Klagarge/Solar-Panel
Archived
1
0
Fork 0
Code Issues Pull Requests Activity

Initial commit

Browse Source
This commit is contained in:
Rémi Heredero
2023-02-24 14:34:16 +01:00
commit 157655cbfe
91 changed files with 133641 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

76
solar_panel.X/mcc_generated_files/device_config.c Normal file
View File

@ -0,0 +1,76 @@
/**
@Generated PIC10 / PIC12 / PIC16 / PIC18 MCUs Source File
@Company:
Microchip Technology Inc.
@File Name:
mcc.c
@Summary:
This is the device_config.c file generated using PIC10 / PIC12 / PIC16 / PIC18 MCUs
@Description:
This header file provides implementations for driver APIs for all modules selected in the GUI.
Generation Information :
Product Revision : PIC10 / PIC12 / PIC16 / PIC18 MCUs - 1.81.8
Device : PIC18F97J60
Driver Version : 2.00
The generated drivers are tested against the following:
Compiler : XC8 2.36 and above or later
MPLAB : MPLAB X 6.00
*/
/*
(c) 2018 Microchip Technology Inc. and its subsidiaries.
Subject to your compliance with these terms, you may use Microchip software and any
derivatives exclusively with Microchip products. It is your responsibility to comply with third party
license terms applicable to your use of third party software (including open source software) that
may accompany Microchip software.
THIS SOFTWARE IS SUPPLIED BY MICROCHIP "AS IS". NO WARRANTIES, WHETHER
EXPRESS, IMPLIED OR STATUTORY, APPLY TO THIS SOFTWARE, INCLUDING ANY
IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, AND FITNESS
FOR A PARTICULAR PURPOSE.
IN NO EVENT WILL MICROCHIP BE LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE,
INCIDENTAL OR CONSEQUENTIAL LOSS, DAMAGE, COST OR EXPENSE OF ANY KIND
WHATSOEVER RELATED TO THE SOFTWARE, HOWEVER CAUSED, EVEN IF MICROCHIP
HAS BEEN ADVISED OF THE POSSIBILITY OR THE DAMAGES ARE FORESEEABLE. TO
THE FULLEST EXTENT ALLOWED BY LAW, MICROCHIP'S TOTAL LIABILITY ON ALL
CLAIMS IN ANY WAY RELATED TO THIS SOFTWARE WILL NOT EXCEED THE AMOUNT
OF FEES, IF ANY, THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THIS
SOFTWARE.
*/
// Configuration bits: selected in the GUI
// CONFIG1L
#pragma config WDT = OFF // Watchdog Timer Enable bit->WDT disabled (control is placed on SWDTEN bit)
#pragma config STVR = ON // Stack Overflow/Underflow Reset Enable bit->Reset on stack overflow/underflow enabled
#pragma config XINST = OFF // Extended Instruction Set Enable bit->Instruction set extension and Indexed Addressing mode disabled (Legacy mode)
#pragma config DEBUG = OFF // Background Debugger Enable bit->Background debugger disabled; RB6 and RB7 configured as general purpose I/O pins
// CONFIG1H
#pragma config CP0 = OFF // Code Protection bit->Program memory is not code-protected
// CONFIG2L
#pragma config FOSC = HS // Oscillator Selection bits->HS oscillator
#pragma config FOSC2 = ON // Default/Reset System Clock Select bit->Clock selected by FOSC1:FOSC0 as system clock is enabled when OSCCON<1:0> = 00
#pragma config FCMEN = ON // Fail-Safe Clock Monitor Enable->Fail-Safe Clock Monitor enabled
#pragma config IESO = ON // Two-Speed Start-up (Internal/External Oscillator Switchover) Control bit->Two-Speed Start-up enabled
// CONFIG2H
#pragma config WDTPS = 32768 // Watchdog Timer Postscaler Select bits->1:32768
// CONFIG3L
#pragma config EASHFT = ON // External Address Bus Shift Enable bit->Address shifting enabled; address on external bus is offset to start at 000000h
#pragma config MODE = MM // External Memory Bus->Microcontroller mode, external bus disabled
#pragma config BW = 16 // Data Bus Width Select bit->16-Bit Data Width mode
#pragma config WAIT = OFF // External Bus Wait Enable bit->Wait states for operations on external memory bus disabled
// CONFIG3H
#pragma config CCP2MX = ON // ECCP2 MUX bit->ECCP2/P2A is multiplexed with RC1
#pragma config ECCPMX = ON // ECCP MUX bit->ECCP1 outputs (P1B/P1C) are multiplexed with RE6 and RE5; ECCP3 outputs (P3B/P3C) are multiplexed with RE4 and RE3
#pragma config ETHLED = ON // Ethernet LED Enable bit->RA0/RA1 are multiplexed with LEDA/LEDB when Ethernet module is enabled and function as I/O when Ethernet is disabled