104 lines
4.0 KiB
C
104 lines
4.0 KiB
C
/**
|
|
* \file
|
|
* \brief Application configuration file for SSD1306 display driver
|
|
* Copyright (c) 2020, Erich Styger
|
|
* SPDX-License-Identifier: BSD-3-Clause
|
|
*
|
|
* This header file is a configuration header file to configure the module McuSSD1306 (SSD1306).
|
|
* You can configure the defines directly in this file or with the compiler -D option.
|
|
*/
|
|
|
|
#ifndef __McuSSD1306_CONFIG_H
|
|
#define __McuSSD1306_CONFIG_H
|
|
|
|
#ifndef McuSSD1306_CONFIG_I2C_HEADER_FILE
|
|
#define McuSSD1306_CONFIG_I2C_HEADER_FILE "McuGenericI2C.h"
|
|
/*!< Header file to be included for the SPI driver */
|
|
#endif
|
|
|
|
/* Which display is used: only one of the two options below can be enabled: */
|
|
#define McuSSD1306_CONFIG_SSD1306_SIZE_TYPE (12864)
|
|
/*!< either 12864 (128x64) or 12832 (128x32) */
|
|
|
|
#ifndef McuSSD1306_CONFIG_SSD1306_HAS_RST
|
|
#define McuSSD1306_CONFIG_SSD1306_HAS_RST (0)
|
|
#define McuSSD1306_CONFIG_SSD1306_RESET_LOW() Reset_ClrVal() /* RESET signal low (reset is low active) */
|
|
#define McuSSD1306_CONFIG_SSD1306_RESET_HIGH() Reset_SetVal() /* RESET signal high */
|
|
#define McuSSD1306_CONFIG_RESET_HEADER_FILE "ResetPin.h"
|
|
#endif
|
|
#if McuSSD1306_CONFIG_SSD1306_HAS_RST
|
|
#include McuSSD1306_CONFIG_RESET_HEADER_FILE /* reset pin interface */
|
|
#endif
|
|
|
|
#ifndef McuSSD1306_CONFIG_SSD1306_EXTERNAL
|
|
#define McuSSD1306_CONFIG_SSD1306_EXTERNAL (0)
|
|
/*!< set to 1 if external vcc is connected, otherwise 0 if internal dc/dc converter is used */
|
|
#endif
|
|
#ifndef McuSSD1306_CONFIG_SSD1306_I2C_ADDR
|
|
#define McuSSD1306_CONFIG_SSD1306_I2C_ADDR (60)
|
|
/*!< I2C 7bit (unshifted) device address, usually 0x3C (60) (0b11'1100) or 0x3D (61) (0b11'1101) */
|
|
#endif
|
|
|
|
#ifndef McuSSD1306_CONFIG_SSD1306_DRIVER_TYPE
|
|
#define McuSSD1306_CONFIG_SSD1306_DRIVER_TYPE (1306)
|
|
/*!< Either 1306 for SSD1306 or 1106 for SH1106 */
|
|
#endif
|
|
|
|
#ifndef McuSSD1306_CONFIG_SSD1306_START_COLUMN_OFFSET
|
|
#define McuSSD1306_CONFIG_SSD1306_START_COLUMN_OFFSET (0)
|
|
/*!< Some SH1106 displays need a start column of 2 instead of the default 0 */
|
|
#endif
|
|
|
|
#ifndef McuSSD1306_CONFIG_SSD1306_I2C_DELAY_US
|
|
#define McuSSD1306_CONFIG_SSD1306_I2C_DELAY_US (0)
|
|
/*!< I2C transaction delay in us */
|
|
#endif
|
|
|
|
#ifndef McuSSD1306_CONFIG_DYNAMIC_DISPLAY_ORIENTATION
|
|
#define McuSSD1306_CONFIG_DYNAMIC_DISPLAY_ORIENTATION (0)
|
|
/*!< 1: Use SetDisplayOrientation() to change display orientation at runtime; 0: fixed display orientation */
|
|
#endif
|
|
|
|
/* display orientation types used in macro below: */
|
|
#define McuSSD1306_CONFIG_ORIENTATION_PORTRAIT 0
|
|
#define McuSSD1306_CONFIG_ORIENTATION_PORTRAIT180 1
|
|
#define McuSSD1306_CONFIG_ORIENTATION_LANDSCAPE 2
|
|
#define McuSSD1306_CONFIG_ORIENTATION_LANDSCAPE180 3
|
|
|
|
#ifndef McuSSD1306_CONFIG_FIXED_DISPLAY_ORIENTATION
|
|
#define McuSSD1306_CONFIG_FIXED_DISPLAY_ORIENTATION McuSSD1306_CONFIG_ORIENTATION_LANDSCAPE
|
|
/*!< Fixed display orientation setting, one of:
|
|
McuSSD1306_CONFIG_ORIENTATION_PORTRAIT
|
|
McuSSD1306_CONFIG_ORIENTATION_PORTRAIT180
|
|
McuSSD1306_CONFIG_ORIENTATION_LANDSCAPE
|
|
McuSSD1306_CONFIG_ORIENTATION_LANDSCAPE180
|
|
*/
|
|
#endif
|
|
|
|
#ifndef McuSSD1306_CONFIG_INITIALIZE_IN_INIT
|
|
#define McuSSD1306_CONFIG_INITIALIZE_IN_INIT (1)
|
|
/*!< 1: Initialize LCD during PE_low_level_init(); 0: Do not initialize during PE_low_level_init() */
|
|
#endif
|
|
|
|
#ifndef McuSSD1306_CONFIG_CLEAR_DISPLAY_IN_INIT
|
|
#define McuSSD1306_CONFIG_CLEAR_DISPLAY_IN_INIT (0)
|
|
/*!< 1: Clear display at the end of Init(); 0: Do not clear display at the end of Init() */
|
|
#endif
|
|
|
|
#ifndef McuSSD1306_CONFIG_INIT_DELAY_MS
|
|
#define McuSSD1306_CONFIG_INIT_DELAY_MS (100)
|
|
/*!< Additional delay (milliseconds) in Init(). Use zero for no delay. */
|
|
#endif
|
|
|
|
#ifndef McuSSD1306_CONFIG_USE_I2C_BLOCK_TRANSFER
|
|
#define McuSSD1306_CONFIG_USE_I2C_BLOCK_TRANSFER (1)
|
|
/*!< 1: use I2C Block transfer for better performance. 0: disabled, e.g. for slower displays */
|
|
#endif
|
|
|
|
#ifndef McuSSD1306_CONFIG_USE_RAM_BUFFER
|
|
#define McuSSD1306_CONFIG_USE_RAM_BUFFER (1)
|
|
/*!< 1: Use RAM Buffer for display memory; 0: Do not use RAM buffer (write directly to display) */
|
|
#endif
|
|
|
|
#endif /* __McuSSD1306_CONFIG_H */
|