Klagarge/SEm-Labos
Archived
1
0
Fork 0
Code Activity

add ahbGPIO

Browse Source
This commit is contained in:
Rémi Heredero
2024-04-19 16:11:36 +02:00
parent 1b569b2b42
commit 6ce04fe6d4
8 changed files with 4387 additions and 280 deletions
Download Patch File Download Diff File Expand all files Collapse all files

102
06-07-08-09-SystemOnChip/AhbLiteComponents/hdl/ahbGpio_studentVersion.vhd
View File

@ -17,18 +17,22 @@
-- Read registers
-- 00, data register provides the values detected on the lines.
--
signal addresses is unsigned(32 downto 0);
signal bRead is std_ulogic;
signal bWrite is std_ulogic;
ARCHITECTURE studentVersion OF ahbGpio IS
signal addresses: unsigned(hAddr'range);
signal bRead: std_ulogic;
signal bWrite: std_ulogic;
signal bDone: std_ulogic;
BEGIN
process(hReset_n, hClk) begin
if hReset_n = '1' then
if hReset_n = '0' then
-- AHB-Lite
--hRData <= (OTHERS => 'Z');
hRData <= (OTHERS => '0');
hReady <= '0';
hReady <= '1';
hResp <= '0';
-- Out
@ -37,16 +41,90 @@ BEGIN
addresses <= (OTHERS => '0');
bRead <= '0';
bWrite <= '1';
bWrite <= '0';
bDone <= '0';
elsif rising_edge(hClk) then
if hSel = '1' then
CASE hAddr is
WHEN 00 =>
WHEN 01 =>
WHEN OTHERS
end CASE;
bWrite <= hWrite;
bRead <= not hWrite;
addresses <= hAddr;
hReady <= '0';
bDone <= '0';
else
bWrite <= '0';
bRead <= '0';
end if;
if bRead = '1' and bWrite = '0' then
-------------------------------------------------------------------------
-- READ
-------------------------------------------------------------------------
if addresses = "00" then
-- ##### Read data register #####
--hRData <= unsigned(resize(ioIn, ioNb));
for i in 0 to ioNb-1 loop
hRData(i) <= ioIn(i);
end loop;
bDone <= '1';
elsif addresses = "01" then
report "@@@@@@@@@@ Not possible to change output in READ mode @@@@@@@@@@" severity error;
end if;
elsif bRead = '0' and bWrite = '1' then
-------------------------------------------------------------------------
-- WRITE
-------------------------------------------------------------------------
if addresses = "00" then
-- ##### Write data register #####
--ioOut <= resize(std_ulogic_vector(hWData), ioNb);
for i in 0 to ioNb-1 loop
ioOut(i) <= hWData(i);
end loop;
bDone <= '1';
elsif addresses = "01" then
-- ##### Write direction register #####
--ioEn <= hWData;
for i in 0 to ioNb-1 loop
ioEn(i) <= hWData(i);
end loop;
bDone <= '1';
end if;
elsif bRead = '1' and bWrite = '1' then
-------------------------------------------------------------------------
-- SHOULD NEVER HAPPEN
-------------------------------------------------------------------------
report "@@@@@@@@@@ READ and WRITE can't happened in same time @@@@@@@@@@" severity error;
end if;
if (ioIn and ioEn) = (ioEn and ioOut) then
hResp <= '0';
else
hResp <= '1';
end if;
if bDone = '1' then
--hRData <= (OTHERS => 'Z');
bDone <= '0';
hReady <= '1';
end if;
end if;
for i in (ioNb-1) downto 0 loop
if (ioEn(i) and ioIn(i)) /= (ioEn(i) and ioOut(i)) then
--ioEn(i) <= '0';
report "an output was in conflict" severity note;
end if;
end loop;
end process;
-- AHB-Lite