doc: renamed project

pico-sensor/src/tusb_config.h

@@ -0,0 +1,143 @@
+#include "platform.h"
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#ifndef _TUSB_CONFIG_H_
+#define _TUSB_CONFIG_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if 1
+//--------------------------------------------------------------------+
+// Board Specific Configuration
+//--------------------------------------------------------------------+
+
+// #if CFG_TUSB_MCU == OPT_MCU_RP2040
+// // change to 1 if using pico-pio-usb as host controller for raspberry rp2040
+// #define CFG_TUH_RPI_PIO_USB   0
+// #define BOARD_TUH_RHPORT      CFG_TUH_RPI_PIO_USB
+// #endif
+
+// RHPort number used for host can be defined by board.mk, default to port 0
+#ifndef BOARD_TUH_RHPORT
+#define BOARD_TUH_RHPORT      0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+#ifndef BOARD_TUH_MAX_SPEED
+#define BOARD_TUH_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
+#endif
+
+#endif
+
+//--------------------------------------------------------------------
+// COMMON CONFIGURATION
+//--------------------------------------------------------------------
+
+#define CFG_TUSB_OS               /*OPT_OS_FREERTOS*/ OPT_OS_PICO 
+
+// Enable device stack
+#define CFG_TUD_ENABLED     1
+
+// Enable host stack with pio-usb if Pico-PIO-USB library is available
+#define CFG_TUH_ENABLED     1
+#define CFG_TUH_RPI_PIO_USB 1
+
+// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
+// #define CFG_TUSB_DEBUG           0
+
+/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
+ * Tinyusb use follows macros to declare transferring memory so that they can be put
+ * into those specific section.
+ * e.g
+ * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
+ * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
+ */
+#ifndef CFG_TUSB_MEM_SECTION
+#define CFG_TUSB_MEM_SECTION
+#endif
+
+#ifndef CFG_TUSB_MEM_ALIGN
+#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
+#endif
+
+//--------------------------------------------------------------------
+// DEVICE CONFIGURATION
+//--------------------------------------------------------------------
+
+#ifndef CFG_TUD_ENDPOINT0_SIZE
+#define CFG_TUD_ENDPOINT0_SIZE    64
+#endif
+
+//------------- CLASS -------------//
+#define CFG_TUD_CDC              1
+
+// CDC FIFO size of TX and RX
+#define CFG_TUD_CDC_RX_BUFSIZE   256
+#define CFG_TUD_CDC_TX_BUFSIZE   256
+
+// CDC Endpoint transfer buffer size, more is faster
+#define CFG_TUD_CDC_EP_BUFSIZE   64
+
+//--------------------------------------------------------------------
+// HOST CONFIGURATION
+//--------------------------------------------------------------------
+
+// Size of buffer to hold descriptors and other data used for enumeration
+#define CFG_TUH_ENUMERATION_BUFSIZE 256
+
+#define CFG_TUH_HUB                 1 /* number of supported hubs */
+#define CFG_TUH_MSC                 0 /* nof mass storage class */
+#define CFG_TUH_VENDOR              0
+
+// max device support (excluding hub device)
+#define CFG_TUH_DEVICE_MAX          (CFG_TUH_HUB ? 4 : 1) // hub typically has 4 ports
+
+//------------- HID -------------//
+#if PL_CONFIG_USE_USB_HOST_HID
+    #define CFG_TUH_HID                 4 // typical keyboard + mouse device can have 3-4 HID interfaces
+    #define CFG_TUH_HID_EPIN_BUFSIZE    64
+    #define CFG_TUH_HID_EPOUT_BUFSIZE   64
+#endif
+
+//------------- CDC -------------//
+#if PL_CONFIG_USE_USB_HOST_CDC
+  #define CFG_TUH_CDC                 1 /* nof communication device class */
+    // Set Line Control state on enumeration/mounted:
+    // DTR ( bit 0), RTS (bit 1)
+    #define CFG_TUH_CDC_LINE_CONTROL_ON_ENUM    0x03
+
+    // Set Line Coding on enumeration/mounted, value for cdc_line_coding_t
+    // bit rate = 115200, 1 stop bit, no parity, 8 bit data width
+    #define CFG_TUH_CDC_LINE_CODING_ON_ENUM   { 115200, CDC_LINE_CONDING_STOP_BITS_1, CDC_LINE_CODING_PARITY_NONE, 8 }
+#endif
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* _TUSB_CONFIG_H_ */