adc_init();         // Initialize adc for measures
-    modbus_init(0x80);
+    modbus_init(0x80);  // Initialize all specific modbus function
-    uint16_t offsetCurrent = 0;
-    offsetCurrent = measure_current(offsetCurrent);
-
-    // If using interrupts in PIC18 High/Low Priority Mode you need to enable the Global High and Low Interrupts
-    // If using interrupts in PIC Mid-Range Compatibility Mode you need to enable the Global and Peripheral Interrupts
-    // Use the following macros to:
 
     // Enable the Global Interrupts
     INTERRUPT_GlobalInterruptEnable();
     
-    // Disable the Global Interrupts
-    //INTERRUPT_GlobalInterruptDisable();
-
     // Enable the Peripheral Interrupts
     INTERRUPT_PeripheralInterruptEnable();
     
-    // Disable the Peripheral Interrupts
+    /*
-    //INTERRUPT_PeripheralInterruptDisable();
+     * Initialize offset current.
+     * 1. disable load
+     * 2. Measure current without load
+     * 
+     * The goal it's to remove the offset due to the electronics parts
+     */
+    EPWM1_LoadDutyValue(0);
+    const uint16_t offsetCurrent = measure_current(offsetCurrent);
     
+    // create a char array for display on lcd (with space for '\0')
+    char msg[MAX_COL+1]; 
     
-    while (1)
+/* LOOP MAIN PROGRAM: */
-    {
     
-        EPWM1_LoadDutyValue(holding_registers[0]);
+    while (1) {
+        
+        // Get the measure and save it and the appropriate register
         input_registers[0] = measure_voltage();
         input_registers[1] = measure_current(offsetCurrent);
-        uint16_t valueV = input_registers[0];
-        uint16_t valueI = input_registers[1];
         
-        char msg[MAX_COL+1];
+        // Print on the first row of the lcd the Voltage
-        //LCD_2x16_WriteCmd(0x01);    // clear display
+        sprintf(msg, "U = %04d [mV] ", input_registers[0]);
-        
-        sprintf(msg, "U = %04d [mV] ", valueV);
         LCD_2x16_WriteMsg(msg,0);
         
-        sprintf(msg, "I = %04d [uA] ", valueI);
+        // Print on the second row of the lcd the current
+        sprintf(msg, "I = %04d [uA] ", input_registers[1]);
         LCD_2x16_WriteMsg(msg,1);
         
+        // Write the duty cycle for pwm from the appropriate register
+        EPWM1_LoadDutyValue(holding_registers[0]);
     }   
 }
-
-
-/**
- End of File
-*/

measure.c

@@ -13,55 +13,58 @@
 // Number of samples to do the averaging during measures
 #define AVERAGE_SAMPLES 8
 
-void adc_init(void)
+void adc_init(void) {
-{
 	// TODO -> complete adc initialisation
     //offsetCurrent = measure_current(0);
-
 }
 
 /**
  * Read one ADC channel. This function is only
  * local to this file.
+ * This function make the average on samples
  *
  * @param channel : the channel to be measured
- * @return the ADC read value
+ * @return the ADC read value with an average
  */
-static uint16_t measure_adc(uint8_t channel)
+static uint16_t measure_adc(uint8_t channel) {
-{
+    uint32_t value = 0;
-	return (uint16_t) (ADC_GetConversion(channel));
-}
-
-
-
-uint16_t measure_voltage()
-{
-    uint32_t sum = 0;
     
+    // Make an average
     for(int i = 0; i < AVERAGE_SAMPLES; i++) {
-        sum += measure_adc(VOLTAGE_CHANNEL);
+        value += (uint16_t) (ADC_GetConversion(channel));
     }
-    sum /= AVERAGE_SAMPLES;
+    value /= AVERAGE_SAMPLES;
-    sum = (sum * ADC_REFH) / ADC_RESOLUTION;
+	return (uint16_t) (value);
-    return (uint16_t)(sum);
 }
 
-uint16_t measure_current(uint16_t offset)
-{
-	uint32_t sum = 0;
-    for(int i = 0; i< AVERAGE_SAMPLES; i++){
-        sum += measure_adc(CURRENT_CHANNEL);
-    } 
-    uint32_t m = (sum / AVERAGE_SAMPLES);   // m is bits
-    m = (m * ADC_REFH) / ADC_RESOLUTION;    // m is mV
-    m *= 1000;                              // m is uV
-    m /= GAIN;
-    m /= RESISTOR;                          // m is uA
-    if(m <= offset){
-        m = 0;
-    } else {
-        m -= offset;
-    }
 
-    return (uint16_t)m;
+/**
+ * Measure voltage
+ * @return 
+ */
+uint16_t measure_voltage() {
+    uint32_t value = measure_adc(VOLTAGE_CHANNEL);
+    
+    // Convert sum from bits to mV
+    value = (value * ADC_REFH) / ADC_RESOLUTION;
+    return (uint16_t)(value);
+}
+
+/**
+ * 
+ * @param offset
+ * @return 
+ */
+uint16_t measure_current(uint16_t offset) {
+	uint32_t value = measure_adc(CURRENT_CHANNEL);
+    
+    // Convert from bits to uA
+    value = (value * ADC_REFH) / ADC_RESOLUTION;    // [mV]
+    value *= 1000;  // [uV]
+    value /= GAIN;  // [uV]
+    value /= RESISTOR;  // [uA]
+    
+    // Return value without offset or null if it's too low
+    if(value > offset) return (uint16_t)(value-offset);
+    return 0;
 }

modbus.c

@@ -1,14 +1,17 @@
+/*!
+ * @file modbus.c
+ * @authors Simon Donnet-Monay & Remi Heredero
+ * @date 14 march 2023
+ * @brief 
+ */
+
 #include "modbus.h"
 #include "crc.h"
-#include "uart.h"
-#include <xc.h>
-#include <stdint.h>
-#include <stdio.h>
 
 // Modbus functions
-#define READ_INPUT_REGISTERS    0x04
+#define READ_INPUT_REGISTERS    0x04 // Modbus function for read input register
-#define READ_HOLDING_REGISTERS  0x03
+#define READ_HOLDING_REGISTERS  0x03 // Modbus function for read holding register
-#define WRITE_SINGLE_REGISTER   0x06
+#define WRITE_SINGLE_REGISTER   0x06 // Modbus function for write a single register
 
 // Modbus data model
 uint8_t modbusAddress;
@@ -32,47 +35,83 @@ uint8_t tx_buf[256];
 // Current position pointer for storing receive position
 uint8_t recPtr = 0;
 
-void modbus_timer(void)
+/**
-{
+ * End of MODBUS frame. 
-	INTCONbits.TMR0IF = 0;
+ */
-    recPtr = 0;   
+void modbus_timer(void) {
-    TMR0_StopTimer();
+	INTCONbits.TMR0IF = 0;          // Reset flag of the timer0 interrupt 
-    modbus_analyse_and_answer();
+    recPtr = 0;                     // Reset position of the char in the frame
-   
+    TMR0_StopTimer();               // Stop timer who detect the end of the frame
+    modbus_analyse_and_answer();    // Run analyse of this frame
 }
+
 extern uint16_t measure_voltage();
+
+/**
+ * @brief Analyse the received frame and build an answer
+ * @return The error code if the frame isn't valid (TODO)
+ */
 uint8_t modbus_analyse_and_answer(void) {
-	// TODO -> complete the modbus analyse and answer
+    // Init lenght of the answer frame at 0
     uint16_t length = 0;
+    
+    // Check if the received frame is for this device
     if(rx_buf[0] == modbusAddress){
-        tx_buf[0] = rx_buf[0]; // Adress
+        tx_buf[0] = rx_buf[0];  // Copy the address on the tx buffer
-        tx_buf[1] = rx_buf[1]; // Function
+        tx_buf[1] = rx_buf[1];  // Copy the function number on the tx buffer
+        
+        // Init the addresse Register local variable
         uint16_t adresseRegister = ((uint16_t)rx_buf[2] << 8) | rx_buf[3];
         
         switch(rx_buf[1]){  // Check the function from rx buffer
+            
+            // In case of the function is to read input register: 
             case READ_INPUT_REGISTERS: 
+                // Define length as the number of register we want read
                 length = ((uint16_t)rx_buf[4] << 8) | rx_buf[5];
-                tx_buf[2] = (uint8_t)(length*2);        // Data length
+                
+                // Write this length on the tx buffer for the answer
+                tx_buf[2] = (uint8_t)(length*2);
+                
+                // For each register, write the value on the tx buffer (register on 16bits)
                 for(uint16_t i = 0; i < length; i++){   // Data
                     tx_buf[i*2+4] = input_registers[adresseRegister+i];
                     tx_buf[i*2+3] = (input_registers[adresseRegister+i] >> 8);
                 }
-                length*=2;
+                
-                length+=3;
+                // Transform length as the number of bytes on tx register
+                length*=2;  // 2 bytes by register
+                length+=3;  // + address + function + length
                 break;
+            
+                
+            // In case of the function is to read holding register
             case READ_HOLDING_REGISTERS:
+                // Define length as the number of register we want read
                 length = ((uint16_t)rx_buf[4] << 8) | rx_buf[5];
-                tx_buf[2] = (uint8_t)(length*2);        // Data length
+                
-                for(uint16_t i = 0; i < length; i++){   // Data
+                // Write this length on the tx buffer for the answer
+                tx_buf[2] = (uint8_t)(length*2);
+                
+                // For each register, write the value on the tx buffer (register on 16bits))
+                for(uint16_t i = 0; i < length; i++){
                     tx_buf[i*2+4] = holding_registers[adresseRegister+i];
                     tx_buf[i*2+3] = (holding_registers[adresseRegister+i] >> 8);
                 }
-                length*=2;
+                // Transform length as the number of bytes on tx register
-                length+=3;
+                length*=2;  // 2 bytes by register
+                length+=3;  // + address + function + length
                 break;
+                
+            
+            // In case of the funciton is to write a single register
             case WRITE_SINGLE_REGISTER:
+                
+                // Write the value on rx buffer on the holding register define by the adress register we define before
                 holding_registers[adresseRegister] = ((uint16_t)rx_buf[4] << 8) | rx_buf[5];
-                for (int i = 2; i <= 5; i++) {
+                
+                // Copy data on the tx buffer
+                for (uint8_t i = 2; i <= 5; i++) {
                     tx_buf[i] = rx_buf[i];
                     length = i+1;
                 }
@@ -81,38 +120,62 @@ uint8_t modbus_analyse_and_answer(void) {
         
     }
       
+    // Clear address on rx buffer (for validate we treat the data)
     rx_buf[0] = 0;
+    
+    // Send the answer frame
     modbus_send(length);
     
+    // TODO return error code
+  
 }
 
-void modbus_char_recvd(void)
+/**
-{
+ * Record a char when it's received on the modbus
+ */
+void modbus_char_recvd(void) {
+    //! Record the received char on the rx buffer and move position of the record pointer for the next char
 	rx_buf[recPtr++] = RCREG1;
+    
+    //! Reload and start the timer0 for restart to count the time between char
     TMR0_Reload();
     TMR0_StartTimer();
 }
 
-void modbus_send(uint8_t length)
+/**
-{
+ * Create the CRC and send the tx buffer
-    
+ * @param length lenght of the frame without the CRC
+ */
+void modbus_send(uint8_t length) {
+    // Create the CRC
 	uint16_t crc = CRC16(tx_buf, length);
 	
+    // Write CRC on the tx buffer
     tx_buf[length] = crc;
     tx_buf[length+1] = crc >> 8;
 
-	length += 2; // add 2 CRC bytes for total size
+	length += 2; //! add 2 CRC bytes for total size
 
-	// For all the bytes to be transmitted
+	// Send each byte of the frame on the tx buffer
     for (uint8_t i = 0; i < length; i++){
           EUSART1_Write(tx_buf[i]);
       }
 }
 
-void modbus_init(uint8_t address)
+/**
-{
+ * Initialize the modbus with adress and handler function
+ * @param address The adress of this device on modbus protocole
+ */
+void modbus_init(uint8_t address) {
+	// Init the modbus adress
     modbusAddress = address;
+    
+    // Save the modbus adress in the dedicated register
     holding_registers[1] = address;
+    
+    // Set the handler for the character detection
     EUSART1_SetRxInterruptHandler(modbus_char_recvd);
+    
+    // Set the handler for the detection of end frame
     TMR0_SetInterruptHandler(modbus_timer);
 }

modbus.h

@@ -7,6 +7,8 @@
 #define	MODBUS_H
 
 #include <stdint.h>
+#include <xc.h>
+#include <stdio.h>
 
 extern uint8_t modbusAddress;
 extern uint16_t input_registers[2];

nbproject/Makefile-genesis.properties

@@ -1,14 +1,8 @@
 #
-#Tue Mar 14 13:52:25 CET 2023
+#Sat Mar 18 16:03:57 CET 2023
-default.languagetoolchain.version=2.40
+proj.dir=C\:\\Users\\remi\\MPLABXProjects\\Solar-Panel
-default.Pack.dfplocation=C\:\\Program Files\\Microchip\\MPLABX\\v6.00\\packs\\Microchip\\PIC18F-J_DFP\\1.5.44
+host.id=aq84-7qg1-w
-conf.ids=default
-default.languagetoolchain.dir=C\:\\Program Files\\Microchip\\xc8\\v2.40\\bin
-host.id=3awj-afwq-rl
 configurations-xml=4dc45b219db50423420a0eb2e1f688ad
-default.com-microchip-mplab-mdbcore-snap-SnapToolImpl.md5=eaa336cefb7fc46db8b50b7b2b6e54ca
+com-microchip-mplab-nbide-embedded-makeproject-MakeProject.md5=bcd6e5453a11ce86aaffd5305e838602
-com-microchip-mplab-nbide-embedded-makeproject-MakeProject.md5=6e02ca5e9f5042ffd365b42ab82d3a9b
-user-defined-mime-resolver-xml=none
-default.com-microchip-mplab-nbide-toolchain-xc8-XC8LanguageToolchain.md5=ab1e0737b447a24f7366e9fd8fe5a2f0
-proj.dir=C\:\\Users\\remi\\MPLABXProjects\\solar_panel
 host.platform=windows
+conf.ids=

nbproject/Makefile-impl.mk

@@ -24,7 +24,7 @@ CLEAN_SUBPROJECTS=${CLEAN_SUBPROJECTS_${SUBPROJECTS}}
 
 
 # Project Name
-PROJECTNAME=solar_panel
+PROJECTNAME=Solar-Panel
 
 # Active Configuration
 DEFAULTCONF=default

nbproject/Makefile-variables.mk

@@ -6,5 +6,5 @@
 CND_BASEDIR=`pwd`
 # default configuration
 CND_ARTIFACT_DIR_default=dist/default/production
-CND_ARTIFACT_NAME_default=solar_panel.production.hex
+CND_ARTIFACT_NAME_default=Solar-Panel.production.hex
-CND_ARTIFACT_PATH_default=dist/default/production/solar_panel.production.hex
+CND_ARTIFACT_PATH_default=dist/default/production/Solar-Panel.production.hex

nbproject/private/private.xml

@@ -3,14 +3,7 @@
     <editor-bookmarks xmlns="http://www.netbeans.org/ns/editor-bookmarks/2" lastBookmarkId="0"/>
     <open-files xmlns="http://www.netbeans.org/ns/projectui-open-files/2">
         <group>
-            <file>file:/C:/Program%20Files/Microchip/xc8/v2.40/pic/sources/c99/common/doprnt.c</file>
+            <file>file:/C:/Users/remi/MPLABXProjects/Solar-Panel/measure.c</file>
-            <file>file:/C:/Users/remi/MPLABXProjects/solar_panel/lcd/lcd.c</file>
-            <file>file:/C:/Users/remi/MPLABXProjects/solar_panel/modbus.h</file>
-            <file>file:/C:/Users/remi/MPLABXProjects/solar_panel/main.c</file>
-            <file>file:/C:/Program%20Files/Microchip/xc8/v2.40/pic/sources/c99/common/aomod.c</file>
-            <file>file:/C:/Users/remi/MPLABXProjects/solar_panel/modbus.c</file>
-            <file>file:/C:/Users/remi/MPLABXProjects/solar_panel/crc.c</file>
-            <file>file:/C:/Users/remi/MPLABXProjects/solar_panel/mcc_generated_files/tmr0.c</file>
         </group>
     </open-files>
 </project-private>

old_main.c

@@ -1,55 +0,0 @@
-/************************************************************************//**
- * \file	main.c
- * \brief	Program main file for MODBUS controller
- ***************************************************************************/
-
-
-#include <xc.h>
-#include <stdint.h>
-#include <stdbool.h>
-#include <stdio.h>
-
-#include "lcd/lcd.h"
-#include "pwm.h"
-#include "measure.h"
-#include "modbus.h"
-#include "uart.h"
-
-#define _XTAL_FREQ  64000000L
-/**
- * Initialize clock, buttons, leds and interrupts
- */
-void init_hw()
-{
-	OSCCON3 = 0; // runs at 64MHz
-	LCD_Init(LCD_2x16);
-	adc_init();
-	modbus_init(0x80);
-	pwm_init();
-  uart_init();
-	// Interrupts configuration
-	PEIE = 1;
-	GIE = 1;
-}
-
-uint8_t tmpStr[30];
-uint16_t u; ///< Voltage in milliovolts
-uint16_t i; ///< Current in microamperes
-uint16_t p; ///< Power in microwatts
-
-uint16_t offset;
-uint16_t pwm = 512;
-
-void main(void)
-{
-	init_hw();
-	
-	LCD_2x16_WriteMsg((unsigned char *)"Welcome !       ", 0); // display on line 0
-	LCD_2x16_WriteMsg((unsigned char *)"*-*-*-*-*-*-*-*-", 1); // display on line 1
-			
-	// TODO -> complete measure of current offset
-
-	while (true) {
-	// TODO -> complete the main loop
-	}
-}

solar_panel.mc3

@@ -352,7 +352,7 @@
       </entry>
       <entry>
          <key class="com.microchip.mcc.core.tokenManager.RegisterKey" moduleName="ADC" registerAlias="ADCON2"/>
-         <value>128</value>
+         <value>0</value>
       </entry>
       <entry>
          <key class="com.microchip.mcc.core.tokenManager.RegisterKey" moduleName="ADC" registerAlias="ADRESH"/>
@@ -396,7 +396,7 @@
       </entry>
       <entry>
          <key class="com.microchip.mcc.core.tokenManager.SettingKey" moduleName="ADC" registerAlias="ADCON2" settingAlias="ADFM"/>
-         <value>right</value>
+         <value>left</value>
       </entry>
       <entry>
          <key class="com.microchip.mcc.core.tokenManager.SettingKey" moduleName="ADC" registerAlias="ADI" settingAlias="enable"/>

uart.c

@@ -1,7 +0,0 @@
-#include "uart.h"
-
-void uart_send(uint8_t *tx_buf, uint8_t length){
-    for (uint8_t i = 0; i < length; i++){
-        EUSART1_Write(tx_buf[i]);
-    }
-}

uart.h

@@ -1,18 +0,0 @@
-/* 
- * File:   uart.h
- * Author: remi
- *
- * Created on March 3, 2023, 3:23 PM
- */
-
-#ifndef UART_H
-#define	UART_H
-
-#include "mcc_generated_files/mcc.h"
-
-void uart_send(uint8_t *tx_buf, uint8_t length);
-
-
-
-#endif	/* UART_H */
-