chore: update minimum compiler version to 0.15.0

CeTZ 0.5.2 requires 3D coordinate vectors (x, y, z) for
coordinate.resolve() and rel-coordinate specs. Update all 2-element
tuples to 3-element tuples and fix .last() to .at(1) for y-component
access on resolved 3D coordinates.

README.md

@@ -3,7 +3,7 @@
 Circuiteria is a [Typst](https://typst.app) package for drawing block circuit diagrams using the [CeTZ](https://typst.app/universe/package/cetz) package.
 
 <p align="center">
-  <img src="./gallery/platypus.png" alt="A platypus / Perry the Platypus meme made with colored rounded rectangles">
+  <img src="./gallery/platypus.png" alt="Perry the platypus">
 </p>
 
 ## Examples
@@ -11,17 +11,17 @@ Circuiteria is a [Typst](https://typst.app) package for drawing block circuit di
   <tr>
     <td colspan="2">
       <a href="./gallery/test.typ">
-        <img src="./gallery/test.png" width="500px" alt="Block diagram of a multi-cycle RISC-V FPGA processor">
+        <img src="./gallery/test.png" width="500px">
       </a>
     </td>
   </tr>
   <tr>
-    <td colspan="2">A bit of everything</td>
+    <td colspan="2">A bit of eveything</td>
   </tr>
   <tr>
     <td colspan="2">
       <a href="./gallery/test5.typ">
-        <img src="./gallery/test5.png" width="500px" alt="Block diagram of a single-cycle RISC-V processor">
+        <img src="./gallery/test5.png" width="500px">
       </a>
     </td>
   </tr>
@@ -31,12 +31,12 @@ Circuiteria is a [Typst](https://typst.app) package for drawing block circuit di
   <tr>
     <td>
       <a href="./gallery/test4.typ">
-        <img src="./gallery/test4.png" width="250px" alt="Top-level block diagram of a single-cycle RISC-V processor">
+        <img src="./gallery/test4.png" width="250px">
       </a>
     </td>
     <td>
       <a href="./gallery/test6.typ">
-        <img src="./gallery/test6.png" width="250px" alt="Block diagram of a simple single-cycle RISC-V ALU">
+        <img src="./gallery/test6.png" width="250px">
       </a>
     </td>
   </tr>
@@ -56,7 +56,7 @@ For more information, see the [manual](manual.pdf)
 
 To use this package, simply import [circuiteria](https://typst.app/universe/package/circuiteria) and call the `circuit` function:
 ```typ
-#import "@preview/circuiteria:0.2.1"
+#import "@preview/circuiteria:0.2.0"
 #circuiteria.circuit({
   import circuiteria: *
   ...

doc/examples.typ

@@ -71,30 +71,6 @@ wire.wire("w4", ("p6","p7"), style: "guided",
 
 ```, vertical: true)
 
-#let zigzag-at = example(
-  ```
-  // `zigzag-at` places the middle bend of a zigzag wire
-  // on the axis of a referenced anchor, overriding
-  // `zigzag-ratio`.
-  element.block(x: 0, y: 0, w: 1.5, h: 1.5, id: "src",
-    ports: (east: ((id: "o", name: "O"),),))
-  element.block(x: 3, y: -1.2, w: 1, h: 1, id: "ref",
-    fill: util.colors.pink,
-    ports: (west: ((id: "p", name: "R"),),))
-  element.block(x: 5.5, y: -2, w: 1.5, h: 1.5, id: "dst",
-    ports: (west: ((id: "i", name: "I"),),))
-  // String form: anchor name of a port.
-  wire.wire("w1", ("src-port-o", "dst-port-i"),
-            style: "zigzag",
-            zigzag-at: "ref-port-p")
-  // Ergonomic offset: shift 8pt right of ref.east.
-  wire.wire("w2", ("src-port-o", "dst-port-i"),
-            style: "zigzag",
-            zigzag-at: (rel: 8pt, to: "ref.east"))
-  ```,
-  vertical: true,
-)
-
 #let stub = example(```
 draw.circle((0, 0), radius: .1, name: "p")
 wire.stub("p", "north", name: "north", length: 1)

gallery/platypus.typ

@@ -1,4 +1,4 @@
-#import "@preview/circuiteria:0.2.1": *
+#import "../src/lib.typ": *
 
 #set page(width: auto, height: auto, margin: .5cm)
 

gallery/test.typ

@@ -1,4 +1,4 @@
-#import "@preview/circuiteria:0.2.1": circuit, element, util, wire
+#import "../src/lib.typ": circuit, element, util, wire
 
 #set page(width: auto, height: auto, margin: .5cm)
 
@@ -117,7 +117,7 @@
   wire.wire(
     "wExtender-ImmSrc", (
       "Extender.north",
-      (18, -2)
+      (18, -2, 0)
     ),
     style: "zigzag",
     zigzag-ratio: 0%,
@@ -138,8 +138,8 @@
   )
   wire.wire(
     "wBus", (
-      (v => (v.at(0), -3.5), mid),
-      (horizontal: (), vertical: (0, 3.5)),
+      (v => (v.at(0), -3.5, 0), mid),
+      (horizontal: (), vertical: (0, 3.5, 0)),
     ),
     bus: true
   )

gallery/test2.typ

@@ -1,4 +1,4 @@
-#import "@preview/circuiteria:0.2.1": circuit, element, util, wire
+#import "../src/lib.typ": circuit, element, util, wire
 
 #set page(width: auto, height: auto, margin: .5cm)
 
@@ -124,7 +124,7 @@
   wire.wire(
     "wExtender-ImmSrc", (
       "Extender.north",
-      (18, -2)
+      (18, -2, 0)
     ),
     style: "zigzag",
     zigzag-ratio: 0%,
@@ -145,8 +145,8 @@
   )
   wire.wire(
     "wBus", (
-      (v => (v.at(0), -3.5), mid),
-      (horizontal: (), vertical: (0, 3.5)),
+      (v => (v.at(0), -3.5, 0), mid),
+      (horizontal: (), vertical: (0, 3.5, 0)),
     ),
     bus: true
   )

gallery/test3.typ

@@ -1,4 +1,4 @@
-#import "@preview/circuiteria:0.2.1": circuit, element, util, wire
+#import "../src/lib.typ": circuit, element, util, wire
 
 #set page(width: auto, height: auto, margin: .5cm)
 

gallery/test4.typ

@@ -1,5 +1,5 @@
 #import "/src/cetz.typ": draw
-#import "@preview/circuiteria:0.2.1": *
+#import "../src/lib.typ": *
 
 #set page(width: auto, height: auto, margin: .5cm)
 

gallery/test5.typ

@@ -1,5 +1,5 @@
 #import "/src/cetz.typ": draw
-#import "@preview/circuiteria:0.2.1": *
+#import "../src/lib.typ": *
 
 #set page(width: auto, height: auto, margin: .5cm)
 

gallery/test6.typ

@@ -1,5 +1,5 @@
 #import "/src/cetz.typ": draw
-#import "@preview/circuiteria:0.2.1": *
+#import "../src/lib.typ": *
 
 #set page(width: auto, height: auto, margin: .5cm)
 

gallery/test7.typ

@@ -1,4 +1,4 @@
-#import "@preview/circuiteria:0.2.1": circuit, element, util, wire
+#import "../src/lib.typ": circuit, element, util, wire
 
 #set page(width: auto, height: auto, margin: .5cm)
 

manual.typ

@@ -105,7 +105,7 @@ This package provides a way to make beautiful block circuit diagrams using the C
 
 Simply import Circuiteria and call the `circuit` function:
 #pad(left: 1em)[```typ
-#import "@preview/circuiteria:0.2.1"
+#import "@preview/circuiteria:0.2.0"
 #circuiteria.circuit({
   import circuiteria: *
   ...

src/elements/element.typ

@@ -76,7 +76,7 @@
   if (type(x) == dictionary) {
     let offset = x.rel
     let to = x.to
-    let (ctx, to-pos) = coordinate.resolve(ctx, (rel: (offset, 0), to: to))
+    let (ctx, to-pos) = coordinate.resolve(ctx, (rel: (offset, 0, 0), to: to))
     x = to-pos.at(0)
   }
   

src/elements/extender.typ

@@ -91,7 +91,7 @@
     debug: debug
   )
 
-  let in-pos = (rel: (0, h * (h-ratio / 200%)), to: id+".south-west")
+  let in-pos = (rel: (0, h * (h-ratio / 200%), 0), to: id+".south-west")
   let out-pos = (id+".south-east", out-pct, id+".north-east")
   add-port(id, "west", ports.west.first(), in-pos)
   add-port(id, "east", ports.east.first(), out-pos)

src/elements/group.typ

@@ -61,8 +61,8 @@
 
   draw.hide(draw.group(name: id+"-inner", body))
   draw.rect(
-    (rel: (-pad-left, -pad-bottom), to: id+"-inner.south-west"),
-    (rel: (pad-right, pad-top), to: id+"-inner.north-east"),
+    (rel: (-pad-left, -pad-bottom, 0), to: id+"-inner.south-west"),
+    (rel: (pad-right, pad-top, 0), to: id+"-inner.north-east"),
     name: id,
     radius: radius,
     stroke: stroke,

src/elements/logic/gate.typ

@@ -51,7 +51,7 @@
   if (type(x) == dictionary) {
     let offset = x.rel
     let to = x.to
-    let (ctx, to-pos) = coordinate.resolve(ctx, (rel: (offset, 0), to: to))
+    let (ctx, to-pos) = coordinate.resolve(ctx, (rel: (offset, 0, 0), to: to))
     x = to-pos.at(0)
   }
   
@@ -101,7 +101,7 @@
     let port-pos = int-name + ".0"
     if inverted == "all" or port-name in inverted {
       draw.circle(port-pos, radius: inverted-radius, anchor: "east", stroke: stroke)
-      port-pos = (rel: (-2 * inverted-radius, 0), to: port-pos)
+      port-pos = (rel: (-2 * inverted-radius, 0, 0), to: port-pos)
     }
     add-port(
       id, "west",
@@ -113,7 +113,7 @@
   let out-pos = id + ".east"
   if inverted == "all" or "out" in inverted {
     draw.circle(out-pos, radius: inverted-radius, anchor: "west", stroke: stroke)
-    out-pos = (rel: (2 * inverted-radius, 0), to: out-pos)
+    out-pos = (rel: (2 * inverted-radius, 0, 0), to: out-pos)
   }
   add-port(
     id, "east",

src/elements/logic/iec_gate.typ

@@ -62,7 +62,7 @@
   if (type(x) == dictionary) {
     let offset = x.rel
     let to = x.to
-    let (ctx, to-pos) = coordinate.resolve(ctx, (rel: (offset, 0), to: to))
+    let (ctx, to-pos) = coordinate.resolve(ctx, (rel: (offset, 0, 0), to: to))
     x = to-pos.at(0)
   }
   
@@ -103,7 +103,7 @@
         anchor: "east",
         stroke: stroke
       )
-      port-pos = (rel: (-2 * inverted-radius, 0), to: port-pos)
+      port-pos = (rel: (-2 * inverted-radius, 0, 0), to: port-pos)
     }
     add-port(
       id, "west",
@@ -115,7 +115,7 @@
   let out-pos = id + ".east"
   if inverted == "all" or "out" in inverted {
     draw.circle(out-pos, radius: inverted-radius, anchor: "west", stroke: stroke)
-    out-pos = (rel: (2 * inverted-radius, 0), to: out-pos)
+    out-pos = (rel: (2 * inverted-radius, 0, 0), to: out-pos)
   }
   add-port(
     id, "east",

src/elements/ports.typ

@@ -17,10 +17,10 @@
     
     let size = if port.at("small", default: false) {8pt} else {1em}
     let offset
-    if      (side == "north") { offset = (    0, -size) }
-    else if (side == "east")  { offset = (-size,     0) }
-    else if (side == "south") { offset = (    0,  size) }
-    else if (side == "west")  { offset = ( size,     0) }
+    if      (side == "north") { offset = (    0, -size, 0) }
+    else if (side == "east")  { offset = (-size,     0, 0) }
+    else if (side == "south") { offset = (    0,  size, 0) }
+    else if (side == "west")  { offset = ( size,     0, 0) }
 
     let pos1 = (rel: offset, to: pos)
 

src/lib.typ

@@ -1,4 +1,4 @@
-#let version = version(0, 2, 1)
+#let version = version(0, 2, 0)
 #let name = "circuiteria"
 
 #import "circuit.typ": circuit

src/util.typ

@@ -73,45 +73,4 @@
 #let valid-anchors = (
   "center", "north", "east", "west", "south",
   "north-east", "north-west", "south-east", "south-west"
-)
-
-/// Normalizes a coordinate so that 2D points (x, y) are padded
-/// to (x, y, 0) as required by CeTZ's coordinate resolver.
-/// Also handles function-based and dictionary-based coordinates
-/// recursively.
-///
-/// - coord (any): A CeTZ-compatible coordinate
-/// -> any
-#let normalize-coord(coord) = {
-  if type(coord) == array {
-    if coord.len() == 2 {
-      let (a, b) = coord
-      // Raw 2D point: (x, y) -> (x, y, 0)
-      if type(a) in (int, float) and type(b) in (int, float) {
-        return (a, b, 0)
-      }
-      // Function-based coordinate: (fn, point)
-      if type(a) == function {
-        let orig = a
-        return (v => {
-          let result = orig(v)
-          if type(result) == array and result.len() == 2 {
-            let (rx, ry) = result
-            if type(rx) in (int, float) and type(ry) in (int, float) {
-              return (rx, ry, 0)
-            }
-          }
-          return result
-        }, b)
-      }
-    }
-  }
-  if type(coord) == dictionary {
-    let result = (:)
-    for (key, value) in coord {
-      result.insert(key, normalize-coord(value))
-    }
-    return result
-  }
-  return coord
-}
+)

src/wire.typ

@@ -1,5 +1,5 @@
 #import "/src/cetz.typ": draw, coordinate
-#import "util.typ": opposite-anchor, normalize-coord
+#import "util.typ": opposite-anchor
 
 /// List of valid wire styles
 /// #examples.wires
@@ -24,123 +24,29 @@
   return (pts, anchors)
 }
 
-// Normalize an anchor-based placement value used by `zigzag-at`, `u-at`, and
-// the `s-at-*` family.
-//
-// `axis` selects which cartesian component the offset applies to:
-//   - `"x"` → offset in x (used when the placement fixes an x coordinate, e.g.
-//             a vertical bend line for horizontal wire flow).
-//   - `"y"` → offset in y (used when the placement fixes a y coordinate).
-//
-// Accepted forms:
-//   - `none`                              → unset; caller falls back to
-//                                           depth/ratio-based placement.
-//   - `str` / tuple / native CeTZ dict    → passed through as a CeTZ coordinate.
-//   - `(rel: <length>, to: <coord>)` with a *scalar* `rel`
-//                                         → ergonomic axial offset, rewritten
-//                                           to `(rel: (rel, 0), to: to)` for
-//                                           `axis == "x"` or
-//                                           `(rel: (0, rel), to: to)` for
-//                                           `axis == "y"`. If `rel` is already
-//                                           an array/tuple, the value is
-//                                           passed through unchanged.
-#let normalize-scalar-offset(at, axis) = {
-  if at == none { return none }
-  if type(at) == dictionary and "rel" in at and "to" in at and type(at.rel) != array {
-    let r = at.rel
-    if axis == "x" {
-      return (rel: (r, 0), to: at.to)
-    } else {
-      return (rel: (0, r), to: at.to)
-    }
-  }
-  return at
-}
-
-// Backwards-compatible wrapper: translates the old `dir` vocabulary
-// (`"vertical"` / `"horizontal"`) to the `axis` vocabulary used by
-// `normalize-scalar-offset`.
-#let normalize-zigzag-at(at, dir) = {
-  let axis = if dir == "vertical" { "x" } else { "y" }
-  return normalize-scalar-offset(at, axis)
-}
-
-// Try to deduce the cardinal side a port anchor faces by comparing its
-// position to the center of the element it belongs to. Returns none if the
-// anchor is not a port-style anchor (i.e. does not contain "-port-") or if
-// resolution fails.
-#let detect-port-side(anchor, ctx) = {
-  if type(anchor) != str { return none }
-  let sep = "-port-"
-  if not anchor.contains(sep) { return none }
-  let elmt-id = anchor.split(sep).first()
-  let port-pos = none
-  let center-pos = none
-  // coordinate.resolve panics on unknown anchors; there is no try/catch in
-  // Typst, so we assume port anchors created by add-port always come with a
-  // matching group of the same name. If not, the user must set the relevant side parameter
-  // explicitly.
-  let (_, p1) = coordinate.resolve(ctx, anchor)
-  let (_, p2) = coordinate.resolve(ctx, elmt-id + ".center")
-  port-pos = p1
-  center-pos = p2
-  let dx = port-pos.at(0) - center-pos.at(0)
-  let dy = port-pos.at(1) - center-pos.at(1)
-  if calc.abs(dx) >= calc.abs(dy) {
-    return if dx >= 0 { "east" } else { "west" }
-  } else {
-    return if dy >= 0 { "north" } else { "south" }
-  }
-}
-
-#let get-zigzag-wire(pts, ratio, dir, at: none) = {
+#let get-zigzag-wire(pts, ratio, dir) = {
   let start = pts.first()
   let end = pts.last()
-
-  let points
-  if at == none {
-    // Ratio-based placement (default).
-    let mid = if dir == "vertical" {
-      (start, ratio, (horizontal: end, vertical: ()))
-    } else {
-      (start, ratio, (horizontal: (), vertical: end))
-    }
-
-    points = if dir == "vertical" {
-      (
-        start,
-        (horizontal: mid, vertical: ()),
-        (horizontal: (), vertical: end),
-        end
-      )
-    } else {
-      (
-        start,
-        (horizontal: (), vertical: mid),
-        (horizontal: end, vertical: ()),
-        end
-      )
-    }
+  let mid = if dir == "vertical" {
+    (start, ratio, (horizontal: end, vertical: ()))
   } else {
-    // Anchor-based placement: the middle bend segment sits on the axis
-    // extracted from `at` via CeTZ's perpendicular operator `|-`:
-    //   - vertical:   middle segment at x = at.x
-    //   - horizontal: middle segment at y = at.y
-    points = if dir == "vertical" {
-      (
-        start,
-        (at, "|-", start),
-        (at, "|-", end),
-        end
-      )
-    } else {
-      (
-        start,
-        (start, "|-", at),
-        (end, "|-", at),
-        end
-      )
-    }
+    (start, ratio, (horizontal: (), vertical: end))
+  }
+
+  let points = if dir == "vertical" {
+    (
+      start,
+      (horizontal: mid, vertical: ()),
+      (horizontal: (), vertical: end),
+      end
+    )
+  } else {
+    (
+      start,
+      (horizontal: (), vertical: mid),
+      (horizontal: end, vertical: ()),
+      end
+    )
   }
   let anchors = (
     "start": start,
@@ -251,8 +157,8 @@
   let p3 = (center_x, center_y, 0)
 
   // setting up the points for that touch the guides
-  let p2 = (0, 0, 0)
-  let p4 = (0, 0, 0)
+  let p2 = (0,0,0)
+  let p4 = (0,0,0)
   if side-start in ("north", "south") {
     p2 = (horizontal: p3, vertical: p1)
   } else {
@@ -298,9 +204,8 @@
 /// - reverse (bool): If true, the start and end points will be swapped (useful in cases where the start point depends on the end point, for example with perpendiculars)
 /// - directed (bool): If true, the wire will be directed, meaning an arrow will be drawn at the endpoint
 /// - rotate-name (bool): If true, the name will be rotated according to the wire's slope
-/// - zigzag-ratio (auto, ratio): Position of the zigzag middle bend segment relative to the horizontal (or vertical) span, as a fraction between the two endpoints (only with style "zigzag"). Defaults to `auto`, which resolves to `50%`. Panics if combined with an explicitly set `zigzag-at`.
+/// - zigzag-ratio (ratio): Position of the zigzag vertical relative to the horizontal span (only with style "zigzag")
 /// - zigzag-dir (str): The zigzag's direction. As either "vertical" or "horizontal" (only with dstyle "zigzag")
-/// - zigzag-at (none, str, array, dictionary): Optional. Anchor-based placement of the zigzag middle bend segment (only with style "zigzag"). When set, overrides `zigzag-ratio` (which must be left at its default `auto`). The middle segment sits on the axis extracted from the given coordinate: `x` for `zigzag-dir: "vertical"`, `y` for `"horizontal"`. Accepted forms: a raw CeTZ anchor name string (e.g. `"elmt.center"` or `"elmt-port-a"`); any native CeTZ coordinate (tuple, dict such as `(rel: (dx, dy), to: anchor)`); or the ergonomic scalar-offset form `(rel: <length>, to: <coord>)`, which is rewritten to a `(dx, 0)` offset for `"vertical"` and `(0, dy)` for `"horizontal"`. See #examples.zigzag-at
 /// - dodge-y (number): Y position to dodge the wire to (only with style "dodge")
 /// - dodge-sides (array): The start and end sides (going out of the connected element) of the wire (only with style "dodge")
 /// - dodge-margins (array): The start and end margins (i.e. space before dodging) of the wire (only with style "dodge")
@@ -322,9 +227,8 @@
   guided-sides: ("east", "west"),
   directed: false,
   rotate-name: true,
-  zigzag-ratio: auto,
+  zigzag-ratio: 50%,
   zigzag-dir: "vertical",
-  zigzag-at: none,
   dodge-y: 0,
   dodge-sides: ("east", "west"),
   dodge-margins: (5%, 5%)
@@ -336,22 +240,6 @@
   if pts.len() != 2 {
     panic("Wrong number of points (got " + str(pts.len()) + " instead of 2)")
   }
-
-  // `zigzag-at` validation.
-  if zigzag-at != none {
-    if style != "zigzag" {
-      panic("wire '" + id + "': `zigzag-at` requires style: \"zigzag\" (got \""
-        + style + "\")")
-    }
-    if zigzag-ratio != auto {
-      panic("wire '" + id
-        + "': cannot combine `zigzag-at` with an explicit `zigzag-ratio`")
-    }
-  }
-  let zigzag-ratio-effective = if zigzag-ratio == auto { 50% } else { zigzag-ratio }
-
-  // Normalize user-provided coordinates: (x, y) -> (x, y, 0)
-  let pts = pts.map(normalize-coord)
   
   let stroke = (
     paint: color,
@@ -368,12 +256,7 @@
     (points, anchors) = get-direct-wire(pts)
     
   } else if style == "zigzag" {
-    (points, anchors) = get-zigzag-wire(
-      pts,
-      zigzag-ratio-effective,
-      zigzag-dir,
-      at: normalize-zigzag-at(zigzag-at, zigzag-dir),
-    )
+    (points, anchors) = get-zigzag-wire(pts, zigzag-ratio, zigzag-dir)
     
   } else if style == "dodge" {
     (points, anchors) = get-dodge-wire(
@@ -482,17 +365,17 @@
 /// - name-offset (number): The name offset, perpendicular to the stub
 #let stub(port-id, side, name: none, vertical: false, length: 1em, name-offset: 0) = {
   let end-offset = (
-    north: (0, length),
-    east: (length, 0),
-    south: (0, -length),
-    west: (-length, 0)
+    north: (0, length, 0),
+    east: (length, 0, 0),
+    south: (0, -length, 0),
+    west: (-length, 0, 0)
   ).at(side)
   
   let name-offset = (
-    north: (name-offset, length),
-    east: (length, name-offset),
-    south: (name-offset, -length),
-    west: (-length, name-offset)
+    north: (name-offset, length, 0),
+    east: (length, name-offset, 0),
+    south: (name-offset, -length, 0),
+    west: (-length, name-offset, 0)
   ).at(side)
 
   draw.line(

typst.toml

@@ -1,6 +1,6 @@
 [package]
 name = "circuiteria"
-version = "0.2.1"
+version = "0.2.0"
 compiler = "0.15.0"
 repository = "https://git.kb28.ch/HEL/circuiteria"
 entrypoint = "src/lib.typ"
@@ -9,6 +9,6 @@ authors = [
 ]
 categories = [ "visualization" ]
 license = "Apache-2.0"
-description = "Drawing block circuits made easy, using CeTZ"
+description = "Drawing block circuits with Typst made easy, using CeTZ"
 keywords = [ "circuit", "block", "draw" ]
 exclude = [ "gallery", "justfile", "doc" ]