doc: renamed project
This commit is contained in:
SylvanArnold
committed by
Sylvan Arnold
Sylvan Arnold
parent
244e516bd8
commit
32618389d1
284
pico-sensor/McuLib/config/McuShellUartconfig.h
Normal file
284
pico-sensor/McuLib/config/McuShellUartconfig.h
Normal file
@@ -0,0 +1,284 @@
|
||||
/*!
|
||||
* Copyright (c) 2020-2024, Erich Styger
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
* \file
|
||||
* \brief \brief Configuration items for the McuShellUart module.
|
||||
*/
|
||||
|
||||
#ifndef MCUSHELLUARTCONFIG_H_
|
||||
#define MCUSHELLUARTCONFIG_H_
|
||||
|
||||
/* supported UART implementation: */
|
||||
#define McuShellUart_CONFIG_UART_NONE (0)
|
||||
/* LPC845 */
|
||||
#define McuShellUart_CONFIG_UART_LPC845_USART0 (1) /* Rx on pin 20 (PIO0_24), Tx on pin 19 (PIO0_25) */
|
||||
/* Kinetis K22FX */
|
||||
#define McuShellUart_CONFIG_UART_K22FX512_UART0_A1_A2 (2) /* Rx on PTA1 (pin 27), Tx on PTA2 (pin 28) */
|
||||
#define McuShellUart_CONFIG_UART_K22FX512_UART1_E1_E0 (3) /* Rx on PTE1 (pin 2), Tx on PTE2 (pin 1) */
|
||||
/* Kinetis K22FN */
|
||||
#define McuShellUart_CONFIG_UART_K22FN512_LPUART0_C3_C4 (4) /* PTC3: Rx, (pin 46), PTC4: Tx (pin 49) (OpenSDA UART on tinyK22) */
|
||||
#define McuShellUart_CONFIG_UART_K22FN512_UART0_B16_B17 (5) /* PTB16 (Rx), PTB17 (Tx) */
|
||||
#define McuShellUart_CONFIG_UART_K22FN512_UART1_E1_E0 (6) /* PTE1 (Rx), PTE0 (Tx) (OpenSDA UART on FRDM-K22F) */
|
||||
/* Kinetis K64FN1M */
|
||||
#define McuShellUart_CONFIG_UART_K64FN1M_UART0_B16_B17 (7) /* PTB16 (Rx), PTB17 (Tx) */
|
||||
/* LPC55S16 */
|
||||
#define McuShellUart_CONFIG_UART_LPC55S16_USART0 (8) /* FlexComm0, pin 92 (Rx) and pin 94 (Tx) */
|
||||
#define McuShellUart_CONFIG_UART_LPC55S16_USART2 (9) /* FlexComm2, pin 3 (Rx) and pin 27 (Tx) */
|
||||
/* LPC55S69 */
|
||||
#define McuShellUart_CONFIG_UART_LPC55S69_USART0 (10) /* FlexComm0, P0_29, pin92 (Rx) and P0_30, pin94 (Tx) */
|
||||
/* RP2040 */
|
||||
#define McuShellUart_CONFIG_UART_RP2040_UART1_GPIO4_GPIO5 (11) /* UART1 with Tx on GPIO4 and Rx on GPIO5 */
|
||||
|
||||
/* default UART used */
|
||||
#ifndef McuShellUart_CONFIG_UART
|
||||
#define McuShellUart_CONFIG_UART McuShellUart_CONFIG_UART_NONE
|
||||
#endif
|
||||
|
||||
#ifndef McuShellUart_CONFIG_DO_MUXING
|
||||
#define McuShellUart_CONFIG_DO_PIN_MUXING (1)
|
||||
/*!< 1: Do the pin muxing in the Init(); 0: no pin muxing is done in the Init() */
|
||||
#endif
|
||||
|
||||
/* UART configuration items */
|
||||
#if McuShellUart_CONFIG_UART==McuShellUart_CONFIG_UART_NONE
|
||||
/* no UART used */
|
||||
#elif McuShellUart_CONFIG_UART==McuShellUart_CONFIG_UART_LPC845_USART0
|
||||
#include "fsl_usart.h"
|
||||
#include "fsl_swm.h"
|
||||
#define McuShellUart_CONFIG_UART_DEVICE USART0
|
||||
#define McuShellUart_CONFIG_UART_SET_UART_CLOCK() CLOCK_Select(kUART0_Clk_From_MainClk) /* Select the main clock as source clock of USART0. */
|
||||
#define McuShellUart_CONFIG_UART_WRITE_BLOCKING USART_WriteBlocking
|
||||
#define McuShellUart_CONFIG_UART_GET_FLAGS USART_GetStatusFlags
|
||||
#define McuShellUart_CONFIG_UART_HW_RX_READY_FLAGS (kUSART_RxReady|kUSART_HardwareOverrunFlag)
|
||||
#define McuShellUart_CONFIG_UART_READ_BYTE USART_ReadByte
|
||||
#define McuShellUart_CONFIG_UART_CONFIG_STRUCT usart_config_t
|
||||
#define McuShellUart_CONFIG_UART_GET_DEFAULT_CONFIG USART_GetDefaultConfig
|
||||
#define McuShellUart_CONFIG_UART_ENABLE_INTERRUPTS USART_EnableInterrupts
|
||||
#define McuShellUart_CONFIG_UART_ENABLE_INTERRUPT_FLAGS (kUSART_RxReadyInterruptEnable | kUSART_HardwareOverRunInterruptEnable)
|
||||
#define McuShellUart_CONFIG_UART_IRQ_NUMBER USART0_IRQn
|
||||
#define McuShellUart_CONFIG_UART_INIT USART_Init
|
||||
#ifndef McuShellUart_CONFIG_UART_GET_CLOCK_FREQ_SELECT
|
||||
#define McuShellUart_CONFIG_UART_GET_CLOCK_FREQ_SELECT kCLOCK_MainClk
|
||||
#endif
|
||||
#define McuShellUart_CONFIG_UART_IRQ_HANDLER USART0_IRQHandler
|
||||
#define McuShellUART_CONFIG_CLEAR_STATUS_FLAGS USART_ClearStatusFlags
|
||||
#define McuShellUART_CONFIG_CLEAR_EXTRA_STATUS_FLAGS (0) /* no extra flags to clear */
|
||||
#define McuShellUart_CONFIG_HAS_FIFO (0)
|
||||
#elif McuShellUart_CONFIG_UART==McuShellUart_CONFIG_UART_LPC55S16_USART0
|
||||
#include "fsl_usart.h"
|
||||
#include "fsl_iocon.h"
|
||||
#define McuShellUart_CONFIG_UART_DEVICE USART0
|
||||
#define McuShellUart_CONFIG_UART_SET_UART_CLOCK() CLOCK_AttachClk(kFRO12M_to_FLEXCOMM0)
|
||||
#define McuShellUart_CONFIG_UART_WRITE_BLOCKING USART_WriteBlocking
|
||||
#define McuShellUart_CONFIG_UART_GET_FLAGS USART_GetStatusFlags
|
||||
#define McuShellUart_CONFIG_UART_HW_RX_READY_FLAGS (kUSART_RxFifoNotEmptyFlag | kUSART_RxError)
|
||||
#define McuShellUart_CONFIG_UART_READ_BYTE USART_ReadByte
|
||||
#define McuShellUart_CONFIG_UART_CONFIG_STRUCT usart_config_t
|
||||
#define McuShellUart_CONFIG_UART_GET_DEFAULT_CONFIG USART_GetDefaultConfig
|
||||
#define McuShellUart_CONFIG_UART_ENABLE_INTERRUPTS USART_EnableInterrupts
|
||||
#define McuShellUart_CONFIG_UART_ENABLE_INTERRUPT_FLAGS (kUSART_RxLevelInterruptEnable | kUSART_RxErrorInterruptEnable)
|
||||
#define McuShellUart_CONFIG_UART_IRQ_NUMBER FLEXCOMM0_IRQn
|
||||
#define McuShellUart_CONFIG_UART_INIT USART_Init
|
||||
#ifndef McuShellUart_CONFIG_UART_GET_CLOCK_FREQ_SELECT
|
||||
#define McuShellUart_CONFIG_UART_GET_CLOCK_FREQ_SELECT kCLOCK_Fro12M
|
||||
#endif
|
||||
#define McuShellUart_CONFIG_UART_IRQ_HANDLER FLEXCOMM0_IRQHandler
|
||||
#define McuShellUART_CONFIG_CLEAR_STATUS_FLAGS USART_ClearStatusFlags
|
||||
#define McuShellUART_CONFIG_CLEAR_EXTRA_STATUS_FLAGS (0) /* no extra flags to clear */
|
||||
#define McuShellUart_CONFIG_HAS_FIFO (0) /* not sure? */
|
||||
#elif McuShellUart_CONFIG_UART==McuShellUart_CONFIG_UART_LPC55S16_USART2
|
||||
#include "fsl_usart.h"
|
||||
#include "fsl_iocon.h"
|
||||
|
||||
#define McuShellUart_CONFIG_UART_DEVICE USART2
|
||||
#define McuShellUart_CONFIG_UART_SET_UART_CLOCK() CLOCK_AttachClk(kFRO12M_to_FLEXCOMM2)
|
||||
#define McuShellUart_CONFIG_UART_WRITE_BLOCKING USART_WriteBlocking
|
||||
#define McuShellUart_CONFIG_UART_GET_FLAGS USART_GetStatusFlags
|
||||
#define McuShellUart_CONFIG_UART_HW_RX_READY_FLAGS (kUSART_RxFifoNotEmptyFlag | kUSART_RxError)
|
||||
#define McuShellUart_CONFIG_UART_READ_BYTE USART_ReadByte
|
||||
#define McuShellUart_CONFIG_UART_CONFIG_STRUCT usart_config_t
|
||||
#define McuShellUart_CONFIG_UART_GET_DEFAULT_CONFIG USART_GetDefaultConfig
|
||||
#define McuShellUart_CONFIG_UART_ENABLE_INTERRUPTS USART_EnableInterrupts
|
||||
#define McuShellUart_CONFIG_UART_ENABLE_INTERRUPT_FLAGS (kUSART_RxLevelInterruptEnable | kUSART_RxErrorInterruptEnable)
|
||||
#define McuShellUart_CONFIG_UART_IRQ_NUMBER FLEXCOMM2_IRQn
|
||||
#define McuShellUart_CONFIG_UART_INIT USART_Init
|
||||
#ifndef McuShellUart_CONFIG_UART_GET_CLOCK_FREQ_SELECT
|
||||
#define McuShellUart_CONFIG_UART_GET_CLOCK_FREQ_SELECT kCLOCK_Fro12M
|
||||
#endif
|
||||
#define McuShellUart_CONFIG_UART_IRQ_HANDLER FLEXCOMM2_IRQHandler
|
||||
#define McuShellUART_CONFIG_CLEAR_STATUS_FLAGS USART_ClearStatusFlags
|
||||
#define McuShellUART_CONFIG_CLEAR_EXTRA_STATUS_FLAGS (0) /* no extra flags to clear */
|
||||
#define McuShellUart_CONFIG_HAS_FIFO (0) /* not sure? */
|
||||
#elif McuShellUart_CONFIG_UART==McuShellUart_CONFIG_UART_LPC55S69_USART0
|
||||
#include "fsl_usart.h"
|
||||
#include "fsl_iocon.h"
|
||||
#define McuShellUart_CONFIG_UART_DEVICE USART0
|
||||
#define McuShellUart_CONFIG_UART_SET_UART_CLOCK() CLOCK_AttachClk(kFRO12M_to_FLEXCOMM0)
|
||||
#define McuShellUart_CONFIG_UART_WRITE_BLOCKING USART_WriteBlocking
|
||||
#define McuShellUart_CONFIG_UART_GET_FLAGS USART_GetStatusFlags
|
||||
#define McuShellUart_CONFIG_UART_HW_RX_READY_FLAGS (kUSART_RxFifoNotEmptyFlag | kUSART_RxError)
|
||||
#define McuShellUart_CONFIG_UART_READ_BYTE USART_ReadByte
|
||||
#define McuShellUart_CONFIG_UART_CONFIG_STRUCT usart_config_t
|
||||
#define McuShellUart_CONFIG_UART_GET_DEFAULT_CONFIG USART_GetDefaultConfig
|
||||
#define McuShellUart_CONFIG_UART_ENABLE_INTERRUPTS USART_EnableInterrupts
|
||||
#define McuShellUart_CONFIG_UART_ENABLE_INTERRUPT_FLAGS (kUSART_RxLevelInterruptEnable | kUSART_RxErrorInterruptEnable)
|
||||
#define McuShellUart_CONFIG_UART_IRQ_NUMBER FLEXCOMM0_IRQn
|
||||
#define McuShellUart_CONFIG_UART_INIT USART_Init
|
||||
#ifndef McuShellUart_CONFIG_UART_GET_CLOCK_FREQ_SELECT
|
||||
#define McuShellUart_CONFIG_UART_GET_CLOCK_FREQ_SELECT kCLOCK_Fro12M
|
||||
#endif
|
||||
#define McuShellUart_CONFIG_UART_IRQ_HANDLER FLEXCOMM0_IRQHandler
|
||||
#define McuShellUART_CONFIG_CLEAR_STATUS_FLAGS USART_ClearStatusFlags
|
||||
#define McuShellUART_CONFIG_CLEAR_EXTRA_STATUS_FLAGS (0) /* no extra flags to clear */
|
||||
#define McuShellUart_CONFIG_HAS_FIFO (0) /* not sure? */
|
||||
#elif McuShellUart_CONFIG_UART==McuShellUart_CONFIG_UART_K22FX512_UART0_A1_A2
|
||||
/* UART0 on K22FX512 */
|
||||
#include "fsl_uart.h"
|
||||
#include "fsl_port.h"
|
||||
#define McuShellUart_CONFIG_UART_DEVICE UART0
|
||||
#define McuShellUart_CONFIG_UART_SET_UART_CLOCK() /* nothing needed */
|
||||
#define McuShellUart_CONFIG_UART_WRITE_BLOCKING UART_WriteBlocking
|
||||
#define McuShellUart_CONFIG_UART_GET_FLAGS UART_GetStatusFlags
|
||||
#define McuShellUart_CONFIG_UART_HW_RX_READY_FLAGS (kUART_RxDataRegFullFlag|kUART_RxOverrunFlag)
|
||||
#define McuShellUart_CONFIG_UART_READ_BYTE UART_ReadByte
|
||||
#define McuShellUart_CONFIG_UART_CONFIG_STRUCT uart_config_t
|
||||
#define McuShellUart_CONFIG_UART_GET_DEFAULT_CONFIG UART_GetDefaultConfig
|
||||
#define McuShellUart_CONFIG_UART_ENABLE_INTERRUPTS UART_EnableInterrupts
|
||||
#define McuShellUart_CONFIG_UART_ENABLE_INTERRUPT_FLAGS (kUART_RxDataRegFullInterruptEnable | kUART_RxOverrunInterruptEnable)
|
||||
#define McuShellUart_CONFIG_UART_IRQ_NUMBER UART0_RX_TX_IRQn
|
||||
#define McuShellUart_CONFIG_UART_INIT UART_Init
|
||||
#ifndef McuShellUart_CONFIG_UART_GET_CLOCK_FREQ_SELECT
|
||||
#define McuShellUart_CONFIG_UART_GET_CLOCK_FREQ_SELECT kCLOCK_CoreSysClk
|
||||
#endif
|
||||
#define McuShellUart_CONFIG_UART_IRQ_HANDLER UART0_RX_TX_IRQHandler
|
||||
#define McuShellUART_CONFIG_CLEAR_STATUS_FLAGS UART_ClearStatusFlags
|
||||
#define McuShellUART_CONFIG_CLEAR_EXTRA_STATUS_FLAGS (kUART_RxOverrunFlag|kUART_RxFifoOverflowFlag)
|
||||
#define McuShellUart_CONFIG_HAS_FIFO (1)
|
||||
#elif McuShellUart_CONFIG_UART==McuShellUart_CONFIG_UART_K22FN512_UART0_B16_B17
|
||||
#include "fsl_uart.h"
|
||||
#include "fsl_port.h"
|
||||
#define McuShellUart_CONFIG_UART_DEVICE UART0
|
||||
#define McuShellUart_CONFIG_UART_SET_UART_CLOCK() /* nothing needed */
|
||||
#define McuShellUart_CONFIG_UART_WRITE_BLOCKING UART_WriteBlocking
|
||||
#define McuShellUart_CONFIG_UART_GET_FLAGS UART_GetStatusFlags
|
||||
#define McuShellUart_CONFIG_UART_HW_RX_READY_FLAGS (kUART_RxDataRegFullFlag|kUART_RxOverrunFlag)
|
||||
#define McuShellUart_CONFIG_UART_READ_BYTE UART_ReadByte
|
||||
#define McuShellUart_CONFIG_UART_CONFIG_STRUCT uart_config_t
|
||||
#define McuShellUart_CONFIG_UART_GET_DEFAULT_CONFIG UART_GetDefaultConfig
|
||||
#define McuShellUart_CONFIG_UART_ENABLE_INTERRUPTS UART_EnableInterrupts
|
||||
#define McuShellUart_CONFIG_UART_ENABLE_INTERRUPT_FLAGS (kUART_RxDataRegFullInterruptEnable | kUART_RxOverrunInterruptEnable)
|
||||
#define McuShellUart_CONFIG_UART_IRQ_NUMBER UART0_RX_TX_IRQn
|
||||
#define McuShellUart_CONFIG_UART_INIT UART_Init
|
||||
#ifndef McuShellUart_CONFIG_UART_GET_CLOCK_FREQ_SELECT
|
||||
#define McuShellUart_CONFIG_UART_GET_CLOCK_FREQ_SELECT kCLOCK_CoreSysClk
|
||||
#endif
|
||||
#define McuShellUart_CONFIG_UART_IRQ_HANDLER UART0_RX_TX_IRQHandler
|
||||
#define McuShellUART_CONFIG_CLEAR_STATUS_FLAGS UART_ClearStatusFlags
|
||||
#define McuShellUART_CONFIG_CLEAR_EXTRA_STATUS_FLAGS (kUART_RxOverrunFlag|kUART_RxFifoOverflowFlag)
|
||||
#define McuShellUart_CONFIG_HAS_FIFO (1)
|
||||
#elif McuShellUart_CONFIG_UART==McuShellUart_CONFIG_UART_K22FN512_UART1_E1_E0
|
||||
/* UART1 on K22FN512. Mux the pins using the pins muxing tool */
|
||||
#include "fsl_uart.h"
|
||||
#include "fsl_port.h"
|
||||
#define McuShellUart_CONFIG_UART_DEVICE UART1
|
||||
#define McuShellUart_CONFIG_UART_SET_UART_CLOCK() /* nothing needed */
|
||||
#define McuShellUart_CONFIG_UART_WRITE_BLOCKING UART_WriteBlocking
|
||||
#define McuShellUart_CONFIG_UART_GET_FLAGS UART_GetStatusFlags
|
||||
#define McuShellUart_CONFIG_UART_HW_RX_READY_FLAGS (kUART_RxDataRegFullFlag|kUART_RxOverrunFlag)
|
||||
#define McuShellUart_CONFIG_UART_READ_BYTE UART_ReadByte
|
||||
#define McuShellUart_CONFIG_UART_CONFIG_STRUCT uart_config_t
|
||||
#define McuShellUart_CONFIG_UART_GET_DEFAULT_CONFIG UART_GetDefaultConfig
|
||||
#define McuShellUart_CONFIG_UART_ENABLE_INTERRUPTS UART_EnableInterrupts
|
||||
#define McuShellUart_CONFIG_UART_ENABLE_INTERRUPT_FLAGS (kUART_RxDataRegFullInterruptEnable | kUART_RxOverrunInterruptEnable)
|
||||
#define McuShellUart_CONFIG_UART_IRQ_NUMBER UART1_RX_TX_IRQn
|
||||
#define McuShellUart_CONFIG_UART_INIT UART_Init
|
||||
#ifndef McuShellUart_CONFIG_UART_GET_CLOCK_FREQ_SELECT
|
||||
#define McuShellUart_CONFIG_UART_GET_CLOCK_FREQ_SELECT kCLOCK_CoreSysClk
|
||||
#endif
|
||||
#define McuShellUart_CONFIG_UART_IRQ_HANDLER UART1_RX_TX_IRQHandler
|
||||
#define McuShellUART_CONFIG_CLEAR_STATUS_FLAGS UART_ClearStatusFlags
|
||||
#define McuShellUART_CONFIG_CLEAR_EXTRA_STATUS_FLAGS (kUART_RxOverrunFlag|kUART_RxFifoOverflowFlag)
|
||||
#define McuShellUart_CONFIG_HAS_FIFO (1)
|
||||
#elif McuShellUart_CONFIG_UART==McuShellUart_CONFIG_UART_K22FN512_LPUART0_C3_C4
|
||||
/* LPUART on K22FN512 */
|
||||
#include "fsl_lpuart.h"
|
||||
#include "fsl_port.h"
|
||||
#define McuShellUart_CONFIG_UART_DEVICE LPUART0
|
||||
/*! LPUARTSRC - LPUART clock source select
|
||||
* 0b00..Clock disabled
|
||||
* 0b01..MCGFLLCLK , or MCGPLLCLK , or IRC48M clock as selected by SOPT2[PLLFLLSEL].
|
||||
* 0b10..OSCERCLK clock
|
||||
* 0b11..MCGIRCLK clock
|
||||
*/
|
||||
#define SIM_LPUART_CLK_SEL_PLLFLLSEL_CLK 1U /*!< LPUART clock select: PLLFLLSEL output clock */
|
||||
#define McuShellUart_CONFIG_UART_SET_UART_CLOCK() CLOCK_SetLpuartClock(SIM_LPUART_CLK_SEL_PLLFLLSEL_CLK)
|
||||
#define McuShellUart_CONFIG_UART_WRITE_BLOCKING LPUART_WriteBlocking
|
||||
#define McuShellUart_CONFIG_UART_GET_FLAGS LPUART_GetStatusFlags
|
||||
#define McuShellUart_CONFIG_UART_HW_RX_READY_FLAGS (kLPUART_RxDataRegFullFlag|kLPUART_RxOverrunFlag)
|
||||
#define McuShellUart_CONFIG_UART_READ_BYTE LPUART_ReadByte
|
||||
#define McuShellUart_CONFIG_UART_CONFIG_STRUCT lpuart_config_t
|
||||
#define McuShellUart_CONFIG_UART_GET_DEFAULT_CONFIG LPUART_GetDefaultConfig
|
||||
#define McuShellUart_CONFIG_UART_ENABLE_INTERRUPTS LPUART_EnableInterrupts
|
||||
#define McuShellUart_CONFIG_UART_ENABLE_INTERRUPT_FLAGS (kLPUART_RxDataRegFullInterruptEnable)
|
||||
#define McuShellUart_CONFIG_UART_IRQ_NUMBER LPUART0_IRQn
|
||||
#define McuShellUart_CONFIG_UART_INIT LPUART_Init
|
||||
#ifndef McuShellUart_CONFIG_UART_GET_CLOCK_FREQ_SELECT
|
||||
#define McuShellUart_CONFIG_UART_GET_CLOCK_FREQ_SELECT /* kCLOCK_Osc0ErClkUndiv */ kCLOCK_PllFllSelClk /* has to match Clocks setting! */
|
||||
#endif
|
||||
#define McuShellUart_CONFIG_UART_IRQ_HANDLER LPUART0_IRQHandler
|
||||
#define McuShellUART_CONFIG_CLEAR_STATUS_FLAGS LPUART_ClearStatusFlags
|
||||
#define McuShellUART_CONFIG_CLEAR_EXTRA_STATUS_FLAGS (0) /* no extra flags to clear */
|
||||
#define McuShellUart_CONFIG_HAS_FIFO (0)
|
||||
#elif McuShellUart_CONFIG_UART==McuShellUart_CONFIG_UART_K64FN1M_UART0_B16_B17
|
||||
#include "fsl_uart.h"
|
||||
#include "fsl_port.h"
|
||||
#define McuShellUart_CONFIG_UART_DEVICE UART0
|
||||
#define McuShellUart_CONFIG_UART_SET_UART_CLOCK() /* nothing needed */
|
||||
#define McuShellUart_CONFIG_UART_WRITE_BLOCKING UART_WriteBlocking
|
||||
#define McuShellUart_CONFIG_UART_GET_FLAGS UART_GetStatusFlags
|
||||
#define McuShellUart_CONFIG_UART_HW_RX_READY_FLAGS (kUART_RxDataRegFullFlag|kUART_RxOverrunFlag)
|
||||
#define McuShellUart_CONFIG_UART_READ_BYTE UART_ReadByte
|
||||
#define McuShellUart_CONFIG_UART_CONFIG_STRUCT uart_config_t
|
||||
#define McuShellUart_CONFIG_UART_GET_DEFAULT_CONFIG UART_GetDefaultConfig
|
||||
#define McuShellUart_CONFIG_UART_ENABLE_INTERRUPTS UART_EnableInterrupts
|
||||
#define McuShellUart_CONFIG_UART_ENABLE_INTERRUPT_FLAGS (kUART_RxDataRegFullInterruptEnable | kUART_RxOverrunInterruptEnable)
|
||||
#define McuShellUart_CONFIG_UART_IRQ_NUMBER UART0_RX_TX_IRQn
|
||||
#define McuShellUart_CONFIG_UART_INIT UART_Init
|
||||
#ifndef McuShellUart_CONFIG_UART_GET_CLOCK_FREQ_SELECT
|
||||
#define McuShellUart_CONFIG_UART_GET_CLOCK_FREQ_SELECT kCLOCK_CoreSysClk
|
||||
#endif
|
||||
#define McuShellUart_CONFIG_UART_IRQ_HANDLER UART0_RX_TX_IRQHandler
|
||||
#define McuShellUART_CONFIG_CLEAR_STATUS_FLAGS UART_ClearStatusFlags
|
||||
#define McuShellUART_CONFIG_CLEAR_EXTRA_STATUS_FLAGS (kUART_RxOverrunFlag|kUART_RxFifoOverflowFlag)
|
||||
#define McuShellUart_CONFIG_HAS_FIFO (1)
|
||||
#elif McuShellUart_CONFIG_UART==McuShellUart_CONFIG_UART_RP2040_UART1_GPIO4_GPIO5
|
||||
#define McuShellUart_CONFIG_UART_SET_UART_CLOCK() /* nothing needed */
|
||||
#define McuShellUart_CONFIG_UART_WRITE_BLOCKING RP_WriteBlocking
|
||||
|
||||
#define McuShellUart_CONFIG_UART_DEVICE uart1
|
||||
#define McuShellUart_CONFIG_DATA_BITS 8
|
||||
#define McuShellUart_CONFIG_STOP_BITS 1
|
||||
#define McuShellUart_CONFIG_PARITY UART_PARITY_NONE
|
||||
|
||||
#define McuShellUart_CONFIG_UART_TX_PIN 4
|
||||
#define McuShellUart_CONFIG_UART_RX_PIN 5
|
||||
|
||||
#else
|
||||
/* you have to put your configuration here */
|
||||
#endif
|
||||
|
||||
#ifndef McuShellUart_CONFIG_UART_RX_QUEUE_LENGTH
|
||||
#define McuShellUart_CONFIG_UART_RX_QUEUE_LENGTH (McuShell_CONFIG_DEFAULT_SHELL_BUFFER_SIZE)
|
||||
#endif
|
||||
|
||||
#ifndef McuShellUart_CONFIG_UART_BAUDRATE
|
||||
#define McuShellUart_CONFIG_UART_BAUDRATE 115200
|
||||
#endif
|
||||
|
||||
#ifndef McuShellUart_CONFIG_USE_FREERTOS
|
||||
#define McuShellUart_CONFIG_USE_FREERTOS (McuLib_CONFIG_SDK_USE_FREERTOS)
|
||||
/*!< If FreeRTOS (Queues) shall be used or not */
|
||||
#endif
|
||||
|
||||
#endif /* MCUSHELLUARTCONFIG_H_ */
|
||||
Reference in New Issue
Block a user