feat: added PicoW_Sensor code template

Credits to @ext-erich.styger that provided the template

TSM_PicoW_Sensor/McuLib/HD44780/DB71config.h

@@ -0,0 +1,87 @@
+/**
+ * \file
+ * \brief Configuration header file for SDK_BitIO
+ * Copyright (c) 2020, Erich Styger
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ * This header file is used to configure settings of the SDK Bit I/O module.
+ */
+
+#ifndef __DB71_CONFIG_H
+#define __DB71_CONFIG_H
+
+#if McuLib_CONFIG_SDK_VERSION_USED == McuLib_CONFIG_SDK_MCUXPRESSO_2_0
+  #include "pin_mux.h" /* include pin muxing header file */
+
+  #if defined(BOARD_INITPINS_DB71_PIN)
+    #define DB71_CONFIG_PIN_NUMBER    BOARD_INITPINS_DB71_PIN
+  #endif
+  #if defined(BOARD_INITPINS_DB71_GPIO)
+    #define DB71_CONFIG_GPIO_NAME     BOARD_INITPINS_DB71_GPIO
+  #endif
+  #if defined(BOARD_INITPINS_DB71_PORT)
+    #define DB71_CONFIG_PORT_NAME     BOARD_INITPINS_DB71_PORT
+  #endif
+#endif
+
+#ifndef DB71_CONFIG_PORT_NAME
+  #if McuLib_CONFIG_CPU_IS_IMXRT
+    #define DB71_CONFIG_PORT_NAME       GPIO1
+  #elif McuLib_CONFIG_CPU_IS_LPC
+    #define DB71_CONFIG_PORT_NAME       0
+  #else /* name from properties */
+    #define DB71_CONFIG_PORT_NAME       PORTA
+  #endif
+    /*!< name of PORT, is pointer to PORT_Type */
+#endif
+
+#ifndef DB71_CONFIG_GPIO_NAME
+  #if McuLib_CONFIG_CPU_IS_IMXRT
+    #define DB71_CONFIG_GPIO_NAME       GPIO1
+  #elif McuLib_CONFIG_CPU_IS_LPC
+    #define DB71_CONFIG_GPIO_NAME       GPIO
+  #elif McuLib_CONFIG_CPU_IS_KINETIS && McuLib_CONFIG_IS_KINETIS_KE
+    #define DB71_CONFIG_GPIO_NAME       0
+  #elif McuLib_CONFIG_CPU_IS_MCX
+    #define DB71_CONFIG_GPIO_NAME       GPIO0
+  #else /* name from properties */
+    #define DB71_CONFIG_GPIO_NAME       GPIOA
+  #endif
+    /*!< name of GPIO, is pointer to GPIO_Type, not used for S32K SDK */
+#endif
+
+#ifndef DB71_CONFIG_PIN_NUMBER
+  #define DB71_CONFIG_PIN_NUMBER      0u
+    /*!< number of pin, type unsigned integer */
+#endif
+
+#ifndef DB71_CONFIG_PIN_SYMBOL
+  #define DB71_CONFIG_PIN_SYMBOL      LED_RED
+    /*!< symbolic name for pin, used for NXP SDK V1.3 */
+#endif
+
+#ifndef DB71_CONFIG_INIT_PIN_VALUE
+  #define DB71_CONFIG_INIT_PIN_VALUE  0
+  /*!< 0: Pin data is initialized with 0 (low); 1: pin value is initialized with 1 (high) */
+#endif
+
+/* different types of pin direction settings */
+#define DB71_CONFIG_INIT_PIN_DIRECTION_NONE    (0)
+#define DB71_CONFIG_INIT_PIN_DIRECTION_INPUT   (1)
+#define DB71_CONFIG_INIT_PIN_DIRECTION_OUTPUT  (2)
+
+#ifndef DB71_CONFIG_INIT_PIN_DIRECTION
+  #define DB71_CONFIG_INIT_PIN_DIRECTION  DB71_CONFIG_INIT_PIN_DIRECTION_OUTPUT
+#endif
+
+#ifndef DB71_CONFIG_DO_PIN_MUXING
+  #define DB71_CONFIG_DO_PIN_MUXING  0
+  /*!< 1: perform pin muxing in Init(), 0: do not do pin muxing */
+#endif
+
+#ifndef DB71_CONFIG_PULL_RESISTOR
+  #define DB71_CONFIG_PULL_RESISTOR  0
+  /*!< pull resistor setting. 0: no pull resistor, 1: pull-up, 2: pull-down, 3: pull-up or no pull, 4: pull-down or no pull: 4: autoselect-pull */
+#endif
+
+#endif /* __DB71_CONFIG_H */