feat: Add anchor-based zigzag bend placement via zigzag-at

Introduce a new `zigzag-at` parameter on `wire.wire` as an alternative
to `zigzag-ratio` for positioning the middle bend segment of a
`style: "zigzag"` wire. Instead of a fraction of the endpoint span,
the bend is placed on the axis of a referenced anchor via CeTZ's
perpendicular operator (`|-`):

  - zigzag-dir "vertical":   segment sits at anchor.x
  - zigzag-dir "horizontal": segment sits at anchor.y

Accepted forms:
  - str                         — raw CeTZ anchor name (e.g. port anchor
                                  "elmt-port-id" or "elmt.center")
  - array / native CeTZ dict    — used as-is
  - (rel: <length>, to: <coord>) with scalar rel — ergonomic axial
    offset, rewritten to (rel: (dx, 0), to: ...) for vertical dir or
    (rel: (0, dy), to: ...) for horizontal dir

`zigzag-ratio` default flipped from `50%` to `auto` (still resolves
to 50%) to allow detecting an explicit user override. Panics on
misuse:
  - `zigzag-at` set together with an explicit `zigzag-ratio`
  - `zigzag-at` set with a non-zigzag `style`

Add `examples.zigzag-at` demonstrating both the string-anchor and the
ergonomic offset forms.

doc/examples.typ

@@ -23,6 +23,31 @@ wire.stub("block-port-in2", "west")
 wire.stub("block-port-out", "east")
 ```)
 
+#let align-with-ports = example(```
+// `align-with` reuses another port's coord
+// (E/W: y, N/S: x). Forms:
+//  1. "id"                     — local
+//  2. (element:"e", port:"p")  — cross-elmt
+//  3. "raw-anchor"             — CeTZ anchor
+element.block(x: 0, y: 0, w: 2, h: 2, id: "b1",
+  ports: (
+    west: ((id: "a", name: "A", y: 30%),),
+    east: ((id: "oa", name: "A'",
+            "align-with": "a"),),
+  ))
+element.block(x: 4, y: -.3, w: 2, h: 2.6, id: "b2",
+  ports: (
+    west: ((id: "ia", name: "A",
+            "align-with":
+              (element: "b1", port: "oa")),),
+    east: ((id: "o", name: "C"),),
+  ))
+wire.stub("b1-port-a", "west")
+wire.wire("w", ("b1-port-oa", "b2-port-ia"),
+          style: "direct")
+wire.stub("b2-port-o", "east")
+```, vertical: true)
+
 #let extender = example(```
 element.extender(
   x: 0, y: 0, w: 3, h: 1,
@@ -351,6 +376,29 @@ wire.stub("b-port-clk", "north")
 wire.stub("b-port-rdy", "south")
 ```)
 
+#let shell = example(```
+// A shell block acts as a container: port name labels are drawn
+// outside by default, and wires attach at the *inside* tip of
+// pentagon-shaped ports so child elements can sit within.
+element.block(
+  id: "sh", w: 5, h: 3, x: 0, y: 0,
+  shell: true,
+  port-shape: "pentagon",
+  fill: util.colors.blue.lighten(80%),
+  ports: (
+    west: ((id: "in",  name: "IN"),),
+    east: ((id: "out", name: "OUT", kind: "out"),),
+  ),
+  {
+    element.block(id: "inner", w: 2, h: 1.5, x: 1.5, y: 0.75,
+      fill: util.colors.yellow,
+      ports: (west: ((id: "a"),), east: ((id: "b"),)))
+  }
+)
+wire.wire("w-in",  ("sh-port-in",  "inner-port-a"))
+wire.wire("w-out", ("inner-port-b", "sh-port-out"))
+```)
+
 #let intersection = example(```
 wire.wire("w1", ((0, 0), (1, 1)), style: "zigzag")
 wire.wire("w2", ((0, 0), (1, -.5)),
@@ -399,3 +447,24 @@ element.block(x: 18.5, y: -3.5, w: 1.5, h: 1.5, id: "sB",
 wire.wire("uSS", ("sA-port-out", "sB-port-out"),
           style: "u-shape", u-side: "south", u-depth: 0.5)
 ```, vertical: true)
+
+#let zigzag-at = example(```
+// `zigzag-at` places the middle bend of a zigzag wire
+// on the axis of a referenced anchor, overriding
+// `zigzag-ratio`.
+element.block(x: 0, y: 0, w: 1.5, h: 1.5, id: "src",
+  ports: (east: ((id: "o", name: "O"),),))
+element.block(x: 3, y: -1.2, w: 1, h: 1, id: "ref",
+  fill: util.colors.pink,
+  ports: (west: ((id: "p", name: "R"),),))
+element.block(x: 5.5, y: -2, w: 1.5, h: 1.5, id: "dst",
+  ports: (west: ((id: "i", name: "I"),),))
+// String form: anchor name of a port.
+wire.wire("w1", ("src-port-o", "dst-port-i"),
+          style: "zigzag",
+          zigzag-at: "ref-port-p")
+// Ergonomic offset: shift 8pt right of ref.east.
+wire.wire("w2", ("src-port-o", "dst-port-i"),
+          style: "zigzag",
+          zigzag-at: (rel: 8pt, to: "ref.east"))
+```, vertical: true)

src/elements/block.typ

@@ -25,7 +25,13 @@
 /// #examples.port-names-outside
 /// For other parameters description, see #doc-ref("element.elmt")
 /// - radius (number, length, ratio, dictionary): The corner radius of the block. See CeTZ documentation for more information
+/// - shell (bool): If true, the block behaves like a shell/container (analogous to a group): port name labels default to being drawn outside the block, and wires attach to the inside tip of pentagon-shaped ports. See #doc-ref("element.elmt")
+///
+/// Use `shell: true` to wrap child elements inside a bordered container without
+/// having ports overlap the interior:
+/// #examples.shell
 #let block(
+  ..args,
   x: none,
   y: none,
   w: none,
@@ -35,7 +41,7 @@
   ports: (),
   ports-margins: (),
   port-name-padding: 2pt,
-  port-names-outside: false,
+  port-names-outside: auto,
   port-shape: none,
   port-kind: "in",
   port-size: 1em,
@@ -43,11 +49,13 @@
   radius: 0.5em,
   stroke: black + 1pt,
   id: "",
+  shell: false,
   debug: (
     ports: false
   )
 ) = element.elmt(
   draw-shape: draw-shape.with(radius: radius),
+  body: if args.pos().len() > 0 { args.pos().first() } else { none },
   x: x,
   y: y,
   w: w,
@@ -64,5 +72,6 @@
   fill: fill,
   stroke: stroke,
   id: id,
+  shell: shell,
   debug: debug
 )

src/elements/element.typ

@@ -36,9 +36,12 @@
 ///   - `name` (`str`): Optional name displayed *in* the block
 ///   - `clock` (`bool`): Whether it is a clock port (triangle symbol)
 ///   - `vertical` (`bool`): Whether the name should be drawn vertically
+///   - `align-with` (`str`, `dictionary`): Optional. Reuse another port's placement coordinate (east/west: y, north/south: x). Accepted forms: `"<local-id>"` (same-element port; axis must match, transitively resolved, cycles panic), `(element: "<id>", port: "<id>")` (cross-element; axis not validated; target element must be drawn first), or `"<raw-anchor>"` (any unrecognised string is used as a CeTZ anchor name). See #examples.align-with-ports
+///   - `x` (length, ratio, function): Optional. North/south ports only. Explicit x-offset override measured from the left corner of the side. A `ratio` is used as a percentage along the side; a length/number is used as an absolute offset; a function is called with the element width and must return a length/number. Panics if used together with `align-with` or on an east/west port.
+///   - `y` (length, ratio, function): Optional. East/west ports only. Analogous to `x`, measured from the top corner of the side and called with the element height when a function is passed.
 /// - ports-margins (dictionary): Dictionary of ports margins (used with automatic port placement). They keys are cardinal directions ("north", "east", "south", "west"). The values are tuples of (`<start>`, `<end>`) margins (numbers)
 /// - port-name-padding (number, length): Padding between the port name label and the port anchor point (default `2pt`)
-/// - port-names-outside (bool): If true, port name labels are drawn on the outside of the block instead of the inside (default `false`)
+/// - port-names-outside (bool, auto): If true, port name labels are drawn on the outside of the block instead of the inside. When `auto` (default), follows the `shell` setting (outside if `shell: true`, inside otherwise)
 /// - port-shape (none, str): Default port shape for all ports of this element. Set to `"pentagon"` to draw pentagon-shaped ports. Overridable per port via the port's `shape` field. See #examples.port-shape
 /// - port-kind (str): Default direction of ports (`"in"` or `"out"`). Overridable per port via the port's `kind` field
 /// - port-size (length): Default unit size of pentagon-shaped ports (default `1em`). Overridable per port via the port's `size` field
@@ -47,6 +50,7 @@
 /// - id (str): The block id (for future reference)
 /// - auto-ports (bool): Whether to use auto port placements or not. If false, `draw-shape` is responsible for adding the appropiate ports
 /// - ports-y (dictionary): Dictionary of the ports y offsets (used with `auto-ports: false`)
+/// - shell (bool): If true, the block behaves like a shell/container (analogous to a group): port name labels default to being drawn *outside* the block border, and wires attach to the *inside* tip of pentagon-shaped ports instead of the outside base. Useful for wrapping child elements without having ports overlap them (default `false`)
 /// - debug (dictionary): Dictionary of debug options.
 ///
 ///   Supported fields include:
@@ -62,7 +66,7 @@
   ports: (:),
   ports-margins: (:),
   port-name-padding: 2pt,
-  port-names-outside: false,
+  port-names-outside: auto,
   port-shape: none,
   port-kind: "in",
   port-size: 1em,
@@ -71,6 +75,8 @@
   id: "",
   auto-ports: true,
   ports-y: (:),
+  shell: false,
+  body: none,
   debug: (
     ports: false
   )
@@ -145,19 +151,27 @@
   }
 
   if auto-ports {
+    let outside-name = if port-names-outside == auto { shell } else { port-names-outside }
     add-ports(
       id,
       tl, tr, br, bl,
       ports,
       ports-margins,
+      width: width,
+      height: height,
       debug: debug.ports,
       name-padding: port-name-padding,
-      outside-name: port-names-outside,
+      outside-name: outside-name,
       port-shape: port-shape,
       port-kind: port-kind,
       port-size: port-size,
       elmt-stroke: stroke,
       elmt-fill: fill,
+      wire-inside: shell,
     )
   }
+
+  if body != none {
+    body
+  }
 })

src/elements/ports.typ

@@ -13,6 +13,7 @@
   port-size: 1em,
   elmt-stroke: black + 1pt,
   elmt-fill: none,
+  wire-inside: false,
 ) = {
   let name = port.at("name", default: "")
   let name-rotate = port.at("vertical", default: false)
@@ -38,12 +39,14 @@
   if shape == "pentagon" {
     let sh = port-shape-vertices(side, kind, size)
     let v = sh.vertices.map(off => (rel: off, to: pos))
-    draw.line(
+    // Draw pentagon on a higher layer so it always renders on top of wires
+    // and neighbouring elements.
+    draw.on-layer(1, draw.line(
       v.at(0), v.at(1), v.at(2), v.at(3), v.at(4),
       close: true,
       stroke: shape-stroke,
       fill: shape-fill,
-    )
+    ))
     outer-pos = (rel: sh.outer, to: pos)
     inner-pos = (rel: sh.inner, to: pos)
   } else if is-clock {
@@ -80,6 +83,10 @@
   // (or from the boundary when shape is disabled).
   let label-pos = if outside-name { outer-pos } else { inner-pos }
 
+  // For "shell" containers, wires must attach at the inside of the pentagon
+  // (the tip that points inward), not at the exterior base.
+  let anchor-pos = if wire-inside and shape == "pentagon" { inner-pos } else { outer-pos }
+
   draw.content(
     label-pos,
     anchor: name-anchor,
@@ -91,7 +98,7 @@
 
   if debug {
     draw.circle(
-      outer-pos,
+      anchor-pos,
       name: id,
       radius: .1,
       stroke: none,
@@ -100,7 +107,7 @@
     
   } else {
     draw.hide(draw.circle(
-      outer-pos,
+      anchor-pos,
       radius: 0,
       stroke: none,
       name: id
@@ -108,11 +115,126 @@
   }
 }
 
+// Normalize an `align-with` value to either:
+//   - `(local: <id>)`    → reference to another port of the *same* element
+//   - `(external: <anchor-name>)` → CeTZ anchor name of a port in another element
+// Accepted input forms:
+//   - `str` matching a local port id → local
+//   - `str` not matching any local port id → external, used as-is as CeTZ anchor
+//   - `(element: <str>, port: <str>)` → external, anchor = `<element>-port-<port>`
+#let classify-align-with(raw-val, placements) = {
+  if type(raw-val) == dictionary {
+    if "element" in raw-val and "port" in raw-val {
+      return (external: raw-val.element + "-port-" + raw-val.port)
+    }
+    panic("`align-with` dictionary must contain `element` and `port` keys, got: " + repr(raw-val))
+  }
+  if type(raw-val) != str {
+    panic("`align-with` must be a string or `(element:, port:)` dictionary, got: " + repr(raw-val))
+  }
+  if raw-val in placements {
+    return (local: raw-val)
+  }
+  return (external: raw-val)
+}
+
+// Resolve a single port's placement, following `align-with` references
+// transitively and detecting cycles.
+//
+// Returns `(placements, result)` where `result` is either:
+//   - `(pct: <ratio>)`               → percentage along the side (local placement)
+//   - `(external: <anchor-name>)`    → align with the given remote CeTZ anchor
+#let resolve-placement(placements, id, visiting, elmt-id: "") = {
+  let where = if elmt-id != "" { " (element '" + elmt-id + "')" } else { "" }
+  let p = placements.at(id)
+  if p.at("resolved", default: false) {
+    if "external-ref" in p {
+      return (placements, (external: p.external-ref))
+    }
+    return (placements, (pct: p.pct))
+  }
+  if id in visiting {
+    panic("align-with cycle involving port '" + id + "'" + where + " (path: "
+      + visiting.join(" -> ") + " -> " + id + ")")
+  }
+
+  let raw = p.raw
+  let side = p.side
+  let is-ew = side in ("east", "west")
+
+  let has-align = "align-with" in raw
+  let has-x = "x" in raw
+  let has-y = "y" in raw
+  let has-num = has-x or has-y
+
+  if has-align and has-num {
+    panic("Port '" + id + "'" + where + ": cannot combine `align-with` with `x`/`y` override")
+  }
+  if is-ew and has-x {
+    panic("Port '" + id + "'" + where + " on side '" + side
+      + "': use `y` for placement override on east/west sides, not `x`")
+  }
+  if (not is-ew) and has-y {
+    panic("Port '" + id + "'" + where + " on side '" + side
+      + "': use `x` for placement override on north/south sides, not `y`")
+  }
+
+  let result = none
+  if has-num {
+    let val = if is-ew { raw.y } else { raw.x }
+    let dim = if is-ew { p.height } else { p.width }
+    if type(val) == function {
+      val = val(dim)
+    }
+    let pct
+    if type(val) == ratio {
+      pct = val
+    } else {
+      // Numeric length: measured from `pt0` along the side.
+      pct = (val / dim) * 100%
+    }
+    result = (pct: pct)
+  } else if has-align {
+    let classified = classify-align-with(raw.at("align-with"), placements)
+    if "external" in classified {
+      // Cross-element / raw anchor reference: axis cannot be validated here
+      // (remote side unknown at eval time). Propagate as external.
+      result = (external: classified.external)
+    } else {
+      let ref-id = classified.local
+      let ref-side = placements.at(ref-id).side
+      let ref-ew = ref-side in ("east", "west")
+      if is-ew != ref-ew {
+        panic("Port '" + id + "'" + where + " on '" + side + "' cannot `align-with` port '"
+          + ref-id + "' on '" + ref-side + "': incompatible axis")
+      }
+      let new-visiting = visiting + (id,)
+      let res = resolve-placement(placements, ref-id, new-visiting, elmt-id: elmt-id)
+      placements = res.at(0)
+      result = res.at(1)
+    }
+  } else {
+    result = (pct: p.pct-auto)
+  }
+
+  if "external" in result {
+    p.insert("external-ref", result.external)
+    p.insert("pct", none)
+  } else {
+    p.insert("pct", result.pct)
+  }
+  p.insert("resolved", true)
+  placements.insert(id, p)
+  return (placements, result)
+}
+
 #let add-ports(
   elmt-id,
   tl, tr, br, bl,
   ports,
   ports-margins,
+  width: 0,
+  height: 0,
   debug: false,
   outside-name: false,
   name-padding: 2pt,
@@ -121,6 +243,7 @@
   port-size: 1em,
   elmt-stroke: black + 1pt,
   elmt-fill: none,
+  wire-inside: false,
 ) = {
   let sides = (
     "north": (tl, tr),
@@ -133,51 +256,117 @@
     return
   }
 
+  // ---- Phase 1: build placement table with per-port baseline pct. ----
+  let placements = (:)
+  // Preserve iteration order for phase 3.
+  let order = ()
+  // Per-side (pt0, pt1) after margin adjustment, and per-side spacing.
+  let side-info = (:)
+
   for (side, props) in sides {
     let side-ports = ports.at(side, default: ())
+    let pt0 = props.at(0)
+    let pt1 = props.at(1)
+
+    if side in ports-margins {
+      let margins = ports-margins.at(side)
+      let a = (pt0, margins.at(0), pt1)
+      let b = (pt0, 100% - margins.at(1), pt1)
+      pt0 = a
+      pt1 = b
+    }
+
     let space = 100% / (side-ports.len() + 1)
+    side-info.insert(side, (pt0: pt0, pt1: pt1, space: space))
 
     for (i, port) in side-ports.enumerate() {
-      let pct = (i + 1) * space
-      let pt0 = props.at(0)
-      let pt1 = props.at(1)
-
-      if side in ports-margins {
-        let (a, b) = (pt0, pt1)
-        let margins = ports-margins.at(side)
-        a = (pt0, margins.at(0), pt1)
-        b = (pt0, 100% - margins.at(1), pt1)
-        pt0 = a
-        pt1 = b
+      let pid = port.at("id")
+      if pid in placements {
+        panic("Duplicate port id '" + pid + "' in element '" + elmt-id
+          + "' on side '" + side + "' (existing side: '"
+          + placements.at(pid).side + "', new port: " + repr(port) + ")")
       }
-      
-      let pos = (pt0, pct, pt1)
-      let pct-prev = (i + 0.5) * space
-      let pct-next = (i + 1.5) * space
-      let pos-prev = (pt0, pct-prev, pt1)
-      let pos-next = (pt0, pct-next, pt1)
+      let pct-auto = (i + 1) * space
+      placements.insert(pid, (
+        side: side,
+        raw: port,
+        index: i,
+        pct-auto: pct-auto,
+        width: width,
+        height: height,
+        resolved: false,
+      ))
+      order.push(pid)
+    }
+  }
+
+  // ---- Phase 2: resolve overrides & align-with references. ----
+  for pid in order {
+    let res = resolve-placement(placements, pid, (), elmt-id: elmt-id)
+    placements = res.at(0)
+  }
+
+  // ---- Phase 3: draw. ----
+  for pid in order {
+    let p = placements.at(pid)
+    let side = p.side
+    let info = side-info.at(side)
+    let pt0 = info.pt0
+    let pt1 = info.pt1
+    let space = info.space
+    let port = p.raw
+    let is-ew = side in ("east", "west")
+
+    let pos
+    let pos-prev
+    let pos-next
+
+    if "external-ref" in p {
+      // Cross-element alignment: build pos via CeTZ perpendicular so this
+      // port shares one coordinate with the remote anchor and stays on this
+      // element's side line for the other coordinate.
+      //   east/west: same y as remote, x from this side (pt0.x == pt1.x)
+      //   north/south: same x as remote, y from this side (pt0.y == pt1.y)
+      let ref = p.external-ref
+      if is-ew {
+        pos      = (pt0, "|-", ref)
+        // Fallback prev/next: just the pos itself; clock ports do not
+        // combine meaningfully with cross-element align.
+        pos-prev = pos
+        pos-next = pos
+      } else {
+        pos      = (ref, "|-", pt0)
+        pos-prev = pos
+        pos-next = pos
+      }
+    } else {
+      let pct = p.pct
+      pos      = (pt0, pct, pt1)
+      pos-prev = (pt0, pct - 0.5 * space, pt1)
+      pos-next = (pt0, pct + 0.5 * space, pt1)
 
       if port.at("small", default: false) {
         pos-prev = (pos, 4pt, pt0)
         pos-next = (pos, 4pt, pt1)
       }
-
-      add-port(
-        elmt-id,
-        side,
-        port,
-        pos,
-        prev: pos-prev,
-        next: pos-next,
-        debug: debug,
-        outside-name: outside-name,
-        name-padding: name-padding,
-        port-shape: port-shape,
-        port-kind: port-kind,
-        port-size: port-size,
-        elmt-stroke: elmt-stroke,
-        elmt-fill: elmt-fill,
-      )
     }
+
+    add-port(
+      elmt-id,
+      side,
+      port,
+      pos,
+      prev: pos-prev,
+      next: pos-next,
+      debug: debug,
+      outside-name: outside-name,
+      name-padding: name-padding,
+      port-shape: port-shape,
+      port-kind: port-kind,
+      port-size: port-size,
+      elmt-stroke: elmt-stroke,
+      elmt-fill: elmt-fill,
+      wire-inside: wire-inside,
+    )
   }
 }

src/wire.typ

@@ -27,29 +27,80 @@
   return (pts, anchors)
 }
 
-#let get-zigzag-wire(pts, ratio, dir) = {
+// Normalize a `zigzag-at` value.
+//
+// Accepted forms:
+//   - `none`                              → unset; ratio-based placement is used.
+//   - `str` / tuple / native CeTZ dict    → passed through as a CeTZ coordinate.
+//   - `(rel: <length>, to: <coord>)` with a *scalar* `rel`
+//                                         → ergonomic axial offset, rewritten
+//                                           to `(rel: (rel, 0), to: to)` for
+//                                           `dir == "vertical"` or
+//                                           `(rel: (0, rel), to: to)` for
+//                                           `dir == "horizontal"`. If `rel` is
+//                                           already an array/tuple, the value
+//                                           is passed through unchanged.
+#let normalize-zigzag-at(at, dir) = {
+  if at == none { return none }
+  if type(at) == dictionary and "rel" in at and "to" in at and type(at.rel) != array {
+    let r = at.rel
+    if dir == "vertical" {
+      return (rel: (r, 0), to: at.to)
+    } else {
+      return (rel: (0, r), to: at.to)
+    }
+  }
+  return at
+}
+
+#let get-zigzag-wire(pts, ratio, dir, at: none) = {
   let start = pts.first()
   let end = pts.last()
-  let mid = if dir == "vertical" {
-    (start, ratio, (horizontal: end, vertical: ()))
-  } else {
-    (start, ratio, (horizontal: (), vertical: end))
-  }
 
-  let points = if dir == "vertical" {
-    (
-      start,
-      (horizontal: mid, vertical: ()),
-      (horizontal: (), vertical: end),
-      end
-    )
+  let points
+  if at == none {
+    // Ratio-based placement (default).
+    let mid = if dir == "vertical" {
+      (start, ratio, (horizontal: end, vertical: ()))
+    } else {
+      (start, ratio, (horizontal: (), vertical: end))
+    }
+
+    points = if dir == "vertical" {
+      (
+        start,
+        (horizontal: mid, vertical: ()),
+        (horizontal: (), vertical: end),
+        end
+      )
+    } else {
+      (
+        start,
+        (horizontal: (), vertical: mid),
+        (horizontal: end, vertical: ()),
+        end
+      )
+    }
   } else {
-    (
-      start,
-      (horizontal: (), vertical: mid),
-      (horizontal: end, vertical: ()),
-      end
-    )
+    // Anchor-based placement: the middle bend segment sits on the axis
+    // extracted from `at` via CeTZ's perpendicular operator `|-`:
+    //   - vertical:   middle segment at x = at.x
+    //   - horizontal: middle segment at y = at.y
+    points = if dir == "vertical" {
+      (
+        start,
+        (at, "|-", start),
+        (at, "|-", end),
+        end
+      )
+    } else {
+      (
+        start,
+        (start, "|-", at),
+        (end, "|-", at),
+        end
+      )
+    }
   }
   let anchors = (
     "start": start,
@@ -301,8 +352,9 @@
 /// - reverse (bool): If true, the start and end points will be swapped (useful in cases where the start point depends on the end point, for example with perpendiculars)
 /// - directed (bool): If true, the wire will be directed, meaning an arrow will be drawn at the endpoint
 /// - rotate-name (bool): If true, the name will be rotated according to the wire's slope
-/// - zigzag-ratio (ratio): Position of the zigzag vertical relative to the horizontal span (only with style "zigzag")
+/// - zigzag-ratio (auto, ratio): Position of the zigzag middle bend segment relative to the horizontal (or vertical) span, as a fraction between the two endpoints (only with style "zigzag"). Defaults to `auto`, which resolves to `50%`. Panics if combined with an explicitly set `zigzag-at`.
 /// - zigzag-dir (str): The zigzag's direction. As either "vertical" or "horizontal" (only with dstyle "zigzag")
+/// - zigzag-at (none, str, array, dictionary): Optional. Anchor-based placement of the zigzag middle bend segment (only with style "zigzag"). When set, overrides `zigzag-ratio` (which must be left at its default `auto`). The middle segment sits on the axis extracted from the given coordinate: `x` for `zigzag-dir: "vertical"`, `y` for `"horizontal"`. Accepted forms: a raw CeTZ anchor name string (e.g. `"elmt.center"` or `"elmt-port-a"`); any native CeTZ coordinate (tuple, dict such as `(rel: (dx, dy), to: anchor)`); or the ergonomic scalar-offset form `(rel: <length>, to: <coord>)`, which is rewritten to a `(dx, 0)` offset for `"vertical"` and `(0, dy)` for `"horizontal"`. See #examples.zigzag-at
 /// - dodge-y (number): Y position to dodge the wire to (only with style "dodge")
 /// - dodge-sides (array): The start and end sides (going out of the connected element) of the wire (only with style "dodge")
 /// - dodge-margins (array): The start and end margins (i.e. space before dodging) of the wire (only with style "dodge")
@@ -326,8 +378,9 @@
   guided-sides: ("east", "west"),
   directed: false,
   rotate-name: true,
-  zigzag-ratio: 50%,
+  zigzag-ratio: auto,
   zigzag-dir: "vertical",
+  zigzag-at: none,
   dodge-y: 0,
   dodge-sides: ("east", "west"),
   dodge-margins: (5%, 5%),
@@ -342,6 +395,19 @@
     panic("Wrong number of points (got " + str(pts.len()) + " instead of 2)")
   }
 
+  // `zigzag-at` validation.
+  if zigzag-at != none {
+    if style != "zigzag" {
+      panic("wire '" + id + "': `zigzag-at` requires style: \"zigzag\" (got \""
+        + style + "\")")
+    }
+    if zigzag-ratio != auto {
+      panic("wire '" + id
+        + "': cannot combine `zigzag-at` with an explicit `zigzag-ratio`")
+    }
+  }
+  let zigzag-ratio-effective = if zigzag-ratio == auto { 50% } else { zigzag-ratio }
+
   // Normalize user-provided coordinates: (x, y) -> (x, y, 0)
   let pts = pts.map(normalize-coord)
   
@@ -360,7 +426,12 @@
     (points, anchors) = get-direct-wire(pts)
     
   } else if style == "zigzag" {
-    (points, anchors) = get-zigzag-wire(pts, zigzag-ratio, zigzag-dir)
+    (points, anchors) = get-zigzag-wire(
+      pts,
+      zigzag-ratio-effective,
+      zigzag-dir,
+      at: normalize-zigzag-at(zigzag-at, zigzag-dir),
+    )
     
   } else if style == "dodge" {
     (points, anchors) = get-dodge-wire(