Archived
1
0

Initial commit

This commit is contained in:
github-classroom[bot]
2024-02-23 13:01:05 +00:00
committed by GitHub
commit d212040c30
1914 changed files with 1290006 additions and 0 deletions

View File

@ -0,0 +1,33 @@
--==============================================================================
--
-- AHB general purpose input/outputs
--
-- Provides "ioNb" input/output signals .
--
--------------------------------------------------------------------------------
--
-- Write registers
--
-- 00, data register receives the values to drive the output lines.
-- 01, output enable register defines the signal direction:
-- when '1', the direction is "out".
--
--------------------------------------------------------------------------------
--
-- Read registers
-- 00, data register provides the values detected on the lines.
--
ARCHITECTURE studentVersion OF ahbGpio IS
BEGIN
-- AHB-Lite
hRData <= (OTHERS => '0');
hReady <= '0';
hResp <= '0';
-- Out
ioOut <= (OTHERS => '0');
ioEn <= (OTHERS => '0');
END ARCHITECTURE studentVersion;

View File

@ -0,0 +1,36 @@
--==============================================================================
--
-- AHB UART
--
-- Implements a serial port.
--
--------------------------------------------------------------------------------
--
-- Write registers
--
-- 00, data register receives the word to be sent to the serial port.
-- 01, control register is used to control the peripheral.
-- 02, scaler register is used to set the baud rate.
--
--------------------------------------------------------------------------------
--
-- Read registers
-- 00, data register provides the last word received by the serial port.
-- 01, status register is used to get the peripheral's state.
-- bit 0: data ready for read
-- bit 1: sending in progress
-- bit 2: receiving in progress
--
ARCHITECTURE studentVersion OF ahbUart IS
BEGIN
-- AHB-Lite
hRData <= (OTHERS => '0');
hReady <= '0';
hResp <= '0';
-- Serial
TxD <= '0';
END ARCHITECTURE studentVersion;