Klagarge/tor-heredero-tokenring
Archived
1
0
Fork 0
Code
This repository has been archived on 2024-09-17. You can view files and clone it, but cannot push or open issues or pull requests.
main
tor-heredero-tokenring/RTE/Device/STM32F746NGHx/RTE_Device.h

3278 lines
114 KiB
C
Raw Permalink Normal View History

Hello TOR 2k24 Have fun 🚀
2024-04-10 17:17:57 +00:00
/* -----------------------------------------------------------------------------
* Copyright (c) 2013-2016 ARM Ltd.
*
* This software is provided 'as-is', without any express or implied warranty.
* In no event will the authors be held liable for any damages arising from
* the use of this software. Permission is granted to anyone to use this
* software for any purpose, including commercial applications, and to alter
* it and redistribute it freely, subject to the following restrictions:
*
* 1. The origin of this software must not be misrepresented; you must not
* claim that you wrote the original software. If you use this software in
* a product, an acknowledgment in the product documentation would be
* appreciated but is not required.
*
* 2. Altered source versions must be plainly marked as such, and must not be
* misrepresented as being the original software.
*
* 3. This notice may not be removed or altered from any source distribution.
*
* $Date: 4. November 2016
* $Revision: V1.4.0
*
* Project: RTE Device Configuration for ST STM32F7xx
* -------------------------------------------------------------------------- */
//-------- <<< Use Configuration Wizard in Context Menu >>> --------------------
#ifndef __RTE_DEVICE_H
#define __RTE_DEVICE_H
#define GPIO_PORT0 GPIOA
#define GPIO_PORT1 GPIOB
#define GPIO_PORT2 GPIOC
#define GPIO_PORT3 GPIOD
#define GPIO_PORT4 GPIOE
#define GPIO_PORT5 GPIOF
#define GPIO_PORT6 GPIOG
#define GPIO_PORT7 GPIOH
#define GPIO_PORT8 GPIOI
#define GPIO_PORT9 GPIOJ
#define GPIO_PORT10 GPIOK
#define GPIO_PORT(num) GPIO_PORT##num
// <e> USART1 (Universal synchronous asynchronous receiver transmitter) [Driver_USART1]
// <i> Configuration settings for Driver_USART1 in component ::CMSIS Driver:USART
#define RTE_USART1 0
// <o> USART1_TX Pin <0=>Not Used <1=>PA9 <2=>PB6 <3=>PB14
#define RTE_USART1_TX_ID 0
#if (RTE_USART1_TX_ID == 0)
#define RTE_USART1_TX 0
#elif (RTE_USART1_TX_ID == 1)
#define RTE_USART1_TX 1
#define RTE_USART1_TX_PORT GPIOA
#define RTE_USART1_TX_BIT 9
#elif (RTE_USART1_TX_ID == 2)
#define RTE_USART1_TX 1
#define RTE_USART1_TX_PORT GPIOB
#define RTE_USART1_TX_BIT 6
#elif (RTE_USART1_TX_ID == 3)
#define RTE_USART1_TX 1
#define RTE_USART1_TX_PORT GPIOB
#define RTE_USART1_TX_BIT 14
#else
#error "Invalid USART1_TX Pin Configuration!"
#endif
// <o> USART1_RX Pin <0=>Not Used <1=>PA10 <2=>PB7 <3=>PB15
#define RTE_USART1_RX_ID 0
#if (RTE_USART1_RX_ID == 0)
#define RTE_USART1_RX 0
#elif (RTE_USART1_RX_ID == 1)
#define RTE_USART1_RX 1
#define RTE_USART1_RX_PORT GPIOA
#define RTE_USART1_RX_BIT 10
#elif (RTE_USART1_RX_ID == 2)
#define RTE_USART1_RX 1
#define RTE_USART1_RX_PORT GPIOB
#define RTE_USART1_RX_BIT 7
#elif (RTE_USART1_RX_ID == 3)
#define RTE_USART1_RX 1
#define RTE_USART1_RX_PORT GPIOB
#define RTE_USART1_RX_BIT 15
#else
#error "Invalid USART1_RX Pin Configuration!"
#endif
// <o> USART1_CK Pin <0=>Not Used <1=>PA8
#define RTE_USART1_CK_ID 0
#if (RTE_USART1_CK_ID == 0)
#define RTE_USART1_CK 0
#elif (RTE_USART1_CK_ID == 1)
#define RTE_USART1_CK 1
#define RTE_USART1_CK_PORT GPIOA
#define RTE_USART1_CK_BIT 8
#else
#error "Invalid USART1_CK Pin Configuration!"
#endif
// <o> USART1_CTS Pin <0=>Not Used <1=>PA11
#define RTE_USART1_CTS_ID 0
#if (RTE_USART1_CTS_ID == 0)
#define RTE_USART1_CTS 0
#elif (RTE_USART1_CTS_ID == 1)
#define RTE_USART1_CTS 1
#define RTE_USART1_CTS_PORT GPIOA
#define RTE_USART1_CTS_BIT 11
#else
#error "Invalid USART1_CTS Pin Configuration!"
#endif
// <o> USART1_RTS Pin <0=>Not Used <1=>PA12
#define RTE_USART1_RTS_ID 0
#if (RTE_USART1_RTS_ID == 0)
#define RTE_USART1_RTS 0
#elif (RTE_USART1_RTS_ID == 1)
#define RTE_USART1_RTS 1
#define RTE_USART1_RTS_PORT GPIOA
#define RTE_USART1_RTS_BIT 12
#else
#error "Invalid USART1_RTS Pin Configuration!"
#endif
// <e> DMA Rx
// <o1> Number <2=>2
// <i> Selects DMA Number (only DMA2 can be used)
// <o2> Stream <2=>2 <5=>5
// <i> Selects DMA Stream (only Stream 2 or 5 can be used)
// <o3> Channel <4=>4
// <i> Selects DMA Channel (only Channel 4 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_USART1_RX_DMA 0
#define RTE_USART1_RX_DMA_NUMBER 2
#define RTE_USART1_RX_DMA_STREAM 2
#define RTE_USART1_RX_DMA_CHANNEL 4
#define RTE_USART1_RX_DMA_PRIORITY 0
// <e> DMA Tx
// <o1> Number <2=>2
// <i> Selects DMA Number (only DMA2 can be used)
// <o2> Stream <7=>7
// <i> Selects DMA Stream (only Stream 7 can be used)
// <o3> Channel <4=>4
// <i> Selects DMA Channel (only Channel 4 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_USART1_TX_DMA 0
#define RTE_USART1_TX_DMA_NUMBER 2
#define RTE_USART1_TX_DMA_STREAM 7
#define RTE_USART1_TX_DMA_CHANNEL 4
#define RTE_USART1_TX_DMA_PRIORITY 0
// </e>
// <e> USART2 (Universal synchronous asynchronous receiver transmitter) [Driver_USART2]
// <i> Configuration settings for Driver_USART2 in component ::CMSIS Driver:USART
#define RTE_USART2 0
// <o> USART2_TX Pin <0=>Not Used <1=>PA2 <2=>PD5
#define RTE_USART2_TX_ID 0
#if (RTE_USART2_TX_ID == 0)
#define RTE_USART2_TX 0
#elif (RTE_USART2_TX_ID == 1)
#define RTE_USART2_TX 1
#define RTE_USART2_TX_PORT GPIOA
#define RTE_USART2_TX_BIT 2
#elif (RTE_USART2_TX_ID == 2)
#define RTE_USART2_TX 1
#define RTE_USART2_TX_PORT GPIOD
#define RTE_USART2_TX_BIT 5
#else
#error "Invalid USART2_TX Pin Configuration!"
#endif
// <o> USART2_RX Pin <0=>Not Used <1=>PA3 <2=>PD6
#define RTE_USART2_RX_ID 0
#if (RTE_USART2_RX_ID == 0)
#define RTE_USART2_RX 0
#elif (RTE_USART2_RX_ID == 1)
#define RTE_USART2_RX 1
#define RTE_USART2_RX_PORT GPIOA
#define RTE_USART2_RX_BIT 3
#elif (RTE_USART2_RX_ID == 2)
#define RTE_USART2_RX 1
#define RTE_USART2_RX_PORT GPIOD
#define RTE_USART2_RX_BIT 6
#else
#error "Invalid USART2_RX Pin Configuration!"
#endif
// <o> USART2_CK Pin <0=>Not Used <1=>PA4 <2=>PD7
#define RTE_USART2_CK_ID 0
#if (RTE_USART2_CK_ID == 0)
#define RTE_USART2_CK 0
#elif (RTE_USART2_CK_ID == 1)
#define RTE_USART2_CK 1
#define RTE_USART2_CK_PORT GPIOA
#define RTE_USART2_CK_BIT 4
#elif (RTE_USART2_CK_ID == 2)
#define RTE_USART2_CK 1
#define RTE_USART2_CK_PORT GPIOD
#define RTE_USART2_CK_BIT 7
#else
#error "Invalid USART2_CK Pin Configuration!"
#endif
// <o> USART2_CTS Pin <0=>Not Used <1=>PA0 <2=>PD3
#define RTE_USART2_CTS_ID 0
#if (RTE_USART2_CTS_ID == 0)
#define RTE_USART2_CTS 0
#elif (RTE_USART2_CTS_ID == 1)
#define RTE_USART2_CTS 1
#define RTE_USART2_CTS_PORT GPIOA
#define RTE_USART2_CTS_BIT 0
#elif (RTE_USART2_CTS_ID == 2)
#define RTE_USART2_CTS 1
#define RTE_USART2_CTS_PORT GPIOD
#define RTE_USART2_CTS_BIT 3
#else
#error "Invalid USART2_CTS Pin Configuration!"
#endif
// <o> USART2_RTS Pin <0=>Not Used <1=>PA1 <2=>PD4
#define RTE_USART2_RTS_ID 0
#if (RTE_USART2_RTS_ID == 0)
#define RTE_USART2_RTS 0
#elif (RTE_USART2_RTS_ID == 1)
#define RTE_USART2_RTS 1
#define RTE_USART2_RTS_PORT GPIOA
#define RTE_USART2_RTS_BIT 1
#elif (RTE_USART2_RTS_ID == 2)
#define RTE_USART2_RTS 1
#define RTE_USART2_RTS_PORT GPIOD
#define RTE_USART2_RTS_BIT 4
#else
#error "Invalid USART2_RTS Pin Configuration!"
#endif
// <e> DMA Rx
// <o1> Number <1=>1
// <i> Selects DMA Number (only DMA1 can be used)
// <o2> Stream <5=>5
// <i> Selects DMA Stream (only Stream 5 can be used)
// <o3> Channel <4=>4
// <i> Selects DMA Channel (only Channel 4 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_USART2_RX_DMA 0
#define RTE_USART2_RX_DMA_NUMBER 1
#define RTE_USART2_RX_DMA_STREAM 5
#define RTE_USART2_RX_DMA_CHANNEL 4
#define RTE_USART2_RX_DMA_PRIORITY 0
// <e> DMA Tx
// <o1> Number <1=>1
// <i> Selects DMA Number (only DMA1 can be used)
// <o2> Stream <6=>6
// <i> Selects DMA Stream (only Stream 6 can be used)
// <o3> Channel <4=>4
// <i> Selects DMA Channel (only Channel 4 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_USART2_TX_DMA 0
#define RTE_USART2_TX_DMA_NUMBER 1
#define RTE_USART2_TX_DMA_STREAM 6
#define RTE_USART2_TX_DMA_CHANNEL 4
#define RTE_USART2_TX_DMA_PRIORITY 0
// </e>
// <e> USART3 (Universal synchronous asynchronous receiver transmitter) [Driver_USART3]
// <i> Configuration settings for Driver_USART3 in component ::CMSIS Driver:USART
#define RTE_USART3 0
// <o> USART3_TX Pin <0=>Not Used <1=>PB10 <2=>PC10 <3=>PD8
#define RTE_USART3_TX_ID 0
#if (RTE_USART3_TX_ID == 0)
#define RTE_USART3_TX 0
#elif (RTE_USART3_TX_ID == 1)
#define RTE_USART3_TX 1
#define RTE_USART3_TX_PORT GPIOB
#define RTE_USART3_TX_BIT 10
#elif (RTE_USART3_TX_ID == 2)
#define RTE_USART3_TX 1
#define RTE_USART3_TX_PORT GPIOC
#define RTE_USART3_TX_BIT 10
#elif (RTE_USART3_TX_ID == 3)
#define RTE_USART3_TX 1
#define RTE_USART3_TX_PORT GPIOD
#define RTE_USART3_TX_BIT 8
#else
#error "Invalid USART3_TX Pin Configuration!"
#endif
// <o> USART3_RX Pin <0=>Not Used <1=>PB11 <2=>PC11 <3=>PD9
#define RTE_USART3_RX_ID 0
#if (RTE_USART3_RX_ID == 0)
#define RTE_USART3_RX 0
#elif (RTE_USART3_RX_ID == 1)
#define RTE_USART3_RX 1
#define RTE_USART3_RX_PORT GPIOB
#define RTE_USART3_RX_BIT 11
#elif (RTE_USART3_RX_ID == 2)
#define RTE_USART3_RX 1
#define RTE_USART3_RX_PORT GPIOC
#define RTE_USART3_RX_BIT 11
#elif (RTE_USART3_RX_ID == 3)
#define RTE_USART3_RX 1
#define RTE_USART3_RX_PORT GPIOD
#define RTE_USART3_RX_BIT 9
#else
#error "Invalid USART3_RX Pin Configuration!"
#endif
// <o> USART3_CK Pin <0=>Not Used <1=>PB12 <2=>PC12 <3=>PD10
#define RTE_USART3_CK_ID 0
#if (RTE_USART3_CK_ID == 0)
#define RTE_USART3_CK 0
#elif (RTE_USART3_CK_ID == 1)
#define RTE_USART3_CK 1
#define RTE_USART3_CK_PORT GPIOB
#define RTE_USART3_CK_BIT 12
#elif (RTE_USART3_CK_ID == 2)
#define RTE_USART3_CK 1
#define RTE_USART3_CK_PORT GPIOC
#define RTE_USART3_CK_BIT 12
#elif (RTE_USART3_CK_ID == 3)
#define RTE_USART3_CK 1
#define RTE_USART3_CK_PORT GPIOD
#define RTE_USART3_CK_BIT 10
#else
#error "Invalid USART3_CK Pin Configuration!"
#endif
// <o> USART3_CTS Pin <0=>Not Used <1=>PB13 <2=>PD11
#define RTE_USART3_CTS_ID 0
#if (RTE_USART3_CTS_ID == 0)
#define RTE_USART3_CTS 0
#elif (RTE_USART3_CTS_ID == 1)
#define RTE_USART3_CTS 1
#define RTE_USART3_CTS_PORT GPIOB
#define RTE_USART3_CTS_BIT 13
#elif (RTE_USART3_CTS_ID == 2)
#define RTE_USART3_CTS 1
#define RTE_USART3_CTS_PORT GPIOD
#define RTE_USART3_CTS_BIT 11
#else
#error "Invalid USART3_CTS Pin Configuration!"
#endif
// <o> USART3_RTS Pin <0=>Not Used <1=>PB14 <2=>PD12
#define RTE_USART3_RTS_ID 0
#if (RTE_USART3_RTS_ID == 0)
#define RTE_USART3_RTS 0
#elif (RTE_USART3_RTS_ID == 1)
#define RTE_USART3_RTS 1
#define RTE_USART3_RTS_PORT GPIOB
#define RTE_USART3_RTS_BIT 14
#elif (RTE_USART3_RTS_ID == 2)
#define RTE_USART3_RTS 1
#define RTE_USART3_RTS_PORT GPIOD
#define RTE_USART3_RTS_BIT 12
#else
#error "Invalid USART3_RTS Pin Configuration!"
#endif
// <e> DMA Rx
// <o1> Number <1=>1
// <i> Selects DMA Number (only DMA1 can be used)
// <o2> Stream <1=>1
// <i> Selects DMA Stream (only Stream 1 can be used)
// <o3> Channel <4=>4
// <i> Selects DMA Channel (only Channel 4 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_USART3_RX_DMA 0
#define RTE_USART3_RX_DMA_NUMBER 1
#define RTE_USART3_RX_DMA_STREAM 1
#define RTE_USART3_RX_DMA_CHANNEL 4
#define RTE_USART3_RX_DMA_PRIORITY 0
// <e> DMA Tx
// <o1> Number <1=>1
// <i> Selects DMA Number (only DMA1 can be used)
// <o2> Stream <3=>3 <4=>4
// <i> Selects DMA Stream (only Stream 3 or 4 can be used)
// <o3> Channel <4=>4 <7=>7
// <i> Selects DMA Channel (only Channel 4 or 7 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_USART3_TX_DMA 0
#define RTE_USART3_TX_DMA_NUMBER 1
#define RTE_USART3_TX_DMA_STREAM 3
#define RTE_USART3_TX_DMA_CHANNEL 4
#define RTE_USART3_TX_DMA_PRIORITY 0
// </e>
// <e> UART4 (Universal asynchronous receiver transmitter) [Driver_USART4]
// <i> Configuration settings for Driver_USART4 in component ::CMSIS Driver:USART
#define RTE_UART4 0
// <o> UART4_TX Pin <0=>Not Used <1=>PA0 <2=>PC10 <3=>PA12 <4=>PD1 <5=>PH13
#define RTE_UART4_TX_ID 0
#if (RTE_UART4_TX_ID == 0)
#define RTE_UART4_TX 0
#elif (RTE_UART4_TX_ID == 1)
#define RTE_UART4_TX 1
#define RTE_UART4_TX_PORT GPIOA
#define RTE_UART4_TX_BIT 0
#elif (RTE_UART4_TX_ID == 2)
#define RTE_UART4_TX 1
#define RTE_UART4_TX_PORT GPIOC
#define RTE_UART4_TX_BIT 10
#elif (RTE_UART4_TX_ID == 3)
#define RTE_UART4_TX 1
#define RTE_UART4_TX_PORT GPIOA
#define RTE_UART4_TX_BIT 12
#elif (RTE_UART4_TX_ID == 4)
#define RTE_UART4_TX 1
#define RTE_UART4_TX_PORT GPIOD
#define RTE_UART4_TX_BIT 1
#elif (RTE_UART4_TX_ID == 5)
#define RTE_UART4_TX 1
#define RTE_UART4_TX_PORT GPIOH
#define RTE_UART4_TX_BIT 13
#else
#error "Invalid UART4_TX Pin Configuration!"
#endif
// <o> UART4_RX Pin <0=>Not Used <1=>PA1 <2=>PC11 <3=>PA11 <4=>PD0 <5=>PH14 <6=>PI9
#define RTE_UART4_RX_ID 0
#if (RTE_UART4_RX_ID == 0)
#define RTE_UART4_RX 0
#elif (RTE_UART4_RX_ID == 1)
#define RTE_UART4_RX 1
#define RTE_UART4_RX_PORT GPIOA
#define RTE_UART4_RX_BIT 1
#elif (RTE_UART4_RX_ID == 2)
#define RTE_UART4_RX 1
#define RTE_UART4_RX_PORT GPIOC
#define RTE_UART4_RX_BIT 11
#elif (RTE_UART4_RX_ID == 3)
#define RTE_UART4_RX 1
#define RTE_UART4_RX_PORT GPIOA
#define RTE_UART4_RX_BIT 11
#elif (RTE_UART4_RX_ID == 4)
#define RTE_UART4_RX 1
#define RTE_UART4_RX_PORT GPIOD
#define RTE_UART4_RX_BIT 0
#elif (RTE_UART4_RX_ID == 5)
#define RTE_UART4_RX 1
#define RTE_UART4_RX_PORT GPIOH
#define RTE_UART4_RX_BIT 14
#elif (RTE_UART4_RX_ID == 6)
#define RTE_UART4_RX 1
#define RTE_UART4_RX_PORT GPIOI
#define RTE_UART4_RX_BIT 9
#else
#error "Invalid UART4_RX Pin Configuration!"
#endif
// <o> UART4_CTS Pin <0=>Not Used <1=>PB0 <2=>PB15
#define RTE_UART4_CTS_ID 0
#if (RTE_UART4_CTS_ID == 0)
#define RTE_UART4_CTS 0
#elif (RTE_UART4_CTS_ID == 1)
#define RTE_UART4_CTS 1
#define RTE_UART4_CTS_PORT GPIOB
#define RTE_UART4_CTS_BIT 0
#elif (RTE_UART4_CTS_ID == 2)
#define RTE_UART4_CTS 1
#define RTE_UART4_CTS_PORT GPIOB
#define RTE_UART4_CTS_BIT 15
#else
#error "Invalid UART4_CTS Pin Configuration!"
#endif
// <o> UART4_RTS Pin <0=>Not Used <1=>PA15 <2=>PB14
#define RTE_UART4_RTS_ID 0
#if (RTE_UART4_RTS_ID == 0)
#define RTE_UART4_RTS 0
#elif (RTE_UART4_RTS_ID == 1)
#define RTE_UART4_RTS 1
#define RTE_UART4_RTS_PORT GPIOA
#define RTE_UART4_RTS_BIT 15
#elif (RTE_UART4_RTS_ID == 2)
#define RTE_UART4_RTS 1
#define RTE_UART4_RTS_PORT GPIOB
#define RTE_UART4_RTS_BIT 14
#else
#error "Invalid UART4_RTS Pin Configuration!"
#endif
// <e> DMA Rx
// <o1> Number <1=>1
// <i> Selects DMA Number (only DMA1 can be used)
// <o2> Stream <2=>2
// <i> Selects DMA Stream (only Stream 2 can be used)
// <o3> Channel <4=>4
// <i> Selects DMA Channel (only Channel 4 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_UART4_RX_DMA 0
#define RTE_UART4_RX_DMA_NUMBER 1
#define RTE_UART4_RX_DMA_STREAM 2
#define RTE_UART4_RX_DMA_CHANNEL 4
#define RTE_UART4_RX_DMA_PRIORITY 0
// <e> DMA Tx
// <o1> Number <1=>1
// <i> Selects DMA Number (only DMA1 can be used)
// <o2> Stream <4=>4
// <i> Selects DMA Stream (only Stream 4 can be used)
// <o3> Channel <4=>4
// <i> Selects DMA Channel (only Channel 4 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_UART4_TX_DMA 0
#define RTE_UART4_TX_DMA_NUMBER 1
#define RTE_UART4_TX_DMA_STREAM 4
#define RTE_UART4_TX_DMA_CHANNEL 4
#define RTE_UART4_TX_DMA_PRIORITY 0
// </e>
// <e> UART5 (Universal asynchronous receiver transmitter) [Driver_USART5]
// <i> Configuration settings for Driver_USART5 in component ::CMSIS Driver:USART
#define RTE_UART5 0
// <o> UART5_TX Pin <0=>Not Used <1=>PC12 <2=>PB6 <3=>PB9 <4=>PB13
#define RTE_UART5_TX_ID 0
#if (RTE_UART5_TX_ID == 0)
#define RTE_UART5_TX 0
#elif (RTE_UART5_TX_ID == 1)
#define RTE_UART5_TX 1
#define RTE_UART5_TX_PORT GPIOC
#define RTE_UART5_TX_BIT 12
#elif (RTE_UART5_TX_ID == 2)
#define RTE_UART5_TX 1
#define RTE_UART5_TX_PORT GPIOB
#define RTE_UART5_TX_BIT 6
#elif (RTE_UART5_TX_ID == 3)
#define RTE_UART5_TX 1
#define RTE_UART5_TX_PORT GPIOB
#define RTE_UART5_TX_BIT 9
#elif (RTE_UART5_TX_ID == 4)
#define RTE_UART5_TX 1
#define RTE_UART5_TX_PORT GPIOB
#define RTE_UART5_TX_BIT 13
#else
#error "Invalid UART5_TX Pin Configuration!"
#endif
// <o> UART5_RX Pin <0=>Not Used <1=>PD2 <2=>PB5 <3=>PB8 <4=>PB12
#define RTE_UART5_RX_ID 0
#if (RTE_UART5_RX_ID == 0)
#define RTE_UART5_RX 0
#elif (RTE_UART5_RX_ID == 1)
#define RTE_UART5_RX 1
#define RTE_UART5_RX_PORT GPIOD
#define RTE_UART5_RX_BIT 2
#elif (RTE_UART5_RX_ID == 2)
#define RTE_UART5_RX 1
#define RTE_UART5_RX_PORT GPIOB
#define RTE_UART5_RX_BIT 5
#elif (RTE_UART5_RX_ID == 3)
#define RTE_UART5_RX 1
#define RTE_UART5_RX_PORT GPIOB
#define RTE_UART5_RX_BIT 8
#elif (RTE_UART5_RX_ID == 4)
#define RTE_UART5_RX 1
#define RTE_UART5_RX_PORT GPIOB
#define RTE_UART5_RX_BIT 12
#else
#error "Invalid UART5_RX Pin Configuration!"
#endif
// <o> UART5_CTS Pin <0=>Not Used <1=>PC9
#define RTE_UART5_CTS_ID 0
#if (RTE_UART5_CTS_ID == 0)
#define RTE_UART5_CTS 0
#elif (RTE_UART5_CTS_ID == 1)
#define RTE_UART5_CTS 1
#define RTE_UART5_CTS_PORT GPIOC
#define RTE_UART5_CTS_BIT 9
#else
#error "Invalid UART5_CTS Pin Configuration!"
#endif
// <o> UART5_RTS Pin <0=>Not Used <1=>PC8
#define RTE_UART5_RTS_ID 0
#if (RTE_UART5_RTS_ID == 0)
#define RTE_UART5_RTS 0
#elif (RTE_UART5_RTS_ID == 1)
#define RTE_UART5_RTS 1
#define RTE_UART5_RTS_PORT GPIOC
#define RTE_UART5_RTS_BIT 8
#else
#error "Invalid UART5_RTS Pin Configuration!"
#endif
// <e> DMA Rx
// <o1> Number <1=>1
// <i> Selects DMA Number (only DMA1 can be used)
// <o2> Stream <0=>0
// <i> Selects DMA Stream (only Stream 0 can be used)
// <o3> Channel <4=>4
// <i> Selects DMA Channel (only Channel 4 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_UART5_RX_DMA 0
#define RTE_UART5_RX_DMA_NUMBER 1
#define RTE_UART5_RX_DMA_STREAM 0
#define RTE_UART5_RX_DMA_CHANNEL 4
#define RTE_UART5_RX_DMA_PRIORITY 0
// <e> DMA Tx
// <o1> Number <1=>1
// <i> Selects DMA Number (only DMA1 can be used)
// <o2> Stream <7=>7
// <i> Selects DMA Stream (only Stream 7 can be used)
// <o3> Channel <4=>4
// <i> Selects DMA Channel (only Channel 4 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_UART5_TX_DMA 0
#define RTE_UART5_TX_DMA_NUMBER 1
#define RTE_UART5_TX_DMA_STREAM 7
#define RTE_UART5_TX_DMA_CHANNEL 4
#define RTE_UART5_TX_DMA_PRIORITY 0
// </e>
// <e> USART6 (Universal synchronous asynchronous receiver transmitter) [Driver_USART6]
// <i> Configuration settings for Driver_USART6 in component ::CMSIS Driver:USART
#define RTE_USART6 0
// <o> USART6_TX Pin <0=>Not Used <1=>PC6 <2=>PG14
#define RTE_USART6_TX_ID 0
#if (RTE_USART6_TX_ID == 0)
#define RTE_USART6_TX 0
#elif (RTE_USART6_TX_ID == 1)
#define RTE_USART6_TX 1
#define RTE_USART6_TX_PORT GPIOC
#define RTE_USART6_TX_BIT 6
#elif (RTE_USART6_TX_ID == 2)
#define RTE_USART6_TX 1
#define RTE_USART6_TX_PORT GPIOG
#define RTE_USART6_TX_BIT 14
#else
#error "Invalid USART6_TX Pin Configuration!"
#endif
// <o> USART6_RX Pin <0=>Not Used <1=>PC7 <2=>PG9
#define RTE_USART6_RX_ID 0
#if (RTE_USART6_RX_ID == 0)
#define RTE_USART6_RX 0
#elif (RTE_USART6_RX_ID == 1)
#define RTE_USART6_RX 1
#define RTE_USART6_RX_PORT GPIOC
#define RTE_USART6_RX_BIT 7
#elif (RTE_USART6_RX_ID == 2)
#define RTE_USART6_RX 1
#define RTE_USART6_RX_PORT GPIOG
#define RTE_USART6_RX_BIT 9
#else
#error "Invalid USART6_RX Pin Configuration!"
#endif
// <o> USART6_CK Pin <0=>Not Used <1=>PC8 <2=>PG7
#define RTE_USART6_CK_ID 0
#if (RTE_USART6_CK_ID == 0)
#define RTE_USART6_CK 0
#elif (RTE_USART6_CK_ID == 1)
#define RTE_USART6_CK 1
#define RTE_USART6_CK_PORT GPIOC
#define RTE_USART6_CK_BIT 8
#elif (RTE_USART6_CK_ID == 2)
#define RTE_USART6_CK 1
#define RTE_USART6_CK_PORT GPIOG
#define RTE_USART6_CK_BIT 7
#else
#error "Invalid USART6_CK Pin Configuration!"
#endif
// <o> USART6_CTS Pin <0=>Not Used <1=>PG13 <2=>PG15
#define RTE_USART6_CTS_ID 0
#if (RTE_USART6_CTS_ID == 0)
#define RTE_USART6_CTS 0
#elif (RTE_USART6_CTS_ID == 1)
#define RTE_USART6_CTS 1
#define RTE_USART6_CTS_PORT GPIOG
#define RTE_USART6_CTS_BIT 13
#elif (RTE_USART6_CTS_ID == 2)
#define RTE_USART6_CTS 1
#define RTE_USART6_CTS_PORT GPIOG
#define RTE_USART6_CTS_BIT 15
#else
#error "Invalid USART6_CTS Pin Configuration!"
#endif
// <o> USART6_RTS Pin <0=>Not Used <1=>PG8 <2=>PG12
#define RTE_USART6_RTS_ID 0
#if (RTE_USART6_RTS_ID == 0)
#define RTE_USART6_RTS 0
#elif (RTE_USART6_RTS_ID == 1)
#define RTE_USART6_RTS 1
#define RTE_USART6_RTS_PORT GPIOG
#define RTE_USART6_RTS_BIT 8
#elif (RTE_USART6_RTS_ID == 2)
#define RTE_USART6_RTS 1
#define RTE_USART6_RTS_PORT GPIOG
#define RTE_USART6_RTS_BIT 12
#else
#error "Invalid USART6_RTS Pin Configuration!"
#endif
// <e> DMA Rx
// <o1> Number <2=>2
// <i> Selects DMA Number (only DMA2 can be used)
// <o2> Stream <1=>1 <2=>2
// <i> Selects DMA Stream (only Stream 1 or 2 can be used)
// <o3> Channel <5=>5
// <i> Selects DMA Channel (only Channel 5 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_USART6_RX_DMA 0
#define RTE_USART6_RX_DMA_NUMBER 2
#define RTE_USART6_RX_DMA_STREAM 1
#define RTE_USART6_RX_DMA_CHANNEL 5
#define RTE_USART6_RX_DMA_PRIORITY 0
// <e> DMA Tx
// <o1> Number <2=>2
// <i> Selects DMA Number (only DMA2 can be used)
// <o2> Stream <6=>6 <7=>7
// <i> Selects DMA Stream (only Stream 6 or 7 can be used)
// <o3> Channel <5=>5
// <i> Selects DMA Channel (only Channel 5 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_USART6_TX_DMA 0
#define RTE_USART6_TX_DMA_NUMBER 2
#define RTE_USART6_TX_DMA_STREAM 6
#define RTE_USART6_TX_DMA_CHANNEL 5
#define RTE_USART6_TX_DMA_PRIORITY 0
// </e>
// <e> UART7 (Universal asynchronous receiver transmitter) [Driver_USART7]
// <i> Configuration settings for Driver_USART7 in component ::CMSIS Driver:USART
#define RTE_UART7 0
// <o> UART7_TX Pin <0=>Not Used <1=>PF7 <2=>PE8 <3=>PA15 <4=>PB4
#define RTE_UART7_TX_ID 0
#if (RTE_UART7_TX_ID == 0)
#define RTE_UART7_TX 0
#elif (RTE_UART7_TX_ID == 1)
#define RTE_UART7_TX 1
#define RTE_UART7_TX_PORT GPIOF
#define RTE_UART7_TX_BIT 7
#elif (RTE_UART7_TX_ID == 2)
#define RTE_UART7_TX 1
#define RTE_UART7_TX_PORT GPIOE
#define RTE_UART7_TX_BIT 8
#elif (RTE_UART7_TX_ID == 3)
#define RTE_UART7_TX 1
#define RTE_UART7_TX_PORT GPIOA
#define RTE_UART7_TX_BIT 15
#elif (RTE_UART7_TX_ID == 4)
#define RTE_UART7_TX 1
#define RTE_UART7_TX_PORT GPIOB
#define RTE_UART7_TX_BIT 4
#else
#error "Invalid UART7_TX Pin Configuration!"
#endif
// <o> UART7_RX Pin <0=>Not Used <1=>PF6 <2=>PE7 <3=>PA8 <4=>PB3
#define RTE_UART7_RX_ID 0
#if (RTE_UART7_RX_ID == 0)
#define RTE_UART7_RX 0
#elif (RTE_UART7_RX_ID == 1)
#define RTE_UART7_RX 1
#define RTE_UART7_RX_PORT GPIOF
#define RTE_UART7_RX_BIT 6
#elif (RTE_UART7_RX_ID == 2)
#define RTE_UART7_RX 1
#define RTE_UART7_RX_PORT GPIOE
#define RTE_UART7_RX_BIT 7
#elif (RTE_UART7_RX_ID == 3)
#define RTE_UART7_RX 1
#define RTE_UART7_RX_PORT GPIOA
#define RTE_UART7_RX_BIT 8
#elif (RTE_UART7_RX_ID == 4)
#define RTE_UART7_RX 1
#define RTE_UART7_RX_PORT GPIOB
#define RTE_UART7_RX_BIT 3
#else
#error "Invalid UART7_RX Pin Configuration!"
#endif
// <o> UART7_CTS Pin <0=>Not Used <1=>PF9 <2=>PE10
#define RTE_UART7_CTS_ID 0
#if (RTE_UART7_CTS_ID == 0)
#define RTE_UART7_CTS 0
#elif (RTE_UART7_CTS_ID == 1)
#define RTE_UART7_CTS 1
#define RTE_UART7_CTS_PORT GPIOF
#define RTE_UART7_CTS_BIT 9
#elif (RTE_UART7_CTS_ID == 2)
#define RTE_UART7_CTS 1
#define RTE_UART7_CTS_PORT GPIOE
#define RTE_UART7_CTS_BIT 10
#else
#error "Invalid UART7_CTS Pin Configuration!"
#endif
// <o> UART7_RTS Pin <0=>Not Used <1=>PF8 <2=>PE9
#define RTE_UART7_RTS_ID 0
#if (RTE_UART7_RTS_ID == 0)
#define RTE_UART7_RTS 0
#elif (RTE_UART7_RTS_ID == 1)
#define RTE_UART7_RTS 1
#define RTE_UART7_RTS_PORT GPIOF
#define RTE_UART7_RTS_BIT 8
#elif (RTE_UART7_RTS_ID == 2)
#define RTE_UART7_RTS 1
#define RTE_UART7_RTS_PORT GPIOE
#define RTE_UART7_RTS_BIT 9
#else
#error "Invalid UART7_RTS Pin Configuration!"
#endif
// <e> DMA Rx
// <o1> Number <1=>1
// <i> Selects DMA Number (only DMA1 can be used)
// <o2> Stream <3=>3
// <i> Selects DMA Stream (only Stream 3 can be used)
// <o3> Channel <5=>5
// <i> Selects DMA Channel (only Channel 5 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_UART7_RX_DMA 0
#define RTE_UART7_RX_DMA_NUMBER 1
#define RTE_UART7_RX_DMA_STREAM 3
#define RTE_UART7_RX_DMA_CHANNEL 5
#define RTE_UART7_RX_DMA_PRIORITY 0
// <e> DMA Tx
// <o1> Number <1=>1
// <i> Selects DMA Number (only DMA1 can be used)
// <o2> Stream <1=>1
// <i> Selects DMA Stream (only Stream 1 can be used)
// <o3> Channel <5=>5
// <i> Selects DMA Channel (only Channel 5 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_UART7_TX_DMA 0
#define RTE_UART7_TX_DMA_NUMBER 1
#define RTE_UART7_TX_DMA_STREAM 1
#define RTE_UART7_TX_DMA_CHANNEL 5
#define RTE_UART7_TX_DMA_PRIORITY 0
// </e>
// <e> UART8 (Universal asynchronous receiver transmitter) [Driver_USART8]
// <i> Configuration settings for Driver_USART8 in component ::CMSIS Driver:USART
#define RTE_UART8 0
// <o> UART8_TX Pin <0=>Not Used <1=>PE1
#define RTE_UART8_TX_ID 0
#if (RTE_UART8_TX_ID == 0)
#define RTE_UART8_TX 0
#elif (RTE_UART8_TX_ID == 1)
#define RTE_UART8_TX 1
#define RTE_UART8_TX_PORT GPIOE
#define RTE_UART8_TX_BIT 1
#else
#error "Invalid UART8_TX Pin Configuration!"
#endif
// <o> UART8_RX Pin <0=>Not Used <1=>PE0
#define RTE_UART8_RX_ID 0
#if (RTE_UART8_RX_ID == 0)
#define RTE_UART8_RX 0
#elif (RTE_UART8_RX_ID == 1)
#define RTE_UART8_RX 1
#define RTE_UART8_RX_PORT GPIOE
#define RTE_UART8_RX_BIT 0
#else
#error "Invalid UART8_RX Pin Configuration!"
#endif
// <o> UART8_CTS Pin <0=>Not Used <1=>PD14
#define RTE_UART8_CTS_ID 0
#if (RTE_UART8_CTS_ID == 0)
#define RTE_UART8_CTS 0
#elif (RTE_UART8_CTS_ID == 1)
#define RTE_UART8_CTS 1
#define RTE_UART8_CTS_PORT GPIOD
#define RTE_UART8_CTS_BIT 14
#else
#error "Invalid UART8_CTS Pin Configuration!"
#endif
// <o> UART8_RTS Pin <0=>Not Used <1=>PD15
#define RTE_UART8_RTS_ID 0
#if (RTE_UART8_RTS_ID == 0)
#define RTE_UART8_RTS 0
#elif (RTE_UART8_RTS_ID == 1)
#define RTE_UART8_RTS 1
#define RTE_UART8_RTS_PORT GPIOD
#define RTE_UART8_RTS_BIT 15
#else
#error "Invalid UART8_RTS Pin Configuration!"
#endif
// <e> DMA Rx
// <o1> Number <1=>1
// <i> Selects DMA Number (only DMA1 can be used)
// <o2> Stream <6=>6
// <i> Selects DMA Stream (only Stream 6 can be used)
// <o3> Channel <5=>5
// <i> Selects DMA Channel (only Channel 5 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_UART8_RX_DMA 0
#define RTE_UART8_RX_DMA_NUMBER 1
#define RTE_UART8_RX_DMA_STREAM 6
#define RTE_UART8_RX_DMA_CHANNEL 5
#define RTE_UART8_RX_DMA_PRIORITY 0
// <e> DMA Tx
// <o1> Number <1=>1
// <i> Selects DMA Number (only DMA1 can be used)
// <o2> Stream <0=>0
// <i> Selects DMA Stream (only Stream 0 can be used)
// <o3> Channel <5=>5
// <i> Selects DMA Channel (only Channel 5 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_UART8_TX_DMA 0
#define RTE_UART8_TX_DMA_NUMBER 1
#define RTE_UART8_TX_DMA_STREAM 0
#define RTE_UART8_TX_DMA_CHANNEL 5
#define RTE_UART8_TX_DMA_PRIORITY 0
// </e>
// <e> I2C1 (Inter-integrated Circuit Interface 1) [Driver_I2C1]
// <i> Configuration settings for Driver_I2C1 in component ::CMSIS Driver:I2C
#define RTE_I2C1 0
// <o> I2C1_SCL Pin <0=>PB6 <1=>PB8
#define RTE_I2C1_SCL_PORT_ID 0
#if (RTE_I2C1_SCL_PORT_ID == 0)
#define RTE_I2C1_SCL_PORT GPIOB
#define RTE_I2C1_SCL_BIT 6
#elif (RTE_I2C1_SCL_PORT_ID == 1)
#define RTE_I2C1_SCL_PORT GPIOB
#define RTE_I2C1_SCL_BIT 8
#else
#error "Invalid I2C1_SCL Pin Configuration!"
#endif
// <o> I2C1_SDA Pin <0=>PB7 <1=>PB9
#define RTE_I2C1_SDA_PORT_ID 0
#if (RTE_I2C1_SDA_PORT_ID == 0)
#define RTE_I2C1_SDA_PORT GPIOB
#define RTE_I2C1_SDA_BIT 7
#elif (RTE_I2C1_SDA_PORT_ID == 1)
#define RTE_I2C1_SDA_PORT GPIOB
#define RTE_I2C1_SDA_BIT 9
#else
#error "Invalid I2C1_SDA Pin Configuration!"
#endif
// <e> DMA Rx
// <o1> Number <1=>1
// <i> Selects DMA Number (only DMA1 can be used)
// <o2> Stream <0=>0 <5=>5
// <i> Selects DMA Stream (only Stream 0 or 5 can be used)
// <o3> Channel <1=>1
// <i> Selects DMA Channel (only Channel 1 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_I2C1_RX_DMA 0
#define RTE_I2C1_RX_DMA_NUMBER 1
#define RTE_I2C1_RX_DMA_STREAM 0
#define RTE_I2C1_RX_DMA_CHANNEL 1
#define RTE_I2C1_RX_DMA_PRIORITY 0
// <e> DMA Tx
// <o1> Number <1=>1
// <i> Selects DMA Number (only DMA1 can be used)
// <o2> Stream <6=>6 <7=>7
// <i> Selects DMA Stream (only Stream 6 or 7 can be used)
// <o3> Channel <1=>1
// <i> Selects DMA Channel (only Channel 1 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_I2C1_TX_DMA 0
#define RTE_I2C1_TX_DMA_NUMBER 1
#define RTE_I2C1_TX_DMA_STREAM 6
#define RTE_I2C1_TX_DMA_CHANNEL 1
#define RTE_I2C1_TX_DMA_PRIORITY 0
// </e>
// <e> I2C2 (Inter-integrated Circuit Interface 2) [Driver_I2C2]
// <i> Configuration settings for Driver_I2C2 in component ::CMSIS Driver:I2C
#define RTE_I2C2 0
// <o> I2C2_SCL Pin <0=>PF1 <1=>PH4 <2=>PB10
#define RTE_I2C2_SCL_PORT_ID 0
#if (RTE_I2C2_SCL_PORT_ID == 0)
#define RTE_I2C2_SCL_PORT GPIOF
#define RTE_I2C2_SCL_BIT 1
#elif (RTE_I2C2_SCL_PORT_ID == 1)
#define RTE_I2C2_SCL_PORT GPIOH
#define RTE_I2C2_SCL_BIT 4
#elif (RTE_I2C2_SCL_PORT_ID == 2)
#define RTE_I2C2_SCL_PORT GPIOB
#define RTE_I2C2_SCL_BIT 10
#else
#error "Invalid I2C2_SCL Pin Configuration!"
#endif
// <o> I2C2_SDA Pin <0=>PF0 <1=>PH5 <2=>PB11 <3=>PB3 <4=>PB9
#define RTE_I2C2_SDA_PORT_ID 0
#if (RTE_I2C2_SDA_PORT_ID == 0)
#define RTE_I2C2_SDA_PORT GPIOF
#define RTE_I2C2_SDA_BIT 0
#elif (RTE_I2C2_SDA_PORT_ID == 1)
#define RTE_I2C2_SDA_PORT GPIOH
#define RTE_I2C2_SDA_BIT 5
#elif (RTE_I2C2_SDA_PORT_ID == 2)
#define RTE_I2C2_SDA_PORT GPIOB
#define RTE_I2C2_SDA_BIT 11
#elif (RTE_I2C2_SDA_PORT_ID == 3)
#define RTE_I2C2_SDA_PORT GPIOB
#define RTE_I2C2_SDA_BIT 3
#elif (RTE_I2C2_SDA_PORT_ID == 4)
#define RTE_I2C2_SDA_PORT GPIOB
#define RTE_I2C2_SDA_BIT 9
#else
#error "Invalid I2C2_SDA Pin Configuration!"
#endif
// <e> DMA Rx
// <o1> Number <1=>1
// <i> Selects DMA Number (only DMA1 can be used)
// <o2> Stream <2=>2 <3=>3
// <i> Selects DMA Stream (only Stream 2 or 3 can be used)
// <o3> Channel <7=>7
// <i> Selects DMA Channel (only Channel 7 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_I2C2_RX_DMA 0
#define RTE_I2C2_RX_DMA_NUMBER 1
#define RTE_I2C2_RX_DMA_STREAM 2
#define RTE_I2C2_RX_DMA_CHANNEL 7
#define RTE_I2C2_RX_DMA_PRIORITY 0
// <e> DMA Tx
// <o1> Number <1=>1
// <i> Selects DMA Number (only DMA1 can be used)
// <o2> Stream <7=>7
// <i> Selects DMA Stream (only Stream 7 can be used)
// <o3> Channel <7=>7
// <i> Selects DMA Channel (only Channel 1 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_I2C2_TX_DMA 0
#define RTE_I2C2_TX_DMA_NUMBER 1
#define RTE_I2C2_TX_DMA_STREAM 7
#define RTE_I2C2_TX_DMA_CHANNEL 7
#define RTE_I2C2_TX_DMA_PRIORITY 0
// </e>
// <e> I2C3 (Inter-integrated Circuit Interface 3) [Driver_I2C3]
// <i> Configuration settings for Driver_I2C3 in component ::CMSIS Driver:I2C
#define RTE_I2C3 1
// <o> I2C3_SCL Pin <0=>PH7 <1=>PA8
#define RTE_I2C3_SCL_PORT_ID 0
#if (RTE_I2C3_SCL_PORT_ID == 0)
#define RTE_I2C3_SCL_PORT GPIOH
#define RTE_I2C3_SCL_BIT 7
#elif (RTE_I2C3_SCL_PORT_ID == 1)
#define RTE_I2C3_SCL_PORT GPIOA
#define RTE_I2C3_SCL_BIT 8
#else
#error "Invalid I2C3_SCL Pin Configuration!"
#endif
// <o> I2C3_SDA Pin <0=>PH8 <1=>PC9 <2=>PB4 <3=>PB8
#define RTE_I2C3_SDA_PORT_ID 0
#if (RTE_I2C3_SDA_PORT_ID == 0)
#define RTE_I2C3_SDA_PORT GPIOH
#define RTE_I2C3_SDA_BIT 8
#elif (RTE_I2C3_SDA_PORT_ID == 1)
#define RTE_I2C3_SDA_PORT GPIOC
#define RTE_I2C3_SDA_BIT 9
#elif (RTE_I2C3_SDA_PORT_ID == 2)
#define RTE_I2C3_SDA_PORT GPIOB
#define RTE_I2C3_SDA_BIT 4
#elif (RTE_I2C3_SDA_PORT_ID == 3)
#define RTE_I2C3_SDA_PORT GPIOB
#define RTE_I2C3_SDA_BIT 8
#else
#error "Invalid I2C3_SDA Pin Configuration!"
#endif
// <e> DMA Rx
// <o1> Number <1=>1
// <i> Selects DMA Number (only DMA1 can be used)
// <o2> Stream <1=>1 <2=>2
// <i> Selects DMA Stream (only Stream 1 or 2 can be used)
// <o3> Channel <1=>1 <3=>3
// <i> Selects DMA Channel (only Channel 1 or 3 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_I2C3_RX_DMA 0
#define RTE_I2C3_RX_DMA_NUMBER 1
#define RTE_I2C3_RX_DMA_STREAM 2
#define RTE_I2C3_RX_DMA_CHANNEL 3
#define RTE_I2C3_RX_DMA_PRIORITY 0
// <e> DMA Tx
// <o1> Number <1=>1
// <i> Selects DMA Number (only DMA1 can be used)
// <o2> Stream <4=>4
// <i> Selects DMA Stream (only Stream 4 can be used)
// <o3> Channel <3=>3
// <i> Selects DMA Channel (only Channel 3 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_I2C3_TX_DMA 0
#define RTE_I2C3_TX_DMA_NUMBER 1
#define RTE_I2C3_TX_DMA_STREAM 4
#define RTE_I2C3_TX_DMA_CHANNEL 3
#define RTE_I2C3_TX_DMA_PRIORITY 0
// </e>
// <e> I2C4 (Inter-integrated Circuit Interface 4) [Driver_I2C4]
// <i> Configuration settings for Driver_I2C4 in component ::CMSIS Driver:I2C
#define RTE_I2C4 0
// <o> I2C4_SCL Pin <0=>PD12 <1=>PF14 <2=>PH11 <3=>PB6 <4=>PB8
#define RTE_I2C4_SCL_PORT_ID 0
#if (RTE_I2C4_SCL_PORT_ID == 0)
#define RTE_I2C4_SCL_PORT GPIOD
#define RTE_I2C4_SCL_BIT 12
#elif (RTE_I2C4_SCL_PORT_ID == 1)
#define RTE_I2C4_SCL_PORT GPIOF
#define RTE_I2C4_SCL_BIT 14
#elif (RTE_I2C4_SCL_PORT_ID == 2)
#define RTE_I2C4_SCL_PORT GPIOH
#define RTE_I2C4_SCL_BIT 11
#elif (RTE_I2C4_SCL_PORT_ID == 3)
#define RTE_I2C4_SCL_PORT GPIOB
#define RTE_I2C4_SCL_BIT 6
#elif (RTE_I2C4_SCL_PORT_ID == 4)
#define RTE_I2C4_SCL_PORT GPIOB
#define RTE_I2C4_SCL_BIT 8
#else
#error "Invalid I2C4_SCL Pin Configuration!"
#endif
// <o> I2C4_SDA Pin <0=>PD13 <1=>PF15 <2=>PH12 <3=>PB7 <4=>PB9
#define RTE_I2C4_SDA_PORT_ID 0
#if (RTE_I2C4_SDA_PORT_ID == 0)
#define RTE_I2C4_SDA_PORT GPIOD
#define RTE_I2C4_SDA_BIT 13
#elif (RTE_I2C4_SDA_PORT_ID == 1)
#define RTE_I2C4_SDA_PORT GPIOF
#define RTE_I2C4_SDA_BIT 15
#elif (RTE_I2C4_SDA_PORT_ID == 2)
#define RTE_I2C4_SDA_PORT GPIOH
#define RTE_I2C4_SDA_BIT 12
#elif (RTE_I2C4_SDA_PORT_ID == 3)
#define RTE_I2C4_SDA_PORT GPIOB
#define RTE_I2C4_SDA_BIT 7
#elif (RTE_I2C4_SDA_PORT_ID == 4)
#define RTE_I2C4_SDA_PORT GPIOB
#define RTE_I2C4_SDA_BIT 9
#else
#error "Invalid I2C4_SDA Pin Configuration!"
#endif
// <e> DMA Rx
// <o1> Number <1=>1
// <i> Selects DMA Number (only DMA1 can be used)
// <o2> Stream <2=>2
// <i> Selects DMA Stream (only Stream 2 can be used)
// <o3> Channel <2=>2
// <i> Selects DMA Channel (only Channel 2 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_I2C4_RX_DMA 0
#define RTE_I2C4_RX_DMA_NUMBER 1
#define RTE_I2C4_RX_DMA_STREAM 2
#define RTE_I2C4_RX_DMA_CHANNEL 3
#define RTE_I2C4_RX_DMA_PRIORITY 0
// <e> DMA Tx
// <o1> Number <1=>1
// <i> Selects DMA Number (only DMA1 can be used)
// <o2> Stream <5=>5
// <i> Selects DMA Stream (only Stream 5 can be used)
// <o3> Channel <2=>2
// <i> Selects DMA Channel (only Channel 2 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_I2C4_TX_DMA 0
#define RTE_I2C4_TX_DMA_NUMBER 1
#define RTE_I2C4_TX_DMA_STREAM 4
#define RTE_I2C4_TX_DMA_CHANNEL 3
#define RTE_I2C4_TX_DMA_PRIORITY 0
// </e>
// <e> SPI1 (Serial Peripheral Interface 1) [Driver_SPI1]
// <i> Configuration settings for Driver_SPI1 in component ::CMSIS Driver:SPI
#define RTE_SPI1 0
// <o> SPI1_MISO Pin <0=>Not Used <1=>PA6 <2=>PB4 <3=>PG9
#define RTE_SPI1_MISO_PORT_ID 0
#if (RTE_SPI1_MISO_PORT_ID == 0)
#define RTE_SPI1_MISO 0
#elif (RTE_SPI1_MISO_PORT_ID == 1)
#define RTE_SPI1_MISO 1
#define RTE_SPI1_MISO_PORT GPIOA
#define RTE_SPI1_MISO_BIT 6
#elif (RTE_SPI1_MISO_PORT_ID == 2)
#define RTE_SPI1_MISO 1
#define RTE_SPI1_MISO_PORT GPIOB
#define RTE_SPI1_MISO_BIT 4
#elif (RTE_SPI1_MISO_PORT_ID == 3)
#define RTE_SPI1_MISO 1
#define RTE_SPI1_MISO_PORT GPIOG
#define RTE_SPI1_MISO_BIT 9
#else
#error "Invalid SPI1_MISO Pin Configuration!"
#endif
// <o> SPI1_MOSI Pin <0=>Not Used <1=>PA7 <2=>PB5 <3=>PD7
#define RTE_SPI1_MOSI_PORT_ID 0
#if (RTE_SPI1_MOSI_PORT_ID == 0)
#define RTE_SPI1_MOSI 0
#elif (RTE_SPI1_MOSI_PORT_ID == 1)
#define RTE_SPI1_MOSI 1
#define RTE_SPI1_MOSI_PORT GPIOA
#define RTE_SPI1_MOSI_BIT 7
#elif (RTE_SPI1_MOSI_PORT_ID == 2)
#define RTE_SPI1_MOSI 1
#define RTE_SPI1_MOSI_PORT GPIOB
#define RTE_SPI1_MOSI_BIT 5
#elif (RTE_SPI1_MOSI_PORT_ID == 3)
#define RTE_SPI1_MOSI 1
#define RTE_SPI1_MOSI_PORT GPIOD
#define RTE_SPI1_MOSI_BIT 7
#else
#error "Invalid SPI1_MOSI Pin Configuration!"
#endif
// <o> SPI1_SCK Pin <0=>PA5 <1=>PB3 <2=>PG11
#define RTE_SPI1_SCL_PORT_ID 0
#if (RTE_SPI1_SCL_PORT_ID == 0)
#define RTE_SPI1_SCL_PORT GPIOA
#define RTE_SPI1_SCL_BIT 5
#elif (RTE_SPI1_SCL_PORT_ID == 1)
#define RTE_SPI1_SCL_PORT GPIOB
#define RTE_SPI1_SCL_BIT 3
#elif (RTE_SPI1_SCL_PORT_ID == 2)
#define RTE_SPI1_SCL_PORT GPIOG
#define RTE_SPI1_SCL_BIT 11
#else
#error "Invalid SPI1_SCK Pin Configuration!"
#endif
// <o> SPI1_NSS Pin <0=>Not Used <1=>PA4 <2=>PA15 <3=>PG10
#define RTE_SPI1_NSS_PORT_ID 0
#if (RTE_SPI1_NSS_PORT_ID == 0)
#define RTE_SPI1_NSS_PIN 0
#elif (RTE_SPI1_NSS_PORT_ID == 1)
#define RTE_SPI1_NSS_PIN 1
#define RTE_SPI1_NSS_PORT GPIOA
#define RTE_SPI1_NSS_BIT 4
#elif (RTE_SPI1_NSS_PORT_ID == 2)
#define RTE_SPI1_NSS_PIN 1
#define RTE_SPI1_NSS_PORT GPIOA
#define RTE_SPI1_NSS_BIT 15
#elif (RTE_SPI1_NSS_PORT_ID == 3)
#define RTE_SPI1_NSS_PIN 1
#define RTE_SPI1_NSS_PORT GPIOG
#define RTE_SPI1_NSS_BIT 10
#else
#error "Invalid SPI1_NSS Pin Configuration!"
#endif
// <e> DMA Rx
// <o1> Number <2=>2
// <i> Selects DMA Number (only DMA2 can be used)
// <o2> Stream <0=>0 <2=>2
// <i> Selects DMA Stream (only Stream 0 or 2 can be used)
// <o3> Channel <3=>3
// <i> Selects DMA Channel (only Channel 3 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_SPI1_RX_DMA 0
#define RTE_SPI1_RX_DMA_NUMBER 2
#define RTE_SPI1_RX_DMA_STREAM 0
#define RTE_SPI1_RX_DMA_CHANNEL 3
#define RTE_SPI1_RX_DMA_PRIORITY 0
// <e> DMA Tx
// <o1> Number <2=>2
// <i> Selects DMA Number (only DMA2 can be used)
// <o2> Stream <3=>3 <5=>5
// <i> Selects DMA Stream (only Stream 3 or 5 can be used)
// <o3> Channel <3=>3
// <i> Selects DMA Channel (only Channel 3 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_SPI1_TX_DMA 0
#define RTE_SPI1_TX_DMA_NUMBER 2
#define RTE_SPI1_TX_DMA_STREAM 5
#define RTE_SPI1_TX_DMA_CHANNEL 3
#define RTE_SPI1_TX_DMA_PRIORITY 0
// </e>
// <e> SPI2 (Serial Peripheral Interface 2) [Driver_SPI2]
// <i> Configuration settings for Driver_SPI2 in component ::CMSIS Driver:SPI
#define RTE_SPI2 0
// <o> SPI2_MISO Pin <0=>Not Used <1=>PB14 <2=>PC2 <3=>PI2
#define RTE_SPI2_MISO_PORT_ID 0
#if (RTE_SPI2_MISO_PORT_ID == 0)
#define RTE_SPI2_MISO 0
#elif (RTE_SPI2_MISO_PORT_ID == 1)
#define RTE_SPI2_MISO 1
#define RTE_SPI2_MISO_PORT GPIOB
#define RTE_SPI2_MISO_BIT 14
#elif (RTE_SPI2_MISO_PORT_ID == 2)
#define RTE_SPI2_MISO 1
#define RTE_SPI2_MISO_PORT GPIOC
#define RTE_SPI2_MISO_BIT 2
#elif (RTE_SPI2_MISO_PORT_ID == 3)
#define RTE_SPI2_MISO 1
#define RTE_SPI2_MISO_PORT GPIOI
#define RTE_SPI2_MISO_BIT 2
#else
#error "Invalid SPI2_MISO Pin Configuration!"
#endif
// <o> SPI2_MOSI Pin <0=>Not Used <1=>PB15 <2=>PC1 <3=>PC3 <4=>PI3 <5=>PB15
#define RTE_SPI2_MOSI_PORT_ID 0
#if (RTE_SPI2_MOSI_PORT_ID == 0)
#define RTE_SPI2_MOSI 0
#elif (RTE_SPI2_MOSI_PORT_ID == 1)
#define RTE_SPI2_MOSI 1
#define RTE_SPI2_MOSI_PORT GPIOB
#define RTE_SPI2_MOSI_BIT 15
#elif (RTE_SPI2_MOSI_PORT_ID == 2)
#define RTE_SPI2_MOSI 1
#define RTE_SPI2_MOSI_PORT GPIOC
#define RTE_SPI2_MOSI_BIT 1
#elif (RTE_SPI2_MOSI_PORT_ID == 3)
#define RTE_SPI2_MOSI 1
#define RTE_SPI2_MOSI_PORT GPIOC
#define RTE_SPI2_MOSI_BIT 3
#elif (RTE_SPI2_MOSI_PORT_ID == 4)
#define RTE_SPI2_MOSI 1
#define RTE_SPI2_MOSI_PORT GPIOI
#define RTE_SPI2_MOSI_BIT 3
#elif (RTE_SPI2_MOSI_PORT_ID == 5)
#define RTE_SPI2_MOSI 1
#define RTE_SPI2_MOSI_PORT GPIOB
#define RTE_SPI2_MOSI_BIT 15
#else
#error "Invalid SPI2_MOSI Pin Configuration!"
#endif
// <o> SPI2_SCK Pin <0=>PA9 <1=>PB10 <2=>PB13 <3=>PD3 <4=>PI1 <5=>PA12
#define RTE_SPI2_SCL_PORT_ID 0
#if (RTE_SPI2_SCL_PORT_ID == 0)
#define RTE_SPI2_SCL_PORT GPIOA
#define RTE_SPI2_SCL_BIT 9
#elif (RTE_SPI2_SCL_PORT_ID == 1)
#define RTE_SPI2_SCL_PORT GPIOB
#define RTE_SPI2_SCL_BIT 10
#elif (RTE_SPI2_SCL_PORT_ID == 2)
#define RTE_SPI2_SCL_PORT GPIOB
#define RTE_SPI2_SCL_BIT 13
#elif (RTE_SPI2_SCL_PORT_ID == 3)
#define RTE_SPI2_SCL_PORT GPIOD
#define RTE_SPI2_SCL_BIT 3
#elif (RTE_SPI2_SCL_PORT_ID == 4)
#define RTE_SPI2_SCL_PORT GPIOI
#define RTE_SPI2_SCL_BIT 1
#elif (RTE_SPI2_SCL_PORT_ID == 5)
#define RTE_SPI2_SCL_PORT GPIOA
#define RTE_SPI2_SCL_BIT 12
#else
#error "Invalid SPI2_SCK Pin Configuration!"
#endif
// <o> SPI2_NSS Pin <0=>Not Used <1=>PB4 <2=>PB9 <3=>PB12 <4=>PI0 <5=>PA11
#define RTE_SPI2_NSS_PORT_ID 0
#if (RTE_SPI2_NSS_PORT_ID == 0)
#define RTE_SPI2_NSS_PIN 0
#elif (RTE_SPI2_NSS_PORT_ID == 1)
#define RTE_SPI2_NSS_PIN 1
#define RTE_SPI2_NSS_PORT GPIOB
#define RTE_SPI2_NSS_BIT 4
#elif (RTE_SPI2_NSS_PORT_ID == 2)
#define RTE_SPI2_NSS_PIN 1
#define RTE_SPI2_NSS_PORT GPIOB
#define RTE_SPI2_NSS_BIT 9
#elif (RTE_SPI2_NSS_PORT_ID == 3)
#define RTE_SPI2_NSS_PIN 1
#define RTE_SPI2_NSS_PORT GPIOB
#define RTE_SPI2_NSS_BIT 12
#elif (RTE_SPI2_NSS_PORT_ID == 4)
#define RTE_SPI2_NSS_PIN 1
#define RTE_SPI2_NSS_PORT GPIOI
#define RTE_SPI2_NSS_BIT 0
#elif (RTE_SPI2_NSS_PORT_ID == 5)
#define RTE_SPI2_NSS_PIN 1
#define RTE_SPI2_NSS_PORT GPIOA
#define RTE_SPI2_NSS_BIT 11
#else
#error "Invalid SPI2_NSS Pin Configuration!"
#endif
// <e> DMA Rx
// <o1> Number <1=>1
// <i> Selects DMA Number (only DMA1 can be used)
// <o2> Stream <3=>3
// <i> Selects DMA Stream (only Stream 3 can be used)
// <o3> Channel <0=>0
// <i> Selects DMA Channel (only Channel 0 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_SPI2_RX_DMA 0
#define RTE_SPI2_RX_DMA_NUMBER 1
#define RTE_SPI2_RX_DMA_STREAM 3
#define RTE_SPI2_RX_DMA_CHANNEL 0
#define RTE_SPI2_RX_DMA_PRIORITY 0
// <e> DMA Tx
// <o1> Number <1=>1
// <i> Selects DMA Number (only DMA1 can be used)
// <o2> Stream <4=>4
// <i> Selects DMA Stream (only Stream 4 can be used)
// <o3> Channel <0=>0
// <i> Selects DMA Channel (only Channel 0 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_SPI2_TX_DMA 0
#define RTE_SPI2_TX_DMA_NUMBER 1
#define RTE_SPI2_TX_DMA_STREAM 4
#define RTE_SPI2_TX_DMA_CHANNEL 0
#define RTE_SPI2_TX_DMA_PRIORITY 0
// </e>
// <e> SPI3 (Serial Peripheral Interface 3) [Driver_SPI3]
// <i> Configuration settings for Driver_SPI3 in component ::CMSIS Driver:SPI
#define RTE_SPI3 0
// <o> SPI3_MISO Pin <0=>Not Used <1=>PB4 <2=>PC11
#define RTE_SPI3_MISO_PORT_ID 0
#if (RTE_SPI3_MISO_PORT_ID == 0)
#define RTE_SPI3_MISO 0
#elif (RTE_SPI3_MISO_PORT_ID == 1)
#define RTE_SPI3_MISO 1
#define RTE_SPI3_MISO_PORT GPIOB
#define RTE_SPI3_MISO_BIT 4
#elif (RTE_SPI3_MISO_PORT_ID == 2)
#define RTE_SPI3_MISO 1
#define RTE_SPI3_MISO_PORT GPIOC
#define RTE_SPI3_MISO_BIT 11
#else
#error "Invalid SPI3_MISO Pin Configuration!"
#endif
// <o> SPI3_MOSI Pin <0=>Not Used <1=>PB2 <2=>PB5 <3=>PC12 <4=>PD6
#define RTE_SPI3_MOSI_PORT_ID 0
#if (RTE_SPI3_MOSI_PORT_ID == 0)
#define RTE_SPI3_MOSI 0
#elif (RTE_SPI3_MOSI_PORT_ID == 1)
#define RTE_SPI3_MOSI 1
#define RTE_SPI3_MOSI_PORT GPIOB
#define RTE_SPI3_MOSI_BIT 2
#elif (RTE_SPI3_MOSI_PORT_ID == 2)
#define RTE_SPI3_MOSI 1
#define RTE_SPI3_MOSI_PORT GPIOB
#define RTE_SPI3_MOSI_BIT 5
#elif (RTE_SPI3_MOSI_PORT_ID == 3)
#define RTE_SPI3_MOSI 1
#define RTE_SPI3_MOSI_PORT GPIOC
#define RTE_SPI3_MOSI_BIT 12
#elif (RTE_SPI3_MOSI_PORT_ID == 4)
#define RTE_SPI3_MOSI 1
#define RTE_SPI3_MOSI_PORT GPIOD
#define RTE_SPI3_MOSI_BIT 6
#else
#error "Invalid SPI3_MOSI Pin Configuration!"
#endif
// <o> SPI3_SCK Pin <0=>PB3 <1=>PC10
#define RTE_SPI3_SCL_PORT_ID 0
#if (RTE_SPI3_SCL_PORT_ID == 0)
#define RTE_SPI3_SCL_PORT GPIOB
#define RTE_SPI3_SCL_BIT 3
#elif (RTE_SPI3_SCL_PORT_ID == 1)
#define RTE_SPI3_SCL_PORT GPIOC
#define RTE_SPI3_SCL_BIT 10
#else
#error "Invalid SPI3_SCK Pin Configuration!"
#endif
// <o> SPI3_NSS Pin <0=>Not Used <1=>PA4 <2=>PA15
#define RTE_SPI3_NSS_PORT_ID 0
#if (RTE_SPI3_NSS_PORT_ID == 0)
#define RTE_SPI3_NSS_PIN 0
#elif (RTE_SPI3_NSS_PORT_ID == 1)
#define RTE_SPI3_NSS_PIN 1
#define RTE_SPI3_NSS_PORT GPIOA
#define RTE_SPI3_NSS_BIT 4
#elif (RTE_SPI3_NSS_PORT_ID == 2)
#define RTE_SPI3_NSS_PIN 1
#define RTE_SPI3_NSS_PORT GPIOA
#define RTE_SPI3_NSS_BIT 15
#else
#error "Invalid SPI3_NSS Pin Configuration!"
#endif
// <e> DMA Rx
// <o1> Number <1=>1
// <i> Selects DMA Number (only DMA1 can be used)
// <o2> Stream <0=>0 <2=>2
// <i> Selects DMA Stream (only Stream 0 or 2 can be used)
// <o3> Channel <0=>0
// <i> Selects DMA Channel (only Channel 0 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_SPI3_RX_DMA 0
#define RTE_SPI3_RX_DMA_NUMBER 1
#define RTE_SPI3_RX_DMA_STREAM 0
#define RTE_SPI3_RX_DMA_CHANNEL 0
#define RTE_SPI3_RX_DMA_PRIORITY 0
// <e> DMA Tx
// <o1> Number <1=>1
// <i> Selects DMA Number (only DMA1 can be used)
// <o2> Stream <5=>5 <7=>7
// <i> Selects DMA Stream (only Stream 5 or 7 can be used)
// <o3> Channel <0=>0
// <i> Selects DMA Channel (only Channel 0 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_SPI3_TX_DMA 0
#define RTE_SPI3_TX_DMA_NUMBER 1
#define RTE_SPI3_TX_DMA_STREAM 5
#define RTE_SPI3_TX_DMA_CHANNEL 0
#define RTE_SPI3_TX_DMA_PRIORITY 0
// </e>
// <e> SPI4 (Serial Peripheral Interface 4) [Driver_SPI4]
// <i> Configuration settings for Driver_SPI4 in component ::CMSIS Driver:SPI
#define RTE_SPI4 0
// <o> SPI4_MISO Pin <0=>Not Used <1=>PE5 <2=>PE13
#define RTE_SPI4_MISO_PORT_ID 0
#if (RTE_SPI4_MISO_PORT_ID == 0)
#define RTE_SPI4_MISO 0
#elif (RTE_SPI4_MISO_PORT_ID == 1)
#define RTE_SPI4_MISO 1
#define RTE_SPI4_MISO_PORT GPIOE
#define RTE_SPI4_MISO_BIT 5
#elif (RTE_SPI4_MISO_PORT_ID == 2)
#define RTE_SPI4_MISO 1
#define RTE_SPI4_MISO_PORT GPIOE
#define RTE_SPI4_MISO_BIT 13
#else
#error "Invalid SPI4_MISO Pin Configuration!"
#endif
// <o> SPI4_MOSI Pin <0=>Not Used <1=>PE6 <2=>PE14
#define RTE_SPI4_MOSI_PORT_ID 0
#if (RTE_SPI4_MOSI_PORT_ID == 0)
#define RTE_SPI4_MOSI 0
#elif (RTE_SPI4_MOSI_PORT_ID == 1)
#define RTE_SPI4_MOSI 1
#define RTE_SPI4_MOSI_PORT GPIOE
#define RTE_SPI4_MOSI_BIT 6
#elif (RTE_SPI4_MOSI_PORT_ID == 2)
#define RTE_SPI4_MOSI 1
#define RTE_SPI4_MOSI_PORT GPIOE
#define RTE_SPI4_MOSI_BIT 14
#else
#error "Invalid SPI4_MOSI Pin Configuration!"
#endif
// <o> SPI4_SCK Pin <0=>PE2 <1=>PE12
#define RTE_SPI4_SCL_PORT_ID 0
#if (RTE_SPI4_SCL_PORT_ID == 0)
#define RTE_SPI4_SCL_PORT GPIOE
#define RTE_SPI4_SCL_BIT 2
#elif (RTE_SPI4_SCL_PORT_ID == 1)
#define RTE_SPI4_SCL_PORT GPIOE
#define RTE_SPI4_SCL_BIT 12
#else
#error "Invalid SPI4_SCK Pin Configuration!"
#endif
// <o> SPI4_NSS Pin <0=>Not Used <1=>PE4 <2=>PE11
#define RTE_SPI4_NSS_PORT_ID 0
#if (RTE_SPI4_NSS_PORT_ID == 0)
#define RTE_SPI4_NSS_PIN 0
#elif (RTE_SPI4_NSS_PORT_ID == 1)
#define RTE_SPI4_NSS_PIN 1
#define RTE_SPI4_NSS_PORT GPIOE
#define RTE_SPI4_NSS_BIT 4
#elif (RTE_SPI4_NSS_PORT_ID == 2)
#define RTE_SPI4_NSS_PIN 1
#define RTE_SPI4_NSS_PORT GPIOE
#define RTE_SPI4_NSS_BIT 11
#else
#error "Invalid SPI4_NSS Pin Configuration!"
#endif
// <e> DMA Rx
// <o1> Number <2=>2
// <i> Selects DMA Number (only DMA2 can be used)
// <o2> Stream <0=>0 <3=>3
// <i> Selects DMA Stream (only Stream 0 or 3 can be used)
// <o3> Channel <4=>4 <5=>5
// <i> Selects DMA Channel (only Channel 4 or 5 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_SPI4_RX_DMA 0
#define RTE_SPI4_RX_DMA_NUMBER 2
#define RTE_SPI4_RX_DMA_STREAM 0
#define RTE_SPI4_RX_DMA_CHANNEL 4
#define RTE_SPI4_RX_DMA_PRIORITY 0
// <e> DMA Tx
// <o1> Number <2=>2
// <i> Selects DMA Number (only DMA2 can be used)
// <o2> Stream <1=>1 <4=>4
// <i> Selects DMA Stream (only Stream 1 or 4 can be used)
// <o3> Channel <4=>4 <5=>5
// <i> Selects DMA Channel (only Channel 4 or 5 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_SPI4_TX_DMA 0
#define RTE_SPI4_TX_DMA_NUMBER 2
#define RTE_SPI4_TX_DMA_STREAM 1
#define RTE_SPI4_TX_DMA_CHANNEL 4
#define RTE_SPI4_TX_DMA_PRIORITY 0
// </e>
// <e> SPI5 (Serial Peripheral Interface 5) [Driver_SPI5]
// <i> Configuration settings for Driver_SPI5 in component ::CMSIS Driver:SPI
#define RTE_SPI5 0
// <o> SPI5_MISO Pin <0=>Not Used <1=>PF8 <2=>PH7
#define RTE_SPI5_MISO_PORT_ID 0
#if (RTE_SPI5_MISO_PORT_ID == 0)
#define RTE_SPI5_MISO 0
#elif (RTE_SPI5_MISO_PORT_ID == 1)
#define RTE_SPI5_MISO 1
#define RTE_SPI5_MISO_PORT GPIOF
#define RTE_SPI5_MISO_BIT 8
#elif (RTE_SPI5_MISO_PORT_ID == 2)
#define RTE_SPI5_MISO 1
#define RTE_SPI5_MISO_PORT GPIOH
#define RTE_SPI5_MISO_BIT 7
#else
#error "Invalid SPI5_MISO Pin Configuration!"
#endif
// <o> SPI5_MOSI Pin <0=>Not Used <1=>PF9 <2=>PF11
#define RTE_SPI5_MOSI_PORT_ID 0
#if (RTE_SPI5_MOSI_PORT_ID == 0)
#define RTE_SPI5_MOSI 0
#elif (RTE_SPI5_MOSI_PORT_ID == 1)
#define RTE_SPI5_MOSI 1
#define RTE_SPI5_MOSI_PORT GPIOF
#define RTE_SPI5_MOSI_BIT 9
#elif (RTE_SPI5_MOSI_PORT_ID == 2)
#define RTE_SPI5_MOSI 1
#define RTE_SPI5_MOSI_PORT GPIOF
#define RTE_SPI5_MOSI_BIT 11
#else
#error "Invalid SPI5_MOSI Pin Configuration!"
#endif
// <o> SPI5_SCK Pin <0=>PF7 <1=>PH6
#define RTE_SPI5_SCL_PORT_ID 0
#if (RTE_SPI5_SCL_PORT_ID == 0)
#define RTE_SPI5_SCL_PORT GPIOF
#define RTE_SPI5_SCL_BIT 7
#elif (RTE_SPI5_SCL_PORT_ID == 1)
#define RTE_SPI5_SCL_PORT GPIOH
#define RTE_SPI5_SCL_BIT 6
#else
#error "Invalid SPI5_SCK Pin Configuration!"
#endif
// <o> SPI5_NSS Pin <0=>Not Used <1=>PF6 <2=>PH5
#define RTE_SPI5_NSS_PORT_ID 0
#if (RTE_SPI5_NSS_PORT_ID == 0)
#define RTE_SPI5_NSS_PIN 0
#elif (RTE_SPI5_NSS_PORT_ID == 1)
#define RTE_SPI5_NSS_PIN 1
#define RTE_SPI5_NSS_PORT GPIOF
#define RTE_SPI5_NSS_BIT 6
#elif (RTE_SPI5_NSS_PORT_ID == 2)
#define RTE_SPI5_NSS_PIN 1
#define RTE_SPI5_NSS_PORT GPIOH
#define RTE_SPI5_NSS_BIT 5
#else
#error "Invalid SPI5_NSS Pin Configuration!"
#endif
// <e> DMA Rx
// <o1> Number <2=>2
// <i> Selects DMA Number (only DMA2 can be used)
// <o2> Stream <3=>3 <5=>5
// <i> Selects DMA Stream (only Stream 3 or 5 can be used)
// <o3> Channel <2=>2 <7=>7
// <i> Selects DMA Channel (only Channel 2 or 7 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_SPI5_RX_DMA 0
#define RTE_SPI5_RX_DMA_NUMBER 2
#define RTE_SPI5_RX_DMA_STREAM 3
#define RTE_SPI5_RX_DMA_CHANNEL 2
#define RTE_SPI5_RX_DMA_PRIORITY 0
// <e> DMA Tx
// <o1> Number <2=>2
// <i> Selects DMA Number (only DMA2 can be used)
// <o2> Stream <4=>4 <6=>6
// <i> Selects DMA Stream (only Stream 4 or 6 can be used)
// <o3> Channel <2=>2 <7=>7
// <i> Selects DMA Channel (only Channel 2 or 7 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_SPI5_TX_DMA 0
#define RTE_SPI5_TX_DMA_NUMBER 2
#define RTE_SPI5_TX_DMA_STREAM 4
#define RTE_SPI5_TX_DMA_CHANNEL 2
#define RTE_SPI5_TX_DMA_PRIORITY 0
// </e>
// <e> SPI6 (Serial Peripheral Interface 6) [Driver_SPI6]
// <i> Configuration settings for Driver_SPI6 in component ::CMSIS Driver:SPI
#define RTE_SPI6 0
// <o> SPI6_MISO Pin <0=>Not Used <1=>PG12 <2=>PA6 <3=>PB4
#define RTE_SPI6_MISO_PORT_ID 0
#if (RTE_SPI6_MISO_PORT_ID == 0)
#define RTE_SPI6_MISO 0
#elif (RTE_SPI6_MISO_PORT_ID == 1)
#define RTE_SPI6_MISO 1
#define RTE_SPI6_MISO_PORT GPIOG
#define RTE_SPI6_MISO_BIT 12
#elif (RTE_SPI6_MISO_PORT_ID == 2)
#define RTE_SPI6_MISO 1
#define RTE_SPI6_MISO_PORT GPIOA
#define RTE_SPI6_MISO_BIT 6
#elif (RTE_SPI6_MISO_PORT_ID == 3)
#define RTE_SPI6_MISO 1
#define RTE_SPI6_MISO_PORT GPIOB
#define RTE_SPI6_MISO_BIT 4
#else
#error "Invalid SPI6_MISO Pin Configuration!"
#endif
// <o> SPI6_MOSI Pin <0=>Not Used <1=>PG14 <2=>PA7 <3=>PB5
#define RTE_SPI6_MOSI_PORT_ID 0
#if (RTE_SPI6_MOSI_PORT_ID == 0)
#define RTE_SPI6_MOSI 0
#elif (RTE_SPI6_MOSI_PORT_ID == 1)
#define RTE_SPI6_MOSI 1
#define RTE_SPI6_MOSI_PORT GPIOG
#define RTE_SPI6_MOSI_BIT 14
#elif (RTE_SPI6_MOSI_PORT_ID == 2)
#define RTE_SPI6_MOSI 1
#define RTE_SPI6_MOSI_PORT GPIOA
#define RTE_SPI6_MOSI_BIT 7
#elif (RTE_SPI6_MOSI_PORT_ID == 3)
#define RTE_SPI6_MOSI 1
#define RTE_SPI6_MOSI_PORT GPIOB
#define RTE_SPI6_MOSI_BIT 5
#else
#error "Invalid SPI6_MOSI Pin Configuration!"
#endif
// <o> SPI6_SCK Pin <0=>PG13 <1=>PA5 <2=>PB3
#define RTE_SPI6_SCL_PORT_ID 0
#if (RTE_SPI6_SCL_PORT_ID == 0)
#define RTE_SPI6_SCL_PORT GPIOG
#define RTE_SPI6_SCL_BIT 13
#elif (RTE_SPI6_SCL_PORT_ID == 1)
#define RTE_SPI6_SCL_PORT GPIOA
#define RTE_SPI6_SCL_BIT 5
#elif (RTE_SPI6_SCL_PORT_ID == 2)
#define RTE_SPI6_SCL_PORT GPIOB
#define RTE_SPI6_SCL_BIT 3
#else
#error "Invalid SPI6_SCK Pin Configuration!"
#endif
// <o> SPI6_NSS Pin <0=>Not Used <1=>PG8 <2=>PA4 <3=>PA15
#define RTE_SPI6_NSS_PORT_ID 0
#if (RTE_SPI6_NSS_PORT_ID == 0)
#define RTE_SPI6_NSS_PIN 0
#elif (RTE_SPI6_NSS_PORT_ID == 1)
#define RTE_SPI6_NSS_PIN 1
#define RTE_SPI6_NSS_PORT GPIOG
#define RTE_SPI6_NSS_BIT 8
#elif (RTE_SPI6_NSS_PORT_ID == 2)
#define RTE_SPI6_NSS_PIN 1
#define RTE_SPI6_NSS_PORT GPIOA
#define RTE_SPI6_NSS_BIT 4
#elif (RTE_SPI6_NSS_PORT_ID == 3)
#define RTE_SPI6_NSS_PIN 1
#define RTE_SPI6_NSS_PORT GPIOA
#define RTE_SPI6_NSS_BIT 15
#else
#error "Invalid SPI6_NSS Pin Configuration!"
#endif
// <e> DMA Rx
// <o1> Number <2=>2
// <i> Selects DMA Number (only DMA2 can be used)
// <o2> Stream <6=>6
// <i> Selects DMA Stream (only Stream 6 can be used)
// <o3> Channel <1=>1
// <i> Selects DMA Channel (only Channel 1 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_SPI6_RX_DMA 0
#define RTE_SPI6_RX_DMA_NUMBER 2
#define RTE_SPI6_RX_DMA_STREAM 6
#define RTE_SPI6_RX_DMA_CHANNEL 1
#define RTE_SPI6_RX_DMA_PRIORITY 0
// <e> DMA Tx
// <o1> Number <2=>2
// <i> Selects DMA Number (only DMA2 can be used)
// <o2> Stream <5=>5
// <i> Selects DMA Stream (only Stream 5 can be used)
// <o3> Channel <1=>1
// <i> Selects DMA Channel (only Channel 1 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_SPI6_TX_DMA 0
#define RTE_SPI6_TX_DMA_NUMBER 2
#define RTE_SPI6_TX_DMA_STREAM 5
#define RTE_SPI6_TX_DMA_CHANNEL 1
#define RTE_SPI6_TX_DMA_PRIORITY 0
// </e>
// <e> SAI1 (Serial Audio Interface 1) [Driver_SAI1]
// <i> Configuration settings for Driver_SAI1 in component ::CMSIS Driver:SAI
#define RTE_SAI1 0
// <o> SAI1_SD_A Pin <0=>Not Used <1=>PB2 <2=>PC1 <3=>PD6 <4=>PE6
#define RTE_SAI1_SD_A_PORT_ID 0
#if (RTE_SAI1_SD_A_PORT_ID == 0)
#define RTE_SAI1_SD_A_PIN 0
#elif (RTE_SAI1_SD_A_PORT_ID == 1)
#define RTE_SAI1_SD_A_PIN 1
#define RTE_SAI1_SD_A_PORT GPIOB
#define RTE_SAI1_SD_A_BIT 2
#elif (RTE_SAI1_SD_A_PORT_ID == 2)
#define RTE_SAI1_SD_A_PIN 1
#define RTE_SAI1_SD_A_PORT GPIOC
#define RTE_SAI1_SD_A_BIT 1
#elif (RTE_SAI1_SD_A_PORT_ID == 3)
#define RTE_SAI1_SD_A_PIN 1
#define RTE_SAI1_SD_A_PORT GPIOD
#define RTE_SAI1_SD_A_BIT 6
#elif (RTE_SAI1_SD_A_PORT_ID == 4)
#define RTE_SAI1_SD_A_PIN 1
#define RTE_SAI1_SD_A_PORT GPIOE
#define RTE_SAI1_SD_A_BIT 6
#else
#error "Invalid SAI1_SD_A Pin Configuration!"
#endif
// <o> SAI1_FS_A Pin <0=>Not Used <1=>PE4
#define RTE_SAI1_FS_A_PORT_ID 0
#if (RTE_SAI1_FS_A_PORT_ID == 0)
#define RTE_SAI1_FS_A_PIN 0
#elif (RTE_SAI1_FS_A_PORT_ID == 1)
#define RTE_SAI1_FS_A_PIN 1
#define RTE_SAI1_FS_A_PORT GPIOE
#define RTE_SAI1_FS_A_BIT 4
#else
#error "Invalid SAI1_FS_A Pin Configuration!"
#endif
// <o> SAI1_SCK_A Pin <0=>Not Used <1=>PE5
#define RTE_SAI1_SCK_A_PORT_ID 0
#if (RTE_SAI1_SCK_A_PORT_ID == 0)
#define RTE_SAI1_SCK_A_PIN 0
#elif (RTE_SAI1_SCK_A_PORT_ID == 1)
#define RTE_SAI1_SCK_A_PIN 1
#define RTE_SAI1_SCK_A_PORT GPIOE
#define RTE_SAI1_SCK_A_BIT 5
#else
#error "Invalid SAI1_SCK_A Pin Configuration!"
#endif
// <o> SAI1_MCLK_A Pin <0=>Not Used <1=>PE2 <2=>PG7
#define RTE_SAI1_MCLK_A_PORT_ID 0
#if (RTE_SAI1_MCLK_A_PORT_ID == 0)
#define RTE_SAI1_MCLK_A_PIN 0
#elif (RTE_SAI1_MCLK_A_PORT_ID == 1)
#define RTE_SAI1_MCLK_A_PIN 1
#define RTE_SAI1_MCLK_A_PORT GPIOE
#define RTE_SAI1_MCLK_A_BIT 2
#elif (RTE_SAI1_MCLK_A_PORT_ID == 2)
#define RTE_SAI1_MCLK_A_PIN 1
#define RTE_SAI1_MCLK_A_PORT GPIOG
#define RTE_SAI1_MCLK_A_BIT 7
#else
#error "Invalid SAI1_MCLK_A Pin Configuration!"
#endif
// <o> SAI1_SD_B Pin <0=>Not Used <1=>PE3 <2=>PF6
#define RTE_SAI1_SD_B_PORT_ID 0
#if (RTE_SAI1_SD_B_PORT_ID == 0)
#define RTE_SAI1_SD_B_PIN 0
#elif (RTE_SAI1_SD_B_PORT_ID == 1)
#define RTE_SAI1_SD_B_PIN 1
#define RTE_SAI1_SD_B_PORT GPIOE
#define RTE_SAI1_SD_B_BIT 3
#elif (RTE_SAI1_SD_B_PORT_ID == 2)
#define RTE_SAI1_SD_B_PIN 1
#define RTE_SAI1_SD_B_PORT GPIOF
#define RTE_SAI1_SD_B_BIT 6
#else
#error "Invalid SAI1_SD_B Pin Configuration!"
#endif
// <o> SAI1_FS_B Pin <0=>Not Used <1=>PF9
#define RTE_SAI1_FS_B_PORT_ID 0
#if (RTE_SAI1_FS_B_PORT_ID == 0)
#define RTE_SAI1_FS_B_PIN 0
#elif (RTE_SAI1_FS_B_PORT_ID == 1)
#define RTE_SAI1_FS_B_PIN 1
#define RTE_SAI1_FS_B_PORT GPIOF
#define RTE_SAI1_FS_B_BIT 9
#else
#error "Invalid SAI1_FS_B Pin Configuration!"
#endif
// <o> SAI1_SCK_B Pin <0=>Not Used <1=>PF8
#define RTE_SAI1_SCK_B_PORT_ID 0
#if (RTE_SAI1_SCK_B_PORT_ID == 0)
#define RTE_SAI1_SCK_B_PIN 0
#elif (RTE_SAI1_SCK_B_PORT_ID == 1)
#define RTE_SAI1_SCK_B_PIN 1
#define RTE_SAI1_SCK_B_PORT GPIOF
#define RTE_SAI1_SCK_B_BIT 8
#else
#error "Invalid SAI1_SCK_B Pin Configuration!"
#endif
// <o> SAI1_MCLK_B Pin <0=>Not Used <1=>PF7
#define RTE_SAI1_MCLK_B_PORT_ID 0
#if (RTE_SAI1_MCLK_B_PORT_ID == 0)
#define RTE_SAI1_MCLK_B_PIN 0
#elif (RTE_SAI1_MCLK_B_PORT_ID == 1)
#define RTE_SAI1_MCLK_B_PIN 1
#define RTE_SAI1_MCLK_B_PORT GPIOF
#define RTE_SAI1_MCLK_B_BIT 7
#else
#error "Invalid SAI1_MCLK_B Pin Configuration!"
#endif
// <e> DMA SAI1_A
// <o1> Number <2=>2
// <i> Selects DMA Number (only DMA2 can be used)
// <o2> Stream <1=>1 <3=>3
// <i> Selects DMA Stream (only Stream 1 or 3 can be used)
// <o3> Channel <0=>0
// <i> Selects DMA Channel (only Channel 0 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_SAI1_A_DMA 0
#define RTE_SAI1_A_DMA_NUMBER 2
#define RTE_SAI1_A_DMA_STREAM 1
#define RTE_SAI1_A_DMA_CHANNEL 0
#define RTE_SAI1_A_DMA_PRIORITY 0
// <e> DMA SAI1_B
// <o1> Number <2=>2
// <i> Selects DMA Number (only DMA2 can be used)
// <o2> Stream <4=>4 <5=>5 <7=>7
// <i> Selects DMA Stream (only Stream 4, 5 or 7 can be used)
// <o3> Channel <0=>0 <1=>1
// <i> Selects DMA Channel (only Channel 0 or 1 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_SAI1_B_DMA 0
#define RTE_SAI1_B_DMA_NUMBER 2
#define RTE_SAI1_B_DMA_STREAM 5
#define RTE_SAI1_B_DMA_CHANNEL 0
#define RTE_SAI1_B_DMA_PRIORITY 0
// </e>
// <e> SAI2 (Serial Audio Interface 2) [Driver_SAI2]
// <i> Configuration settings for Driver_SAI2 in component ::CMSIS Driver:SAI
#define RTE_SAI2 1
// <o> SAI2_SD_A Pin <0=>Not Used <1=>PD11 <2=>PI6
#define RTE_SAI2_SD_A_PORT_ID 2
#if (RTE_SAI2_SD_A_PORT_ID == 0)
#define RTE_SAI2_SD_A_PIN 0
#elif (RTE_SAI2_SD_A_PORT_ID == 1)
#define RTE_SAI2_SD_A_PIN 1
#define RTE_SAI2_SD_A_PORT GPIOD
#define RTE_SAI2_SD_A_BIT 11
#elif (RTE_SAI2_SD_A_PORT_ID == 2)
#define RTE_SAI2_SD_A_PIN 1
#define RTE_SAI2_SD_A_PORT GPIOI
#define RTE_SAI2_SD_A_BIT 6
#else
#error "Invalid SAI2_SD_A Pin Configuration!"
#endif
// <o> SAI2_FS_A Pin <0=>Not Used <1=>PD12 <2=>PI7
#define RTE_SAI2_FS_A_PORT_ID 2
#if (RTE_SAI2_FS_A_PORT_ID == 0)
#define RTE_SAI2_FS_A_PIN 0
#elif (RTE_SAI2_FS_A_PORT_ID == 1)
#define RTE_SAI2_FS_A_PIN 1
#define RTE_SAI2_FS_A_PORT GPIOD
#define RTE_SAI2_FS_A_BIT 12
#elif (RTE_SAI2_FS_A_PORT_ID == 2)
#define RTE_SAI2_FS_A_PIN 1
#define RTE_SAI2_FS_A_PORT GPIOI
#define RTE_SAI2_FS_A_BIT 7
#else
#error "Invalid SAI2_FS_A Pin Configuration!"
#endif
// <o> SAI2_SCK_A Pin <0=>Not Used <1=>PD13 <2=>PI5
#define RTE_SAI2_SCK_A_PORT_ID 2
#if (RTE_SAI2_SCK_A_PORT_ID == 0)
#define RTE_SAI2_SCK_A_PIN 0
#elif (RTE_SAI2_SCK_A_PORT_ID == 1)
#define RTE_SAI2_SCK_A_PIN 1
#define RTE_SAI2_SCK_A_PORT GPIOD
#define RTE_SAI2_SCK_A_BIT 13
#elif (RTE_SAI2_SCK_A_PORT_ID == 2)
#define RTE_SAI2_SCK_A_PIN 1
#define RTE_SAI2_SCK_A_PORT GPIOI
#define RTE_SAI2_SCK_A_BIT 5
#else
#error "Invalid SAI2_SCK_A Pin Configuration!"
#endif
// <o> SAI2_MCLK_A Pin <0=>Not Used <1=>PE0 <2=>PI4
#define RTE_SAI2_MCLK_A_PORT_ID 2
#if (RTE_SAI2_MCLK_A_PORT_ID == 0)
#define RTE_SAI2_MCLK_A_PIN 0
#elif (RTE_SAI2_MCLK_A_PORT_ID == 1)
#define RTE_SAI2_MCLK_A_PIN 1
#define RTE_SAI2_MCLK_A_PORT GPIOE
#define RTE_SAI2_MCLK_A_BIT 0
#elif (RTE_SAI2_MCLK_A_PORT_ID == 2)
#define RTE_SAI2_MCLK_A_PIN 1
#define RTE_SAI2_MCLK_A_PORT GPIOI
#define RTE_SAI2_MCLK_A_BIT 4
#else
#error "Invalid SAI2_MCLK_A Pin Configuration!"
#endif
// <o> SAI2_SD_B Pin <0=>Not Used <1=>PA0 <2=>PE11 <3=>PF11 <4=>PG10
#define RTE_SAI2_SD_B_PORT_ID 4
#if (RTE_SAI2_SD_B_PORT_ID == 0)
#define RTE_SAI2_SD_B_PIN 0
#elif (RTE_SAI2_SD_B_PORT_ID == 1)
#define RTE_SAI2_SD_B_PIN 1
#define RTE_SAI2_SD_B_PORT GPIOA
#define RTE_SAI2_SD_B_BIT 0
#elif (RTE_SAI2_SD_B_PORT_ID == 2)
#define RTE_SAI2_SD_B_PIN 1
#define RTE_SAI2_SD_B_PORT GPIOE
#define RTE_SAI2_SD_B_BIT 11
#elif (RTE_SAI2_SD_B_PORT_ID == 3)
#define RTE_SAI2_SD_B_PIN 1
#define RTE_SAI2_SD_B_PORT GPIOF
#define RTE_SAI2_SD_B_BIT 11
#elif (RTE_SAI2_SD_B_PORT_ID == 4)
#define RTE_SAI2_SD_B_PIN 1
#define RTE_SAI2_SD_B_PORT GPIOG
#define RTE_SAI2_SD_B_BIT 10
#else
#error "Invalid SAI2_SD_B Pin Configuration!"
#endif
// <o> SAI2_FS_B Pin <0=>Not Used <1=>PA12 <2=>PC0 <3=>PE13 <4=>PG9
#define RTE_SAI2_FS_B_PORT_ID 0
#if (RTE_SAI2_FS_B_PORT_ID == 0)
#define RTE_SAI2_FS_B_PIN 0
#elif (RTE_SAI2_FS_B_PORT_ID == 1)
#define RTE_SAI2_FS_B_PIN 1
#define RTE_SAI2_FS_B_PORT GPIOA
#define RTE_SAI2_FS_B_BIT 12
#elif (RTE_SAI2_FS_B_PORT_ID == 2)
#define RTE_SAI2_FS_B_PIN 1
#define RTE_SAI2_FS_B_PORT GPIOC
#define RTE_SAI2_FS_B_BIT 0
#elif (RTE_SAI2_FS_B_PORT_ID == 3)
#define RTE_SAI2_FS_B_PIN 1
#define RTE_SAI2_FS_B_PORT GPIOE
#define RTE_SAI2_FS_B_BIT 13
#elif (RTE_SAI2_FS_B_PORT_ID == 4)
#define RTE_SAI2_FS_B_PIN 1
#define RTE_SAI2_FS_B_PORT GPIOG
#define RTE_SAI2_FS_B_BIT 9
#else
#error "Invalid SAI2_FS_B Pin Configuration!"
#endif
// <o> SAI2_SCK_B Pin <0=>Not Used <1=>PA2 <2=>PE12 <3=>PH2
#define RTE_SAI2_SCK_B_PORT_ID 0
#if (RTE_SAI2_SCK_B_PORT_ID == 0)
#define RTE_SAI2_SCK_B_PIN 0
#elif (RTE_SAI2_SCK_B_PORT_ID == 1)
#define RTE_SAI2_SCK_B_PIN 1
#define RTE_SAI2_SCK_B_PORT GPIOA
#define RTE_SAI2_SCK_B_BIT 2
#elif (RTE_SAI2_SCK_B_PORT_ID == 2)
#define RTE_SAI2_SCK_B_PIN 1
#define RTE_SAI2_SCK_B_PORT GPIOE
#define RTE_SAI2_SCK_B_BIT 12
#elif (RTE_SAI2_SCK_B_PORT_ID == 3)
#define RTE_SAI2_SCK_B_PIN 1
#define RTE_SAI2_SCK_B_PORT GPIOH
#define RTE_SAI2_SCK_B_BIT 2
#else
#error "Invalid SAI2_SCK_B Pin Configuration!"
#endif
// <o> SAI2_MCLK_B Pin <0=>Not Used <1=>PA1 <2=>PE6 <3=>PE14 <4=>PH3
#define RTE_SAI2_MCLK_B_PORT_ID 0
#if (RTE_SAI2_MCLK_B_PORT_ID == 0)
#define RTE_SAI2_MCLK_B_PIN 0
#elif (RTE_SAI2_MCLK_B_PORT_ID == 1)
#define RTE_SAI2_MCLK_B_PIN 1
#define RTE_SAI2_MCLK_B_PORT GPIOA
#define RTE_SAI2_MCLK_B_BIT 1
#elif (RTE_SAI2_MCLK_B_PORT_ID == 2)
#define RTE_SAI2_MCLK_B_PIN 1
#define RTE_SAI2_MCLK_B_PORT GPIOE
#define RTE_SAI2_MCLK_B_BIT 6
#elif (RTE_SAI2_MCLK_B_PORT_ID == 3)
#define RTE_SAI2_MCLK_B_PIN 1
#define RTE_SAI2_MCLK_B_PORT GPIOE
#define RTE_SAI2_MCLK_B_BIT 14
#elif (RTE_SAI2_MCLK_B_PORT_ID == 4)
#define RTE_SAI2_MCLK_B_PIN 1
#define RTE_SAI2_MCLK_B_PORT GPIOH
#define RTE_SAI2_MCLK_B_BIT 3
#else
#error "Invalid SAI2_MCLK_B Pin Configuration!"
#endif
// <e> DMA SAI2_A
// <o1> Number <2=>2
// <i> Selects DMA Number (only DMA2 can be used)
// <o2> Stream <4=>4
// <i> Selects DMA Stream (only Stream 4 can be used)
// <o3> Channel <3=>3
// <i> Selects DMA Channel (only Channel 3 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_SAI2_A_DMA 1
#define RTE_SAI2_A_DMA_NUMBER 2
#define RTE_SAI2_A_DMA_STREAM 4
#define RTE_SAI2_A_DMA_CHANNEL 3
#define RTE_SAI2_A_DMA_PRIORITY 0
// <e> DMA SAI2_B
// <o1> Number <2=>2
// <i> Selects DMA Number (only DMA2 can be used)
// <o2> Stream <6=>6 <7=>7
// <i> Selects DMA Stream (only Stream 6 or 7 can be used)
// <o3> Channel <0=>0 <3=>3
// <i> Selects DMA Channel (only Channel 0 or 3 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_SAI2_B_DMA 1
#define RTE_SAI2_B_DMA_NUMBER 2
#define RTE_SAI2_B_DMA_STREAM 7
#define RTE_SAI2_B_DMA_CHANNEL 0
#define RTE_SAI2_B_DMA_PRIORITY 0
// </e>
// <e> SDMMC1 (SD/SDIO/MMC card host interface 1) [Driver_MCI0]
// <i> Configuration settings for Driver_MCI0 in component ::CMSIS Driver:MCI
#define RTE_SDMMC1 0
// <h> SDMMC Peripheral Bus
// <o> SDMMC1_CK Pin <0=>PC12
#define RTE_SDMMC1_CK_PORT_ID 0
#if (RTE_SDMMC1_CK_PORT_ID == 0)
#define RTE_SDMMC1_CK_PORT GPIOC
#define RTE_SDMMC1_CK_PIN GPIO_PIN_12
#else
#error "Invalid SDMMC1_CLK Pin Configuration!"
#endif
// <o> SDMMC1_CMD Pin <0=>PD2
#define RTE_SDMMC1_CMD_PORT_ID 0
#if (RTE_SDMMC1_CMD_PORT_ID == 0)
#define RTE_SDMMC1_CMD_PORT GPIOD
#define RTE_SDMMC1_CMD_PIN GPIO_PIN_2
#else
#error "Invalid SDMMC1_CMD Pin Configuration!"
#endif
// <o> SDMMC1_D0 Pin <0=>PC8
#define RTE_SDMMC1_D0_PORT_ID 0
#if (RTE_SDMMC1_D0_PORT_ID == 0)
#define RTE_SDMMC1_D0_PORT GPIOC
#define RTE_SDMMC1_D0_PIN GPIO_PIN_8
#else
#error "Invalid SDMMC1_D0 Pin Configuration!"
#endif
// <e> SDMMC1_D[1 .. 3]
#define RTE_SDMMC1_BUS_WIDTH_4 1
// <o> SDMMC1_D1 Pin <0=>PC9
#define RTE_SDMMC1_D1_PORT_ID 0
#if (RTE_SDMMC1_D1_PORT_ID == 0)
#define RTE_SDMMC1_D1_PORT GPIOC
#define RTE_SDMMC1_D1_PIN GPIO_PIN_9
#else
#error "Invalid SDMMC1_D1 Pin Configuration!"
#endif
// <o> SDMMC1_D2 Pin <0=>PC10
#define RTE_SDMMC1_D2_PORT_ID 0
#if (RTE_SDMMC1_D2_PORT_ID == 0)
#define RTE_SDMMC1_D2_PORT GPIOC
#define RTE_SDMMC1_D2_PIN GPIO_PIN_10
#else
#error "Invalid SDMMC1_D2 Pin Configuration!"
#endif
// <o> SDMMC1_D3 Pin <0=>PC11
#define RTE_SDMMC1_D3_PORT_ID 0
#if (RTE_SDMMC1_D3_PORT_ID == 0)
#define RTE_SDMMC1_D3_PORT GPIOC
#define RTE_SDMMC1_D3_PIN GPIO_PIN_11
#else
#error "Invalid SDMMC1_D3 Pin Configuration!"
#endif
// </e> SDMMC1_D[1 .. 3]
// <e> SDMMC1_D[4 .. 7]
#define RTE_SDMMC1_BUS_WIDTH_8 0
// <o> SDMMC1_D4 Pin <0=>PB8
#define RTE_SDMMC1_D4_PORT_ID 0
#if (RTE_SDMMC1_D4_PORT_ID == 0)
#define RTE_SDMMC1_D4_PORT GPIOB
#define RTE_SDMMC1_D4_PIN GPIO_PIN_8
#else
#error "Invalid SDMMC1_D4 Pin Configuration!"
#endif
// <o> SDMMC1_D5 Pin <0=>PB9
#define RTE_SDMMC1_D5_PORT_ID 0
#if (RTE_SDMMC1_D5_PORT_ID == 0)
#define RTE_SDMMC1_D5_PORT GPIOB
#define RTE_SDMMC1_D5_PIN GPIO_PIN_9
#else
#error "Invalid SDMMC1_D5 Pin Configuration!"
#endif
// <o> SDMMC1_D6 Pin <0=>PC6
#define RTE_SDMMC1_D6_PORT_ID 0
#if (RTE_SDMMC1_D6_PORT_ID == 0)
#define RTE_SDMMC1_D6_PORT GPIOC
#define RTE_SDMMC1_D6_PIN GPIO_PIN_6
#else
#error "Invalid SDMMC1_D6 Pin Configuration!"
#endif
// <o> SDMMC1_D7 Pin <0=>PC7
#define RTE_SDMMC1_D7_PORT_ID 0
#if (RTE_SDMMC1_D7_PORT_ID == 0)
#define RTE_SDMMC1_D7_PORT GPIOC
#define RTE_SDMMC1_D7_PIN GPIO_PIN_7
#else
#error "Invalid SDMMC1_D7 Pin Configuration!"
#endif
// </e> SDMMC1_D[4 .. 7]
// </h> SDMMC Peripheral Bus
// <e> Card Detect Pin
// <i> Configure Pin if exists
// <i> GPIO Pxy (x = A..H, y = 0..15) or (x = I, y = 0..11)
// <o1> Active State <0=>Low <1=>High
// <i> Selects Active State Logical Level
// <o2> Port <0=>GPIOA <1=>GPIOB <2=>GPIOC <3=>GPIOD
// <4=>GPIOE <5=>GPIOF <6=>GPIOG <7=>GPIOH <8=>GPIOI
// <i> Selects Port Name
// <o3> Bit <0-15>
// <i> Selects Port Bit
// <o4> Pull Resistor <0=>Inactive <1=>Pull-up <2=>Pull-down
// <i> Select Pin Pull Resistor function
// </e>
#define RTE_SDMMC1_CD_PIN_EN 0
#define RTE_SDMMC1_CD_ACTIVE 0
#define RTE_SDMMC1_CD_PORT GPIO_PORT(0)
#define RTE_SDMMC1_CD_PIN 0
#define RTE_SDMMC1_CD_PULL 1
// <e> Write Protect Pin
// <i> Configure Pin if exists
// <i> GPIO Pxy (x = A..H, y = 0..15) or (x = I, y = 0..11)
// <o1> Active State <0=>Low <1=>High
// <i> Selects Active State Logical Level
// <o2> Port <0=>GPIOA <1=>GPIOB <2=>GPIOC <3=>GPIOD
// <4=>GPIOE <5=>GPIOF <6=>GPIOG <7=>GPIOH <8=>GPIOI
// <i> Selects Port Name
// <o3> Bit <0-15>
// <i> Selects Port Bit
// <o4> Pull Resistor <0=>Inactive <1=>Pull-up <2=>Pull-down
// <i> Select Pin Pull Resistor function
// </e>
#define RTE_SDMMC1_WP_EN 0
#define RTE_SDMMC1_WP_ACTIVE 0
#define RTE_SDMMC1_WP_PORT GPIO_PORT(0)
#define RTE_SDMMC1_WP_PIN 0
#define RTE_SDMMC1_WP_PULL 1
// <e> DMA Rx
// <o1> Number <2=>2
// <i> Selects DMA Number (only DMA2 can be used)
// <o2> Stream <3=>3 <6=>6
// <i> Selects DMA Stream (only Stream 3 or 6 can be used)
// <o3> Channel <4=>4
// <i> Selects DMA Channel (only Channel 4 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_SDMMC1_RX_DMA 1
#define RTE_SDMMC1_RX_DMA_NUMBER 2
#define RTE_SDMMC1_RX_DMA_STREAM 3
#define RTE_SDMMC1_RX_DMA_CHANNEL 4
#define RTE_SDMMC1_RX_DMA_PRIORITY 0
// <e> DMA Tx
// <o1> Number <2=>2
// <i> Selects DMA Number (only DMA2 can be used)
// <o2> Stream <3=>3 <6=>6
// <i> Selects DMA Stream (only Stream 3 or 6 can be used)
// <o3> Channel <4=>4
// <i> Selects DMA Channel (only Channel 4 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_SDMMC1_TX_DMA 1
#define RTE_SDMMC1_TX_DMA_NUMBER 2
#define RTE_SDMMC1_TX_DMA_STREAM 6
#define RTE_SDMMC1_TX_DMA_CHANNEL 4
#define RTE_SDMMC1_TX_DMA_PRIORITY 0
// </e>
// <e> SDMMC2 (SD/SDIO/MMC card host interface 2) [Driver_MCI1]
// <i> Configuration settings for Driver_MCI1 in component ::CMSIS Driver:MCI
#define RTE_SDMMC2 0
// <h> SDMMC Peripheral Bus
// <o> SDMMC2_CK Pin <0=>PD6
#define RTE_SDMMC2_CK_PORT_ID 0
#if (RTE_SDMMC2_CK_PORT_ID == 0)
#define RTE_SDMMC2_CK_PORT GPIOD
#define RTE_SDMMC2_CK_PIN GPIO_PIN_6
#define RTE_SDMMC2_CK_AF GPIO_AF11_SDMMC2
#else
#error "Invalid SDMMC2_CLK Pin Configuration!"
#endif
// <o> SDMMC2_CMD Pin <0=>PD7
#define RTE_SDMMC2_CMD_PORT_ID 0
#if (RTE_SDMMC2_CMD_PORT_ID == 0)
#define RTE_SDMMC2_CMD_PORT GPIOD
#define RTE_SDMMC2_CMD_PIN GPIO_PIN_7
#define RTE_SDMMC2_CMD_AF GPIO_AF11_SDMMC2
#else
#error "Invalid SDMMC2_CMD Pin Configuration!"
#endif
// <o> SDMMC2_D0 Pin <0=>PB14 <1=>PG9
#define RTE_SDMMC2_D0_PORT_ID 0
#if (RTE_SDMMC2_D0_PORT_ID == 0)
#define RTE_SDMMC2_D0_PORT GPIOB
#define RTE_SDMMC2_D0_PIN GPIO_PIN_14
#define RTE_SDMMC2_D0_AF GPIO_AF10_SDMMC2
#elif (RTE_SDMMC2_D0_PORT_ID == 1)
#define RTE_SDMMC2_D0_PORT GPIOG
#define RTE_SDMMC2_D0_PIN GPIO_PIN_9
#define RTE_SDMMC2_D0_AF GPIO_AF11_SDMMC2
#else
#error "Invalid SDMMC2_D0 Pin Configuration!"
#endif
// <e> SDMMC2_D[1 .. 3]
#define RTE_SDMMC2_BUS_WIDTH_4 1
// <o> SDMMC2_D1 Pin <0=>PB15 <1=>PG10
#define RTE_SDMMC2_D1_PORT_ID 0
#if (RTE_SDMMC2_D1_PORT_ID == 0)
#define RTE_SDMMC2_D1_PORT GPIOB
#define RTE_SDMMC2_D1_PIN GPIO_PIN_15
#define RTE_SDMMC2_D1_AF GPIO_AF10_SDMMC2
#elif (RTE_SDMMC2_D1_PORT_ID == 1)
#define RTE_SDMMC2_D1_PORT GPIOG
#define RTE_SDMMC2_D1_PIN GPIO_PIN_10
#define RTE_SDMMC2_D1_AF GPIO_AF11_SDMMC2
#else
#error "Invalid SDMMC2_D1 Pin Configuration!"
#endif
// <o> SDMMC2_D2 Pin <0=>PB3 <1=>PG11
#define RTE_SDMMC2_D2_PORT_ID 0
#if (RTE_SDMMC2_D2_PORT_ID == 0)
#define RTE_SDMMC2_D2_PORT GPIOB
#define RTE_SDMMC2_D2_PIN GPIO_PIN_3
#define RTE_SDMMC2_D2_AF GPIO_AF10_SDMMC2
#elif (RTE_SDMMC2_D2_PORT_ID == 1)
#define RTE_SDMMC2_D2_PORT GPIOG
#define RTE_SDMMC2_D2_PIN GPIO_PIN_11
#define RTE_SDMMC2_D2_AF GPIO_AF10_SDMMC2
#else
#error "Invalid SDMMC2_D2 Pin Configuration!"
#endif
// <o> SDMMC2_D3 Pin <0=>PB4 <1=>PG12
#define RTE_SDMMC2_D3_PORT_ID 0
#if (RTE_SDMMC2_D3_PORT_ID == 0)
#define RTE_SDMMC2_D3_PORT GPIOB
#define RTE_SDMMC2_D3_PIN GPIO_PIN_4
#define RTE_SDMMC2_D3_AF GPIO_AF10_SDMMC2
#elif (RTE_SDMMC2_D3_PORT_ID == 1)
#define RTE_SDMMC2_D3_PORT GPIOG
#define RTE_SDMMC2_D3_PIN GPIO_PIN_12
#define RTE_SDMMC2_D3_AF GPIO_AF11_SDMMC2
#else
#error "Invalid SDMMC2_D3 Pin Configuration!"
#endif
// </e> SDMMC2_D[1 .. 3]
// <e> SDMMC2_D[4 .. 7]
#define RTE_SDMMC2_BUS_WIDTH_8 0
// <o> SDMMC2_D4 Pin <0=>PB8
#define RTE_SDMMC2_D4_PORT_ID 0
#if (RTE_SDMMC2_D4_PORT_ID == 0)
#define RTE_SDMMC2_D4_PORT GPIOB
#define RTE_SDMMC2_D4_PIN GPIO_PIN_8
#define RTE_SDMMC2_D4_AF GPIO_AF10_SDMMC2
#else
#error "Invalid SDMMC2_D4 Pin Configuration!"
#endif
// <o> SDMMC2_D5 Pin <0=>PB9
#define RTE_SDMMC2_D5_PORT_ID 0
#if (RTE_SDMMC2_D5_PORT_ID == 0)
#define RTE_SDMMC2_D5_PORT GPIOB
#define RTE_SDMMC2_D5_PIN GPIO_PIN_9
#define RTE_SDMMC2_D5_AF GPIO_AF10_SDMMC2
#else
#error "Invalid SDMMC2_D5 Pin Configuration!"
#endif
// <o> SDMMC2_D6 Pin <0=>PC6
#define RTE_SDMMC2_D6_PORT_ID 0
#if (RTE_SDMMC2_D6_PORT_ID == 0)
#define RTE_SDMMC2_D6_PORT GPIOC
#define RTE_SDMMC2_D6_PIN GPIO_PIN_6
#define RTE_SDMMC2_D6_AF GPIO_AF10_SDMMC2
#else
#error "Invalid SDMMC2_D6 Pin Configuration!"
#endif
// <o> SDMMC2_D7 Pin <0=>PC7
#define RTE_SDMMC2_D7_PORT_ID 0
#if (RTE_SDMMC2_D7_PORT_ID == 0)
#define RTE_SDMMC2_D7_PORT GPIOC
#define RTE_SDMMC2_D7_PIN GPIO_PIN_7
#define RTE_SDMMC2_D7_AF GPIO_AF10_SDMMC2
#else
#error "Invalid SDMMC2_D7 Pin Configuration!"
#endif
// </e> SDMMC2_D[4 .. 7]
// </h> SDMMC Peripheral Bus
// <e> Card Detect Pin
// <i> Configure Pin if exists
// <i> GPIO Pxy (x = A..H, y = 0..15) or (x = I, y = 0..11)
// <o1> Active State <0=>Low <1=>High
// <i> Selects Active State Logical Level
// <o2> Port <0=>GPIOA <1=>GPIOB <2=>GPIOC <3=>GPIOD
// <4=>GPIOE <5=>GPIOF <6=>GPIOG <7=>GPIOH <8=>GPIOI
// <i> Selects Port Name
// <o3> Bit <0-15>
// <i> Selects Port Bit
// <o4> Pull Resistor <0=>Inactive <1=>Pull-up <2=>Pull-down
// <i> Select Pin Pull Resistor function
// </e>
#define RTE_SDMMC2_CD_PIN_EN 1
#define RTE_SDMMC2_CD_ACTIVE 0
#define RTE_SDMMC2_CD_PORT GPIO_PORT(2)
#define RTE_SDMMC2_CD_PIN 12
#define RTE_SDMMC2_CD_PULL 1
// <e> Write Protect Pin
// <i> Configure Pin if exists
// <i> GPIO Pxy (x = A..H, y = 0..15) or (x = I, y = 0..11)
// <o1> Active State <0=>Low <1=>High
// <i> Selects Active State Logical Level
// <o2> Port <0=>GPIOA <1=>GPIOB <2=>GPIOC <3=>GPIOD
// <4=>GPIOE <5=>GPIOF <6=>GPIOG <7=>GPIOH <8=>GPIOI
// <i> Selects Port Name
// <o3> Bit <0-15>
// <i> Selects Port Bit
// <o4> Pull Resistor <0=>Inactive <1=>Pull-up <2=>Pull-down
// <i> Select Pin Pull Resistor function
// </e>
#define RTE_SDMMC2_WP_EN 0
#define RTE_SDMMC2_WP_ACTIVE 0
#define RTE_SDMMC2_WP_PORT GPIO_PORT(0)
#define RTE_SDMMC2_WP_PIN 0
#define RTE_SDMMC2_WP_PULL 1
// <e> DMA Rx
// <o1> Number <2=>2
// <i> Selects DMA Number (only DMA2 can be used)
// <o2> Stream <0=>0 <5=>5
// <i> Selects DMA Stream (only Stream 0 or 5 can be used)
// <o3> Channel <11=>11
// <i> Selects DMA Channel (only Channel 11 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_SDMMC2_RX_DMA 1
#define RTE_SDMMC2_RX_DMA_NUMBER 2
#define RTE_SDMMC2_RX_DMA_STREAM 0
#define RTE_SDMMC2_RX_DMA_CHANNEL 11
#define RTE_SDMMC2_RX_DMA_PRIORITY 0
// <e> DMA Tx
// <o1> Number <2=>2
// <i> Selects DMA Number (only DMA2 can be used)
// <o2> Stream <0=>0 <5=>5
// <i> Selects DMA Stream (only Stream 0 or 5 can be used)
// <o3> Channel <11=>11
// <i> Selects DMA Channel (only Channel 11 can be used)
// <o4> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
// <i> Selects DMA Priority
// </e>
#define RTE_SDMMC2_TX_DMA 1
#define RTE_SDMMC2_TX_DMA_NUMBER 2
#define RTE_SDMMC2_TX_DMA_STREAM 5
#define RTE_SDMMC2_TX_DMA_CHANNEL 11
#define RTE_SDMMC2_TX_DMA_PRIORITY 0
// </e>
// <e> CAN1 (Controller Area Network 1) [Driver_CAN1]
// <i> Configuration settings for Driver_CAN1 in component ::CMSIS Driver:CAN
#define RTE_CAN1 0
// <o> CAN1_RX Pin <0=>PA11 <1=>PB8 <2=>PD0 <3=>PI9 <4=>PH14
#define RTE_CAN1_RX_PORT_ID 0
#if (RTE_CAN1_RX_PORT_ID == 0)
#define RTE_CAN1_RX_PORT GPIOA
#define RTE_CAN1_RX_BIT GPIO_PIN_11
#elif (RTE_CAN1_RX_PORT_ID == 1)
#define RTE_CAN1_RX_PORT GPIOB
#define RTE_CAN1_RX_BIT GPIO_PIN_8
#elif (RTE_CAN1_RX_PORT_ID == 2)
#define RTE_CAN1_RX_PORT GPIOD
#define RTE_CAN1_RX_BIT GPIO_PIN_0
#elif (RTE_CAN1_RX_PORT_ID == 3)
#define RTE_CAN1_RX_PORT GPIOI
#define RTE_CAN1_RX_BIT GPIO_PIN_9
#elif (RTE_CAN1_RX_PORT_ID == 4)
#define RTE_CAN1_RX_PORT GPIOH
#define RTE_CAN1_RX_BIT GPIO_PIN_14
#else
#error "Invalid CAN1_RX Pin Configuration!"
#endif
// <o> CAN1_TX Pin <0=>PA12 <1=>PB9 <2=>PD1 <3=>PH13
#define RTE_CAN1_TX_PORT_ID 0
#if (RTE_CAN1_TX_PORT_ID == 0)
#define RTE_CAN1_TX_PORT GPIOA
#define RTE_CAN1_TX_BIT GPIO_PIN_12
#elif (RTE_CAN1_TX_PORT_ID == 1)
#define RTE_CAN1_TX_PORT GPIOB
#define RTE_CAN1_TX_BIT GPIO_PIN_9
#elif (RTE_CAN1_TX_PORT_ID == 2)
#define RTE_CAN1_TX_PORT GPIOD
#define RTE_CAN1_TX_BIT GPIO_PIN_1
#elif (RTE_CAN1_TX_PORT_ID == 3)
#define RTE_CAN1_TX_PORT GPIOH
#define RTE_CAN1_TX_BIT GPIO_PIN_13
#else
#error "Invalid CAN1_TX Pin Configuration!"
#endif
// </e>
// <e> CAN2 (Controller Area Network 2) [Driver_CAN2]
// <i> Configuration settings for Driver_CAN2 in component ::CMSIS Driver:CAN
#define RTE_CAN2 0
// <o> CAN2_RX Pin <0=>PB5 <1=>PB12
#define RTE_CAN2_RX_PORT_ID 0
#if (RTE_CAN2_RX_PORT_ID == 0)
#define RTE_CAN2_RX_PORT GPIOB
#define RTE_CAN2_RX_BIT GPIO_PIN_5
#elif (RTE_CAN2_RX_PORT_ID == 1)
#define RTE_CAN2_RX_PORT GPIOB
#define RTE_CAN2_RX_BIT GPIO_PIN_12
#else
#error "Invalid CAN2_RX Pin Configuration!"
#endif
// <o> CAN2_TX Pin <0=>PB6 <1=>PB13
#define RTE_CAN2_TX_PORT_ID 0
#if (RTE_CAN2_TX_PORT_ID == 0)
#define RTE_CAN2_TX_PORT GPIOB
#define RTE_CAN2_TX_BIT GPIO_PIN_6
#elif (RTE_CAN2_TX_PORT_ID == 1)
#define RTE_CAN2_TX_PORT GPIOB
#define RTE_CAN2_TX_BIT GPIO_PIN_13
#else
#error "Invalid CAN2_TX Pin Configuration!"
#endif
// </e>
// <e> CAN3 (Controller Area Network 3) [Driver_CAN3]
// <i> Configuration settings for Driver_CAN3 in component ::CMSIS Driver:CAN
// <i> Available only on STM32F76x and STM32F77x device series
#define RTE_CAN3 0
// <o> CAN3_RX Pin <0=>PA8 <1=>PB3
#define RTE_CAN3_RX_PORT_ID 0
#if (RTE_CAN3_RX_PORT_ID == 0)
#define RTE_CAN3_RX_PORT GPIOA
#define RTE_CAN3_RX_BIT GPIO_PIN_8
#elif (RTE_CAN3_RX_PORT_ID == 1)
#define RTE_CAN3_RX_PORT GPIOB
#define RTE_CAN3_RX_BIT GPIO_PIN_3
#else
#error "Invalid CAN3_RX Pin Configuration!"
#endif
// <o> CAN3_TX Pin <0=>PA15 <1=>PB4
#define RTE_CAN3_TX_PORT_ID 0
#if (RTE_CAN3_TX_PORT_ID == 0)
#define RTE_CAN3_TX_PORT GPIOA
#define RTE_CAN3_TX_BIT GPIO_PIN_15
#elif (RTE_CAN3_TX_PORT_ID == 1)
#define RTE_CAN3_TX_PORT GPIOB
#define RTE_CAN3_TX_BIT GPIO_PIN_4
#else
#error "Invalid CAN3_TX Pin Configuration!"
#endif
// </e>
// <e> ETH (Ethernet Interface) [Driver_ETH_MAC0]
// <i> Configuration settings for Driver_ETH_MAC0 in component ::CMSIS Driver:Ethernet MAC
#define RTE_ETH 0
// <e> MII (Media Independent Interface)
#define RTE_ETH_MII 1
// <o> ETH_MII_TX_CLK Pin <0=>PC3
#define RTE_ETH_MII_TX_CLK_PORT_ID 0
#if (RTE_ETH_MII_TX_CLK_PORT_ID == 0)
#define RTE_ETH_MII_TX_CLK_PORT GPIOC
#define RTE_ETH_MII_TX_CLK_PIN 3
#else
#error "Invalid ETH_MII_TX_CLK Pin Configuration!"
#endif
// <o> ETH_MII_TXD0 Pin <0=>PB12 <1=>PG13
#define RTE_ETH_MII_TXD0_PORT_ID 0
#if (RTE_ETH_MII_TXD0_PORT_ID == 0)
#define RTE_ETH_MII_TXD0_PORT GPIOB
#define RTE_ETH_MII_TXD0_PIN 12
#elif (RTE_ETH_MII_TXD0_PORT_ID == 1)
#define RTE_ETH_MII_TXD0_PORT GPIOG
#define RTE_ETH_MII_TXD0_PIN 13
#else
#error "Invalid ETH_MII_TXD0 Pin Configuration!"
#endif
// <o> ETH_MII_TXD1 Pin <0=>PB13 <1=>PG14
#define RTE_ETH_MII_TXD1_PORT_ID 0
#if (RTE_ETH_MII_TXD1_PORT_ID == 0)
#define RTE_ETH_MII_TXD1_PORT GPIOB
#define RTE_ETH_MII_TXD1_PIN 13
#elif (RTE_ETH_MII_TXD1_PORT_ID == 1)
#define RTE_ETH_MII_TXD1_PORT GPIOG
#define RTE_ETH_MII_TXD1_PIN 14
#else
#error "Invalid ETH_MII_TXD1 Pin Configuration!"
#endif
// <o> ETH_MII_TXD2 Pin <0=>PC2
#define RTE_ETH_MII_TXD2_PORT_ID 0
#if (RTE_ETH_MII_TXD2_PORT_ID == 0)
#define RTE_ETH_MII_TXD2_PORT GPIOC
#define RTE_ETH_MII_TXD2_PIN 2
#else
#error "Invalid ETH_MII_TXD2 Pin Configuration!"
#endif
// <o> ETH_MII_TXD3 Pin <0=>PB8 <1=>PE2
#define RTE_ETH_MII_TXD3_PORT_ID 0
#if (RTE_ETH_MII_TXD3_PORT_ID == 0)
#define RTE_ETH_MII_TXD3_PORT GPIOB
#define RTE_ETH_MII_TXD3_PIN 8
#elif (RTE_ETH_MII_TXD3_PORT_ID == 1)
#define RTE_ETH_MII_TXD3_PORT GPIOE
#define RTE_ETH_MII_TXD3_PIN 2
#else
#error "Invalid ETH_MII_TXD3 Pin Configuration!"
#endif
// <o> ETH_MII_TX_EN Pin <0=>PB11 <1=>PG11
#define RTE_ETH_MII_TX_EN_PORT_ID 0
#if (RTE_ETH_MII_TX_EN_PORT_ID == 0)
#define RTE_ETH_MII_TX_EN_PORT GPIOB
#define RTE_ETH_MII_TX_EN_PIN 11
#elif (RTE_ETH_MII_TX_EN_PORT_ID == 1)
#define RTE_ETH_MII_TX_EN_PORT GPIOG
#define RTE_ETH_MII_TX_EN_PIN 11
#else
#error "Invalid ETH_MII_TX_EN Pin Configuration!"
#endif
// <o> ETH_MII_RX_CLK Pin <0=>PA1
#define RTE_ETH_MII_RX_CLK_PORT_ID 0
#if (RTE_ETH_MII_RX_CLK_PORT_ID == 0)
#define RTE_ETH_MII_RX_CLK_PORT GPIOA
#define RTE_ETH_MII_RX_CLK_PIN 1
#else
#error "Invalid ETH_MII_RX_CLK Pin Configuration!"
#endif
// <o> ETH_MII_RXD0 Pin <0=>PC4
#define RTE_ETH_MII_RXD0_PORT_ID 0
#if (RTE_ETH_MII_RXD0_PORT_ID == 0)
#define RTE_ETH_MII_RXD0_PORT GPIOC
#define RTE_ETH_MII_RXD0_PIN 4
#else
#error "Invalid ETH_MII_RXD0 Pin Configuration!"
#endif
// <o> ETH_MII_RXD1 Pin <0=>PC5
#define RTE_ETH_MII_RXD1_PORT_ID 0
#if (RTE_ETH_MII_RXD1_PORT_ID == 0)
#define RTE_ETH_MII_RXD1_PORT GPIOC
#define RTE_ETH_MII_RXD1_PIN 5
#else
#error "Invalid ETH_MII_RXD1 Pin Configuration!"
#endif
// <o> ETH_MII_RXD2 Pin <0=>PB0 <1=>PH6
#define RTE_ETH_MII_RXD2_PORT_ID 0
#if (RTE_ETH_MII_RXD2_PORT_ID == 0)
#define RTE_ETH_MII_RXD2_PORT GPIOB
#define RTE_ETH_MII_RXD2_PIN 0
#elif (RTE_ETH_MII_RXD2_PORT_ID == 1)
#define RTE_ETH_MII_RXD2_PORT GPIOH
#define RTE_ETH_MII_RXD2_PIN 6
#else
#error "Invalid ETH_MII_RXD2 Pin Configuration!"
#endif
// <o> ETH_MII_RXD3 Pin <0=>PB1 <1=>PH7
#define RTE_ETH_MII_RXD3_PORT_ID 0
#if (RTE_ETH_MII_RXD3_PORT_ID == 0)
#define RTE_ETH_MII_RXD3_PORT GPIOB
#define RTE_ETH_MII_RXD3_PIN 1
#elif (RTE_ETH_MII_RXD3_PORT_ID == 1)
#define RTE_ETH_MII_RXD3_PORT GPIOH
#define RTE_ETH_MII_RXD3_PIN 7
#else
#error "Invalid ETH_MII_RXD3 Pin Configuration!"
#endif
// <o> ETH_MII_RX_DV Pin <0=>PA7
#define RTE_ETH_MII_RX_DV_PORT_ID 0
#if (RTE_ETH_MII_RX_DV_PORT_ID == 0)
#define RTE_ETH_MII_RX_DV_PORT GPIOA
#define RTE_ETH_MII_RX_DV_PIN 7
#else
#error "Invalid ETH_MII_RX_DV Pin Configuration!"
#endif
// <o> ETH_MII_RX_ER Pin <0=>Not Used <1=>PB10 <2=>PI10
#define RTE_ETH_MII_RX_ER_PORT_ID 0
#if (RTE_ETH_MII_RX_ER_PORT_ID == 0)
#define RTE_ETH_MII_RX_ER_PORT NULL
#elif (RTE_ETH_MII_RX_ER_PORT_ID == 1)
#define RTE_ETH_MII_RX_ER_PORT GPIOB
#define RTE_ETH_MII_RX_ER_PIN 10
#elif (RTE_ETH_MII_RX_ER_PORT_ID == 2)
#define RTE_ETH_MII_RX_ER_PORT GPIOI
#define RTE_ETH_MII_RX_ER_PIN 10
#else
#error "Invalid ETH_MII_RX_ER Pin Configuration!"
#endif
// <o> ETH_MII_CRS Pin <0=>Not Used <1=>PA0 <2=>PH2
#define RTE_ETH_MII_CRS_PORT_ID 0
#if (RTE_ETH_MII_CRS_PORT_ID == 0)
#define RTE_ETH_MII_CRS_PORT NULL
#elif (RTE_ETH_MII_CRS_PORT_ID == 1)
#define RTE_ETH_MII_CRS_PORT GPIOA
#define RTE_ETH_MII_CRS_PIN 0
#elif (RTE_ETH_MII_CRS_PORT_ID == 2)
#define RTE_ETH_MII_CRS_PORT GPIOH
#define RTE_ETH_MII_CRS_PIN 2
#else
#error "Invalid ETH_MII_CRS Pin Configuration!"
#endif
// <o> ETH_MII_COL Pin <0=>Not Used <1=>PA3 <2=>PH3
#define RTE_ETH_MII_COL_PORT_ID 0
#if (RTE_ETH_MII_COL_PORT_ID == 0)
#define RTE_ETH_MII_COL_PORT NULL
#elif (RTE_ETH_MII_COL_PORT_ID == 1)
#define RTE_ETH_MII_COL_PORT GPIOA
#define RTE_ETH_MII_COL_PIN 3
#elif (RTE_ETH_MII_COL_PORT_ID == 2)
#define RTE_ETH_MII_COL_PORT GPIOH
#define RTE_ETH_MII_COL_PIN 3
#else
#error "Invalid ETH_MII_COL Pin Configuration!"
#endif
// </e>
// <e> RMII (Reduced Media Independent Interface)
#define RTE_ETH_RMII 0
// <o> ETH_RMII_TXD0 Pin <0=>PB12 <1=>PG13
#define RTE_ETH_RMII_TXD0_PORT_ID 0
#if (RTE_ETH_RMII_TXD0_PORT_ID == 0)
#define RTE_ETH_RMII_TXD0_PORT GPIOB
#define RTE_ETH_RMII_TXD0_PIN 12
#elif (RTE_ETH_RMII_TXD0_PORT_ID == 1)
#define RTE_ETH_RMII_TXD0_PORT GPIOG
#define RTE_ETH_RMII_TXD0_PIN 13
#else
#error "Invalid ETH_RMII_TXD0 Pin Configuration!"
#endif
// <o> ETH_RMII_TXD1 Pin <0=>PB13 <1=>PG14
#define RTE_ETH_RMII_TXD1_PORT_ID 0
#if (RTE_ETH_RMII_TXD1_PORT_ID == 0)
#define RTE_ETH_RMII_TXD1_PORT GPIOB
#define RTE_ETH_RMII_TXD1_PIN 13
#elif (RTE_ETH_RMII_TXD1_PORT_ID == 1)
#define RTE_ETH_RMII_TXD1_PORT GPIOG
#define RTE_ETH_RMII_TXD1_PIN 14
#else
#error "Invalid ETH_RMII_TXD1 Pin Configuration!"
#endif
// <o> ETH_RMII_TX_EN Pin <0=>PB11 <1=>PG11
#define RTE_ETH_RMII_TX_EN_PORT_ID 0
#if (RTE_ETH_RMII_TX_EN_PORT_ID == 0)
#define RTE_ETH_RMII_TX_EN_PORT GPIOB
#define RTE_ETH_RMII_TX_EN_PIN 11
#elif (RTE_ETH_RMII_TX_EN_PORT_ID == 1)
#define RTE_ETH_RMII_TX_EN_PORT GPIOG
#define RTE_ETH_RMII_TX_EN_PIN 11
#else
#error "Invalid ETH_RMII_TX_EN Pin Configuration!"
#endif
// <o> ETH_RMII_RXD0 Pin <0=>PC4
#define RTE_ETH_RMII_RXD0_PORT_ID 0
#if (RTE_ETH_RMII_RXD0_PORT_ID == 0)
#define RTE_ETH_RMII_RXD0_PORT GPIOC
#define RTE_ETH_RMII_RXD0_PIN 4
#else
#error "Invalid ETH_RMII_RXD0 Pin Configuration!"
#endif
// <o> ETH_RMII_RXD1 Pin <0=>PC5
#define RTE_ETH_RMII_RXD1_PORT_ID 0
#if (RTE_ETH_RMII_RXD1_PORT_ID == 0)
#define RTE_ETH_RMII_RXD1_PORT GPIOC
#define RTE_ETH_RMII_RXD1_PIN 5
#else
#error "Invalid ETH_RMII_RXD1 Pin Configuration!"
#endif
// <o> ETH_RMII_REF_CLK Pin <0=>PA1
#define RTE_ETH_RMII_REF_CLK_PORT_ID 0
#if (RTE_ETH_RMII_REF_CLK_PORT_ID == 0)
#define RTE_ETH_RMII_REF_CLK_PORT GPIOA
#define RTE_ETH_RMII_REF_CLK_PIN 1
#else
#error "Invalid ETH_RMII_REF_CLK Pin Configuration!"
#endif
// <o> ETH_RMII_CRS_DV Pin <0=>PA7
#define RTE_ETH_RMII_CRS_DV_PORT_ID 0
#if (RTE_ETH_RMII_CRS_DV_PORT_ID == 0)
#define RTE_ETH_RMII_CRS_DV_PORT GPIOA
#define RTE_ETH_RMII_CRS_DV_PIN 7
#else
#error "Invalid ETH_RMII_CRS_DV Pin Configuration!"
#endif
// </e>
// <h> SMI (Station Management Interface)
// <e> Hardware controlled
// <i> Enable peripheral controlled SMI on dedicated pins
#define RTE_ETH_SMI_HW 1
// <o> ETH_MDC Pin <0=>PC1
#define RTE_ETH_SMI_MDC_PORT_ID 0
#if (RTE_ETH_SMI_MDC_PORT_ID == 0)
#define RTE_ETH_SMI_MDC_PORT GPIOC
#define RTE_ETH_SMI_MDC_PIN 1
#else
#error "Invalid ETH_MDC Pin Configuration!"
#endif
// <o> ETH_MDIO Pin <0=>PA2
#define RTE_ETH_SMI_MDIO_PORT_ID 0
#if (RTE_ETH_SMI_MDIO_PORT_ID == 0)
#define RTE_ETH_SMI_MDIO_PORT GPIOA
#define RTE_ETH_SMI_MDIO_PIN 2
#else
#error "Invalid ETH_MDIO Pin Configuration!"
#endif
// </e>
// <e> Software controlled
// <i> Enable software controlled SMI on arbitrary GPIO pins
#define RTE_ETH_SMI_SW 0
// <h> ETH_MDC Pin
// <i> Configure arbitrary GPIO as MDC Pin
// <i> GPIO Pxy (x = A..H, y = 0..15) or (x = I, y = 0..11)
// <o0> Port <0=>GPIOA <1=>GPIOB <2=>GPIOC <3=>GPIOD
// <4=>GPIOE <5=>GPIOF <6=>GPIOG <7=>GPIOH <8=>GPIOI
// <i> Selects Port Name
// <o1> Bit <0-15>
// <i> Selects Port Bit
#define RTE_ETH_SMI_SW_MDC_PORT GPIO_PORT(6)
#define RTE_ETH_SMI_SW_MDC_PIN 7
// </h>
// <h> ETH_MDIO Pin
// <i> Configure arbitrary GPIO as MDIO Pin
// <i> GPIO Pxy (x = A..H, y = 0..15) or (x = I, y = 0..11)
// <o0> Port <0=>GPIOA <1=>GPIOB <2=>GPIOC <3=>GPIOD
// <4=>GPIOE <5=>GPIOF <6=>GPIOG <7=>GPIOH <8=>GPIOI
// <i> Selects Port Name
// <o1> Bit <0-15>
// <i> Selects Port Bit
#define RTE_ETH_SMI_SW_MDIO_PORT GPIO_PORT(6)
#define RTE_ETH_SMI_SW_MDIO_PIN 6
// </h>
// </e>
// </h>
// <o> DMA Descriptor/Buffer Memory Address <0x20000000-0xE0000000>
// <i> Configure location of the Ethernet DMA Descriptor and Buffer memory
#define RTE_ETH_DMA_MEM_ADDR 0x2000C000
// </e>
// <e> USB OTG Full-speed
#define RTE_USB_OTG_FS 0
// <e> Device [Driver_USBD0]
// <i> Configuration settings for Driver_USBD0 in component ::CMSIS Driver:USB Device
#define RTE_USB_OTG_FS_DEVICE 1
// <o0.0> VBUS Sensing Pin
// <i> Enable or disable VBUS sensing
#define RTE_OTG_FS_VBUS_SENSING_PIN 1
// </e>
// <e> Host [Driver_USBH0]
// <i> Configuration settings for Driver_USBH0 in component ::CMSIS Driver:USB Host
#define RTE_USB_OTG_FS_HOST 0
// <e> VBUS Power On/Off Pin
// <i> Configure Pin for driving VBUS
// <i> GPIO Pxy (x = A..J, y = 0..15) or (x = K, y = 0..7)
// <o1> Active State <0=>Low <1=>High
// <i> Selects Active State Logical Level
// <o2> Port <0=>GPIOA <1=>GPIOB <2=>GPIOC <3=>GPIOD
// <4=>GPIOE <5=>GPIOF <6=>GPIOG <7=>GPIOH
// <8=>GPIOI <8=>GPIOJ <9=>GPIOK
// <i> Selects Port Name
// <o3> Bit <0-15>
// <i> Selects Port Bit
// </e>
#define RTE_OTG_FS_VBUS_PIN 1
#define RTE_OTG_FS_VBUS_ACTIVE 0
#define RTE_OTG_FS_VBUS_PORT GPIO_PORT(7)
#define RTE_OTG_FS_VBUS_BIT 5
// <e> Overcurrent Detection Pin
// <i> Configure Pin for overcurrent detection
// <i> GPIO Pxy (x = A..J, y = 0..15) or (x = K, y = 0..7)
// <o1> Active State <0=>Low <1=>High
// <i> Selects Active State Logical Level
// <o2> Port <0=>GPIOA <1=>GPIOB <2=>GPIOC <3=>GPIOD
// <4=>GPIOE <5=>GPIOF <6=>GPIOG <7=>GPIOH
// <8=>GPIOI <8=>GPIOJ <9=>GPIOK
// <i> Selects Port Name
// <o3> Bit <0-15>
// <i> Selects Port Bit
// </e>
#define RTE_OTG_FS_OC_PIN 1
#define RTE_OTG_FS_OC_ACTIVE 0
#define RTE_OTG_FS_OC_PORT GPIO_PORT(5)
#define RTE_OTG_FS_OC_BIT 11
// </e>
// </e>
// <e> USB OTG High-speed
#define RTE_USB_OTG_HS 0
// <h> PHY (Physical Layer)
// <o> PHY Interface
// <0=>On-chip full-speed PHY
// <1=>External ULPI high-speed PHY
#define RTE_USB_OTG_HS_PHY 1
// <h> External ULPI Pins (UTMI+ Low Pin Interface)
// <o> OTG_HS_ULPI_CK Pin <0=>PA5
#define RTE_USB_OTG_HS_ULPI_CK_PORT_ID 0
#if (RTE_USB_OTG_HS_ULPI_CK_PORT_ID == 0)
#define RTE_USB_OTG_HS_ULPI_CK_PORT GPIOA
#define RTE_USB_OTG_HS_ULPI_CK_PIN 5
#else
#error "Invalid OTG_HS_ULPI_CK Pin Configuration!"
#endif
// <o> OTG_HS_ULPI_DIR Pin <0=>PI11 <1=>PC2
#define RTE_USB_OTG_HS_ULPI_DIR_PORT_ID 0
#if (RTE_USB_OTG_HS_ULPI_DIR_PORT_ID == 0)
#define RTE_USB_OTG_HS_ULPI_DIR_PORT GPIOI
#define RTE_USB_OTG_HS_ULPI_DIR_PIN 11
#elif (RTE_USB_OTG_HS_ULPI_DIR_PORT_ID == 1)
#define RTE_USB_OTG_HS_ULPI_DIR_PORT GPIOC
#define RTE_USB_OTG_HS_ULPI_DIR_PIN 2
#else
#error "Invalid OTG_HS_ULPI_DIR Pin Configuration!"
#endif
// <o> OTG_HS_ULPI_STP Pin <0=>PC0
#define RTE_USB_OTG_HS_ULPI_STP_PORT_ID 0
#if (RTE_USB_OTG_HS_ULPI_STP_PORT_ID == 0)
#define RTE_USB_OTG_HS_ULPI_STP_PORT GPIOC
#define RTE_USB_OTG_HS_ULPI_STP_PIN 0
#else
#error "Invalid OTG_HS_ULPI_STP Pin Configuration!"
#endif
// <o> OTG_HS_ULPI_NXT Pin <0=>PC3 <1=>PH4
#define RTE_USB_OTG_HS_ULPI_NXT_PORT_ID 1
#if (RTE_USB_OTG_HS_ULPI_NXT_PORT_ID == 0)
#define RTE_USB_OTG_HS_ULPI_NXT_PORT GPIOC
#define RTE_USB_OTG_HS_ULPI_NXT_PIN 3
#elif (RTE_USB_OTG_HS_ULPI_NXT_PORT_ID == 1)
#define RTE_USB_OTG_HS_ULPI_NXT_PORT GPIOH
#define RTE_USB_OTG_HS_ULPI_NXT_PIN 4
#else
#error "Invalid OTG_HS_ULPI_NXT Pin Configuration!"
#endif
// <o> OTG_HS_ULPI_D0 Pin <0=>PA3
#define RTE_USB_OTG_HS_ULPI_D0_PORT_ID 0
#if (RTE_USB_OTG_HS_ULPI_D0_PORT_ID == 0)
#define RTE_USB_OTG_HS_ULPI_D0_PORT GPIOA
#define RTE_USB_OTG_HS_ULPI_D0_PIN 3
#else
#error "Invalid OTG_HS_ULPI_D0 Pin Configuration!"
#endif
// <o> OTG_HS_ULPI_D1 Pin <0=>PB0
#define RTE_USB_OTG_HS_ULPI_D1_PORT_ID 0
#if (RTE_USB_OTG_HS_ULPI_D1_PORT_ID == 0)
#define RTE_USB_OTG_HS_ULPI_D1_PORT GPIOB
#define RTE_USB_OTG_HS_ULPI_D1_PIN 0
#else
#error "Invalid OTG_HS_ULPI_D1 Pin Configuration!"
#endif
// <o> OTG_HS_ULPI_D2 Pin <0=>PB1
#define RTE_USB_OTG_HS_ULPI_D2_PORT_ID 0
#if (RTE_USB_OTG_HS_ULPI_D2_PORT_ID == 0)
#define RTE_USB_OTG_HS_ULPI_D2_PORT GPIOB
#define RTE_USB_OTG_HS_ULPI_D2_PIN 1
#else
#error "Invalid OTG_HS_ULPI_D2 Pin Configuration!"
#endif
// <o> OTG_HS_ULPI_D3 Pin <0=>PB10
#define RTE_USB_OTG_HS_ULPI_D3_PORT_ID 0
#if (RTE_USB_OTG_HS_ULPI_D3_PORT_ID == 0)
#define RTE_USB_OTG_HS_ULPI_D3_PORT GPIOB
#define RTE_USB_OTG_HS_ULPI_D3_PIN 10
#else
#error "Invalid OTG_HS_ULPI_D3 Pin Configuration!"
#endif
// <o> OTG_HS_ULPI_D4 Pin <0=>PB11
#define RTE_USB_OTG_HS_ULPI_D4_PORT_ID 0
#if (RTE_USB_OTG_HS_ULPI_D4_PORT_ID == 0)
#define RTE_USB_OTG_HS_ULPI_D4_PORT GPIOB
#define RTE_USB_OTG_HS_ULPI_D4_PIN 11
#else
#error "Invalid OTG_HS_ULPI_D4 Pin Configuration!"
#endif
// <o> OTG_HS_ULPI_D5 Pin <0=>PB12
#define RTE_USB_OTG_HS_ULPI_D5_PORT_ID 0
#if (RTE_USB_OTG_HS_ULPI_D5_PORT_ID == 0)
#define RTE_USB_OTG_HS_ULPI_D5_PORT GPIOB
#define RTE_USB_OTG_HS_ULPI_D5_PIN 12
#else
#error "Invalid OTG_HS_ULPI_D5 Pin Configuration!"
#endif
// <o> OTG_HS_ULPI_D6 Pin <0=>PB13
#define RTE_USB_OTG_HS_ULPI_D6_PORT_ID 0
#if (RTE_USB_OTG_HS_ULPI_D6_PORT_ID == 0)
#define RTE_USB_OTG_HS_ULPI_D6_PORT GPIOB
#define RTE_USB_OTG_HS_ULPI_D6_PIN 13
#else
#error "Invalid OTG_HS_ULPI_D6 Pin Configuration!"
#endif
// <o> OTG_HS_ULPI_D7 Pin <0=>PB5
#define RTE_USB_OTG_HS_ULPI_D7_PORT_ID 0
#if (RTE_USB_OTG_HS_ULPI_D7_PORT_ID == 0)
#define RTE_USB_OTG_HS_ULPI_D7_PORT GPIOB
#define RTE_USB_OTG_HS_ULPI_D7_PIN 5
#else
#error "Invalid OTG_HS_ULPI_D7 Pin Configuration!"
#endif
// </h>
// </h>
// <e> Device [Driver_USBD1]
// <i> Configuration settings for Driver_USBD1 in component ::CMSIS Driver:USB Device
#define RTE_USB_OTG_HS_DEVICE 0
// <o0.0> VBUS Sensing Pin
// <i> Enable or disable VBUS sensing
// <i> Relevant only if PHY Interface On-chip full-speed PHY is selected
#define RTE_OTG_HS_VBUS_SENSING_PIN 0
// </e>
// <e> Host [Driver_USBH1]
// <i> Configuration settings for Driver_USBH1 in component ::CMSIS Driver:USB Host
#define RTE_USB_OTG_HS_HOST 0
// <e> VBUS Power On/Off Pin
// <i> Configure Pin for driving VBUS
// <i> GPIO Pxy (x = A..J, y = 0..15) or (x = K, y = 0..7)
// <o1> Active State <0=>Low <1=>High
// <i> Selects Active State Logical Level
// <o2> Port <0=>GPIOA <1=>GPIOB <2=>GPIOC <3=>GPIOD
// <4=>GPIOE <5=>GPIOF <6=>GPIOG <7=>GPIOH
// <8=>GPIOI <8=>GPIOJ <9=>GPIOK
// <i> Selects Port Name
// <o3> Bit <0-15>
// <i> Selects Port Bit
// </e>
#define RTE_OTG_HS_VBUS_PIN 1
#define RTE_OTG_HS_VBUS_ACTIVE 0
#define RTE_OTG_HS_VBUS_PORT GPIO_PORT(2)
#define RTE_OTG_HS_VBUS_BIT 2
// <e> Overcurrent Detection Pin
// <i> Configure Pin for overcurrent detection
// <i> GPIO Pxy (x = A..J, y = 0..15) or (x = K, y = 0..7)
// <o1> Active State <0=>Low <1=>High
// <i> Selects Active State Logical Level
// <o2> Port <0=>GPIOA <1=>GPIOB <2=>GPIOC <3=>GPIOD
// <4=>GPIOE <5=>GPIOF <6=>GPIOG <7=>GPIOH
// <8=>GPIOI <8=>GPIOJ <9=>GPIOK
// <i> Selects Port Name
// <o3> Bit <0-15>
// <i> Selects Port Bit
// </e>
#define RTE_OTG_HS_OC_PIN 1
#define RTE_OTG_HS_OC_ACTIVE 0
#define RTE_OTG_HS_OC_PORT GPIO_PORT(5)
#define RTE_OTG_HS_OC_BIT 12
// </e>
// <o.0> DMA
// <i> Use dedicated DMA for transfers
// <i> If DMA is used all USB transfer data buffers have to be 4-byte aligned.
#define RTE_OTG_HS_DMA 0
// </e>
#endif /* __RTE_DEVICE_H */
Copy Permalink