migration

.gitignore

@@ -1,3 +1,6 @@
 solar_panel.X/build/
 solar_panel.X/debug/
-solar_panel.X/dist/
+solar_panel.X/dist/
+build/
+debug/
+dist/

nbproject/Makefile-default.mk

@@ -30,12 +30,12 @@ ifeq ($(TYPE_IMAGE), DEBUG_RUN)
 IMAGE_TYPE=debug
 OUTPUT_SUFFIX=elf
 DEBUGGABLE_SUFFIX=elf
-FINAL_IMAGE=${DISTDIR}/solar_panel.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
+FINAL_IMAGE=${DISTDIR}/solar_panel.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
 else
 IMAGE_TYPE=production
 OUTPUT_SUFFIX=hex
 DEBUGGABLE_SUFFIX=elf
-FINAL_IMAGE=${DISTDIR}/solar_panel.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
+FINAL_IMAGE=${DISTDIR}/solar_panel.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
 endif
 
 ifeq ($(COMPARE_BUILD), true)
@@ -88,7 +88,7 @@ FIXDEPS=fixDeps
 ifneq ($(INFORMATION_MESSAGE), )
 	@echo $(INFORMATION_MESSAGE)
 endif
-	${MAKE}  -f nbproject/Makefile-default.mk ${DISTDIR}/solar_panel.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
+	${MAKE}  -f nbproject/Makefile-default.mk ${DISTDIR}/solar_panel.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
 
 MP_PROCESSOR_OPTION=18F97J60
 # ------------------------------------------------------------------------------------
@@ -352,15 +352,15 @@ endif
 # ------------------------------------------------------------------------------------
 # Rules for buildStep: link
 ifeq ($(TYPE_IMAGE), DEBUG_RUN)
-${DISTDIR}/solar_panel.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}: ${OBJECTFILES}  nbproject/Makefile-${CND_CONF}.mk    
+${DISTDIR}/solar_panel.${IMAGE_TYPE}.${OUTPUT_SUFFIX}: ${OBJECTFILES}  nbproject/Makefile-${CND_CONF}.mk    
 	@${MKDIR} ${DISTDIR} 
-	${MP_CC} $(MP_EXTRA_LD_PRE) -mcpu=$(MP_PROCESSOR_OPTION) -Wl,-Map=${DISTDIR}/solar_panel.X.${IMAGE_TYPE}.map  -D__DEBUG=1  -mdebugger=snap  -DXPRJ_default=$(CND_CONF)  -Wl,--defsym=__MPLAB_BUILD=1   -mdfp="${DFP_DIR}/xc8"  -fno-short-double -fno-short-float -memi=wordwrite -O0 -fasmfile -maddrqual=ignore -xassembler-with-cpp -mwarn=-3 -Wa,-a -msummary=-psect,-class,+mem,-hex,-file  -ginhx32 -Wl,--data-init -mno-keep-startup -mno-download -mdefault-config-bits -std=c99 -gdwarf-3 -mstack=compiled:auto:auto:auto        $(COMPARISON_BUILD) -Wl,--memorysummary,${DISTDIR}/memoryfile.xml -o ${DISTDIR}/solar_panel.X.${IMAGE_TYPE}.${DEBUGGABLE_SUFFIX}  ${OBJECTFILES_QUOTED_IF_SPACED}     
-	@${RM} ${DISTDIR}/solar_panel.X.${IMAGE_TYPE}.hex 
+	${MP_CC} $(MP_EXTRA_LD_PRE) -mcpu=$(MP_PROCESSOR_OPTION) -Wl,-Map=${DISTDIR}/solar_panel.${IMAGE_TYPE}.map  -D__DEBUG=1  -mdebugger=snap  -DXPRJ_default=$(CND_CONF)  -Wl,--defsym=__MPLAB_BUILD=1   -mdfp="${DFP_DIR}/xc8"  -fno-short-double -fno-short-float -memi=wordwrite -O0 -fasmfile -maddrqual=ignore -xassembler-with-cpp -mwarn=-3 -Wa,-a -msummary=-psect,-class,+mem,-hex,-file  -ginhx32 -Wl,--data-init -mno-keep-startup -mno-download -mdefault-config-bits -std=c99 -gdwarf-3 -mstack=compiled:auto:auto:auto        $(COMPARISON_BUILD) -Wl,--memorysummary,${DISTDIR}/memoryfile.xml -o ${DISTDIR}/solar_panel.${IMAGE_TYPE}.${DEBUGGABLE_SUFFIX}  ${OBJECTFILES_QUOTED_IF_SPACED}     
+	@${RM} ${DISTDIR}/solar_panel.${IMAGE_TYPE}.hex 
 	
 else
-${DISTDIR}/solar_panel.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}: ${OBJECTFILES}  nbproject/Makefile-${CND_CONF}.mk   
+${DISTDIR}/solar_panel.${IMAGE_TYPE}.${OUTPUT_SUFFIX}: ${OBJECTFILES}  nbproject/Makefile-${CND_CONF}.mk   
 	@${MKDIR} ${DISTDIR} 
-	${MP_CC} $(MP_EXTRA_LD_PRE) -mcpu=$(MP_PROCESSOR_OPTION) -Wl,-Map=${DISTDIR}/solar_panel.X.${IMAGE_TYPE}.map  -DXPRJ_default=$(CND_CONF)  -Wl,--defsym=__MPLAB_BUILD=1   -mdfp="${DFP_DIR}/xc8"  -fno-short-double -fno-short-float -memi=wordwrite -O0 -fasmfile -maddrqual=ignore -xassembler-with-cpp -mwarn=-3 -Wa,-a -msummary=-psect,-class,+mem,-hex,-file  -ginhx32 -Wl,--data-init -mno-keep-startup -mno-download -mdefault-config-bits -std=c99 -gdwarf-3 -mstack=compiled:auto:auto:auto     $(COMPARISON_BUILD) -Wl,--memorysummary,${DISTDIR}/memoryfile.xml -o ${DISTDIR}/solar_panel.X.${IMAGE_TYPE}.${DEBUGGABLE_SUFFIX}  ${OBJECTFILES_QUOTED_IF_SPACED}     
+	${MP_CC} $(MP_EXTRA_LD_PRE) -mcpu=$(MP_PROCESSOR_OPTION) -Wl,-Map=${DISTDIR}/solar_panel.${IMAGE_TYPE}.map  -DXPRJ_default=$(CND_CONF)  -Wl,--defsym=__MPLAB_BUILD=1   -mdfp="${DFP_DIR}/xc8"  -fno-short-double -fno-short-float -memi=wordwrite -O0 -fasmfile -maddrqual=ignore -xassembler-with-cpp -mwarn=-3 -Wa,-a -msummary=-psect,-class,+mem,-hex,-file  -ginhx32 -Wl,--data-init -mno-keep-startup -mno-download -mdefault-config-bits -std=c99 -gdwarf-3 -mstack=compiled:auto:auto:auto     $(COMPARISON_BUILD) -Wl,--memorysummary,${DISTDIR}/memoryfile.xml -o ${DISTDIR}/solar_panel.${IMAGE_TYPE}.${DEBUGGABLE_SUFFIX}  ${OBJECTFILES_QUOTED_IF_SPACED}     
 	
 endif
 

nbproject/Makefile-genesis.properties

@@ -1,5 +1,5 @@
 #
-#Fri Mar 03 16:00:47 CET 2023
+#Thu Mar 09 15:57:40 CET 2023
 default.languagetoolchain.version=2.40
 default.Pack.dfplocation=C\:\\Program Files\\Microchip\\MPLABX\\v6.00\\packs\\Microchip\\PIC18F-J_DFP\\1.5.44
 conf.ids=default
@@ -10,5 +10,5 @@ default.com-microchip-mplab-mdbcore-snap-SnapToolImpl.md5=eaa336cefb7fc46db8b50b
 com-microchip-mplab-nbide-embedded-makeproject-MakeProject.md5=6e02ca5e9f5042ffd365b42ab82d3a9b
 user-defined-mime-resolver-xml=none
 default.com-microchip-mplab-nbide-toolchain-xc8-XC8LanguageToolchain.md5=ab1e0737b447a24f7366e9fd8fe5a2f0
-proj.dir=C\:\\Users\\remi\\Downloads\\MCU\\solar_panel\\solar_panel.X
+proj.dir=C\:\\Users\\remi\\MPLABXProjects\\solar_panel
 host.platform=windows

nbproject/Makefile-impl.mk

@@ -24,7 +24,7 @@ CLEAN_SUBPROJECTS=${CLEAN_SUBPROJECTS_${SUBPROJECTS}}
 
 
 # Project Name
-PROJECTNAME=solar_panel.X
+PROJECTNAME=solar_panel
 
 # Active Configuration
 DEFAULTCONF=default

nbproject/Makefile-variables.mk

@@ -0,0 +1,10 @@
+#
+# Generated - do not edit!
+#
+# NOCDDL
+#
+CND_BASEDIR=`pwd`
+# default configuration
+CND_ARTIFACT_DIR_default=dist/default/production
+CND_ARTIFACT_NAME_default=solar_panel.production.hex
+CND_ARTIFACT_PATH_default=dist/default/production/solar_panel.production.hex

solar_panel.X/main.c

@@ -1,120 +0,0 @@
-/**
-  Generated Main Source File
-
-  Company:
-    Microchip Technology Inc.
-
-  File Name:
-    main.c
-
-  Summary:
-    This is the main file generated using PIC10 / PIC12 / PIC16 / PIC18 MCUs
-
-  Description:
-    This header file provides implementations for driver APIs for all modules selected in the GUI.
-    Generation Information :
-        Product Revision  :  PIC10 / PIC12 / PIC16 / PIC18 MCUs - 1.81.8
-        Device            :  PIC18F97J60
-        Driver Version    :  2.00
-*/
-
-/*
-    (c) 2018 Microchip Technology Inc. and its subsidiaries. 
-    
-    Subject to your compliance with these terms, you may use Microchip software and any 
-    derivatives exclusively with Microchip products. It is your responsibility to comply with third party 
-    license terms applicable to your use of third party software (including open source software) that 
-    may accompany Microchip software.
-    
-    THIS SOFTWARE IS SUPPLIED BY MICROCHIP "AS IS". NO WARRANTIES, WHETHER 
-    EXPRESS, IMPLIED OR STATUTORY, APPLY TO THIS SOFTWARE, INCLUDING ANY 
-    IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, AND FITNESS 
-    FOR A PARTICULAR PURPOSE.
-    
-    IN NO EVENT WILL MICROCHIP BE LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE, 
-    INCIDENTAL OR CONSEQUENTIAL LOSS, DAMAGE, COST OR EXPENSE OF ANY KIND 
-    WHATSOEVER RELATED TO THE SOFTWARE, HOWEVER CAUSED, EVEN IF MICROCHIP 
-    HAS BEEN ADVISED OF THE POSSIBILITY OR THE DAMAGES ARE FORESEEABLE. TO 
-    THE FULLEST EXTENT ALLOWED BY LAW, MICROCHIP'S TOTAL LIABILITY ON ALL 
-    CLAIMS IN ANY WAY RELATED TO THIS SOFTWARE WILL NOT EXCEED THE AMOUNT 
-    OF FEES, IF ANY, THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THIS 
-    SOFTWARE.
-*/
-
-#include "mcc_generated_files/mcc.h"
-#include "lcd/lcd.h"
-#include "measure.h"
-#include "modbus.h"
-
-#define MAX_COL 16
-/*
-                         Main application
- */
-void resetTMR0(void);
-void endFrame(void);
-
-void main(void)
-{
-    // Initialize the device
-    SYSTEM_Initialize();
-    EPWM1_LoadDutyValue(0);
-    
-    Lcd_Init(); 
-    adc_init();
-    modbus_init(0x80);
-    uint16_t offsetCurrent = 0;
-    offsetCurrent = measure_current(offsetCurrent);
-
-    // If using interrupts in PIC18 High/Low Priority Mode you need to enable the Global High and Low Interrupts
-    // If using interrupts in PIC Mid-Range Compatibility Mode you need to enable the Global and Peripheral Interrupts
-    // Use the following macros to:
-
-    // Enable the Global Interrupts
-    INTERRUPT_GlobalInterruptEnable();
-
-    // Disable the Global Interrupts
-    //INTERRUPT_GlobalInterruptDisable();
-
-    // Enable the Peripheral Interrupts
-    INTERRUPT_PeripheralInterruptEnable();
-
-    // Disable the Peripheral Interrupts
-    //INTERRUPT_PeripheralInterruptDisable();
-    uint16_t foo = 512;
-    EUSART1_SetRxInterruptHandler(resetTMR0);
-    TMR0_SetInterruptHandler(endFrame);
-    while (1)
-    {
-        foo = ++foo%1023;
-        EPWM1_LoadDutyValue(foo);
-        uint16_t valueV = measure_voltage();
-        uint16_t valueI = measure_current(offsetCurrent);
-        
-        char msg[MAX_COL+1];
-        //LCD_2x16_WriteCmd(0x01);    // clear display
-        
-        sprintf(msg, "U = %04d [mV] ", valueV);
-        LCD_2x16_WriteMsg(msg,0);
-        
-        sprintf(msg, "I = %04d [uA] ", valueI);
-        LCD_2x16_WriteMsg(msg,1);
-        
-    }   
-}
-
-
-void resetTMR0(void){
-    INTCONbits.TMR0IF = 0;
-    TMR0_Reload();
-    TMR0_StartTimer();
-}
-
-void endFrame(void){
-    TMR0_StopTimer();
-    modbus_analyse_and_answer();
-    
-    // TODO
-}
-/**
- End of File
-*/

solar_panel.X/nbproject/Makefile-variables.mk

@@ -1,10 +0,0 @@
-#
-# Generated - do not edit!
-#
-# NOCDDL
-#
-CND_BASEDIR=`pwd`
-# default configuration
-CND_ARTIFACT_DIR_default=dist/default/production
-CND_ARTIFACT_NAME_default=solar_panel.X.production.hex
-CND_ARTIFACT_PATH_default=dist/default/production/solar_panel.X.production.hex