Merge branch 'dev' into comp/electrical

(no comment...)

doc/examples.typ

@@ -56,7 +56,7 @@ for i in range(3) {
 ```)
 
 #let wires = example(```
-for i in range(4) {
+for i in range(3) {
   draw.circle((i * 3, 0), radius: .1, name: "p" + str(i * 2))
   draw.circle((i * 3 + 2, 1), radius: .1, name: "p" + str(i * 2 + 1))
   draw.content((i * 3 + 1, -1), raw(wire.wire-styles.at(i)))
@@ -65,10 +65,6 @@ wire.wire("w1", ("p0", "p1"), style: "direct")
 wire.wire("w2", ("p2", "p3"), style: "zigzag")
 wire.wire("w3", ("p4", "p5"), style: "dodge",
           dodge-y: -0.5, dodge-margins: (0.5, 0.5))
-wire.wire("w4", ("p6","p7"), style: "guided",
-          guided-center:(20%, 40%), guided-margins: (90%,87%),
-          guided-sides: ("north","south"))
-
 ```, vertical: true)
 
 #let stub = example(```
@@ -119,46 +115,6 @@ gates.gate-xnor(x: 0, y: 0, w: 1.5, h: 1.5)
 gates.gate-xnor(x: 3, y: 0, w: 1.5, h: 1.5, inverted: "all")
 ```, vertical: true)
 
-#let iec-gate-and = example(```
-gates.iec-gate-and(x: 0, y: 0, w: 1.5, h: 1.5)
-gates.iec-gate-and(x: 3, y: 0, w: 1.5, h: 1.5, inverted: "all")
-```, vertical: true)
-
-#let iec-gate-nand = example(```
-gates.iec-gate-nand(x: 0, y: 0, w: 1.5, h: 1.5)
-gates.iec-gate-nand(x: 3, y: 0, w: 1.5, h: 1.5, inverted: "all")
-```, vertical: true)
-
-#let iec-gate-or = example(```
-gates.iec-gate-or(x: 0, y: 0, w: 1.5, h: 1.5)
-gates.iec-gate-or(x: 3, y: 0, w: 1.5, h: 1.5, inverted: "all")
-```, vertical: true)
-
-#let iec-gate-nor = example(```
-gates.iec-gate-nor(x: 0, y: 0, w: 1.5, h: 1.5)
-gates.iec-gate-nor(x: 3, y: 0, w: 1.5, h: 1.5, inverted: "all")
-```, vertical: true)
-
-#let iec-gate-xor = example(```
-gates.iec-gate-xor(x: 0, y: 0, w: 1.5, h: 1.5)
-gates.iec-gate-xor(x: 3, y: 0, w: 1.5, h: 1.5, inverted: "all")
-```, vertical: true)
-
-#let iec-gate-xnor = example(```
-gates.iec-gate-xnor(x: 0, y: 0, w: 1.5, h: 1.5)
-gates.iec-gate-xnor(x: 3, y: 0, w: 1.5, h: 1.5, inverted: "all")
-```, vertical: true)
-
-#let iec-gate-buf = example(```
-gates.iec-gate-buf(x: 0, y: 0, w: 1.5, h: 1.5)
-gates.iec-gate-buf(x: 3, y: 0, w: 1.5, h: 1.5, inverted: "all")
-```, vertical: true)
-
-#let iec-gate-not = example(```
-gates.iec-gate-not(x: 0, y: 0, w: 1.5, h: 1.5)
-gates.iec-gate-not(x: 3, y: 0, w: 1.5, h: 1.5, inverted: "all")
-```, vertical: true)
-
 #let group = example(```
 element.group(
   id: "g1", name: "Group 1", stroke: (dash: "dashed"),
@@ -192,3 +148,21 @@ wire.wire("w2", ((0, 0), (1, -.5)),
           style: "zigzag", zigzag-ratio: 80%)
 wire.intersection("w1.zig")
 ```)
+
+#let capacitor = example(```
+electrical.capacitor(
+  x: 0, y: 0, w: 2, h: 1, id: "a",
+  scales: (100%, 80%), gap: 0.3
+)
+
+electrical.capacitor(
+  x: 4, y: -0.5, w: 1, h: 2, id: "b",
+  vertical: true, symbols: ([+], none)
+)
+```, vertical: true)
+
+#let resistor = example(```
+electrical.resistor(x: 0, y: 0, w: 2, h: 0.5, id: "a", zigzags: 8)
+electrical.resistor(x: 4, y: -0.5, w: 0.5, h: 2, id: "b", vertical: true)
+electrical.resistor(x: 6.5, y: 0, w: 2, h: 0.5, id: "c", zigzags: none)
+```, vertical: true)

gallery/test3.typ

@@ -81,4 +81,57 @@
   element.gate-xnor(
     x: 9, y: -6, w: 2, h: 2, id: "xnor"
   )
+
+  element.resistor(
+    x: 0, y: -8, w: 2, h: 0.5, id: "res1"
+  )
+
+  element.capacitor(
+    x: 3, y: (from: "res1-port-1", to: "0"),
+    w: 2, h: 0.6,
+    id: "cap1",
+    scales: (100%, 80%),
+    symbols: ([+], [-])
+  )
+
+  element.resistor(
+    x: (rel: 1, to: "cap1-port-1"),
+    y: (from: "cap1-port-1", to: "0"),
+    w: 0.5, h: 2,
+    id: "res2",
+    vertical: true,
+    zigzags: 8
+  )
+
+  element.capacitor(
+    x: (rel: 1, to: "res2.east"),
+    y: (from: "res2-port-1", to: "1"),
+    w: 0.5, h: 2,
+    id: "cap2",
+    vertical: true,
+    symbols: ([a], [b])
+  )
+
+  element.resistor(
+    x: (rel: 1, to: "cap2-port-0"),
+    y: (from: "cap2-port-0", to: "0"),
+    w: 2, h: 0.5,
+    id: "res3",
+    zigzags: none
+  )
+
+  element.resistor(
+    x: (rel: 1, to: "res3-port-1"),
+    y: (from: "res3-port-1", to: "0"),
+    w: 0.5, h: 2,
+    id: "res4",
+    zigzags: none,
+    vertical: true
+  )
+
+  wire.wire("w4", ("res1-port-1", "cap1-port-0"))
+  wire.wire("w5", ("cap1-port-1", "res2-port-0"))
+  wire.wire("w6", ("res2-port-1", "cap2-port-1"))
+  wire.wire("w7", ("cap2-port-0", "res3-port-0"))
+  wire.wire("w8", ("res3-port-1", "res4-port-0"))
 })

gallery/test7.typ

@@ -1,98 +0,0 @@
-#import "@preview/cetz:0.3.2": draw
-#import "../src/lib.typ": circuit, element, util, wire
-
-#set page(width: auto, height: auto, margin: .5cm)
-
-#circuit({
-  element.iec-gate-buf(
-    x: 0,
-    y: 0,
-    w: 2,
-    h: 2,
-    id: "iec-buf",
-    inputs: 1,
-  )
-  wire.stub("iec-buf-port-in0", "west")
-
-  element.iec-gate-not(
-    x: 3,
-    y: 0,
-    w: 2,
-    h: 2,
-    id: "iec-not",
-    inputs: 1,
-  )
-  wire.stub("iec-not-port-in0", "west")
-
-  element.iec-gate-and(
-    id: "iec-and",
-    x: 0,
-    y: -3,
-    w: 2,
-    h: 2,
-    inputs: 2,
-  )
-  for i in range(2) {
-    wire.stub("iec-and-port-in" + str(i), "west")
-  }
-
-  element.iec-gate-nand(
-    id: "iec-nand",
-    x: 3,
-    y: -3,
-    w: 2,
-    h: 2,
-    inputs: 2,
-  )
-  for i in range(2) {
-    wire.stub("iec-nand-port-in" + str(i), "west")
-  }
-
-  element.iec-gate-or(
-    id: "iec-or",
-    x: 0,
-    y: -6,
-    w: 2,
-    h: 2,
-    inputs: 2,
-  )
-  for i in range(2) {
-    wire.stub("iec-or-port-in" + str(i), "west")
-  }
-
-  element.iec-gate-nor(
-    id: "iec-nor",
-    x: 3,
-    y: -6,
-    w: 2,
-    h: 2,
-    inputs: 2,
-  )
-  for i in range(2) {
-    wire.stub("iec-nor-port-in" + str(i), "west")
-  }
-
-  element.iec-gate-xor(
-    id: "iec-xor",
-    x: 0,
-    y: -9,
-    w: 2,
-    h: 2,
-    inputs: 2,
-  )
-  for i in range(2) {
-    wire.stub("iec-xor-port-in" + str(i), "west")
-  }
-
-  element.iec-gate-xnor(
-    id: "iec-nxor",
-    x: 3,
-    y: -9,
-    w: 2,
-    h: 2,
-    inputs: 2,
-  )
-  for i in range(2) {
-    wire.stub("iec-nxor-port-in" + str(i), "west")
-  }
-})

manual.typ

@@ -4,6 +4,7 @@
 #import "doc/examples.typ"
 #import "src/circuit.typ": circuit
 #import "src/element.typ"
+#import "src/electrical.typ"
 #import "src/gates.typ"
 #import "src/util.typ"
 #import "src/wire.typ"
@@ -195,12 +196,7 @@ If you have installed Circuiteria directly in your project, import #link("src/li
   read("src/elements/logic/and.typ") + "\n" +
   read("src/elements/logic/buf.typ") + "\n" +
   read("src/elements/logic/or.typ") + "\n" +
-  read("src/elements/logic/xor.typ") + "\n" +
-  read("src/elements/logic/iec_gate.typ") + "\n" +
-  read("src/elements/logic/iec_and.typ") + "\n" +
-  read("src/elements/logic/iec_buf.typ") + "\n" +
-  read("src/elements/logic/iec_or.typ") + "\n" +
-  read("src/elements/logic/iec_xor.typ"),
+  read("src/elements/logic/xor.typ"),
   name: "gates",
   old-syntax: true,
   scope: (
@@ -216,3 +212,23 @@ If you have installed Circuiteria directly in your project, import #link("src/li
 )
 
 #tidy.show-module(gates-docs, sort-functions: false)
+
+#pagebreak()
+
+#let electrical-docs = tidy.parse-module(
+  read("src/elements/electrical/capacitor.typ") + "\n" +
+  read("src/elements/electrical/resistor.typ") + "\n",
+  name: "electrical",
+  scope: (
+    element: element,
+    circuit: circuit,
+    electrical: electrical,
+    draw: draw,
+    wire: wire,
+    tidy: tidy,
+    examples: examples,
+    doc-ref: doc-ref
+  )
+)
+
+#tidy.show-module(electrical-docs, sort-functions: false)

src/circuit.typ

@@ -9,5 +9,6 @@
 /// - length (length, ratio): Optional base unit
 /// -> none
 #let circuit(body, length: 2em) = {
+  set text(font: "Source Sans 3")
   canvas(length: length, body)
 }

src/electrical.typ

@@ -0,0 +1,2 @@
+#import "elements/electrical/capacitor.typ": capacitor
+#import "elements/electrical/resistor.typ": resistor

src/element.typ

@@ -11,10 +11,8 @@
 #import "elements/logic/or.typ": gate-or, gate-nor
 #import "elements/logic/xor.typ": gate-xor, gate-xnor
 #import "elements/logic/buf.typ": gate-buf, gate-not
-#import "elements/logic/iec_gate.typ": iec-gate
-#import "elements/logic/iec_and.typ": iec-gate-and, iec-gate-nand
-#import "elements/logic/iec_buf.typ": iec-gate-buf, iec-gate-not
-#import "elements/logic/iec_or.typ": iec-gate-or, iec-gate-nor
-#import "elements/logic/iec_xor.typ": iec-gate-xor, iec-gate-xnor
+
+#import "elements/electrical/resistor.typ": resistor
+#import "elements/electrical/capacitor.typ": capacitor
 
 #import "elements/group.typ": group

src/elements/block.typ

@@ -1,9 +1,9 @@
 #import "@preview/cetz:0.3.2": draw
 #import "element.typ"
 
-#let draw-shape(id, tl, tr, br, bl, fill, stroke, radius: 0.5em) = {
+#let draw-shape(id, tl, tr, br, bl, fill, stroke) = {
   let f = draw.rect(
-    radius: radius,
+    radius: 0.5em,
     inset: 0.5em,
     fill: fill,
     stroke: stroke,
@@ -27,14 +27,13 @@
   ports: (),
   ports-margins: (),
   fill: none,
-  radius: 0.5em,
   stroke: black + 1pt,
   id: "",
   debug: (
     ports: false
   )
 ) = element.elmt(
-  draw-shape: draw-shape.with(radius: radius),
+  draw-shape: draw-shape,
   x: x,
   y: y,
   w: w,

src/elements/electrical/capacitor.typ

@@ -0,0 +1,138 @@
+#import "@preview/cetz:0.2.2": draw
+#import "../element.typ"
+#import "../ports.typ": add-port
+
+#let draw-shape(
+  id, tl, tr, br, bl,
+  fill, stroke,
+  vertical: false,
+  gap: 0.2,
+  scales: (100%, 100%),
+  symbols: (none, none)
+) = {
+  let (x0, y0) = tl
+  let (x1, y1) = br
+
+  let w = x1 - x0
+  let h = y1 - y0
+
+  let (o0, s0) = if vertical {(y0, h)} else {(x0, w)}
+  let (o1, s1) = if vertical {(x0, w)} else {(y0, h)}
+  let m1 = o1 + s1 / 2
+
+  let pt(i, j) = if vertical {
+    (j, i)
+  } else {
+    (i, j)
+  }
+
+  let size0 = s1 * scales.first() / 100%
+  let size1 = s1 * scales.last() / 100%
+
+  if type(gap) == ratio {
+    gap = gap / 100%
+  } else {
+    gap = gap / calc.abs(s0)
+  }
+  let r0 = 0.5 - gap / 2
+  let r1 = 0.5 + gap / 2
+
+  // Coordinates in (main axis, secondary axis) format
+  let p0 = pt(o0, m1)
+  let p1 = pt(o0 + r0 * s0, m1)
+  let p2 = pt(o0 + r1 * s0, m1)
+  let p3 = pt(o0 + s0, m1)
+  
+  let p4 = pt(o0 + r0 * s0, m1 - size0 / 2)
+  let p5 = pt(o0 + r0 * s0, m1 + size0 / 2)
+  
+  let p6 = pt(o0 + r1 * s0, m1 - size1 / 2)
+  let p7 = pt(o0 + r1 * s0, m1 + size1 / 2)
+
+  let line = draw.line.with(stroke: stroke)
+  let f = draw.group(name: id, {
+    line(p0, p1)
+    line(p2, p3)
+    line(p4, p5)
+    line(p6, p7)
+
+    if symbols.first() != none {
+      draw.content(
+        p1,
+        symbols.first(),
+        anchor: if vertical {"south-west"} else {"south-east"},
+        padding: 2pt
+      )
+    }
+
+    if symbols.last() != none {
+      draw.content(
+        p2,
+        symbols.last(),
+        anchor: if vertical {"north-west"} else {"south-west"},
+        padding: 2pt
+      )
+    }
+  })
+
+  return (f, tl, tr, br, bl)
+}
+
+/// Draws a capacitor
+///
+/// #examples.capacitor
+/// For other parameters description, see #doc-ref("element.elmt")
+/// - vertical (bool): Whether the element is vertical or horizontal.
+///   - If false, port 0 is placed on the west side and port 1 on the east.\
+///   - If true, they are on the north, respectively the south sides
+/// - gap (number, ratio): The gap between both sides
+///   - if it is a number (int or float), it is interpreted as an absolute canvas-unit length
+///   - if it is a ratio, it is interpreted as proportional to the capacitor's length (width if horizontal, height if vertical)
+/// - scales (array): A pair of ratios, the sizes of the sides relative to the capacitor's height (width if vertical).
+/// - symbols (array): A pair of content or strings (or none values) to attach on the sides of the capacitor
+#let capacitor(
+  x: none,
+  y: none,
+  w: none,
+  h: none,
+  name: none,
+  name-anchor: "center",
+  vertical: false,
+  gap: 0.2,
+  scales: (100%, 100%),
+  symbols: (none, none),
+  fill: none,
+  stroke: black + 1pt,
+  id: "",
+  debug: (
+    ports: false
+  )
+) = {
+  let ports = if vertical {(
+    north: ((id: "0"),),
+    south: ((id: "1"),)
+  )} else {(
+    west: ((id: "0"),),
+    east: ((id: "1"),)
+  )}
+  
+  element.elmt(
+    draw-shape: draw-shape.with(
+      vertical: vertical,
+      gap: gap,
+      scales: scales,
+      symbols: symbols
+    ),
+    x: x,
+    y: y,
+    w: w,
+    h: h,
+    name: name,
+    name-anchor: name-anchor,
+    ports: ports,
+    fill: fill,
+    stroke: stroke,
+    id: id,
+    debug: debug
+  )
+}

src/elements/electrical/resistor.typ

@@ -0,0 +1,106 @@
+#import "@preview/cetz:0.2.2": draw
+#import "../element.typ"
+#import "../ports.typ": add-port
+
+#let draw-shape(
+  id, tl, tr, br, bl,
+  fill, stroke,
+  zigzags: 6,
+  vertical: false
+) = {
+  let (x0, y0) = tl
+  let (x1, y1) = br
+
+  let w = x1 - x0
+  let h = y1 - y0
+
+  let (o0, s0) = if vertical {(y0, h)} else {(x0, w)}
+  let (o1, s1) = if vertical {(x0, w)} else {(y0, h)}
+  let m1 = o1 + s1 / 2
+
+  let pt(i, j) = if vertical {
+    (j, i)
+  } else {
+    (i, j)
+  }
+
+  let p0 = pt(o0, m1)
+  let p1 = pt(o0 + 0.2 * s0, m1)
+  let p2 = pt(o0 + 0.8 * s0, m1)
+  let p3 = pt(o0 + s0, m1)
+
+  if zigzags == none {
+    let p4 = pt(o0 + 0.2 * s0, o1)
+    let p5 = pt(o0 + 0.8 * s0, o1 + s1)
+    let f = draw.group(name: id, {
+      draw.line(p0, p1)
+      draw.line(p2, p3)
+      draw.rect(p4, p5, stroke: stroke, fill: fill)
+    })
+    return (f, tl, tr, br, bl)
+  }
+  
+  let pts = (p0, p1)
+  
+  for i in range(zigzags) {
+    let r = ((i+0.5) / zigzags * 0.6 + 0.2)
+    let pos = pt(o0 + r * s0, o1 + s1 * calc.rem(i, 2))
+    pts.push(pos)
+  }
+
+  pts += (p2, p3)
+
+  let f = draw.group(name: id, {
+    draw.line(..pts, stroke: stroke)
+  })
+  return (f, tl, tr, br, bl)
+}
+
+/// Draws a resistor
+///
+/// #examples.resistor
+/// For other parameters description, see #doc-ref("element.elmt")
+/// - vertical (bool): Whether the element is vertical or horizontal. If false, port 0 is placed on the west side and port 1 on the east. If true, they are on the north, respectively the south sides
+/// - zigzags (number, none): Number of zigzags to draw. If none, a rectangle is drawn
+#let resistor(
+  x: none,
+  y: none,
+  w: none,
+  h: none,
+  name: none,
+  name-anchor: "center",
+  vertical: false,
+  zigzags: 6,
+  fill: none,
+  stroke: black + 1pt,
+  id: "",
+  debug: (
+    ports: false
+  )
+) = {
+  let ports = if vertical {(
+    north: ((id: "0"),),
+    south: ((id: "1"),)
+  )} else {(
+    west: ((id: "0"),),
+    east: ((id: "1"),)
+  )}
+
+  element.elmt(
+    draw-shape: draw-shape.with(
+      vertical: vertical,
+      zigzags: zigzags
+    ),
+    x: x,
+    y: y,
+    w: w,
+    h: h,
+    name: name,
+    name-anchor: name-anchor,
+    ports: ports,
+    fill: fill,
+    stroke: stroke,
+    id: id,
+    debug: debug
+  )
+}

src/elements/logic/iec_and.typ

@@ -1,70 +0,0 @@
-#import "@preview/cetz:0.3.2": draw
-// #import "iec_gate.typ" as iec-gate
-#import "iec_gate.typ" as iec-gate
-
-
-/// Draws an IEC-AND gate. This function is also available as `element.iec-gate-and()`
-/// 
-/// For parameters, see #doc-ref("gates.iec-gate")
-/// #examples.iec-gate-and
-#let iec-gate-and(
-  x: none,
-  y: none,
-  w: none,
-  h: none,
-  inputs: 2,
-  fill: none,
-  stroke: black + 1pt,
-  id: "",
-  inverted: (),
-  debug: (
-    ports: false
-  ),
-) = {
-  iec-gate.iec-gate(
-    x: x,
-    y: y,
-    w: w,
-    h: h,
-    inputs: inputs,
-    fill: fill,
-    stroke: stroke,
-    id: id,
-    inverted: inverted,
-    debug: debug,
-    symbol: $amp$,
-  )
-
-}
-
-/// Draws an IEC-NAND gate. This function is also available as `element.iec-gate-nand()`
-/// 
-/// For parameters, see #doc-ref("gates.iec-gate")
-/// #examples.iec-gate-nand
-#let iec-gate-nand(
-  x: none,
-  y: none,
-  w: none,
-  h: none,
-  inputs: 2,
-  fill: none,
-  stroke: black + 1pt,
-  id: "",
-  inverted: (),
-  debug: (
-    ports: false
-  ),
-) = {
-  iec-gate-and(
-    x: x,
-    y: y,
-    w: w,
-    h: h,
-    inputs: inputs,
-    fill: fill,
-    stroke: stroke,
-    id: id,
-    inverted: if inverted != "all" {inverted + ("out",)} else {inverted},
-    debug: debug,
-  )
-}

src/elements/logic/iec_buf.typ

@@ -1,68 +0,0 @@
-#import "@preview/cetz:0.3.2": draw
-#import "iec_gate.typ" as iec-gate
-
-
-/// Draws an IEC buffer gate. This function is also available as `element.iec-gate-buf()`
-///
-/// For parameters, see #doc-ref("gates.iec-gate")
-/// #examples.iec-gate-buf
-#let iec-gate-buf(
-  x: none,
-  y: none,
-  w: none,
-  h: none,
-  inputs: 2,
-  fill: none,
-  stroke: black + 1pt,
-  id: "",
-  inverted: (),
-  debug: (
-    ports: false,
-  ),
-) = {
-  iec-gate.iec-gate(
-    x: x,
-    y: y,
-    w: w,
-    h: h,
-    inputs: inputs,
-    fill: fill,
-    stroke: stroke,
-    id: id,
-    inverted: inverted,
-    debug: debug,
-    symbol: "1",
-  )
-}
-
-/// Draws an IEC NOT gate. This function is also available as `element.iec-gate-not()`
-/// 
-/// For parameters, see #doc-ref("gates.iec-gate")
-/// #examples.iec-gate-not
-#let iec-gate-not(
-  x: none,
-  y: none,
-  w: none,
-  h: none,
-  inputs: 2,
-  fill: none,
-  stroke: black + 1pt,
-  id: "",
-  inverted: (),
-  debug: (
-    ports: false,
-  ),
-) = {
-  iec-gate-buf(
-    x: x,
-    y: y,
-    w: w,
-    h: h,
-    inputs: inputs,
-    fill: fill,
-    stroke: stroke,
-    id: id,
-    inverted: if inverted != "all" { inverted + ("out",) } else { inverted },
-    debug: debug,
-  )
-}

src/elements/logic/iec_gate.typ

@@ -1,125 +0,0 @@
-#import "@preview/cetz:0.3.2": draw, coordinate
-#import "../ports.typ": add-ports, add-port
-#import "../element.typ"
-
-#let default-draw-shape(id, tl, tr, br, bl, fill, stroke, symbol) = {
-  let shapes = draw.rect(
-    inset: 0.5em,
-    fill: fill,
-    stroke: stroke,
-    name: id,
-    bl, tr
-  )
-  shapes += draw.content(
-    id + ".center",
-    [*$ symbol $*]
-  )
-  return (shapes, tl, tr, br, bl)
-}
-
-/// Draws a logic gate. This function is also available as `element.iec-gate()`
-///
-/// - draw-shape (function): see #doc-ref("element.elmt")
-/// - x (number, dictionary): see #doc-ref("element.elmt")
-/// - y (number, dictionary): see #doc-ref("element.elmt")
-/// - w (number): see #doc-ref("element.elmt")
-/// - h (number): see #doc-ref("element.elmt")
-/// - inputs (int): The number of inputs
-/// - fill (none, color): see #doc-ref("element.elmt")
-/// - stroke (stroke): see #doc-ref("element.elmt")
-/// - id (str): see #doc-ref("element.elmt")
-/// - inverted (str, array): Either "all" or an array of port ids to display as inverted
-/// - inverted-radius (number): The radius of inverted ports dot
-/// - debug (dictionary): see #doc-ref("element.elmt")
-/// - symbol (str): The symbol to display at the center of the gate
-#let iec-gate(
-  draw-shape: default-draw-shape,
-  x: none,
-  y: none,
-  w: none,
-  h: none,
-  inputs: 2,
-  fill: none,
-  stroke: black + 1pt,
-  id: "",
-  inverted: (),
-  inverted-radius: 0.1,
-  debug: (
-    ports: false
-  ),
-  symbol: "",
-) = draw.get-ctx(ctx => {
-  let width = w
-  let height = h
-
-  let x = x
-  let y = y
-  if x == none { panic("Parameter x must be set") }
-  if y == none { panic("Parameter y must be set") }
-  if w == none { panic("Parameter w must be set") }
-  if h == none { panic("Parameter h must be set") }
-
-  if (type(x) == dictionary) {
-    let offset = x.rel
-    let to = x.to
-    let (ctx, to-pos) = coordinate.resolve(ctx, (rel: (offset, 0), to: to))
-    x = to-pos.at(0)
-  }
-  
-  if (type(y) == dictionary) {
-    let from = y.from
-    let to = y.to
-    
-    let dy
-    if to == "out" {
-      dy = height / 2
-    } else {
-      dy = height * (i + 0.5) / inputs
-    }
-    
-    let (ctx, from-pos) = coordinate.resolve(ctx, from)
-    y = from-pos.at(1) + dy - height
-  }
-
-  let tl = (x, y + height)
-  let tr = (x + width, y + height)
-  let br = (x + width, y)
-  let bl = (x, y)
-
-  // Workaround because CeTZ needs to have all draw functions in the body
-  let func = {}
-  (func, tl, tr, br, bl) = draw-shape(id, tl, tr, br, bl, fill, stroke, symbol)
-  func
-
-  let space = 100% / inputs
-  for i in range(inputs) {
-    let pct = (i + 0.5) * space
-    let port-pos = (tl, pct, bl)
-    let port-name = "in" + str(i)
-    if inverted == "all" or port-name in inverted {
-      draw.circle(
-        port-pos,
-        radius: inverted-radius,
-        anchor: "east",
-        stroke: stroke
-      )
-      port-pos = (rel: (-2 * inverted-radius, 0), to: port-pos)
-    }
-    add-port(
-      id, "west",
-      (id: port-name), port-pos,
-      debug: debug.ports
-    )
-  }
-
-  let out-pos = id + ".east"
-  if inverted == "all" or "out" in inverted {
-    draw.circle(out-pos, radius: inverted-radius, anchor: "west", stroke: stroke)
-    out-pos = (rel: (2 * inverted-radius, 0), to: out-pos)
-  }
-  add-port(
-    id, "east",
-    (id: "out"), out-pos,
-    debug: debug.ports
-  )
-})

src/elements/logic/iec_or.typ

@@ -1,67 +0,0 @@
-#import "@preview/cetz:0.3.2": draw
-#import "iec_gate.typ" as iec-gate
-
-/// Draws an IEC-OR gate. This function is also available as `element.iec-gate-or()`
-/// 
-/// For parameters, see #doc-ref("gates.iec-gate")
-/// #examples.iec-gate-or
-#let iec-gate-or(
-  x: none,
-  y: none,
-  w: none,
-  h: none,
-  inputs: 2,
-  fill: none,
-  stroke: black + 1pt,
-  id: "",
-  inverted: (),
-  debug: (
-    ports: false
-  )
-) = {
-  iec-gate.iec-gate(
-    x: x,
-    y: y,
-    w: w,
-    h: h,
-    inputs: inputs,
-    fill: fill,
-    stroke: stroke,
-    id: id,
-    inverted: inverted,
-    debug: debug,
-    symbol: $>= 1$,
-  )
-}
-
-/// Draws an IEC-NOR gate. This function is also available as `element.iec-gate-nor()`
-/// 
-/// For parameters, see #doc-ref("gates.iec-gate")
-/// #examples.iec-gate-nor
-#let iec-gate-nor(
-  x: none,
-  y: none,
-  w: none,
-  h: none,
-  inputs: 2,
-  fill: none,
-  stroke: black + 1pt,
-  id: "",
-  inverted: (),
-  debug: (
-    ports: false
-  )
-) = {
-  iec-gate-or(
-    x: x,
-    y: y,
-    w: w,
-    h: h,
-    inputs: inputs,
-    fill: fill,
-    stroke: stroke,
-    id: id,
-    inverted: if inverted != "all" {inverted + ("out",)} else {inverted},
-    debug: debug
-  )
-}

src/elements/logic/iec_xor.typ

@@ -1,67 +0,0 @@
-#import "@preview/cetz:0.3.2": draw
-#import "iec_gate.typ" as iec-gate
-
-/// Draws an IEC-XOR gate. This function is also available as `element.iec-gate-xor()`
-/// 
-/// For parameters, see #doc-ref("gates.iec-gate")
-/// #examples.iec-gate-xor
-#let iec-gate-xor(
-  x: none,
-  y: none,
-  w: none,
-  h: none,
-  inputs: 2,
-  fill: none,
-  stroke: black + 1pt,
-  id: "",
-  inverted: (),
-  debug: (
-    ports: false
-  )
-) = {
-  iec-gate.iec-gate(
-    x: x,
-    y: y,
-    w: w,
-    h: h,
-    inputs: inputs,
-    fill: fill,
-    stroke: stroke,
-    id: id,
-    inverted: inverted,
-    debug: debug,
-    symbol: $= 1$,
-  )
-}
-
-/// Draws an IEC-XNOR gate. This function is also available as `element.iec-gate-xnor()`
-/// 
-/// For parameters, see #doc-ref("gates.iec-gate")
-/// #examples.iec-gate-xnor
-#let iec-gate-xnor(
-  x: none,
-  y: none,
-  w: none,
-  h: none,
-  inputs: 2,
-  fill: none,
-  stroke: black + 1pt,
-  id: "",
-  inverted: (),
-  debug: (
-    ports: false
-  )
-) = {
-  iec-gate-xor(
-    x: x,
-    y: y,
-    w: w,
-    h: h,
-    inputs: inputs,
-    fill: fill,
-    stroke: stroke,
-    id: id,
-    inverted: if inverted != "all" {inverted + ("out",)} else {inverted},
-    debug: debug
-  )
-}

src/gates.typ

@@ -3,8 +3,3 @@
 #import "elements/logic/or.typ": gate-or, gate-nor
 #import "elements/logic/xor.typ": gate-xor, gate-xnor
 #import "elements/logic/buf.typ": gate-buf, gate-not
-#import "elements/logic/iec_gate.typ": iec-gate
-#import "elements/logic/iec_and.typ": iec-gate-and, iec-gate-nand
-#import "elements/logic/iec_or.typ": iec-gate-or, iec-gate-nor
-#import "elements/logic/iec_buf.typ": iec-gate-buf, iec-gate-not
-#import "elements/logic/iec_xor.typ": iec-gate-xor, iec-gate-xnor

src/lib.typ

@@ -1,6 +1,7 @@
 #let version = version(0, 2, 0)
 
 #import "circuit.typ": circuit
+#import "electrical.typ"
 #import "element.typ"
 #import "gates.typ"
 #import "util.typ"

src/wire.typ

@@ -3,7 +3,7 @@
 
 /// List of valid wire styles
 /// #examples.wires
-#let wire-styles = ("direct", "zigzag", "dodge", "guided")
+#let wire-styles = ("direct", "zigzag", "dodge")
 #let signal-width = 1pt
 #let bus-width = 1.5pt
 
@@ -109,88 +109,6 @@
   return (points, anchors)
 }
 
-#let get-guided-wire(pts, margins, sides, center-guides, ctx) = {
-  let start = pts.first()
-  let end = pts.last()
-  let (margin-start, margin-end) = margins
-  let (side-start, side-end) = sides
-  let (center_horizontal, center_vertical) = center-guides
-
-  let (ctx, p0) = coordinate.resolve(ctx, start)
-  let (ctx, p6) = coordinate.resolve(ctx, end)
-  p0 = (x: p0.first(), y: p0.at(1))
-  p6 = (x: p6.first(), y: p6.at(1))
-
-  let box_width = calc.abs(p6.x - p0.x)
-  let box_height = calc.abs(p6.y - p0.y)
-
-  // finding correct dx and dy
-  let dx1 = box_width * margin-start / 100%
-  if side-start == "west" {
-    dx1 *= -1
-  } else if side-start == "north" or side-start == "south" { dx1 = 0}
-
-  let dx2 = box_width * margin-end / 100%
-  if side-end == "west" {
-    dx2 *= -1
-  } else if side-end == "north" or side-end == "south" { dx2 = 0}
-
-  let dy1 = box_height * margin-start / 100%
-  if side-start == "south" {
-    dy1 *= -1
-  } else if side-start == "west" or side-start == "east" { dy1 = 0}
-
-  let dy2 = box_height * margin-end / 100%
-  if side-end == "south" {
-    dy2 *= -1
-  } else if side-end == "west" or side-end == "east" { dy2 = 0}
-
-
-  // points that are closest to the edge points
-  let p1 = (p0.x + dx1, p0.y + dy1)
-  let p5 = (p6.x + dx2, p6.y + dy2)
-
-
-  // middle point
-  let center_x = p0.x + box_width * center_horizontal / 100%
-  let center_y = p0.y + box_height * center_vertical / 100%
-  let p3 = (center_x, center_y)
-
-  // setting up the points for that touch the guides
-  let p2 = (0,0)
-  let p4 = (0,0)
-  if side-start in ("north", "south") {
-    p2 = (horizontal: p3, vertical: p1)
-  } else {
-    p2 = (horizontal: p1, vertical: p3)
-  }
-  if side-end in ("north", "south") {
-    p4 = (horizontal: p3, vertical: p5)
-  } else if side-end in ("east", "west") {
-    p4 = (horizontal: p5, vertical: p3)
-  }
-
-  // returning
-  let points = (
-    start,
-    p1,
-    p2,
-    p3,
-    p4,
-    p5,
-    end
-  )
-  let anchors = (
-    "start": start,
-    "start2": points.at(1),
-    "guide-start": points.at(2),
-    "center": points.at(3),
-    "guide-end": points.at(4),
-    "end2": points.at(5),
-    "end": end
-  )
-  return (points, anchors)
-}
 /// Draws a wire between two points
 /// - id (str): The wire's id, for future reference (anchors)
 /// - pts (array): The two points (as CeTZ compatible coordinates, i.e. XY, relative positions, ids, etc.)
@@ -209,9 +127,6 @@
 /// - dodge-y (number): Y position to dodge the wire to (only with style "dodge")
 /// - dodge-sides (array): The start and end sides (going out of the connected element) of the wire (only with style "dodge")
 /// - dodge-margins (array): The start and end margins (i.e. space before dodging) of the wire (only with style "dodge")
-/// - guided-center (array): the horizontal and vertical guides of the center guides (only with style "guided")
-/// - guided-margins (array): the start and end of guided margins of the wire (only with style "guided")
-/// - guided-sides (array): the side of start and end array (must be either "north", "south", "west", "east") (only work with style "guided")
 #let wire(
   id, pts,
   bus: false,
@@ -222,9 +137,6 @@
   dashed: false,
   style: "direct",
   reverse: false,
-  guided-center: (50%, 50%),
-  guided-margins: (5%, 5%),
-  guided-sides: ("east", "west"),
   directed: false,
   rotate-name: true,
   zigzag-ratio: 50%,
@@ -266,14 +178,6 @@
       dodge-sides,
       ctx
     )
-  } else if style == "guided" {
-    (points, anchors) = get-guided-wire(
-      pts,
-      guided-margins,
-      guided-sides,
-      guided-center,
-      ctx
-    )
   }
 
   let mark = (fill: color)