Klagarge/SEm-Labos
Archived
1
0
Fork 0
Code Activity

Initial commit

Browse Source
This commit is contained in:
github-classroom[bot]
2024-02-23 13:01:05 +00:00
committed by GitHub
commit d212040c30
1914 changed files with 1290006 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

35
Libs/RiscV/NEORV32/rtl/processor_templates/README.md Normal file
View File

@ -0,0 +1,35 @@
# SoC/Processor Templates
This folder provides exemplary templates that wrap the processor top entity and provide a simplified
set of configuration generics and IOs. These setups are intended to allow beginner an easy start by
hiding much of the processor's configuration complexity. Furthermore, these setups are used by many
of the provided [example setups](https://github.com/stnolting/neorv32/tree/master/setups).
Alternatively, you can directly instantiate the processor's top entity
[`rtl/core/neorv32_top.vhd`](https://github.com/stnolting/neorv32/blob/master/rtl/core/neorv32_top.vhd)
to have full access to _all_ features.
### [`neorv32_ProcessorTop_Minimal.vhd`](https://github.com/stnolting/neorv32/blob/master/rtl/processor_templates/neorv32_ProcessorTop_Minimal.vhd)
This setup used the ["Direct Boot Configuration"](https://stnolting.github.io/neorv32/#_boot_configuration).
Application software is installed directly into the processor-internal instruction memory (IMEM) during
synthesis. This memory is implemented as ROM and these is no bootloader available. Hence, the executable
remains unchangeable is executed right after reset.
The setup only provides 3 PWM channels as IO.
### [`neorv32_ProcessorTop_MinimalBoot.vhd`](https://github.com/stnolting/neorv32/blob/master/rtl/processor_templates/neorv32_ProcessorTop_MinimalBoot.vhd)
This setup used the ["Indirect Boot Configuration"](https://stnolting.github.io/neorv32/#_boot_configuration).
The NEORV32 bootloader is enabled in this setup allowing to upload new application software at any time
via a UART connection.
The setup provides 8 GPIO outputs and the UART communication lines as IO.
### [`neorv32_ProcessorTop_UP5KDemo.vhd`](https://github.com/stnolting/neorv32/blob/master/rtl/processor_templates/neorv32_ProcessorTop_UP5KDemo.vhd)
This is a more complex template that implements a small microcontroller-like NEORV32.
It was originally designed for _UPDuino V3_ board, which features a Lattice iCE40up5k FPGA, but has
also been ported to other boards that provide the same FPGA.
This setup provides a rich set of IOs including GPIO, SPI, TWI and PWM.

246
Libs/RiscV/NEORV32/rtl/processor_templates/neorv32_ProcessorTop_Minimal.vhd Normal file
View File

@ -0,0 +1,246 @@
-- #################################################################################################
-- # << NEORV32 - Minimal setup without a bootloader >> #
-- # ********************************************************************************************* #
-- # BSD 3-Clause License #
-- # #
-- # Copyright (c) 2021, Stephan Nolting. All rights reserved. #
-- # #
-- # Redistribution and use in source and binary forms, with or without modification, are #
-- # permitted provided that the following conditions are met: #
-- # #
-- # 1. Redistributions of source code must retain the above copyright notice, this list of #
-- # conditions and the following disclaimer. #
-- # #
-- # 2. Redistributions in binary form must reproduce the above copyright notice, this list of #
-- # conditions and the following disclaimer in the documentation and/or other materials #
-- # provided with the distribution. #
-- # #
-- # 3. Neither the name of the copyright holder nor the names of its contributors may be used to #
-- # endorse or promote products derived from this software without specific prior written #
-- # permission. #
-- # #
-- # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS #
-- # OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF #
-- # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE #
-- # COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, #
-- # EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE #
-- # GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED #
-- # AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING #
-- # NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED #
-- # OF THE POSSIBILITY OF SUCH DAMAGE. #
-- # ********************************************************************************************* #
-- # The NEORV32 Processor - https://github.com/stnolting/neorv32 (c) Stephan Nolting #
-- #################################################################################################
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
library neorv32;
entity neorv32_ProcessorTop_Minimal is
generic (
CLOCK_FREQUENCY : natural := 0; -- clock frequency of clk_i in Hz
HW_THREAD_ID : natural := 0; -- hardware thread id (32-bit)
-- RISC-V CPU Extensions --
CPU_EXTENSION_RISCV_A : boolean := false; -- implement atomic extension?
CPU_EXTENSION_RISCV_C : boolean := false; -- implement compressed extension?
CPU_EXTENSION_RISCV_E : boolean := false; -- implement embedded RF extension?
CPU_EXTENSION_RISCV_M : boolean := false; -- implement mul/div extension?
CPU_EXTENSION_RISCV_U : boolean := false; -- implement user mode extension?
CPU_EXTENSION_RISCV_Zfinx : boolean := false; -- implement 32-bit floating-point extension (using INT regs!)
CPU_EXTENSION_RISCV_Zicsr : boolean := true; -- implement CSR system?
CPU_EXTENSION_RISCV_Zifencei : boolean := false; -- implement instruction stream sync.?
-- Extension Options --
FAST_MUL_EN : boolean := false; -- use DSPs for M extension's multiplier
FAST_SHIFT_EN : boolean := false; -- use barrel shifter for shift operations
CPU_CNT_WIDTH : natural := 34; -- total width of CPU cycle and instret counters (0..64)
-- Physical Memory Protection (PMP) --
PMP_NUM_REGIONS : natural := 0; -- number of regions (0..64)
PMP_MIN_GRANULARITY : natural := 8*1024; -- minimal region granularity in bytes, has to be a power of 2, min 8 bytes
-- Hardware Performance Monitors (HPM) --
HPM_NUM_CNTS : natural := 0; -- number of implemented HPM counters (0..29)
HPM_CNT_WIDTH : natural := 40; -- total size of HPM counters (0..64)
-- Internal Instruction memory --
MEM_INT_IMEM_EN : boolean := true; -- implement processor-internal instruction memory
MEM_INT_IMEM_SIZE : natural := 8*1024; -- size of processor-internal instruction memory in bytes
-- Internal Data memory --
MEM_INT_DMEM_EN : boolean := true; -- implement processor-internal data memory
MEM_INT_DMEM_SIZE : natural := 64*1024; -- size of processor-internal data memory in bytes
-- Internal Cache memory --
ICACHE_EN : boolean := false; -- implement instruction cache
ICACHE_NUM_BLOCKS : natural := 4; -- i-cache: number of blocks (min 1), has to be a power of 2
ICACHE_BLOCK_SIZE : natural := 64; -- i-cache: block size in bytes (min 4), has to be a power of 2
ICACHE_ASSOCIATIVITY : natural := 1; -- i-cache: associativity / number of sets (1=direct_mapped), has to be a power of 2
-- Processor peripherals --
IO_MTIME_EN : boolean := false; -- implement machine system timer (MTIME)?
IO_PWM_NUM_CH : natural := 3; -- number of PWM channels to implement (0..60); 0 = disabled
IO_WDT_EN : boolean := false -- implement watch dog timer (WDT)?
);
port (
clk_i : in std_logic;
rstn_i : in std_logic;
-- PWM (available if IO_PWM_NUM_CH > 0) --
pwm_o : out std_ulogic_vector(IO_PWM_NUM_CH-1 downto 0)
);
end entity;
architecture neorv32_ProcessorTop_Minimal_rtl of neorv32_ProcessorTop_Minimal is
begin
-- The core of the problem ----------------------------------------------------------------
-- -------------------------------------------------------------------------------------------
neorv32_inst: entity neorv32.neorv32_top
generic map (
-- General --
CLOCK_FREQUENCY => CLOCK_FREQUENCY, -- clock frequency of clk_i in Hz
INT_BOOTLOADER_EN => false, -- boot configuration: true = boot explicit bootloader; false = boot from int/ext (I)MEM
HW_THREAD_ID => HW_THREAD_ID, -- hardware thread id (32-bit)
-- On-Chip Debugger (OCD) --
ON_CHIP_DEBUGGER_EN => false, -- implement on-chip debugger?
-- RISC-V CPU Extensions --
CPU_EXTENSION_RISCV_A => CPU_EXTENSION_RISCV_A, -- implement atomic extension?
CPU_EXTENSION_RISCV_C => CPU_EXTENSION_RISCV_C, -- implement compressed extension?
CPU_EXTENSION_RISCV_E => CPU_EXTENSION_RISCV_E, -- implement embedded RF extension?
CPU_EXTENSION_RISCV_M => CPU_EXTENSION_RISCV_M, -- implement mul/div extension?
CPU_EXTENSION_RISCV_U => CPU_EXTENSION_RISCV_U, -- implement user mode extension?
CPU_EXTENSION_RISCV_Zfinx => CPU_EXTENSION_RISCV_Zfinx, -- implement 32-bit floating-point extension (using INT regs!)
CPU_EXTENSION_RISCV_Zicsr => CPU_EXTENSION_RISCV_Zicsr, -- implement CSR system?
CPU_EXTENSION_RISCV_Zicntr => true, -- implement base counters?
CPU_EXTENSION_RISCV_Zifencei => CPU_EXTENSION_RISCV_Zifencei, -- implement instruction stream sync.?
-- Extension Options --
FAST_MUL_EN => FAST_MUL_EN, -- use DSPs for M extension's multiplier
FAST_SHIFT_EN => FAST_SHIFT_EN, -- use barrel shifter for shift operations
CPU_CNT_WIDTH => CPU_CNT_WIDTH, -- total width of CPU cycle and instret counters (0..64)
-- Physical Memory Protection (PMP) --
PMP_NUM_REGIONS => PMP_NUM_REGIONS, -- number of regions (0..64)
PMP_MIN_GRANULARITY => PMP_MIN_GRANULARITY, -- minimal region granularity in bytes, has to be a power of 2, min 8 bytes
-- Hardware Performance Monitors (HPM) --
HPM_NUM_CNTS => HPM_NUM_CNTS, -- number of implemented HPM counters (0..29)
HPM_CNT_WIDTH => HPM_CNT_WIDTH, -- total size of HPM counters (1..64)
-- Internal Instruction memory --
MEM_INT_IMEM_EN => MEM_INT_IMEM_EN, -- implement processor-internal instruction memory
MEM_INT_IMEM_SIZE => MEM_INT_IMEM_SIZE, -- size of processor-internal instruction memory in bytes
-- Internal Data memory --
MEM_INT_DMEM_EN => MEM_INT_DMEM_EN, -- implement processor-internal data memory
MEM_INT_DMEM_SIZE => MEM_INT_DMEM_SIZE, -- size of processor-internal data memory in bytes
-- Internal Cache memory --
ICACHE_EN => ICACHE_EN, -- implement instruction cache
ICACHE_NUM_BLOCKS => ICACHE_NUM_BLOCKS, -- i-cache: number of blocks (min 1), has to be a power of 2
ICACHE_BLOCK_SIZE => ICACHE_BLOCK_SIZE, -- i-cache: block size in bytes (min 4), has to be a power of 2
ICACHE_ASSOCIATIVITY => ICACHE_ASSOCIATIVITY, -- i-cache: associativity / number of sets (1=direct_mapped), has to be a power of 2
-- External memory interface --
MEM_EXT_EN => false, -- implement external memory bus interface?
MEM_EXT_TIMEOUT => 0, -- cycles after a pending bus access auto-terminates (0 = disabled)
-- Processor peripherals --
IO_GPIO_EN => false, -- implement general purpose input/output port unit (GPIO)?
IO_MTIME_EN => IO_MTIME_EN, -- implement machine system timer (MTIME)?
IO_UART0_EN => false, -- implement primary universal asynchronous receiver/transmitter (UART0)?
IO_UART1_EN => false, -- implement secondary universal asynchronous receiver/transmitter (UART1)?
IO_SPI_EN => false, -- implement serial peripheral interface (SPI)?
IO_TWI_EN => false, -- implement two-wire interface (TWI)?
IO_PWM_NUM_CH => IO_PWM_NUM_CH, -- number of PWM channels to implement (0..60); 0 = disabled
IO_WDT_EN => IO_WDT_EN, -- implement watch dog timer (WDT)?
IO_TRNG_EN => false, -- implement true random number generator (TRNG)?
IO_CFS_EN => false, -- implement custom functions subsystem (CFS)?
IO_CFS_CONFIG => x"00000000", -- custom CFS configuration generic
IO_CFS_IN_SIZE => 32, -- size of CFS input conduit in bits
IO_CFS_OUT_SIZE => 32, -- size of CFS output conduit in bits
IO_NEOLED_EN => false -- implement NeoPixel-compatible smart LED interface (NEOLED)?
)
port map (
-- Global control --
clk_i => clk_i, -- global clock, rising edge
rstn_i => rstn_i, -- global reset, low-active, async
-- JTAG on-chip debugger interface (available if ON_CHIP_DEBUGGER_EN = true) --
jtag_trst_i => '0', -- low-active TAP reset (optional)
jtag_tck_i => '0', -- serial clock
jtag_tdi_i => '0', -- serial data input
jtag_tdo_o => open, -- serial data output
jtag_tms_i => '0', -- mode select
-- Wishbone bus interface (available if MEM_EXT_EN = true) --
wb_tag_o => open, -- request tag
wb_adr_o => open, -- address
wb_dat_i => (others => '0'), -- read data
wb_dat_o => open, -- write data
wb_we_o => open, -- read/write
wb_sel_o => open, -- byte enable
wb_stb_o => open, -- strobe
wb_cyc_o => open, -- valid cycle
wb_lock_o => open, -- exclusive access request
wb_ack_i => '0', -- transfer acknowledge
wb_err_i => '0', -- transfer error
-- Advanced memory control signals (available if MEM_EXT_EN = true) --
fence_o => open, -- indicates an executed FENCE operation
fencei_o => open, -- indicates an executed FENCEI operation
-- GPIO (available if IO_GPIO_EN = true) --
gpio_o => open, -- parallel output
gpio_i => (others => '0'), -- parallel input
-- primary UART0 (available if IO_UART0_EN = true) --
uart0_txd_o => open, -- UART0 send data
uart0_rxd_i => '0', -- UART0 receive data
uart0_rts_o => open, -- hw flow control: UART0.RX ready to receive ("RTR"), low-active, optional
uart0_cts_i => '0', -- hw flow control: UART0.TX allowed to transmit, low-active, optional
-- secondary UART1 (available if IO_UART1_EN = true) --
uart1_txd_o => open, -- UART1 send data
uart1_rxd_i => '0', -- UART1 receive data
uart1_rts_o => open, -- hw flow control: UART1.RX ready to receive ("RTR"), low-active, optional
uart1_cts_i => '0', -- hw flow control: UART1.TX allowed to transmit, low-active, optional
-- SPI (available if IO_SPI_EN = true) --
spi_sck_o => open, -- SPI serial clock
spi_sdo_o => open, -- controller data out, peripheral data in
spi_sdi_i => '0', -- controller data in, peripheral data out
spi_csn_o => open, -- SPI CS
-- TWI (available if IO_TWI_EN = true) --
twi_sda_io => open, -- twi serial data line
twi_scl_io => open, -- twi serial clock line
-- PWM (available if IO_PWM_NUM_CH > 0) --
pwm_o => pwm_o, -- pwm channels
-- Custom Functions Subsystem IO --
cfs_in_i => (others => '0'), -- custom CFS inputs conduit
cfs_out_o => open, -- custom CFS outputs conduit
-- NeoPixel-compatible smart LED interface (available if IO_NEOLED_EN = true) --
neoled_o => open, -- async serial data line
-- System time --
mtime_i => (others => '0'), -- current system time from ext. MTIME (if IO_MTIME_EN = false)
mtime_o => open, -- current system time from int. MTIME (if IO_MTIME_EN = true)
-- Interrupts --
mtime_irq_i => '0', -- machine timer interrupt, available if IO_MTIME_EN = false
msw_irq_i => '0', -- machine software interrupt
mext_irq_i => '0' -- machine external interrupt
);
end architecture;

267
Libs/RiscV/NEORV32/rtl/processor_templates/neorv32_ProcessorTop_MinimalBoot.vhd Normal file
View File

@ -0,0 +1,267 @@
-- #################################################################################################
-- # << NEORV32 - Minimal setup with the bootloader enabled >> #
-- # ********************************************************************************************* #
-- # BSD 3-Clause License #
-- # #
-- # Copyright (c) 2021, Stephan Nolting. All rights reserved. #
-- # #
-- # Redistribution and use in source and binary forms, with or without modification, are #
-- # permitted provided that the following conditions are met: #
-- # #
-- # 1. Redistributions of source code must retain the above copyright notice, this list of #
-- # conditions and the following disclaimer. #
-- # #
-- # 2. Redistributions in binary form must reproduce the above copyright notice, this list of #
-- # conditions and the following disclaimer in the documentation and/or other materials #
-- # provided with the distribution. #
-- # #
-- # 3. Neither the name of the copyright holder nor the names of its contributors may be used to #
-- # endorse or promote products derived from this software without specific prior written #
-- # permission. #
-- # #
-- # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS #
-- # OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF #
-- # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE #
-- # COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, #
-- # EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE #
-- # GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED #
-- # AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING #
-- # NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED #
-- # OF THE POSSIBILITY OF SUCH DAMAGE. #
-- # ********************************************************************************************* #
-- # The NEORV32 Processor - https://github.com/stnolting/neorv32 (c) Stephan Nolting #
-- #################################################################################################
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
library neorv32;
entity neorv32_ProcessorTop_MinimalBoot is
generic (
CLOCK_FREQUENCY : natural := 0; -- clock frequency of clk_i in Hz
INT_BOOTLOADER_EN : boolean := true; -- boot configuration: true = boot explicit bootloader; false = boot from int/ext (I)MEM
HW_THREAD_ID : natural := 0; -- hardware thread id (32-bit)
-- RISC-V CPU Extensions --
CPU_EXTENSION_RISCV_A : boolean := true; -- implement atomic extension?
CPU_EXTENSION_RISCV_C : boolean := true; -- implement compressed extension?
CPU_EXTENSION_RISCV_E : boolean := false; -- implement embedded RF extension?
CPU_EXTENSION_RISCV_M : boolean := true; -- implement mul/div extension?
CPU_EXTENSION_RISCV_U : boolean := false; -- implement user mode extension?
CPU_EXTENSION_RISCV_Zfinx : boolean := false; -- implement 32-bit floating-point extension (using INT regs!)
CPU_EXTENSION_RISCV_Zicsr : boolean := true; -- implement CSR system?
CPU_EXTENSION_RISCV_Zifencei : boolean := false; -- implement instruction stream sync.?
-- Extension Options --
FAST_MUL_EN : boolean := false; -- use DSPs for M extension's multiplier
FAST_SHIFT_EN : boolean := false; -- use barrel shifter for shift operations
CPU_CNT_WIDTH : natural := 34; -- total width of CPU cycle and instret counters (0..64)
-- Physical Memory Protection (PMP) --
PMP_NUM_REGIONS : natural := 0; -- number of regions (0..64)
PMP_MIN_GRANULARITY : natural := 64*1024; -- minimal region granularity in bytes, has to be a power of 2, min 8 bytes
-- Hardware Performance Monitors (HPM) --
HPM_NUM_CNTS : natural := 0; -- number of implemented HPM counters (0..29)
HPM_CNT_WIDTH : natural := 40; -- total size of HPM counters (0..64)
-- Internal Instruction memory --
MEM_INT_IMEM_EN : boolean := true; -- implement processor-internal instruction memory
MEM_INT_IMEM_SIZE : natural := 64*1024; -- size of processor-internal instruction memory in bytes
-- Internal Data memory --
MEM_INT_DMEM_EN : boolean := true; -- implement processor-internal data memory
MEM_INT_DMEM_SIZE : natural := 64*1024; -- size of processor-internal data memory in bytes
-- Internal Cache memory --
ICACHE_EN : boolean := false; -- implement instruction cache
ICACHE_NUM_BLOCKS : natural := 4; -- i-cache: number of blocks (min 1), has to be a power of 2
ICACHE_BLOCK_SIZE : natural := 64; -- i-cache: block size in bytes (min 4), has to be a power of 2
ICACHE_ASSOCIATIVITY : natural := 1; -- i-cache: associativity / number of sets (1=direct_mapped), has to be a power of 2
-- Processor peripherals --
IO_GPIO_EN : boolean := true; -- implement general purpose input/output port unit (GPIO)?
IO_MTIME_EN : boolean := true; -- implement machine system timer (MTIME)?
IO_UART0_EN : boolean := true; -- implement primary universal asynchronous receiver/transmitter (UART0)?
IO_PWM_NUM_CH : natural := 3; -- number of PWM channels to implement (0..60); 0 = disabled
IO_WDT_EN : boolean := true -- implement watch dog timer (WDT)?
);
port (
clk_i : in std_logic;
rstn_i : in std_logic;
-- GPIO (available if IO_GPIO_EN = true) --
gpio_o : out std_ulogic_vector(3 downto 0);
-- primary UART0 (available if IO_UART0_EN = true) --
uart_txd_o : out std_ulogic; -- UART0 send data
uart_rxd_i : in std_ulogic := '0'; -- UART0 receive data
uart_rts_o : out std_ulogic; -- hw flow control: UART0.RX ready to receive ("RTR"), low-active, optional
uart_cts_i : in std_ulogic := '0'; -- hw flow control: UART0.TX allowed to transmit, low-active, optional
-- PWM (available if IO_PWM_NUM_CH > 0) --
pwm_o : out std_ulogic_vector(IO_PWM_NUM_CH-1 downto 0)
);
end entity;
architecture neorv32_ProcessorTop_MinimalBoot_rtl of neorv32_ProcessorTop_MinimalBoot is
-- internal IO connection --
signal con_gpio_o : std_ulogic_vector(63 downto 0);
begin
-- IO Connection --------------------------------------------------------------------------
-- -------------------------------------------------------------------------------------------
-- GPIO --
gpio_o <= con_gpio_o(3 downto 0);
-- The core of the problem ----------------------------------------------------------------
-- -------------------------------------------------------------------------------------------
neorv32_inst: entity neorv32.neorv32_top
generic map (
-- General --
CLOCK_FREQUENCY => CLOCK_FREQUENCY, -- clock frequency of clk_i in Hz
INT_BOOTLOADER_EN => INT_BOOTLOADER_EN,-- boot configuration: true = boot explicit bootloader; false = boot from int/ext (I)MEM
HW_THREAD_ID => HW_THREAD_ID, -- hardware thread id (32-bit)
-- On-Chip Debugger (OCD) --
ON_CHIP_DEBUGGER_EN => false, -- implement on-chip debugger?
-- RISC-V CPU Extensions --
CPU_EXTENSION_RISCV_A => CPU_EXTENSION_RISCV_A, -- implement atomic extension?
CPU_EXTENSION_RISCV_C => CPU_EXTENSION_RISCV_C, -- implement compressed extension?
CPU_EXTENSION_RISCV_E => CPU_EXTENSION_RISCV_E, -- implement embedded RF extension?
CPU_EXTENSION_RISCV_M => CPU_EXTENSION_RISCV_M, -- implement mul/div extension?
CPU_EXTENSION_RISCV_U => CPU_EXTENSION_RISCV_U, -- implement user mode extension?
CPU_EXTENSION_RISCV_Zfinx => CPU_EXTENSION_RISCV_Zfinx, -- implement 32-bit floating-point extension (using INT regs!)
CPU_EXTENSION_RISCV_Zicsr => CPU_EXTENSION_RISCV_Zicsr, -- implement CSR system?
CPU_EXTENSION_RISCV_Zicntr => true, -- implement base counters?
CPU_EXTENSION_RISCV_Zifencei => CPU_EXTENSION_RISCV_Zifencei, -- implement instruction stream sync.?
-- Extension Options --
FAST_MUL_EN => FAST_MUL_EN, -- use DSPs for M extension's multiplier
FAST_SHIFT_EN => FAST_SHIFT_EN, -- use barrel shifter for shift operations
CPU_CNT_WIDTH => CPU_CNT_WIDTH, -- total width of CPU cycle and instret counters (0..64)
-- Physical Memory Protection (PMP) --
PMP_NUM_REGIONS => PMP_NUM_REGIONS, -- number of regions (0..64)
PMP_MIN_GRANULARITY => PMP_MIN_GRANULARITY, -- minimal region granularity in bytes, has to be a power of 2, min 8 bytes
-- Hardware Performance Monitors (HPM) --
HPM_NUM_CNTS => HPM_NUM_CNTS, -- number of implemented HPM counters (0..29)
HPM_CNT_WIDTH => HPM_CNT_WIDTH, -- total size of HPM counters (1..64)
-- Internal Instruction memory --
MEM_INT_IMEM_EN => MEM_INT_IMEM_EN, -- implement processor-internal instruction memory
MEM_INT_IMEM_SIZE => MEM_INT_IMEM_SIZE, -- size of processor-internal instruction memory in bytes
-- Internal Data memory --
MEM_INT_DMEM_EN => MEM_INT_DMEM_EN, -- implement processor-internal data memory
MEM_INT_DMEM_SIZE => MEM_INT_DMEM_SIZE, -- size of processor-internal data memory in bytes
-- Internal Cache memory --
ICACHE_EN => ICACHE_EN, -- implement instruction cache
ICACHE_NUM_BLOCKS => ICACHE_NUM_BLOCKS, -- i-cache: number of blocks (min 1), has to be a power of 2
ICACHE_BLOCK_SIZE => ICACHE_BLOCK_SIZE, -- i-cache: block size in bytes (min 4), has to be a power of 2
ICACHE_ASSOCIATIVITY => ICACHE_ASSOCIATIVITY, -- i-cache: associativity / number of sets (1=direct_mapped), has to be a power of 2
-- External memory interface --
MEM_EXT_EN => false, -- implement external memory bus interface?
MEM_EXT_TIMEOUT => 0, -- cycles after a pending bus access auto-terminates (0 = disabled)
-- Processor peripherals --
IO_GPIO_EN => IO_GPIO_EN, -- implement general purpose input/output port unit (GPIO)?
IO_MTIME_EN => IO_MTIME_EN, -- implement machine system timer (MTIME)?
IO_UART0_EN => IO_UART0_EN, -- implement primary universal asynchronous receiver/transmitter (UART0)?
IO_UART1_EN => false, -- implement secondary universal asynchronous receiver/transmitter (UART1)?
IO_SPI_EN => false, -- implement serial peripheral interface (SPI)?
IO_TWI_EN => false, -- implement two-wire interface (TWI)?
IO_PWM_NUM_CH => IO_PWM_NUM_CH, -- number of PWM channels to implement (0..60); 0 = disabled
IO_WDT_EN => IO_WDT_EN, -- implement watch dog timer (WDT)?
IO_TRNG_EN => false, -- implement true random number generator (TRNG)?
IO_CFS_EN => false, -- implement custom functions subsystem (CFS)?
IO_CFS_CONFIG => x"00000000", -- custom CFS configuration generic
IO_CFS_IN_SIZE => 32, -- size of CFS input conduit in bits
IO_CFS_OUT_SIZE => 32, -- size of CFS output conduit in bits
IO_NEOLED_EN => false -- implement NeoPixel-compatible smart LED interface (NEOLED)?
)
port map (
-- Global control --
clk_i => clk_i, -- global clock, rising edge
rstn_i => rstn_i, -- global reset, low-active, async
-- JTAG on-chip debugger interface (available if ON_CHIP_DEBUGGER_EN = true) --
jtag_trst_i => '0', -- low-active TAP reset (optional)
jtag_tck_i => '0', -- serial clock
jtag_tdi_i => '0', -- serial data input
jtag_tdo_o => open, -- serial data output
jtag_tms_i => '0', -- mode select
-- Wishbone bus interface (available if MEM_EXT_EN = true) --
wb_tag_o => open, -- request tag
wb_adr_o => open, -- address
wb_dat_i => (others => '0'), -- read data
wb_dat_o => open, -- write data
wb_we_o => open, -- read/write
wb_sel_o => open, -- byte enable
wb_stb_o => open, -- strobe
wb_cyc_o => open, -- valid cycle
wb_lock_o => open, -- exclusive access request
wb_ack_i => '0', -- transfer acknowledge
wb_err_i => '0', -- transfer error
-- Advanced memory control signals (available if MEM_EXT_EN = true) --
fence_o => open, -- indicates an executed FENCE operation
fencei_o => open, -- indicates an executed FENCEI operation
-- GPIO (available if IO_GPIO_EN = true) --
gpio_o => con_gpio_o, -- parallel output
gpio_i => (others => '0'), -- parallel input
-- primary UART0 (available if IO_UART0_EN = true) --
uart0_txd_o => uart_txd_o, -- UART0 send data
uart0_rxd_i => uart_rxd_i, -- UART0 receive data
uart0_rts_o => uart_rts_o, -- hw flow control: UART0.RX ready to receive ("RTR"), low-active, optional
uart0_cts_i => uart_cts_i, -- hw flow control: UART0.TX allowed to transmit, low-active, optional
-- secondary UART1 (available if IO_UART1_EN = true) --
uart1_txd_o => open, -- UART1 send data
uart1_rxd_i => '0', -- UART1 receive data
uart1_rts_o => open, -- hw flow control: UART1.RX ready to receive ("RTR"), low-active, optional
uart1_cts_i => '0', -- hw flow control: UART1.TX allowed to transmit, low-active, optional
-- SPI (available if IO_SPI_EN = true) --
spi_sck_o => open, -- SPI serial clock
spi_sdo_o => open, -- controller data out, peripheral data in
spi_sdi_i => '0', -- controller data in, peripheral data out
spi_csn_o => open, -- SPI CS
-- TWI (available if IO_TWI_EN = true) --
twi_sda_io => open, -- twi serial data line
twi_scl_io => open, -- twi serial clock line
-- PWM (available if IO_PWM_NUM_CH > 0) --
pwm_o => pwm_o, -- pwm channels
-- Custom Functions Subsystem IO --
cfs_in_i => (others => '0'), -- custom CFS inputs conduit
cfs_out_o => open, -- custom CFS outputs conduit
-- NeoPixel-compatible smart LED interface (available if IO_NEOLED_EN = true) --
neoled_o => open, -- async serial data line
-- System time --
mtime_i => (others => '0'), -- current system time from ext. MTIME (if IO_MTIME_EN = false)
mtime_o => open, -- current system time from int. MTIME (if IO_MTIME_EN = true)
-- Interrupts --
mtime_irq_i => '0', -- machine timer interrupt, available if IO_MTIME_EN = false
msw_irq_i => '0', -- machine software interrupt
mext_irq_i => '0' -- machine external interrupt
);
end architecture;

307
Libs/RiscV/NEORV32/rtl/processor_templates/neorv32_ProcessorTop_UP5KDemo.vhd Normal file
View File

@ -0,0 +1,307 @@
-- #################################################################################################
-- # << NEORV32 - Example setup for boards with UP5K devices >> #
-- # ********************************************************************************************* #
-- # BSD 3-Clause License #
-- # #
-- # Copyright (c) 2021, Stephan Nolting. All rights reserved. #
-- # #
-- # Redistribution and use in source and binary forms, with or without modification, are #
-- # permitted provided that the following conditions are met: #
-- # #
-- # 1. Redistributions of source code must retain the above copyright notice, this list of #
-- # conditions and the following disclaimer. #
-- # #
-- # 2. Redistributions in binary form must reproduce the above copyright notice, this list of #
-- # conditions and the following disclaimer in the documentation and/or other materials #
-- # provided with the distribution. #
-- # #
-- # 3. Neither the name of the copyright holder nor the names of its contributors may be used to #
-- # endorse or promote products derived from this software without specific prior written #
-- # permission. #
-- # #
-- # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS #
-- # OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF #
-- # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE #
-- # COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, #
-- # EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE #
-- # GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED #
-- # AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING #
-- # NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED #
-- # OF THE POSSIBILITY OF SUCH DAMAGE. #
-- # ********************************************************************************************* #
-- # The NEORV32 Processor - https://github.com/stnolting/neorv32 (c) Stephan Nolting #
-- #################################################################################################
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
library neorv32;
entity neorv32_ProcessorTop_UP5KDemo is
generic (
CLOCK_FREQUENCY : natural := 0; -- clock frequency of clk_i in Hz
HW_THREAD_ID : natural := 0; -- hardware thread id (32-bit)
-- On-Chip Debugger (OCD) --
ON_CHIP_DEBUGGER_EN : boolean := false; -- implement on-chip debugger?
-- RISC-V CPU Extensions --
CPU_EXTENSION_RISCV_A : boolean := true; -- implement atomic extension?
CPU_EXTENSION_RISCV_C : boolean := true; -- implement compressed extension?
CPU_EXTENSION_RISCV_E : boolean := false; -- implement embedded RF extension?
CPU_EXTENSION_RISCV_M : boolean := true; -- implement mul/div extension?
CPU_EXTENSION_RISCV_U : boolean := false; -- implement user mode extension?
CPU_EXTENSION_RISCV_Zfinx : boolean := false; -- implement 32-bit floating-point extension (using INT regs!)
CPU_EXTENSION_RISCV_Zicsr : boolean := true; -- implement CSR system?
CPU_EXTENSION_RISCV_Zifencei : boolean := false; -- implement instruction stream sync.?
-- Extension Options --
FAST_MUL_EN : boolean := false; -- use DSPs for M extension's multiplier
FAST_SHIFT_EN : boolean := false; -- use barrel shifter for shift operations
CPU_CNT_WIDTH : natural := 34; -- total width of CPU cycle and instret counters (0..64)
-- Physical Memory Protection (PMP) --
PMP_NUM_REGIONS : natural := 0; -- number of regions (0..64)
PMP_MIN_GRANULARITY : natural := 64*1024; -- minimal region granularity in bytes, has to be a power of 2, min 8 bytes
-- Hardware Performance Monitors (HPM) --
HPM_NUM_CNTS : natural := 0; -- number of implemented HPM counters (0..29)
HPM_CNT_WIDTH : natural := 40; -- total size of HPM counters (0..64)
-- Internal Instruction memory --
MEM_INT_IMEM_EN : boolean := true; -- implement processor-internal instruction memory
MEM_INT_IMEM_SIZE : natural := 64*1024; -- size of processor-internal instruction memory in bytes
-- Internal Data memory --
MEM_INT_DMEM_EN : boolean := true; -- implement processor-internal data memory
MEM_INT_DMEM_SIZE : natural := 64*1024; -- size of processor-internal data memory in bytes
-- Internal Cache memory --
ICACHE_EN : boolean := false; -- implement instruction cache
ICACHE_NUM_BLOCKS : natural := 4; -- i-cache: number of blocks (min 1), has to be a power of 2
ICACHE_BLOCK_SIZE : natural := 64; -- i-cache: block size in bytes (min 4), has to be a power of 2
ICACHE_ASSOCIATIVITY : natural := 1; -- i-cache: associativity / number of sets (1=direct_mapped), has to be a power of 2
-- Processor peripherals --
IO_GPIO_EN : boolean := true; -- implement general purpose input/output port unit (GPIO)?
IO_MTIME_EN : boolean := true; -- implement machine system timer (MTIME)?
IO_UART0_EN : boolean := true; -- implement primary universal asynchronous receiver/transmitter (UART0)?
IO_SPI_EN : boolean := true; -- implement serial peripheral interface (SPI)?
IO_TWI_EN : boolean := true; -- implement two-wire interface (TWI)?
IO_PWM_NUM_CH : natural := 3; -- number of PWM channels to implement (0..60); 0 = disabled
IO_WDT_EN : boolean := true -- implement watch dog timer (WDT)?
);
port (
clk_i : in std_logic;
rstn_i : in std_logic;
-- GPIO (available if IO_GPIO_EN = true) --
gpio_i : in std_ulogic_vector(3 downto 0);
gpio_o : out std_ulogic_vector(3 downto 0);
-- primary UART0 (available if IO_UART0_EN = true) --
uart_txd_o : out std_ulogic; -- UART0 send data
uart_rxd_i : in std_ulogic := '0'; -- UART0 receive data
uart_rts_o : out std_ulogic; -- hw flow control: UART0.RX ready to receive ("RTR"), low-active, optional
uart_cts_i : in std_ulogic := '0'; -- hw flow control: UART0.TX allowed to transmit, low-active, optional
-- SPI to on-board flash --
flash_sck_o : out std_ulogic;
flash_sdo_o : out std_ulogic;
flash_sdi_i : in std_ulogic;
flash_csn_o : out std_ulogic; -- NEORV32.SPI_CS(0)
-- SPI (available if IO_SPI_EN = true) --
spi_sck_o : out std_ulogic;
spi_sdo_o : out std_ulogic;
spi_sdi_i : in std_ulogic;
spi_csn_o : out std_ulogic; -- NEORV32.SPI_CS(1)
-- TWI (available if IO_TWI_EN = true) --
twi_sda_io : inout std_logic;
twi_scl_io : inout std_logic;
-- PWM (available if IO_PWM_NUM_CH > 0) --
pwm_o : out std_ulogic_vector(IO_PWM_NUM_CH-1 downto 0)
);
end entity;
architecture neorv32_ProcessorTop_UP5KDemo_rtl of neorv32_ProcessorTop_UP5KDemo is
-- internal IO connection --
signal con_gpio_o : std_ulogic_vector(63 downto 0);
signal con_gpio_i : std_ulogic_vector(63 downto 0);
signal con_spi_sck : std_ulogic;
signal con_spi_sdi : std_ulogic;
signal con_spi_sdo : std_ulogic;
signal con_spi_csn : std_ulogic_vector(07 downto 0);
begin
-- IO Connection --------------------------------------------------------------------------
-- -------------------------------------------------------------------------------------------
-- SPI: on-board flash --
flash_sck_o <= con_spi_sck;
flash_sdo_o <= con_spi_sdo;
flash_csn_o <= con_spi_csn(0);
-- SPI: user port --
spi_sck_o <= con_spi_sck;
spi_sdo_o <= con_spi_sdo;
spi_csn_o <= con_spi_csn(1);
con_spi_sdi <= flash_sdi_i when (con_spi_csn(0) = '0') else spi_sdi_i;
-- GPIO --
gpio_o <= con_gpio_o(3 downto 0);
con_gpio_i(03 downto 0) <= gpio_i;
con_gpio_i(63 downto 4) <= (others => '0');
-- The core of the problem ----------------------------------------------------------------
-- -------------------------------------------------------------------------------------------
neorv32_inst: entity neorv32.neorv32_top
generic map (
-- General --
CLOCK_FREQUENCY => CLOCK_FREQUENCY, -- clock frequency of clk_i in Hz
INT_BOOTLOADER_EN => true, -- boot configuration: true = boot explicit bootloader; false = boot from int/ext (I)MEM
HW_THREAD_ID => HW_THREAD_ID, -- hardware thread id (32-bit)
-- On-Chip Debugger (OCD) --
ON_CHIP_DEBUGGER_EN => ON_CHIP_DEBUGGER_EN, -- implement on-chip debugger?
-- RISC-V CPU Extensions --
CPU_EXTENSION_RISCV_A => CPU_EXTENSION_RISCV_A, -- implement atomic extension?
CPU_EXTENSION_RISCV_C => CPU_EXTENSION_RISCV_C, -- implement compressed extension?
CPU_EXTENSION_RISCV_E => CPU_EXTENSION_RISCV_E, -- implement embedded RF extension?
CPU_EXTENSION_RISCV_M => CPU_EXTENSION_RISCV_M, -- implement mul/div extension?
CPU_EXTENSION_RISCV_U => CPU_EXTENSION_RISCV_U, -- implement user mode extension?
CPU_EXTENSION_RISCV_Zfinx => CPU_EXTENSION_RISCV_Zfinx, -- implement 32-bit floating-point extension (using INT regs!)
CPU_EXTENSION_RISCV_Zicsr => CPU_EXTENSION_RISCV_Zicsr, -- implement CSR system?
CPU_EXTENSION_RISCV_Zicntr => true, -- implement base counters?
CPU_EXTENSION_RISCV_Zifencei => CPU_EXTENSION_RISCV_Zifencei, -- implement instruction stream sync.?
-- Extension Options --
FAST_MUL_EN => FAST_MUL_EN, -- use DSPs for M extension's multiplier
FAST_SHIFT_EN => FAST_SHIFT_EN, -- use barrel shifter for shift operations
CPU_CNT_WIDTH => CPU_CNT_WIDTH, -- total width of CPU cycle and instret counters (0..64)
-- Physical Memory Protection (PMP) --
PMP_NUM_REGIONS => PMP_NUM_REGIONS, -- number of regions (0..64)
PMP_MIN_GRANULARITY => PMP_MIN_GRANULARITY, -- minimal region granularity in bytes, has to be a power of 2, min 8 bytes
-- Hardware Performance Monitors (HPM) --
HPM_NUM_CNTS => HPM_NUM_CNTS, -- number of implemented HPM counters (0..29)
HPM_CNT_WIDTH => HPM_CNT_WIDTH, -- total size of HPM counters (1..64)
-- Internal Instruction memory --
MEM_INT_IMEM_EN => MEM_INT_IMEM_EN, -- implement processor-internal instruction memory
MEM_INT_IMEM_SIZE => MEM_INT_IMEM_SIZE, -- size of processor-internal instruction memory in bytes
-- Internal Data memory --
MEM_INT_DMEM_EN => MEM_INT_DMEM_EN, -- implement processor-internal data memory
MEM_INT_DMEM_SIZE => MEM_INT_DMEM_SIZE, -- size of processor-internal data memory in bytes
-- Internal Cache memory --
ICACHE_EN => ICACHE_EN, -- implement instruction cache
ICACHE_NUM_BLOCKS => ICACHE_NUM_BLOCKS, -- i-cache: number of blocks (min 1), has to be a power of 2
ICACHE_BLOCK_SIZE => ICACHE_BLOCK_SIZE, -- i-cache: block size in bytes (min 4), has to be a power of 2
ICACHE_ASSOCIATIVITY => ICACHE_ASSOCIATIVITY, -- i-cache: associativity / number of sets (1=direct_mapped), has to be a power of 2
-- External memory interface --
MEM_EXT_EN => false, -- implement external memory bus interface?
MEM_EXT_TIMEOUT => 0, -- cycles after a pending bus access auto-terminates (0 = disabled)
-- Processor peripherals --
IO_GPIO_EN => IO_GPIO_EN, -- implement general purpose input/output port unit (GPIO)?
IO_MTIME_EN => IO_MTIME_EN, -- implement machine system timer (MTIME)?
IO_UART0_EN => IO_UART0_EN, -- implement primary universal asynchronous receiver/transmitter (UART0)?
IO_UART1_EN => false, -- implement secondary universal asynchronous receiver/transmitter (UART1)?
IO_SPI_EN => IO_SPI_EN, -- implement serial peripheral interface (SPI)?
IO_TWI_EN => IO_TWI_EN, -- implement two-wire interface (TWI)?
IO_PWM_NUM_CH => IO_PWM_NUM_CH, -- number of PWM channels to implement (0..60); 0 = disabled
IO_WDT_EN => IO_WDT_EN, -- implement watch dog timer (WDT)?
IO_TRNG_EN => false, -- implement true random number generator (TRNG)?
IO_CFS_EN => false, -- implement custom functions subsystem (CFS)?
IO_CFS_CONFIG => x"00000000", -- custom CFS configuration generic
IO_CFS_IN_SIZE => 32, -- size of CFS input conduit in bits
IO_CFS_OUT_SIZE => 32, -- size of CFS output conduit in bits
IO_NEOLED_EN => false -- implement NeoPixel-compatible smart LED interface (NEOLED)?
)
port map (
-- Global control --
clk_i => clk_i, -- global clock, rising edge
rstn_i => rstn_i, -- global reset, low-active, async
-- JTAG on-chip debugger interface (available if ON_CHIP_DEBUGGER_EN = true) --
jtag_trst_i => '0', -- low-active TAP reset (optional)
jtag_tck_i => '0', -- serial clock
jtag_tdi_i => '0', -- serial data input
jtag_tdo_o => open, -- serial data output
jtag_tms_i => '0', -- mode select
-- Wishbone bus interface (available if MEM_EXT_EN = true) --
wb_tag_o => open, -- request tag
wb_adr_o => open, -- address
wb_dat_i => (others => '0'), -- read data
wb_dat_o => open, -- write data
wb_we_o => open, -- read/write
wb_sel_o => open, -- byte enable
wb_stb_o => open, -- strobe
wb_cyc_o => open, -- valid cycle
wb_lock_o => open, -- exclusive access request
wb_ack_i => '0', -- transfer acknowledge
wb_err_i => '0', -- transfer error
-- Advanced memory control signals (available if MEM_EXT_EN = true) --
fence_o => open, -- indicates an executed FENCE operation
fencei_o => open, -- indicates an executed FENCEI operation
-- GPIO (available if IO_GPIO_EN = true) --
gpio_o => con_gpio_o, -- parallel output
gpio_i => con_gpio_i, -- parallel input
-- primary UART0 (available if IO_UART0_EN = true) --
uart0_txd_o => uart_txd_o, -- UART0 send data
uart0_rxd_i => uart_rxd_i, -- UART0 receive data
uart0_rts_o => uart_rts_o, -- hw flow control: UART0.RX ready to receive ("RTR"), low-active, optional
uart0_cts_i => uart_cts_i, -- hw flow control: UART0.TX allowed to transmit, low-active, optional
-- secondary UART1 (available if IO_UART1_EN = true) --
uart1_txd_o => open, -- UART1 send data
uart1_rxd_i => '0', -- UART1 receive data
uart1_rts_o => open, -- hw flow control: UART1.RX ready to receive ("RTR"), low-active, optional
uart1_cts_i => '0', -- hw flow control: UART1.TX allowed to transmit, low-active, optional
-- SPI (available if IO_SPI_EN = true) --
spi_sck_o => con_spi_sck, -- SPI serial clock
spi_sdo_o => con_spi_sdo, -- controller data out, peripheral data in
spi_sdi_i => con_spi_sdi, -- controller data in, peripheral data out
spi_csn_o => con_spi_csn, -- SPI CS
-- TWI (available if IO_TWI_EN = true) --
twi_sda_io => twi_sda_io, -- twi serial data line
twi_scl_io => twi_scl_io, -- twi serial clock line
-- PWM (available if IO_PWM_NUM_CH > 0) --
pwm_o => pwm_o, -- pwm channels
-- Custom Functions Subsystem IO --
cfs_in_i => (others => '0'), -- custom CFS inputs conduit
cfs_out_o => open, -- custom CFS outputs conduit
-- NeoPixel-compatible smart LED interface (available if IO_NEOLED_EN = true) --
neoled_o => open, -- async serial data line
-- System time --
mtime_i => (others => '0'), -- current system time from ext. MTIME (if IO_MTIME_EN = false)
mtime_o => open, -- current system time from int. MTIME (if IO_MTIME_EN = true)
-- Interrupts --
mtime_irq_i => '0', -- machine timer interrupt, available if IO_MTIME_EN = false
msw_irq_i => '0', -- machine software interrupt
mext_irq_i => '0' -- machine external interrupt
);
end architecture;