doc: renamed project

pico-sensor/McuLib/FatFS/McuFatFS_CardPins_config.h

@@ -0,0 +1,102 @@
+/*
+ * Copyright (c) 2021, Erich Styger
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef MCUFATFS_CARDPINS_CONFIG_H_
+#define MCUFATFS_CARDPINS_CONFIG_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "McuLibconfig.h"
+#include "McuGPIO.h"
+
+/* card detect pin */
+#ifndef McuFatFS_CONFIG_HAS_CARD_DETECT_PIN
+  #define McuFatFS_CONFIG_HAS_CARD_DETECT_PIN (0)
+    /*!< 1: has card detection pin. 0: no card detection pin */
+#endif
+#if McuFatFS_CONFIG_HAS_CARD_DETECT_PIN
+  #ifndef McuFatFS_CONFIG_CARD_DETECT_GPIO
+    #define McuFatFS_CONFIG_CARD_DETECT_GPIO            GPIOC
+  #endif
+  #ifndef McuFatFS_CONFIG_CARD_DETECT_PORT
+    #define McuFatFS_CONFIG_CARD_DETECT_PORT            PORTC
+  #endif
+  #ifndef McuFatFS_CONFIG_CARD_DETECT_PIN
+    #define McuFatFS_CONFIG_CARD_DETECT_PIN             0U
+  #endif
+  #ifndef McuFatFS_CONFIG_CARD_DETECT_PULL
+    #define McuFatFS_CONFIG_CARD_DETECT_PULL            McuGPIO_PULL_DOWN
+      /*!< type of pull, use McuGPIO_PULL_DISABLE for no pull resistor configuration */
+  #endif
+  #ifndef McuFatFS_CONFIG_CARD_DETECT_IOCON
+    #define McuFatFS_CONFIG_CARD_DETECT_IOCON           /*IOCON_INDEX_PIO0_4*/
+      /*!< For LPC Cortex-M0 only */
+  #endif
+#ifndef McuFatFS_CONFIG_CARD_DETECT_IS_HIGH_ACTIVE
+  #define McuFatFS_CONFIG_CARD_DETECT_IS_HIGH_ACTIVE   (1)
+    /*!< 1: pin is HIGH active for card present; 0: pin is LOW active if card is present */
+#endif
+
+#endif /* McuFatFS_CONFIG_HAS_CARD_DETECT_PIN */
+
+
+/* write protection pin */
+#ifndef McuFatFS_CONFIG_HAS_WRITE_PROTECT_PIN
+  #define McuFatFS_CONFIG_HAS_WRITE_PROTECT_PIN (0)
+    /*!< 1: has write protection pin. 0: no card write protection pin */
+#endif
+#if McuFatFS_CONFIG_HAS_WRITE_PROTECT_PIN
+  #ifndef McuFatFS_CONFIG_WRITE_PROTECT_GPIO
+    #define McuFatFS_CONFIG_WRITE_PROTECT_GPIO            GPIOC
+  #endif
+  #ifndef McuFatFS_CONFIG_WRITE_PROTECT_PORT
+    #define McuFatFS_CONFIG_WRITE_PROTECT_PORT            PORTC
+  #endif
+  #ifndef McuFatFS_CONFIG_WRITE_PROTECT_PIN
+    #define McuFatFS_CONFIG_WRITE_PROTECT_PIN             1U
+  #endif
+  #ifndef McuFatFS_CONFIG_WRITE_PROTECT_PULL
+    #define McuFatFS_CONFIG_WRITE_PROTECT_PULL            McuGPIO_PULL_DOWN
+      /*!< type of pull, use McuGPIO_PULL_DISABLE for no pull resistor configuration */
+  #endif
+  #ifndef McuFatFS_CONFIG_WRITE_PROTECT_IOCON
+    #define McuFatFS_CONFIG_WRITE_PROTECT_IOCON           /*IOCON_INDEX_PIO0_5*/
+      /*!< For LPC Cortex-M0 only */
+  #endif
+#ifndef McuFatFS_CONFIG_WRITE_PROTECT_IS_HIGH_ACTIVE
+  #define McuFatFS_CONFIG_WRITE_PROTECT_IS_HIGH_ACTIVE    (1)
+    /*!< 1: pin is HIGH active for write protection; 0: pin is LOW active if card is write protected */
+#endif
+
+#endif /* McuFatFS_CONFIG_HAS_WRITE_PROTECTION_PIN */
+
+
+/* example configurations below: */
+#if 0 /* tinyK22 */
+  #define McuFatFS_CONFIG_HAS_CARD_DETECT_PIN           (1)
+  #define McuFatFS_CONFIG_CARD_DETECT_GPIO              GPIOC
+  #define McuFatFS_CONFIG_CARD_DETECT_PORT              PORTC
+  #define McuFatFS_CONFIG_CARD_DETECT_PIN               0U
+  #define McuFatFS_CONFIG_CARD_DETECT_PULL              McuGPIO_PULL_DOWN
+  #define McuFatFS_CONFIG_CARD_DETECT_IS_HIGH_ACTIVE    (1)
+  #define McuFatFS_CONFIG_HAS_WRITE_PROTECT_PIN         (0)
+#elif 0 /* LPC55S16*/
+  #define McuFatFS_CONFIG_HAS_CARD_DETECT_PIN           (1)
+  #define McuFatFS_CONFIG_CARD_DETECT_GPIO              GPIO
+  #define McuFatFS_CONFIG_CARD_DETECT_PORT              0
+  #define McuFatFS_CONFIG_CARD_DETECT_PIN               16U
+  #define McuFatFS_CONFIG_CARD_DETECT_PULL              McuGPIO_PULL_DISABLE /* https://www.pololu.com/product/2587 */
+  #define McuFatFS_CONFIG_CARD_DETECT_IS_HIGH_ACTIVE    (1)  /*  https://www.pololu.com/product/2587 */
+  #define McuFatFS_CONFIG_HAS_WRITE_PROTECT_PIN         (0)
+#endif
+
+#ifdef __cplusplus
+}  /* extern "C" */
+#endif
+
+#endif /* MCUFATFS_CARDPINS_CONFIG_H_ */