doc: renamed project
This commit is contained in:
SylvanArnold
committed by
Sylvan Arnold
Sylvan Arnold
parent
244e516bd8
commit
32618389d1
212
pico-sensor/McuLib/src/McuSHT40.c
Normal file
212
pico-sensor/McuLib/src/McuSHT40.c
Normal file
@@ -0,0 +1,212 @@
|
||||
/*
|
||||
* Copyright (c) 2019, 2022 Erich Styger
|
||||
* All rights reserved.
|
||||
*
|
||||
* Driver for the Sensirion SHT40 Temperature/Humidity sensor
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
||||
#include "McuSHT40config.h"
|
||||
#include "McuSHT40.h"
|
||||
#include "McuGenericI2C.h"
|
||||
#include "McuUtility.h"
|
||||
#include <stddef.h> /* for NULL */
|
||||
|
||||
#define SHT40_MEAS_HIGHREP 0xFD
|
||||
#define SHT40_MEAS_MEDREP 0xF6
|
||||
#define SHT40_MEAS_LOWREP 0xE0
|
||||
|
||||
#define SHT40_READSERIALNUM 0x89
|
||||
|
||||
#define SHT40_SOFTRESET 0x94
|
||||
|
||||
#define SHT40_HEATER_200MW_1000MS_PRECISION_HIGH 0x39 /* activate heater with 200mW for 1s, including a high precision measurement just before deactivation */
|
||||
#define SHT40_HEATER_200MW_100MS_PRECISION_HIGH 0x32 /* activate heater with 200mW for 0.1s, including a high precision measurement just before deactivation */
|
||||
#define SHT40_HEATER_110MW_1000MS_PRECISION_HIGH 0x2F /* activate heater with 110mW for 1s, including a high precision measurement just before deactivation */
|
||||
#define SHT40_HEATER_110MW_100MS_PRECISION_HIGH 0x24 /* activate heater with 110mW for 0.1s, including a high precision measurement just before deactivation */
|
||||
#define SHT40_HEATER_20MW_1000MS_PRECISION_HIGH 0x1E /* activate heater with 20mW for 1s, including a high precision measurement just before deactivation */
|
||||
#define SHT40_HEATER_20MW_100MS_PRECISION_HIGH 0x15 /* activate heater with 20mW for 0.1s, including a high precision measurement just before deactivation */
|
||||
|
||||
|
||||
/* status bits of the Status register (0xF32D) */
|
||||
#define SHT40_STATUS_ALERT_PENDING (1<<15) /* 0: no pending alert, 1: at least one pending alert */
|
||||
#define SHT40_STATUS_HEATER_ON (1<<13) /* 0: heater OFF, 1: heater ON */
|
||||
#define SHT40_STATUS_RH_TRACKING_ALERT (1<<11) /* 0: no RH tracking alert, 1: alert */
|
||||
#define SHT40_STATUS_T_TRACKING_ALERT (1<<10) /* 0: no T tracking alert, 1: alert */
|
||||
#define SHT40_STATUS_SYSTEM_RESET (1<<4) /* 0: no reset detected since last clear status register command, 1: reset detected (hard reset, soft reset or supply fail */
|
||||
#define SHT40_STATUS_CMD_STATUS (1<<1) /* 0: last command executed successfully; 1: last command not processed, it was either invalid, failed the internal command checksum */
|
||||
#define SHT40_STATUS_WRITE_CRC_STATUS (1<<0) /* 0: checksum of last write transfer was correct, 1: checksum of last write transfer failed */
|
||||
|
||||
#define SHT40_CRC8_POLYNOMIAL 0x31 /* Seed for CRC polynomial */
|
||||
#define SHT40_CRC8_INIT 0xFF /* Init value for CRC */
|
||||
|
||||
static uint8_t SHT40_GenerateCRC(uint8_t *data, uint8_t datalen) {
|
||||
/* calculates 8-Bit checksum with given polynomial */
|
||||
uint8_t crc = SHT40_CRC8_INIT;
|
||||
uint8_t b;
|
||||
uint8_t i;
|
||||
|
||||
for (i=0; i<datalen; i++) {
|
||||
crc ^= data[i];
|
||||
for (b=0; b<8; b++) {
|
||||
if (crc & 0x80) {
|
||||
crc = (crc<<1)^SHT40_CRC8_POLYNOMIAL;
|
||||
} else {
|
||||
crc <<= 1;
|
||||
}
|
||||
}
|
||||
}
|
||||
return crc;
|
||||
}
|
||||
|
||||
static uint8_t SHT40_WriteCommand(uint16_t cmd) {
|
||||
uint8_t buf[2];
|
||||
|
||||
buf[0] = cmd>>8;
|
||||
buf[1] = cmd&0xff;
|
||||
return McuGenericI2C_WriteAddress(McuSHT40_CONFIG_I2C_ADDR, buf, sizeof(buf), NULL, 0);
|
||||
}
|
||||
|
||||
uint8_t SHT40_ReadSerialNumber(uint32_t *serial) {
|
||||
uint8_t res;
|
||||
uint8_t cmd[1];
|
||||
uint8_t readbuffer[6];
|
||||
|
||||
cmd[0] = SHT40_READSERIALNUM;
|
||||
res = McuGenericI2C_ReadAddressWait(McuSHT40_CONFIG_I2C_ADDR, cmd, sizeof(cmd), 20, readbuffer, sizeof(readbuffer));
|
||||
if (res!=ERR_OK) {
|
||||
*serial = 0;
|
||||
return res;
|
||||
}
|
||||
*serial = (readbuffer[0]<<24)|(readbuffer[1]<<16);
|
||||
if (readbuffer[2] != SHT40_GenerateCRC(readbuffer, 2)) {
|
||||
return ERR_CRC;
|
||||
}
|
||||
|
||||
*serial |= (readbuffer[3]<<8)|readbuffer[4];
|
||||
if (readbuffer[5] != SHT40_GenerateCRC(readbuffer+3, 2)) {
|
||||
return ERR_CRC;
|
||||
}
|
||||
return res;
|
||||
}
|
||||
|
||||
uint8_t McuSHT40_Reset(void) {
|
||||
return SHT40_WriteCommand(SHT40_SOFTRESET);
|
||||
}
|
||||
|
||||
uint8_t McuSHT40_ReadTempHum(float *temperature, float *humidity) {
|
||||
float stemp, shum;
|
||||
uint16_t ST, SRH;
|
||||
uint8_t readbuffer[6];
|
||||
uint8_t res;
|
||||
uint8_t cmd[1];
|
||||
|
||||
cmd[0] = SHT40_MEAS_HIGHREP;
|
||||
res = McuGenericI2C_ReadAddressWait(McuSHT40_CONFIG_I2C_ADDR, cmd, sizeof(cmd), 20, readbuffer, sizeof(readbuffer));
|
||||
if (res!=ERR_OK) {
|
||||
return res;
|
||||
}
|
||||
ST = (readbuffer[0]<<8)|readbuffer[1];
|
||||
if (readbuffer[2] != SHT40_GenerateCRC(readbuffer, 2)) {
|
||||
return ERR_CRC;
|
||||
}
|
||||
|
||||
SRH = (readbuffer[3]<<8)|readbuffer[4];
|
||||
if (readbuffer[5] != SHT40_GenerateCRC(readbuffer+3, 2)) {
|
||||
return ERR_CRC;
|
||||
}
|
||||
|
||||
stemp = ST;
|
||||
stemp *= 175;
|
||||
stemp /= 0xffff;
|
||||
stemp = -45 + stemp;
|
||||
*temperature = stemp;
|
||||
|
||||
shum = SRH;
|
||||
shum *= 125;
|
||||
shum /= 0xFFFF;
|
||||
shum = -6 + shum;
|
||||
if (shum>100.0f) {
|
||||
shum = 100.0f;
|
||||
} else if (shum<0.0f) {
|
||||
shum = 0.0f;
|
||||
}
|
||||
*humidity = shum;
|
||||
|
||||
return ERR_OK;
|
||||
}
|
||||
|
||||
#if MCUSHT40_CONFIG_PARSE_COMMAND_ENABLED
|
||||
static uint8_t PrintStatus(const McuShell_StdIOType *io) {
|
||||
uint8_t buf[32];
|
||||
uint32_t serial;
|
||||
float temperature, humidity;
|
||||
uint8_t res;
|
||||
|
||||
McuShell_SendStatusStr((unsigned char*)"SHT40", (unsigned char*)"Sensirion SHT40 sensor status\r\n", io->stdOut);
|
||||
|
||||
McuUtility_strcpy(buf, sizeof(buf), (unsigned char*)"0x");
|
||||
McuUtility_strcatNum8Hex(buf, sizeof(buf), McuSHT40_CONFIG_I2C_ADDR);
|
||||
McuUtility_strcat(buf, sizeof(buf), (unsigned char*)"\r\n");
|
||||
McuShell_SendStatusStr((unsigned char*)" addr", buf, io->stdOut);
|
||||
|
||||
res = SHT40_ReadSerialNumber(&serial);
|
||||
if (res==ERR_OK) {
|
||||
McuUtility_strcpy(buf, sizeof(buf), (unsigned char*)"0x");
|
||||
McuUtility_strcatNum32Hex(buf, sizeof(buf), serial);
|
||||
McuUtility_strcat(buf, sizeof(buf), (unsigned char*)"\r\n");
|
||||
} else {
|
||||
McuUtility_strcpy(buf, sizeof(buf), (unsigned char*)"ERROR\r\n");
|
||||
}
|
||||
McuShell_SendStatusStr((unsigned char*)" serial", buf, io->stdOut);
|
||||
|
||||
if(McuSHT40_ReadTempHum(&temperature, &humidity)==ERR_OK) {
|
||||
McuUtility_NumFloatToStr(buf, sizeof(buf), temperature, 2);
|
||||
McuUtility_chcat(buf, sizeof(buf), '\xB0'); /* add '°' (ASCII 0xB0) it as single char, as with UTF-8 it might end up in two bytes inside a string */
|
||||
McuUtility_strcat(buf, sizeof(buf), (unsigned char*)"C\r\n");
|
||||
McuShell_SendStatusStr((unsigned char*)" temp", buf, io->stdOut);
|
||||
|
||||
McuUtility_NumFloatToStr(buf, sizeof(buf), humidity, 2);
|
||||
McuUtility_strcat(buf, sizeof(buf), (unsigned char*)" RH\r\n");
|
||||
McuShell_SendStatusStr((unsigned char*)" humidity", buf, io->stdOut);
|
||||
} else {
|
||||
McuShell_SendStatusStr((unsigned char*)" ERROR:", (unsigned char*)" *** ERROR reading sensor values\r\n", io->stdOut);
|
||||
}
|
||||
return ERR_OK;
|
||||
}
|
||||
|
||||
static uint8_t PrintHelp(const McuShell_StdIOType *io) {
|
||||
McuShell_SendHelpStr((unsigned char*)"SHT40", (unsigned char*)"Group of SHT40 commands\r\n", io->stdOut);
|
||||
McuShell_SendHelpStr((unsigned char*)" help|status", (unsigned char*)"Print help or status information\r\n", io->stdOut);
|
||||
return ERR_OK;
|
||||
}
|
||||
#endif /* MCUSHT40_CONFIG_PARSE_COMMAND_ENABLED */
|
||||
|
||||
#if MCUSHT40_CONFIG_PARSE_COMMAND_ENABLED
|
||||
uint8_t McuSHT40_ParseCommand(const unsigned char* cmd, bool *handled, const McuShell_StdIOType *io) {
|
||||
uint8_t res = ERR_OK;
|
||||
|
||||
if (McuUtility_strcmp((char*)cmd, McuShell_CMD_HELP) == 0
|
||||
|| McuUtility_strcmp((char*)cmd, "SHT40 help") == 0)
|
||||
{
|
||||
*handled = TRUE;
|
||||
return PrintHelp(io);
|
||||
} else if ( (McuUtility_strcmp((char*)cmd, McuShell_CMD_STATUS)==0)
|
||||
|| (McuUtility_strcmp((char*)cmd, "SHT40 status")==0)
|
||||
)
|
||||
{
|
||||
*handled = TRUE;
|
||||
res = PrintStatus(io);
|
||||
}
|
||||
return res;
|
||||
}
|
||||
#endif /* SHT40_CONFIG_PARSE_COMMAND_ENABLED */
|
||||
|
||||
void McuSHT40_Init(void) {
|
||||
/* noting to do */
|
||||
}
|
||||
|
||||
void McuSHT40_Deinit(void) {
|
||||
/* nothing to do */
|
||||
}
|
||||
Reference in New Issue
Block a user